Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > Then that suggests the new keytable is not being accepted and therefore > the new keytable is not being saved > > I had this scenario (I think) when my conf file had an invalid format. > > I will try and find the post, I think Ralphy found the error. > > Jeff That would be good. You did discuss remote control problems on 2019 08 03 but I do not understand it. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
hi AlecSp, Thanks for testing. I think if your wifi network is what I consider "normal" then everything works great. It's the networks that are just a little "different" (to me) that we have issues and I am not good at comprehending these situations so I can't help much. I am working on the wifi documentation to make things clearer, as requested in another thread. Hopefully this will explain things better and help people get results quicker in fringe cases. regads Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Greg Erskine wrote: > Most of my test pCP are wifi, it takes about 5 minutes to setup a player > from scratch. So I know it works. This got me intrigued, too. As a wired pCP user, I tried enabling and configuring the Wi-Fi connection just now. All worked perfectly straight away, and it took me no longer than 30 seconds to configure. Simply enable Wi-Fi, then I entered the SSID, the password, the country code. Then Main Page -> Shutdown, remove the network cable, then restart the Pi. All tickety boo. Server: LMS 8.1.1 on piCorePlayer 7.0.0 on Pi 4B 2GB with library on 512GB USB drive Listening on: 2 x Squeezebox Radios 8.0.1 , and direct from the Pi using a Behringer UCA202 USB audio interface AlecSp's Profile: http://forums.slimdevices.com/member.php?userid=42763 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
diode84 wrote: > ssh does clear the keytables and no remote works at all. > When I upload diodes keytables it asks for a reboot. After a reboot the > justboom remote works, the Phillips does not. Then that suggests the new keytable is not being accepted and therefore the new keytable is not being saved I had this scenario (I think) when my conf file had an invalid format. I will try and find the post, I think Ralphy found the error. Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X&p=903953&viewfull=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Simple Linux OS for Jivelite, LMS on PC
diode84 wrote: > Thats interesting Steve, I have run DietPi on it before. How did you > install LMS? > I don't need a touchscreen. It is pretty simple and takes about 15 minutes. install DietPi and run the initial setup and update. In Dietpi-Config Change locale to en_NZ.UTF8 Change time zone to Pacific/Auckland Using DietPi-Software, select Samba and LMS then Install selected software. I'm using an SSD, so to set that up: Plug in the SSD and check dmesg to see if there were any problems accessing it. apt-get install gdisk run gdisk and create 1 x 8GB partition and 1 x remainder sudo mke2fs -t ext4 -L rootfs /dev/sda1 sudo mke2fs -t ext4 -L shared /dev/sda2 run dietpi-drive_manager format both partitions on the SSD and then transfer the root file system to SSD. mount sda1 as /mnt/rootfs mount sda2 as /mnt/shared reboot & test create directories for music and playlists. mkdir /mnt/shared/music mkdir /mnt/shared/playlists The hardest part for me was setting up Samba. I wanted to set up an unrestricted shared folder, which worked fine from my Mac but not from my brother's PC. Current versions of Windows require that you have a user code and password for your remote share, so you need to set up a user account in DietPi just to give you access to the shared directories. adduser admin passwd admin smbpasswd -a admin Then in /etc/samba/smb.conf [music] comment = Music Folder path = /mnt/shared/music browsable = yes guest ok = no read only = no valid users = admin create mask = 0777 directory mask = 0777 That should get you going. I've set up 3 HC1s so far - two for me and one for my brother. As a DIY project it is as simple as it gets and they work really well. I can see the benefit of someone else managing software updates for me which is why I have ordered a couple of the Core-32 micro servers devices from Polyvection to try out. Cheers, Steve Steve Agnew's Profile: http://forums.slimdevices.com/member.php?userid=840 View this thread: http://forums.slimdevices.com/showthread.php?t=114159 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Man in a van wrote: > Just install google translate on the chrome browser :) > I would think that you might be better off with raspberry pi OS Lite, > and adapt these install instructions > Moode audio > http://moodeaudio.org/forum/showthread.php?tid=147 > and another one > http://http://moodeaudio.org/forum/showthread.php?tid=550 > This thread has links > http://forum.audiophonics.fr/viewtopic.php?f=5&t=1765#p7070 > Or maybe even Max2Play > There are details for the power button on the old raspbian, which should > still work > https://github.com/audiophonics/Raspberry-pwr-management > good luck > ronnie Thank you again, Ronnie. I will give it a go, as per the above, but will have to find the time. For the record, I got a response from Audiophonics themselves, who had this to say, referring to insufficient / irregular Python support in pCP: > Hello, > > No, it's really hard to manage display with Picore player as Python is > not properly supported. > > Only LMS solution available with display will be the Dietpi image. > > Cordialement. The Diet Pi image can be found 'here' (https://www.audiophonics.fr/en/blog-diy-audio/23-start-up-evo-raspdac-rasptouch-raspdac-mini-with-a-pre-configured-image.html). Best regards, jasc audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 7.0.1 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.1.2' (http://downloads.slimdevices.com/nightly/index.php?ver=8.1) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > Hmmm > > Yes I see you're point when I clear the keytable the remote stops > working immediately > > > Code: > > > tc@SqueezeBox-Pcp-Lounge:~$ sudo ir-keytable -p all -c > Old keytable cleared > Protocols changed to other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon > tc@SqueezeBox-Pcp-Lounge:~$ > > > > > Something less obvious then I guess. > > Jeff ssh does clear the keytables and no remote works at all. When I upload diodes keytables it asks for a reboot. After a reboot the justboom remote works, the Phillips does not. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Warning regarding a type of USB Flash drive!
Hello! In the last months two of my USB 3.1 flash drives can not longer be written, they are only readable. One (32GB) I had used inside a Raspberry Pi 4 with piCorePlayer installation and LMS where it was used for the LMS database. The other one (16GB) was used in a Pi 3B+ with piCorePlayer installation and Jivelite (7" Raspberry display). Both are working fine before for months and then suddenly they are only readable. I got for both of them the money back, that was no problem, but I don't think that these two are the only ones with that problems. This is the link to that type of Flash drive: https://shop.westerndigital.com/products/usb-flash-drives/sandisk-ultra-fit-usb-3-1#SDCZ430-016G-A46 I can not recommend them! I don't know if this is the correct forum for this message, but I didn't found a better one. pi4 4gb picoreplayer with lms and squeezelite for usb inside an argon one case pi3b+ (7\" display, hifiberry dac+ pro) picoreplayer with squeezlite/jivelite for hifiberry and bluetooth headphone inside a smartipi touch case two airport express ikea symfonisk carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=114178 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Hmmm Yes I see you're point when I clear the keytable the remote stops working immediately Code: tc@SqueezeBox-Pcp-Lounge:~$ sudo ir-keytable -p all -c Old keytable cleared Protocols changed to other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon tc@SqueezeBox-Pcp-Lounge:~$ Something less obvious then I guess. Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X&p=903953&viewfull=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
One I can see straight away is the capitals in the code "rc-5" Jeff I have changed it to rc-5 but that doesn't explain why The Justboom remote still works after I ssh (sudo ir-keytable -p all -c) Any clues. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Cutting and pasting has lost the formatting, here's a couple of mine in Notepad++ with "Show All Symbols" selected 33820 33821 See it there is any difference One I can see straight away is the capitals in the code "rc-5" Jeff +---+ |Filename: 2021-03-18 18_00_17-__SERVERONE_Masters_Squeezebox Stuff_Players (Hardware Pi Wand etc)_Picorepl.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33821| +---+ *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X&p=903953&viewfull=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > No I would have thought not. > > Sounds like the new conf isn't being accepted for some reason. > > post your conf file I'll see if I can see anything obvious > > Jeff # table: philips, type: RC-5 0x458 KEY_UP 0x459 KEY_DOWN 0c45b KEY_RIGHT 0x45a KEY_LEFT 0x45c KEY_ENTER 0x42c KEY_PLAYPAUSE diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > No I would have thought not. > > Sounds like the new conf isn't being accepted for some reason. > > post your conf file I'll see if I can see anything obvious > > Jeff How can I send config.txt, is copy text and paste to reply any good. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
diode84 wrote: > I renamed it diodeskeytables.conf but that made no difference. > If I ssh (sudo ir-keytable -p all -c) and save and reboot should the > Justboom remote still work > because it does. No I would have thought not. Sounds like the new conf isn't being accepted for some reason. post your conf file I'll see if I can see anything obvious Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X&p=903953&viewfull=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > Have you tried without the capital "D" I seem to remember the GUI had > issues with filename format in the dim and distant past > > Jeff I renamed it diodeskeytables.conf but that made no difference. If I ssh (sudo ir-keytable -p all -c) and save and reboot should the Justboom remote still work because it does. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
diode84 wrote: > > I deleted all keytables with (sudo ir-keytable -p all -c), then with web > ui installed Diodeskeytables.conf. > diode84 Have you tried without the capital "D" I seem to remember the GUI had issues with filename format in the dim and distant past Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X&p=903953&viewfull=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Hello I have a new install of pCP7 on a Pi 3B. I am having problems installing a keytables.conf that I made a while ago. I have a Justboom remote working but the problem comes when I try to install my keytable for a Phillips remote. It did work with the old Pi but not now. I deleted all keytables with (sudo ir-keytable -p all -c), then with web ui installed Diodeskeytables.conf. The Phillips remote does not work but the Justboom still does. I don't seem to be deleting keytables. What am I doing wrong. Any help appreciated. Thanks diode84 diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Simple Linux OS for Jivelite, LMS on PC
Steve Agnew wrote: > I'm running LMS on an Odroid HC1 using DietPi Linux which was very easy > to get working. DietPi is available for X86 so maybe that would be a > good option to try just for LMS. I don't know how you would get on > hooking up a touchscreen and running Jivelite, but piCorePlayer is > perfect for that. > > Regards, Steve. Thats interesting Steve, I have run DietPi on it before. How did you install LMS? I don't need a touchscreen. diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=114159 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
farawayluke wrote: > Hi, > > I am new to the forum so apologies if this is not the right place to > post this, or this has already been answered. I tried using the search > function but could not see an answer. > > Does anyone know if picoreplayer will work with the (original, v1) JDS > Element dac/amp and if so what settings should be used? I could not see > an option on the drop down menu, and I am not sure what chip this dac > uses. > > I would be buying a Pi to use for this. > > Many thanks, > Neil According to the spec https://jdslabs.com/product/the-element/ I would think it should, check in dmesg to see if it is recognised (you need to select usb in squeezelite, then se what is in the audio output) ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Hi, I am new to the forum so apologies if this is not the right place to post this, or this has already been answered. I tried using the search function but could not see an answer. Does anyone know if picoreplayer will work with the (original, v1) JDS Element dac/amp and if so what settings should be used? I could not see an option on the drop down menu, and I am not sure what chip this dac uses. Many thanks, Neil farawayluke's Profile: http://forums.slimdevices.com/member.php?userid=71516 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix