[SlimDevices: Unix] 32-bit WAP working fine, but 64-bit WAP locks up
Hi, My WAP always worked in 32-bit for my RPi 3A+. I recently tried the 64-bit and everything seems to be working the same as the 32-bit, but there are WAP issues. It downloads fine. It doesn't start tho. When you modify WAP settings it locks up and you have to pull the power. It will never start or restart or start on reboot. I gave up and went back to 32-bit, but if this is resolved please post. I prefer the 64-bit given the option. Cheers LiFePO4's Profile: http://forums.slimdevices.com/member.php?userid=71240 View this thread: http://forums.slimdevices.com/showthread.php?t=114436 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Cannot allocate FULL 4GB Buffer Size in Squeezelite on RPi 8GB
I recently noticed there was a 64-bit version of PcP. I believe it fixed this issue. I was able to enter the full 4GB and it restarted. Unfortunately, my audio system is in flux and I only tested for less than a minute. No listening tests. I have moved on to a 12V low latency realtime kernel i9 PC build and re-purposed the 8GB RPi. Many thanks. LiFePO4's Profile: http://forums.slimdevices.com/member.php?userid=71240 View this thread: http://forums.slimdevices.com/showthread.php?t=114040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Hi, i have some problem running LCDApi on piCorePlayer 7.0. It throws an EAFNOSUPPORT error, so i tried to investigate futher and found that it looks like ipv6 is not enabled. My ifconfig shows only ipv4 address, while my previous piCorePlayer 6.0.0 version showed both ipv4 and ipv6 address. So i tryed to load ipv6 module: tc@piCorePlayer:~$ sudo modprobe ipv6 modprobe: FATAL: Module ipv6 not found in directory /lib/modules/5.4.83-pcpCore-v7l while in picoreplayer 6.0.0 module ipv6 is loaded ok. sudo find / -name "ipv6" return nothing. in the extensions section of setting, it looks like ipv6-5.4.83-pcpCore-v7l-pcpCore_v8.tcz is installed, but i can't find it in optional: tc@piCorePlayer:~$ sudo find / -name "ipv6-5.4.83-pcpCore-v7l-pcpCore_v8.tcz" found nothing. what's wrong? Thank you Emanuele emanue|e's Profile: http://forums.slimdevices.com/member.php?userid=70721 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 6 and watchdog timer?
After 26d of working fine, my time display has just locked up. Cron has this: 30 2 5,21 * * pkill -x /opt/jivelite/bin/jivelite Any suggestions for diagnosis/remedy before I reboot it? mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044 View this thread: http://forums.slimdevices.com/showthread.php?t=113247 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] picoreplayer: how to configure ethernet port 10M autonego off full duplex ?
paul- wrote: > Put it in /opt/bootlocal.sh > > Put it before the piCorePlayer startup. I have a similar issue. I have a simple ethernet switch which does only support 100mbs. For uknown reason this switch fails during autonegotioation (related to this LINK_REMOVED) and therefore I'm not getting a link to the picoreplayer. The picoreplayer is running on a raspberry pi 4. As a workaround I found a hint, that I have to force the raspberry pi to 100mbs. I wanted to use ethtool for this, but I can't find it on the picoreplayer. Is there any other way to force the raspberry pi with picoreplayer to 100mbs? Or can I install the ethtool on the picoreplayer? So long Jeremia Jeremia's Profile: http://forums.slimdevices.com/member.php?userid=71691 View this thread: http://forums.slimdevices.com/showthread.php?t=112534 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS service running on Ubuntu 16.04, but not reachable
Paul Webster wrote: > anything in the LMS server.log? Where is the log at? I looked for one but couldn't find it. Egnix's Profile: http://forums.slimdevices.com/member.php?userid=239 View this thread: http://forums.slimdevices.com/showthread.php?t=114432 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer and wifi Access Point in Bridge mode
Some more info after reinstalling a clean copy of pCP 7 on the machine. Still no HDMI output so I'm unwilling to commit settings again. >From the web GUI I installed AP mode. Then I tried the commands the OP posted and I am in the same boat. Code: tc@carmel:~$ brctl addbr br0 add bridge failed: Package not installed tc@carmel:~$ sudo modprobe bridge modprobe: ERROR: could not insert 'bridge': Unknown symbol in module, or unknown parameter (see dmesg) tc@carmel:~$ dmesg | tail -10 [ 4559.489816] bridge: Unknown symbol stp_proto_unregister (err -2) [ 4607.253591] bridge: Unknown symbol llc_mac_hdr_init (err -2) [ 4607.253747] bridge: Unknown symbol stp_proto_register (err -2) [ 4607.254296] bridge: Unknown symbol stp_proto_unregister (err -2) [ 4607.306084] bridge: Unknown symbol llc_mac_hdr_init (err -2) [ 4607.306287] bridge: Unknown symbol stp_proto_register (err -2) [ 4607.306944] bridge: Unknown symbol stp_proto_unregister (err -2) [ 4628.110633] bridge: Unknown symbol llc_mac_hdr_init (err -2) [ 4628.110774] bridge: Unknown symbol stp_proto_register (err -2) [ 4628.111217] bridge: Unknown symbol stp_proto_unregister (err -2) tc@carmel:/tmp/tcloop/net-bridging-5.4.83-pcpCore-v7/usr/local/lib/modules/5.4.83-pcpCore-v7/kernel/net/bridge$ modinfo ./bridge.ko filename: /tmp/tcloop/net-bridging-5.4.83-pcpCore-v7/usr/local/lib/modules/5.4.83-pcpCore-v7/kernel/net/bridge/./bridge.ko alias: rtnl-link-bridge version:2.3 license:GPL srcversion: 7C04551615E1E32D1EE5353 depends:stp,ipv6,llc intree: Y name: bridge vermagic: 5.4.83-pcpCore-v7 SMP mod_unload modversions ARMv7 p2v8 Looking at /tmp/tcloop/pcp-apmode/usr/local/bin/pcp-apmode, it is clear that set_bridge_on() can't work unless brctl addbr br0 succeeds. Unfortunately looking at the list of available extensions, I am not sure where to load the stp and llc modules the bridge module expects from Code: tc@carmel:/proc$ sudo modprobe configs tc@carmel:/proc$ zcat /proc/config.gz | grep -i llc CONFIG_LLC=m # CONFIG_LLC2 is not set tc@carmel:/proc$ zcat /proc/config.gz | grep -i stp CONFIG_BRIDGE_EBT_STP=m CONFIG_STP=m CONFIG_GPIOLIB_FASTPATH_LIMIT=512 # CONFIG_MFD_STPMIC1 is not set I also found this previous post on the same problem: https://forums.slimdevices.com/showthread.php?113625-piCorePlayer-WiFi-Ethernet-network-bridge-(Difficulty-with-module-dependencies) HTH 2 SB 3 1 PCP 6 Libratone Loop, Zipp, Zipp Mini iPeng (iPhone + iPad) LMS 7.9 (linux) with plugins: CD Player, WaveInput, Triode's BBC iPlayer by bpa IRBlaster by Gwendesign (Felix) Smart Mix, Music Walk With Me, What Was That Tune? by Michael Herger PowerSave by Jason Holtzapple Song Info, Song Lyrics by Erland Isaksson AirPlay Bridge by philippe_44 WeatherTime by Martin Rehfeld Auto Dim Display, SaverSwitcher, ContextMenu by Peter Watkins. epoch1970's Profile: http://forums.slimdevices.com/member.php?userid=16711 View this thread: http://forums.slimdevices.com/showthread.php?t=114369 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Brill - thanks Ralphy, now the digital clock works. The others don't though. I can live with that, but i would really like the dot matrix or analog clocks ! Am I right in thinking this may be due to some tests in the script which i have missed to add the Wav35skin into ? also - can you tell me where the debug logs turn up please as i cant see them in /var/log ! By the way thanks to you and all the guys working on this for many years - i first installed pcp about 6 years ago and it was great then - but now it is stand out amazing - in fact better than the original :-) ! - Charlie chazza's Profile: http://forums.slimdevices.com/member.php?userid=64267 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer and wifi Access Point in Bridge mode
Well, well. I wasn't aware bridged AP mode was a thing in piCore. I have one player running pCP v7 that I installed recently. So I went about and clicked my way through setting up AP mode (downloads went well apparently), bridged mode (doesn't seem to get concerned with the IP address field just above it). And then I pressed the start button (or something like that, I don't have the GUI in front of me anymore, now ;) I thought that would start an AP bridged with eth0 and clients would be part of the main LAN. Last thing I saw was a trace mentioning IP address 10.10.10.1, which is useless on my network, and possibly in this scenario, too. Alas, the headless machine has now sailed away. It's not in a 10.10.10.0/24 network, either on wifi or ethernet. It doesn't have an mDNS published address. Perhaps it has a zeroconf address but I didn't scan long enough to find it. In other words, it feels a little bit like a brick. I will get myself out of trouble, no worries. But either there is somehow room for improvement for the unsuspecting user merrily clicking through the GUI, or there is a bug in that feature in v7. 2 SB 3 1 PCP 6 Libratone Loop, Zipp, Zipp Mini iPeng (iPhone + iPad) LMS 7.9 (linux) with plugins: CD Player, WaveInput, Triode's BBC iPlayer by bpa IRBlaster by Gwendesign (Felix) Smart Mix, Music Walk With Me, What Was That Tune? by Michael Herger PowerSave by Jason Holtzapple Song Info, Song Lyrics by Erland Isaksson AirPlay Bridge by philippe_44 WeatherTime by Martin Rehfeld Auto Dim Display, SaverSwitcher, ContextMenu by Peter Watkins. epoch1970's Profile: http://forums.slimdevices.com/member.php?userid=16711 View this thread: http://forums.slimdevices.com/showthread.php?t=114369 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Alpine Linux on Dell M300
ralphy wrote: > Yes, I'm still using it with v3.11.2 and a hard disk connected to the > sata port without any issues. > > The only alpine packages I've updated are squeezelite and the kernel to > 5.5.19. > > I really should update the kernel but the m300 has been solid. > > I'm running LMS from git on it now so I haven't been updating those. Good to know, it bugs me that I haven't been using my M300's for anything, old tech but nice looking enclosure! sodface's Profile: http://forums.slimdevices.com/member.php?userid=19057 View this thread: http://forums.slimdevices.com/showthread.php?t=111730 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Greg Erskine wrote: > You could be lucky but I expect further issues. Cross the fingers for me :) Greg Erskine wrote: > Can RasPi Check issue a "sudo -s" as the first command? > > I use this to elevate tc to root in winSCP. Yes that's what I do with WinSCP, too. But with RaspiCheck the interface is simple /clear. I can't find anything like that: 34321 I guess at this point I've to give up if there is no way to give 'tc' elevate rights +---+ |Filename: Screenshot_20210422-145025_RasPi Check.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34321| +---+ lms: version: 8.2.0 - 1616690655 @ thu mar 25 18:15:21 cet 2021 on rpi4/ raspbian buster 10 pointed (nfs) to musiclibrary on qnap ts212 squeeze-players: duet - cntrl-fw: 8.0.1-r16844/ receiver-fw: 77 2x radio - fw: 8.0.1-r16844 rpi 2b - pcp 7.0.1/ squeezelite v1.9.9-1372-pcp transporter - fw: 87 softsqueeze 3.9.2 on win 10 / squeezeplay 8.0.1r1343 on win 10 squeeze player 1.3.21 on s7/android 8.0.0 controller: android phone - squeezer 2.2.4/ material skin 2.3.5 MichaelPr's Profile: http://forums.slimdevices.com/member.php?userid=68465 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
chazza wrote: > I have a RPI 2B with PCP 7.0.0 and Jivelite running nicely on a 3.5 inch > Waveshare LCD (Wav35Skin) > > However, I think i need to edit ClockApplet.lua to get the clock > screensaver working as there is no entry in the script for the Wav35skin > and, of course, when setting the screensaver to e.g. DotMatrix or > digital clock, there is no display. > > I think all i need to do is add 'Wav35Skin' to the _isWQVGASkin function > as per below: > > local function _isWQVGASkin(skinName) > if skinName == 'WQVGAsmallSkin' or skinName == 'WQVGAlargeSkin' or > skinName == 'Wav35Skin' then > return true > end > end > > But, because the mounted FS is read only i am stuck - i cant find any > way to edit this file - help please :-) ! > > Thanks Connect to pcp via ssh then copy the clock applet using these commands. cd /home/tc/.jivelite/userpath/applets sudo cp -Lr /opt/jivelite/share/jive/applets/Clock . sudo chown -R tc Clock Then you can edit /home/tc/.jivelite/userpath/applets/ClockApplet.lua Restart jivelite using the Quit menu option and when JL restarts it will find and load the modified Clock applet files instead of the readonly version. Make sure you BACKUP the pcp configuration before you reboot, otherwise your changes will be lost. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS service running on Ubuntu 16.04, but not reachable
anything in the LMS server.log? Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=114432 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Alpine Linux on Dell M300
sodface wrote: > Cool! I was watching this thread but didn't have any ideas to jump in > with, glad you got it working. Your timing is funny because I was just > thinking about the stack of M300's I have and whether I should go back > and update all the armel packages to see if I still have the data > corruption issues that made me give up the first time around. > > @ralphy, are you still using the M300's with Alpine? Any issues? Yes, I'm still using it with the hard disk connected to the sata port without any issues. The only alpine packages I've updated are squeezelite and the kernel to 5.5.19. I really should update the kernel but the m300 has been solid. I'm running LMS from git on it now so I haven't been updating those. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=111730 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] LMS service running on Ubuntu 16.04, but not reachable
I installed LMS on an Ubuntu 16.04 box using the logitechmediaserver_8.1.1_amd64.deb package. After installing it, I was able to access the web server at :9000 and saw it asking me to log into my mysqueezebox account. I did this just make sure it was installed correctly. I then changed the network config from using DHCP to a static IP and rebooted. Ever since then I can't access the webpage and I don't see anything serving port 9000 when I run "netstat -a". I did find and changed the "allowedhosts" in the config file, but that didn't help anything. Anyone know what I need to do to fix this? Egnix's Profile: http://forums.slimdevices.com/member.php?userid=239 View this thread: http://forums.slimdevices.com/showthread.php?t=114432 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer - JiveLite brightness settings menu
chazza wrote:
> Hi there, i am almost done putting the following together: RPi2 +
> Waveshare 3.5" TScreen + DAC + IR remote - but .
>
> I have hacked the Touchscreen as descrbied in the forums with a
> transistor and i have the pigpio extension added and it works through
> the brightness settings control - hurrah !
>
> However, once i am in the brightness menu, i can't get out as i am using
> a Slim Devices remote. The display says to use Home or Escape to exit
> !!
>
> I had a look at PiCorePlayer Applet in the repo and it looks like i need
> to shange the following lines - but i'm not sure how to -> I guess i
> want to use the left / back button the remote to exit as per all other
> menus - Help please ?
>
> popup:addActionListener("back", self,
> cancelBrightnessAction)
> popup:addActionListener("go_home", self,
> cancelBrightnessAction)
> popup:addActionListener("scanner_rew", self,
> cancelBrightnessAction)
>
> Thanks
The sleep button is mapped to Escape that should get you out.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio
'Squeezebox client builds'
(https://sourceforge.net/projects/lmsclients/files/) 'donations'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted)
always appreciated.
ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484
View this thread: http://forums.slimdevices.com/showthread.php?t=114429
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
