Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Thank you all for the replies - they gave me the confidence to go for it, but not before backing up the whole card, of course. ;) I performed an 8.0.0 > 8.1.0 Insitu update on my 3 partition setup and am happy to report that it worked without a hitch. It appears that all my pCP settings survived, as did the partition scheme, as did the LMS data on partition 3. The screenshot below showing the partitions is from after the update to 8.1.0, and you can see that Labels, LBA Start, LBA End, Size are identical to before the update (see my previous post). Thanks as always for this stellar piece of software! Best regards, jasc 36402 +---+ |Filename: Screenshot 2021-12-10 212755.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=36402| +---+ audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 8.0.0 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.2.1' (http://downloads.slimdevices.com/nightly/index.php?ver=8.2) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
I am running pCP 8.0.0 and am considering an Insitu update to 8.1.0. My setup has 3 partitions - Boot, Root, Data (for LMS data), see below The Insitu update warning reads: - Assume an insitu update will overwrite ALL the data on your SD card. - Any user modified or added files may be lost or overwritten. Q: Will the Insitu update just overwrite the Boot, Root partitions and leave the Data partition intact? Or will it literally overwrite the whole card and revert back to the standard Boot, Root partition scheme? 36389 Many thanks, jasc +---+ |Filename: pcp-partitions.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=36389| +---+ audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 8.0.0 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.2.1' (http://downloads.slimdevices.com/nightly/index.php?ver=8.2) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: LMS Monitor 2020
cortegedusage wrote: > @shunte88 Thank you for the hint of using slimmer, I didn't find it my > self. I will try it. > > Thank you, > > Dennis Hello, did you ever manage to get Slimmer to work on your 16x2 Display? Best, jasc audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 7.0.1 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.1.2' (http://downloads.slimdevices.com/nightly/index.php?ver=8.1) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111790 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Man in a van wrote: > Just install google translate on the chrome browser :) > I would think that you might be better off with raspberry pi OS Lite, > and adapt these install instructions > Moode audio > http://moodeaudio.org/forum/showthread.php?tid=147 > and another one > http://http://moodeaudio.org/forum/showthread.php?tid=550 > This thread has links > http://forum.audiophonics.fr/viewtopic.php?f=5=1765#p7070 > Or maybe even Max2Play > There are details for the power button on the old raspbian, which should > still work > https://github.com/audiophonics/Raspberry-pwr-management > good luck > ronnie Thank you again, Ronnie. I will give it a go, as per the above, but will have to find the time. For the record, I got a response from Audiophonics themselves, who had this to say, referring to insufficient / irregular Python support in pCP: > Hello, > > No, it's really hard to manage display with Picore player as Python is > not properly supported. > > Only LMS solution available with display will be the Dietpi image. > > Cordialement. The Diet Pi image can be found 'here' (https://www.audiophonics.fr/en/blog-diy-audio/23-start-up-evo-raspdac-rasptouch-raspdac-mini-with-a-pre-configured-image.html). Best regards, jasc audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 7.0.1 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.1.2' (http://downloads.slimdevices.com/nightly/index.php?ver=8.1) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Man in a van wrote: > I just popped pCP v7.0.0 on a rpi 3b > > it seems to be working OK (I can't listen to any output at the moment, > but the blue led is on and the switch works :)) > > Can't help with the screen, you should be able to find the settings on > the Audiophonics' forum (you will have to search quite a bit :() > > ronnie Thank you sir, this is a great starting point! And yes, the Audiophonics forum is a search in the wild weeds, and if you like me do not speak French, it is wild weeds plus thickets. :) Much appreciated, thanks again. jasc audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 7.0.1 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.1.2' (http://downloads.slimdevices.com/nightly/index.php?ver=8.1) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
Hello out there, Does anyone have the original 2016 Audiophonics RaspDAC with - Sabre V3 ES9023 - Power Button - Winstar OLED 16x2 Display fully working with pCP 7.0.0, Power Button and Display functionality? If yes, any help to get it up and running (particularly Power Button and Display) would be greatly appreciated. I am hoping for the Jackpot in form of a downloadable image, but realize that is far fetched... so, happy to dive in with any pointers on required packages, scripts, etc. Thanks and best, jasc 33810 +---+ |Filename: audiophonics-raspdac-i-sabre-v3-streamer-raspberry-pi-dac-tcxo.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33810| +---+ audio chain: 'raspberry pi 4b 8gb' (https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) > 'picoreplayer 7.0.1 64-bit' (https://picoreplayer.org/) > 'logitech media server 8.1.2' (http://downloads.slimdevices.com/nightly/index.php?ver=8.1) > 'upnp/dlna bridge' (https://forums.slimdevices.com/showthread.php?103728-announce-upnpbridge-integrate-upnp-dlna-players-with-lms-(squeeze2upnp)) > 'linn majik dsm/2' (https://docs.linn.co.uk/wiki/index.php/majik_dsm_/2_(2015_variant)) > 'linn majik exaktbox-i' (https://docs.linn.co.uk/wiki/index.php/majik_exaktbox-i) > 'linn majik 140 aktiv' (https://www.linn.co.uk/music-systems/majik/140) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 7.0.0
ralphy wrote: > > > I don't use shairport-sync these days, so I'm inclined to just remove it > from the next pcp release, unless Mike B decides to fix the included > tinymdns support. Please n :) jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Hi, On pCP Main Page > pCP Updates > Patch Update -Patch pCP current version extensions This will check for updated pcp extensions and update if needed. pCP Version will remain unchanged- Is there a place one can look to see if patches are available, and if so what they fix, add or update? (i.e. a changelog to view without actually invoking the function) My pCP info: - piCorePlayer v6.1.0 - www v0009 - linux 4.19.122-pcpCore_v8 - piCore v10.3pCP - Squeezelite v1.9.6-1206-pCP Thanks and best, jasc jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Paul Webster wrote: > You should not connect a 6v supply to the RPi - at least not directly. > Perhaps that power supply was intended to connect to the DAC which then > had circuitry to protect step-down the voltage before providing it > onwards to the RPi. Thanks for the clarification Paul, you are right: Upon re-examination, this power supply connected directly to the iSabre DAC which in turn then passed on power to the RPi. For the record, I am currently using an iFi iPower 5V PSU with the RPi 4 and will then stick with that. I admit I'm somewhat susceptible to the "audiophile" snake-oil as regards wall-wart power supply noise and its purported effects on sound quality - which surely exist - but everyone's mileage may vary depending upon their particular situation... jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
In 2017, I bought the following power supply for an RPi 3 + iSabre DAC audio project - can anyone tell me if it can be used with the RPi 4 / 8GB without bricking it? (of course with the required USB C adapter): AUDIOPHONICS Linear Regulated Power Supply EMI RFI Filter 6V 3.5A 25VA Specifically, I am uncertain if the *6V 3.5A 25VA* will do any damage to the RPi 4. Thanks and best, jasc jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Slightly off topic - I've found Paypal donation links for pCP (done, thanks for the great work), Michael Herger (done, thanks for the great work) but not for philippe44ca - is there one? jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
This is the setting I now have to achieve the behavior you are describing: LMS does not automatically check for updates on its own, only when manually triggered by the "Check for updates now" CTA - and if it finds a newer build, will automatically download it, thereby enabling pCP's admin console update function. It seems worth it to mention in the "more >" tooltip that auto downloads must be enabled in LMS itself for this function to work. Going forward, I will check here for any available updates http://downloads.slimdevices.com/nightly/index.php?ver=8.0,read the Git Commit Log to see if there is something in it for me, and if so, update via the above process. On a related note, can anyone say if the update packages logitechmediaserver-8.0.0--noCPAN.tgz accumulate over time, if yes in what directory, or are they removed after installation? Thanks and best, jasc 31156 mr-b wrote: > Hmm, I don't recall changing any LMS download settings when PCP > installed LMS, all I know is that clicking the Nightly Update button on > PCP doesn't seem to do anything unless you have already set the > auto-download LMS updates option in LMS, which I def would not have done > since I only download s/w updates when they're required for a specific > reason via the changelog. Call me old fashioned but I prefer to do s/w > testing when I'm prepared for it! ;-) > > The same goes for Update Libs. ;-) +---+ |Filename: settings.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=31156| +---+ jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Thank you for the reply, crossed posts, solved it just 2 minutes prior! :) Best, jasc kidstypike wrote: > LMS > Settings > Advanced tab > Software Updates > Automatically > download updates when they're available > Check for updates now > should > download the most recent LMS version. > > Then in pCP > LMS page > Nightly update button should let you install > the downloaded update. > > 31150 jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Disregard, solved by setting LMS to automatically download updates when available, then triggering the update via the pCP LMS Update function. Best, jasc jasc wrote: > Hello, > > I am trying to update my LMS 8.0.0 Nightly via the (Beta) LMS tab > > "Nightly Update" button, and receive the following message despite an > update being available since today: > > -No Update Found > No Update file was found, Please check LMS Server configuration.- > > LMS Settings: > Advanced > Software Updates > Don't check for software updates > Do not automatically download updates > > Location of LMS Cache and Prefs is > /dev/mmcblk0p3 > /mnt/lms_cache/slimserver > > Installed: > Logitech Media Server Version: 8.0.0 - 1594451286 (July 11 > 2020) > > Available: > logitechmediaserver-8.0.0-1595835082-noCPAN.tgz (July 27 > 2020) > > Manually checking within LMS itself successfully reports the new Nightly > build. > > I have intentionally deactivated the update settings in LMS to have > manual control over the process, ideally via the pCP interface. > > Am I missing something? > > Many thanks, > jasc jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Hello, I am trying to update my LMS 8.0.0 Nightly via the LMS tab > "Nightly Update" button, and receive the following message despite an update being available since today: -No Update Found No Update file was found, Please check LMS Server configuration.- LMS Settings: Advanced > Software Updates Don't check for software updates Do not automatically download updates Installed: Logitech Media Server Version: 8.0.0 - 1594451286 (July 11 2020) Available: logitechmediaserver-8.0.0-1595835082-noCPAN.tgz (July 27 2020) Manually checking within LMS itself successfully reports the new Nightly build. I have intentionally deactivated the update settings in LMS to have manual control over the process, ideally via the pCP interface. Am I missing something? Many thanks, jasc jasc's Profile: http://forums.slimdevices.com/member.php?userid=69223 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
