Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
You can create a card config file. Look in /usr/local/share/pcp/cards After you make The file, you need to add the file to be backed up. Add usr/local/share/pcp/cards/xx.conf To the file /opt/.filetool.lst piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
paul- wrote: > The -517 errors are normal .its just a timing thing. The kernel only > prints the errors, not the last success. Also, upgrade To the latEst > kernel, dont use the next branch. Thanks I will not upgrade the kernel any further unless I need to. I would like to setup my Oled ssd 1306 with LMSMonitor however it sems that the easiest way is via pCP. I tried googleling (a lot) and as you mentioned people are not using pCP with audio injector stereo or orcto. Maybee because our card has inputsound You mentioned last year to one that he could try to add the driver to config.txt as an overlay I tried the following: #dtparam=audio=on, audio_pwm_mode=2, dtoverlay=audioinjector-wm8731-audio. Is there anyway I can add the card to the list in Squezzelight settings and change the alsa mixer settings I enclose pictures from my alsamixer and the setup page Peter3572035721 +---+ |Filename: Skærmbillede 2021-09-11 kl. 11.24.03.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35721| +---+ cassio299's Profile: http://forums.slimdevices.com/member.php?userid=65363 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
bpa wrote: > Are still using dmix ? This is a mixer and so another source (e.g. > system sounds) can be merged and possibly affecting the audio . > > Try with plughw. Hi I changed to plughw to avoid me from accidentally activating some sound in Raspian... thanks cassio299's Profile: http://forums.slimdevices.com/member.php?userid=65363 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
*@mr-b * The outputs listed seem to indicate that the dac hat is not being recognised. To confirm it is working, I suggest you use the HiFIberry OS. Or Edit pCP The overlay required, according to the data sheet is Configuration Overlay for config.txt: dtoverlay=hifiberry-dacplus ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Hi I'm having trouble getting my new Rpi4 with a Hifiberry DAC2 Pro XLR to work. No audio comes out of the XLR or even minijack outputs. I searched and found a few posts back about some settings for this HAT but was rather confused by them as I've not seen an Extra HATS setting. Also I found this https://forums.slimdevices.com/showthread.php?114030-piCorePlayer-7-0-0-doesn-t-play-well-with-HiFiBerry-DAC2-Pro which semed very similar. I found like the OP too that the HAT LED came on when the DAC+ output was used! But then if I selected DAC2HD (and Pro) Squeezelite didn't run. The Alsa mixer button gives Save and 0dB buttons, which didn't make much sense to me. Also I thought that the DAC+, DAC2 and DAC2 HD HATs all used different chips so why are there only two outputs? Or is it just that my card is faulty? mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
The -517 errors are normal .its just a timing thing. The kernel only prints the errors, not the last success. Also, upgrade To the latEst kernel, dont use the next branch. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
cassio299 wrote: > However the sound became flat so I will only use this in an emergency. Are still using dmix ? This is a mixer and so another source (e.g. system sounds) can be merged and possibly affecting the audio . Try with plughw. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
bpa wrote: > I think these lines may be the issue in dmesg > > Code: > > > . > . > [ 10.001058] wm8731 1-001a: supply DBVDD not found, using dummy regulator > [ 10.002405] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) > [ 10.003540] [ cut here ] > [ 10.003636] WARNING: CPU: 0 PID: 32 at sound/core/init.c:208 > snd_card_new+0x43c/0x474 [snd] > [ 10.003645] Modules linked in: snd_soc_wm8731(+) regmap_spi spidev(+) > regmap_i2c snd_soc_audioinjector_pi_soundcard brcmfmac brcmutil > sha256_generic cfg80211 rfkill raspberrypi_hwmon snd_soc_bcm2835_i2s > spi_bcm2835 snd_soc_core snd_compress snd_pcm_dmaengine i2c_bcm2835 > . > . > > > Hi bpa Thank you for leading me to this error, After I got my card working I took a new dmesg read and boy its full off errors: 7.138025] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.142970] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.147638] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.527869] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.537010] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.539097] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.808646] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.808829] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.884673] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [8.532307] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [8.536466] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [ 11.070282] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 11.900378] process '/usr/bin/squeezelite-armv6hf' started with executable stack [ 12.390687] bcm2835-i2s 3f203000.i2s: I2S SYNC error! So I started to google for this -517 error and ended up at audio injectors forum were others back in 2019 had came to the conclusion of an kernel error with the current driver from audio injector... well my card is working so im not so keen in doing all to much but here is what I did: in /boot/config.txt I unmarked the on for i2s,i2c and spi I den upgraded to latest firmware and kernel for the RPi 3a sudo BRANCH=next rpi-update my new dmesg is now only have this errors: [7.191372] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.432707] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.461112] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.463819] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.507412] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 [8.349142] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [8.350999] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [ 11.497874] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 12.223105] process '/usr/bin/squeezelite-armv6hf' started with executable stack [ 12.702312] bcm2835-i2s 3f203000.i2s: I2S SYNC error! Back in 2019 the audio injector onto card working a work around was to add another driver to /etc/modules. snd_soc_cs42xx8_i2c after this the dmsg errors came down to this: [7.204357] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.472658] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.499580] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.502034] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [7.811501] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [7.836111] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 11.096476] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled 12.213389] bcm2835-i2s 3f203000.i2s: I2S SYNC error! However the sound became flat so I will only use this in an emergency. I enclose the fully dmsg If you or anybody else has suggestions to fix those errors I will be happy to hear from you Peter +---+ |Filename: dmseg 2.pdf | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35718| +---+ cassio299's Profile:
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
cassio299 wrote: > Thank you Ronnie I got it to work. > > For future reference here is how I got it to work on Raspian desktop > with Squeezelite > > Burn The Raspbian desktop to your SD Card and set it up to work > > In terminal type: > > sudo apt purge pulseaudio > > sudo nano /boot/config.txt > > edit: > > remove the # from: dtparam=i2c_arm=on > dtparam=i2s=on > dtparam=spi=on > > set dtparam=audio=on to #dtparam=audio=onand add in a new line > below: > dtoverlay=audioinjector-wm8731-audio > > leave the rest as is... > > save and leave config > > type in terminal: > alsamixer > > in alsamixer hit F6 and choose your soundcard move the cursor to: Master > Playback ZC > > Playback Deemphasis > > ADC High Pass Filter > > Output Mixer HiFi > > Output Mixer Line > > Output Mixer Mic > > Store DC Offset > If the box > above the settings says [MM] hit the [M] button to unmute it. The box > will now say [00] instead (Thankyou JGCOBRA from the audio injector > forums) > > hit [ESC] > > Follow this guide to installing and setting up Squeezelite: > > http://www.gerrelt.nl/RaspberryPi/wordpress/tutorial-installing-squeezelite-player-on-raspbian/ > > In the script squeezelite_settings.sh I added: > > SL_SOUNDCARD="dmix:CARD=audioinjectorpi,DEV=0" > SL_ALSA_PARAMS="80:::0" > > Peter Hey Peter Good Work :):) What a faff !!:rolleyes::rolleyes: And thanks for the info, there are a couple of nuggets there, that will, maybe , help others (I'm likely to forget them :(:o) ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
Man in a van wrote: > @CASSIO299 > > > My suggestion to use the > > https://www.raspberrypi.org/software/operating-systems/ > > 35716 > > is based on the fact that it does not include PulseAudio (which, I > think, requires xserver) > > Access is by SSH; as I have said, I am willing to help if you wish it. > > I don't have a rpi3A+ but do have a rpi3B+, so can knock up an image > for you, without any problem. > > ronnie Thank you Ronnie I got it to work. For future reference here is how I got it to work on Raspian desktop with Squeezelite Burn The Raspbian desktop to your SD Card and set it up to work In terminal type: sudo apt purge pulseaudio sudo nano /boot/config.txt edit: remove the # from: dtparam=i2c_arm=on dtparam=i2s=on dtparam=spi=on set dtparam=audio=on to #dtparam=audio=onand add in a new line below: dtoverlay=audioinjector-wm8731-audio leave the rest as is... save and leave config type in terminal: alsamixer in alsamixer hit F6 and choose your soundcard move the cursor to: Master Playback ZC Playback Deemphasis ADC High Pass Filter Output Mixer HiFi Output Mixer Line Output Mixer Mic Store DC Offset If the box above the settings says [MM] hit the [M] button to unmute it. The box will now say [00] instead (Thankyou JGCOBRA from the audio injector forums) hit [ESC] Follow this guide to installing and setting up Squeezelite: http://www.gerrelt.nl/RaspberryPi/wordpress/tutorial-installing-squeezelite-player-on-raspbian/ In the script squeezelite_settings.sh I added: SL_SOUNDCARD="dmix:CARD=audioinjectorpi,DEV=0" SL_ALSA_PARAMS="80:::0" Peter cassio299's Profile: http://forums.slimdevices.com/member.php?userid=65363 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
cassio299 wrote: > I can't see any problems in the dmesg file maybe because I don't know > what to look fore. I think these lines may be the issue in dmesg Code: . . [ 10.001058] wm8731 1-001a: supply DBVDD not found, using dummy regulator [ 10.002405] audioinjector-stereo soc:sound: snd_soc_register_card failed (-517) [ 10.003540] [ cut here ] [ 10.003636] WARNING: CPU: 0 PID: 32 at sound/core/init.c:208 snd_card_new+0x43c/0x474 [snd] [ 10.003645] Modules linked in: snd_soc_wm8731(+) regmap_spi spidev(+) regmap_i2c snd_soc_audioinjector_pi_soundcard brcmfmac brcmutil sha256_generic cfg80211 rfkill raspberrypi_hwmon snd_soc_bcm2835_i2s spi_bcm2835 snd_soc_core snd_compress snd_pcm_dmaengine i2c_bcm2835 . . bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer: soundcard Audioinjector stereo not working RPi 3a
@CASSIO299 My suggestion to use the https://www.raspberrypi.org/software/operating-systems/ 35716 is based on the fact that it does not include PulseAudio (which, I think, requires xserver) Access is by SSH; as I have said, I am willing to help if you wish it. I don't have a rpi3A+ but do have a rpi3B+, so can knock up an image for you, without any problem. ronnie +---+ |Filename: Raspberry pi OS lite.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35716| +---+ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=115118 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
