Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
carsten_h wrote: > > > How is it possible that an USB stick is write protected? What happened > there? This could be your stick dying. Happened to me, too. ElFishi's Profile: http://forums.slimdevices.com/member.php?userid=15528 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
ElFishi wrote: > This could be your stick dying. Happened to me, too. :-( I would say it is dead. But it is maybe six months old. Strange. Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for Hifiberry and Bluetooth headphone; two Airport Express carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Hi all, I have noob question. -Is it possible to have two USB2/USB3 ports activated at the same time on the PiCorePlayer (RP4) and loaded/populated with two identical USB-interfaces. (example: Amanero with identical firmwares)? /Jan JaMo's Profile: http://forums.slimdevices.com/member.php?userid=56386 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
paul- wrote: > Sync settings and buffers are set in LMS Server settings.on the > player menu for each player. Yes, I see those settings. Which setting would alleviate the problem I am having with a Raspberry Pi pausing often for as long as 30 seconds or so when synced? Or I do I have another problem? Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Once they loose sync, sometimes weird things happen. But if your seeing that large of a pause, it is most likely network related. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
JaMo wrote: > Hi all, > > I have noob question. -Is it possible to have two USB2 or two USB3 ports > activated at the same time on the PiCorePlayer (RP4) and > loaded/populated with two identical USB-interfaces. (example: Amanero > with identical firmwares)? > Could it work at all? > /Jan As long as you don't draw too much power from the USB ports, you should be able to run all USB ports at the same time..even add a hub and run more. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
paul- wrote: > Once they loose sync, sometimes weird things happen. But if your seeing > that large of a pause, it is most likely network related. After doing lots of swapping things around, I have determined that having 2 Raspberry Pies plugged into the same DAC (In this case a Teac Ud-301), one into the USB port and 1 into the Coaxial port will cause this problem only when the two players are synchronized. If I am just playing each Rpie and they are not synced, they play just fine. The problem is very noticeable at 192Khz material. Now that I understand it, I can just avoid this. You may be able to explain this phenomenon, as I cannot. Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] AUDIOPHONICS RASPDAC MINI Kit
I have managed to get a remote to work. I have a Harmony 650 and read that it supported the squeezebox touch remote. Installed picoreplayer's default LIRC files, set GPIO pin to 4 and it's all up and running with the Harmony. kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141 View this thread: http://forums.slimdevices.com/showthread.php?t=112288 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Correctly handle USB Speakers with piCorePlayer (6.0.0)?
Hello! I have a piCorePlayer 6 installation with LMS and to use it also as a headless player I attached USB Harmon Kardon Soundsticks to it. To get good results for volume I had to use alsamixer: 30579 I saved it using the website: 30580 If I am not using alsamixer the music is nearly off at 50% volume setting, it is at normal hearing volume when I use 85% volume setting. At 100% is is a little bit louder. This is a very strange setting, so I used alsamixer to use the whole volume control and not only a part of it. Because I not always use the Soundsticks, I am switching them off. But after switching them back on the values for alsamixer are switched to this: 30581 If I am doing a restart of squeezelite then, nothing changes. The value for alsamixer is not restored. Also if I am doing a reboot of the whole Pi nothing is restored. What do I have to do to get the alsamixer value back after switching on the speakers and after a reboot? This are the values I used on the squeezelite page: Audio output device settings: USB audio Output settings: hw:CARD=SoundSticks,DEV=0 These are the possible values there: 30582 ALSA setting: 80-4--1- What do I have to do to handle this correctly? What I am doing wrong? +---+ |Filename: Bildschirmfoto 2020-06-04 um 17.21.02.png| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30582| +---+ Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for Hifiberry and Bluetooth headphone; two Airport Express carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCore On- and Off Button
Another option is to buy a USB cable with a switch. This is not fancy stuff ... but I thought I'd mention this option here. There are severel in the market with USB-micro (for Pi 3, etc) and recently this one was announced for the Pi 4: https://thepihut.com/products/usb-c-cable-with-switch /Claus cfuttrup's Profile: http://forums.slimdevices.com/member.php?userid=32784 View this thread: http://forums.slimdevices.com/showthread.php?t=112341 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Did you make a fresh install for each raspberry pi or use the same backup image ? ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Correctly handle USB Speakers with piCorePlayer (6.0.0)?
When you have adjusted the level via alsamixer Esc sudo alsactl store pcp br try and see ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Man in a van wrote: > Did you make a fresh install for each raspberry pi or use the same > backup image ? > > ronnie If this is a question for me, I did an insitu update for all of my Rpies. Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Yep, it was :) I run two pi into the same dac, one is pCP player via USB and the other RaspiOS (squuezelite Digione) into a co-ax rca. I have not tried syncing, but will give it a go later today, or tomorrow. I would suggest a fresh install for both pi--only a few minutes. I think I have seen some debate about which player one should use as Master but that might be a mis-memory :confused:, you could always swapping them over :) ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Man in a van wrote: > Yep, it was :) > > I run two pi into the same dac, one is pCP player via USB and the other > RaspiOS (squuezelite Digione) into a co-ax rca. > > I have not tried syncing, but will give it a go later today, or > tomorrow. > > I would suggest a fresh install for both pi--only a few minutes. > > I think I have seen some debate about which player one should use as > Master but that might be a mis-memory :confused:, you could always > swapping them over :) > > > ronnie As I had indicated, I ONLY have the problem when Syncing, otherwise they both play just fine. I have tried different Rpies and have swapped the Master for syncing, and it doesn't seem to matter. The Player on the USB will always play perfectly, regardless of being a Master or Not. It's the Player on the Coax that will Pause. And at 192Khz (Hi Bit Rate material), it will be paused much longer than it will Play And it may be Specific to my DAC. Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCore On- and Off Button
If your system is only a player, then the on/off switch is a cheap/easy option. No need to shutdown the system If your system is also enabling LMS in piCorePlayer, then you need to do a controlled shutdown before killing the power. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=112341 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Correctly handle USB Speakers with piCorePlayer (6.0.0)?
It sounds like you are starting the system with the speakers powered off, or are disconnecting and then reconnecting them. The only solution is to build creative udev rules. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ADAU1701 with piCorePlayer?
Hello, I try to get an ADAU1701 (Sure DAC) running with: - Raspberry Pi Zero Wh - piCorePlayer6.0.0.img *** Planned system: Logitech Media Server (LMS) Raspberry Pi 4 with piCorePlayer -> LAN -> Router -> WLAN... Speaker right WLAN -> Squeezelite (Raspberry Pi Zero Wh with piCorePlayer) -> i2s -> ADAU1701 (Sure DAC) -> 2 way amplifier -> 2 way speaker Speaker left WLAN -> Squeezelite (Raspberry Pi Zero Wh with piCorePlayer) -> i2s -> ADAU1701 (Sure DAC) -> 2 way amplifier -> 2 way speaker *** Following steps I have done to get Squeezelite running with ADAU1701 (Sure DAC) : - Write image to sd card - Copy following files to sd card with windows explorer - wpa_supplicant.conf (with ssid and psk), path pcp_boot/ (to get wlan access to Raspberry Pi Zero Wh) - adau1701-i2s.dtbo, path pcp_boot/overlays/ (adau1701-i2s.dtbo from following source: ...github.com/fvzeppelin/ADAU1701-I2S-Audio-Driver-for-Raspberry-Pi) - Change file content of pcp_boot/config.txt - Search following line and comment with hash: #dtparam=audio=on - Add the following line at the end of the file: dtoverlay=adau1701-i2s After starting Raspberry Pi Squeezelite is not running. Which settings on Squeezelite are necessary? I changed follow Squeezelite settings: (- Audio output device settings: Analog audio (default, no change)) - Output setting: sysdefault:CARD=Output (default: hw:CARD=ALSA) - Max sample rate (-r): 48000 - Upsample setting (-R): vLX After saving, Squeezelite is running. - When LMS sends music to Speaker right, there is sound, but with a lot of noise. - For test, LMS sends to synchronized speaker group with bluetooth speaker and Speaker right, bluetooth speaker has sound with no noise. - Speaker right test with Volumio image and changes for ADAU1701 (Sure DAC): -> Sound with no noise when Volumio is source of sound -> Music with a lot of noise, when Volumio works as Squeezelite player and get sound from LMS. I have no idea to solve the noise problem, could anyone help me, please? sound's Profile: http://forums.slimdevices.com/member.php?userid=70285 View this thread: http://forums.slimdevices.com/showthread.php?t=110964 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Man in a van wrote: > Yep, it was :) > > I run two pi into the same dac, one is pCP player via USB and the other > RaspiOS (squuezelite Digione) into a co-ax rca. > > I have not tried syncing, but will give it a go later today, or > tomorrow. > > ronnie Well, I was curious about this problem being DAC dependent, so I hooked up my Cambridge Dac Magic 100 and was able to reproduce the problem. So, it is not DAC Specific to my Teac. Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Correctly handle USB Speakers with piCorePlayer (6.0.0)?
paul- wrote: > It sounds like you are starting the system with the speakers powered off Sometimes that is the case, correct. paul- wrote: > are disconnecting and then reconnecting them. This is often the case. paul- wrote: > The only solution is to build creative udev rules. That sounds like deep digging inside the system. I found out, that it is enough to call (thanks for the idea "Man in a van"!): sudo alsactl restore after switching on the speakers. So I can write an automation in Home Assistant to not only switch on the speakers, but also to call this command via ssh. This should be working. Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for Hifiberry and Bluetooth headphone; two Airport Express carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Correctly handle USB Speakers with piCorePlayer (6.0.0)?
yes, if you can run a ssh session/script from automation, then that works. The device has to be present to be able to restore the settings. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ADAU1701 with piCorePlayer?
Most likely, you have an inconsistent i2s configuration. Have you checked the wiring and ADAU1701 config as described in the original repo: https://github.com/MKSounds/ADAU1701-I2S-Audio-Driver-for-Raspberry-Pi#settings-of-the-adau1701 fvzeppelin's Profile: http://forums.slimdevices.com/member.php?userid=65388 View this thread: http://forums.slimdevices.com/showthread.php?t=110964 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ADAU1701 with piCorePlayer?
I have installed another sd card with Volumio (with changes described from MKSounds). Then I have sound without noise. When I put the other sd card with piCorePlayer into raspberry I get sound with noise (no other changes in hw, wiring or ADAU1701 config). Because of that I thought there must be a problem with piCorePlayer settings, is that conclusion right? I'm a beginner with ADAU1701 and i2s so maybe there are typical beginner failures. Many thanks for your support. sound's Profile: http://forums.slimdevices.com/member.php?userid=70285 View this thread: http://forums.slimdevices.com/showthread.php?t=110964 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
