Re: 【活动】北京线下交流活动
平时貌似没空呀 2013/7/1 tanthalas tanthalas...@hotmail.com Hi,各位好~ 社区计划在北京组织新的小型线下聚会活动,欢迎各位新老朋友参与。 小型线下聚会活动交流主题随意,可以交流CloudStack或任何技术,结交朋友,也可以表达个人想法,八卦云计算,虽然没有确定主题,但希望参与的朋友们在讨论中相互促进,有所收获。 活动每月举办2次,每月1日发布当月活动的时间和地点。优先选择周四晚上在咖啡馆聚会,也可能是饭馆。参与者费用AA。具体信息会在社区网站的活动公布页面和apache邮件组中公布,请密切关注动态。 组织人:李学辉@lee-xh (社区创始人),刘宇超@tanthalas (社区负责人之一),如有任何想法,可私信联系我们。 2013年7月小聚会活动预告: 7月11日 18:30~21:30 地点:中关村的车库咖啡 7月25日 18:30~21:30 地点:待定(计划在国贸附近) 2013-07-01 刘宇超 Richard Liu
回复: 【活动】北京线下交流活动
您好: 这样的活动,很好呀,一定会参加的。 cloudstackfqa2013 发件人: tanthalas 发送时间: 2013-07-01 17:50 收件人: users-cn 主题: 【活动】北京线下交流活动 Hi,各位好~ 社区计划在北京组织新的小型线下聚会活动,欢迎各位新老朋友参与。 小型线下聚会活动交流主题随意,可以交流CloudStack或任何技术,结交朋友,也可以表达个人想法,八卦云计算,虽然没有确定主题,但希望参与的朋友们在讨论中相互促进,有所收获。 活动每月举办2次,每月1日发布当月活动的时间和地点。优先选择周四晚上在咖啡馆聚会,也可能是饭馆。参与者费用AA。具体信息会在社区网站的活动公布页面和apache邮件组中公布,请密切关注动态。 组织人:李学辉@lee-xh (社区创始人),刘宇超@tanthalas (社区负责人之一),如有任何想法,可私信联系我们。 2013年7月小聚会活动预告: 7月11日 18:30~21:30 地点:中关村的车库咖啡 7月25日 18:30~21:30 地点:待定(计划在国贸附近) 2013-07-01 刘宇超 Richard Liu
Re: cloud-agne t报错? heartbeat_faile d
主机不能重新mount主存储,要看一下存储那边出了什么事情,是否能正常mount等等。 2013-07-03 刘宇超 Richard Liu 发件人: 王耀锋 发送时间: 2013-07-02 10:59:39 收件人: users-cn@cloudstack.apache.org 抄送: 主题: cloud-agne t报错? heartbeat_faile d 2013-07-02 10:56:19,010 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b, retry: 02013-07-02 10:56:19,074 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b, retry: 12013-07-02 10:56:19,138 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b, retry: 22013-07-02 10:56:19,178 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b, retry: 32013-07-02 10:56:19,246 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b, retry: 42013-07-02 10:56:19,246 WARN [kvm.resource.KVMHAMonitor] (Thread-13:null) write heartbeat failed: Failed to remount 192.168.2.2:/database/export/cloudprimary-17 under /mnt/700fe784-7fb8-398e-8ee2-9954d1c6c23b; reboot the host 当我重启了cloud management 后,各个cloud-agent就报这个错误, 然后我去reboot这些host, 同样报这样错误?这个这么解决?
Re: Resize Primary Storage
The output of the above command is blank. On Tue, Jul 2, 2013 at 11:54 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do #Xe sr-list params=all name-description=200 On one of the Xenserver connected to this storage pool? -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 8:02 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No. Its not updated. Please find the details as below, mysql select * from op_host_capacity where host_id = '200'; ++-++++---+---++---++-+-+ | id | host_id | data_center_id | pod_id | cluster_id | used_capacity | reserved_capacity | total_capacity | capacity_type | capacity_state | update_time | created | ++-++++---+---++---++-+-+ | 3 | 200 | 1 | 1 | 1 | 184863948800 | 0 | 536858329088 | 3 | Enabled| 2013-07-01 20:55:02 | 2013-06-27 15:24:22 | ++-++++---+---++---++-+-+ 1 row in set (0.00 sec) mysql select * from storage_pool where id = '200'; +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ | id | name| uuid| pool_type | port | data_center_id | pod_id | cluster_id | available_bytes | capacity_bytes | host_address | user_info | path | created | removed | update_time | status | storage_provider_id | scope | +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ | 200 | vol_500g_hp | vol_500g_hp | PreSetup |0 | 1 | 1 | 1 |346688585728 | 536858329088 | localhost| NULL | /vol_500g_hp | 2013-06-27 15:24:22 | NULL| NULL| Up | NULL | NULL | +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ 1 row in set (0.00 sec) It should be 1TB approx. On Tue, Jul 2, 2013 at 1:18 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: AFAIK the capacity checker thread will update the op_host_capacity. Can you quickly check if the op_host_capacity is updated for the storage pool with the current size? Select * from op_host_capacity where host_id=#; The new size may not reflected in storage_pool table, can you also do Select * from storage_pool where id=#; -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 12:07 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No luck. Btw, I'm using Apache CloudStack 4.1 and XenServer 6.1. On Mon, Jul 1, 2013 at 8:48 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Try to unmanage the cluster from CloudStack UI and Manage it back. -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Monday, July 01, 2013 2:53 PM To: users@cloudstack.apache.org Subject: Reg: Resize Primary Storage Greetings ! We are using a Primary storage of 1TB from iSCSI SAN. We increased the size of the assigned LUN to 2TB which is getting reflected at the hypervisros after a refresh by iscsiadm. What is the way in which we can refresh the metadata of CloudStack ? Couple of folks on the forums suggest to modify the entries in storage_pool and op_host_Capacity tables. Is this the only availble way ? Thanks. -- Iliyas -- - Md. Iliyas Shirol Mobile : +91 9902 977 800 Google : iliyas.shirol@ gmail.com -- - Md. Iliyas Shirol Mobile : +91 9902 977 800 Google : iliyas.shirol@ gmail.com
RE: Resize Primary Storage
Can you do xe sr-list params=all The above command will give the list of all the SR's and their physical size. We need to confirm if the correct size is reported on xenserver. Note: I don't have a 4.1 setup but I have tested your scenario on 3.0.x setup and it works without any issues ( the storage size was updated once I unmanaged and managed the Cluster from UI). -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 1:01 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage The output of the above command is blank. On Tue, Jul 2, 2013 at 11:54 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do #Xe sr-list params=all name-description=200 On one of the Xenserver connected to this storage pool? -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 8:02 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No. Its not updated. Please find the details as below, mysql select * from op_host_capacity where host_id = '200'; ++-++++---+---++---++-+-+ | id | host_id | data_center_id | pod_id | cluster_id | used_capacity | | reserved_capacity | total_capacity | capacity_type | capacity_state | update_time | created | ++-++++---+---++---++-+-+ | 3 | 200 | 1 | 1 | 1 | 184863948800 | 0 | 536858329088 | 3 | Enabled| 2013-07-01 20:55:02 | 2013-06-27 15:24:22 | ++-++++---+---++---++-+-+ 1 row in set (0.00 sec) mysql select * from storage_pool where id = '200'; +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ | id | name| uuid| pool_type | port | data_center_id | pod_id | cluster_id | available_bytes | capacity_bytes | host_address | user_info | path | created | removed | update_time | status | storage_provider_id | scope | +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ | 200 | vol_500g_hp | vol_500g_hp | PreSetup |0 | 1 | 1 | 1 |346688585728 | 536858329088 | localhost| NULL | /vol_500g_hp | 2013-06-27 15:24:22 | NULL| NULL| Up | NULL | NULL | +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ 1 row in set (0.00 sec) It should be 1TB approx. On Tue, Jul 2, 2013 at 1:18 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: AFAIK the capacity checker thread will update the op_host_capacity. Can you quickly check if the op_host_capacity is updated for the storage pool with the current size? Select * from op_host_capacity where host_id=#; The new size may not reflected in storage_pool table, can you also do Select * from storage_pool where id=#; -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 12:07 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No luck. Btw, I'm using Apache CloudStack 4.1 and XenServer 6.1. On Mon, Jul 1, 2013 at 8:48 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Try to unmanage the cluster from CloudStack UI and Manage it back. -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Monday, July 01, 2013 2:53 PM To: users@cloudstack.apache.org Subject: Reg: Resize Primary Storage Greetings ! We are using a Primary storage of 1TB from iSCSI SAN. We increased the size of the assigned LUN to 2TB which is getting reflected at the hypervisros after a refresh by iscsiadm. What is the way in which we can refresh the metadata of CloudStack ? Couple of folks on the forums suggest to
Re: Resize Primary Storage
Prashanth, Yes, the 1TB size is not getting reflected in the SR. I found the following post for refreshing SR, http://support.citrix.com/article/CTX126473 Do I need to perform these steps manually ? uuid ( RO): abc888bf-a261-d78f-d820-9c388a6934b8 name-label ( RW): vol_500g_hp name-description ( RW): host ( RO): XXX.XXX.XXX.XXX allowed-operations (SRO): VDI.create; VDI.snapshot; PBD.create; PBD.destroy; plug; update; VDI.destroy; scan; VDI.clone; VDI.resize; unplug current-operations (SRO): VDIs (SRO): 26b1aba3-a53c-4da1-86dd-0cb319f02b08; 149112c8-a5c1-43c0-a038-0c47028293e1; 7827016c-3ac7-49f4-83c7-a783eb1b3f70; e9ce9bc9-1e94-48d5-8e14-80a56a022c8b; 85e1f61f-9916-4616-b86b-ea5a1f7fe2e9; f6bab935-52d3-4bcc-b446-fe958fe071fb; 5281f16c-e7f6-41bd-8335-f290c86352dd; 064ba38d-4749-479a-80c0-0d5bd24d77a0; d77e22e8-924a-4c80-a87b-f4a859e686af; 102ad294-ac8c-4fc1-b074-a53abb7446de; 0cc149e6-0083-4348-bc43-8a40ea124457; 90062cbb-c0fa-4bf0-8978-bbc359439d06; 1b34aa2e-6936-4742-861a-877bea90b9f3; cd9ffb17-edac-4657-95b2-fcd44a8fbd44; caccf8df-fc94-4e9e-ab21-2cb6f111a9d5; 9428a799-276d-496b-8e93-f0cca015d89c; 66a9317f-e682-43b3-a79c-2531f5c397d4; fc92cc3f-9012-4daf-8e63-c3b85993d9df; a7ffeaff-41eb-454b-8584-937615316e59; 8f3e7868-7899-4d8a-8592-ec618e19caa8; 158a2026-1873-45f8-b258-a3af9d41b790; 815bd6b8-d647-4cf8-a4c0-25c6fa86cdad; a5145c77-b0fa-498c-bb54-7f449aeb17cd PBDs (SRO): 1fa1a5c9-94eb-4b96-93e0-7387cf72dea2 virtual-allocation ( RO): 295492911104 physical-utilisation ( RO): 298881908736 physical-size ( RO): 536858329088 type ( RO): lvmoiscsi content-type ( RO): shared ( RW): false introduced-by ( RO): not in database other-config (MRW): sm-config (MRO): allocation: thick; use_vhd: true; multipathable: true; devserial: scsi-36000d3100023c80a blobs ( RO): local-cache-enabled ( RO): false tags (SRW): On Tue, Jul 2, 2013 at 2:13 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do xe sr-list params=all The above command will give the list of all the SR's and their physical size. We need to confirm if the correct size is reported on xenserver. Note: I don't have a 4.1 setup but I have tested your scenario on 3.0.x setup and it works without any issues ( the storage size was updated once I unmanaged and managed the Cluster from UI). -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 1:01 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage The output of the above command is blank. On Tue, Jul 2, 2013 at 11:54 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do #Xe sr-list params=all name-description=200 On one of the Xenserver connected to this storage pool? -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 8:02 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No. Its not updated. Please find the details as below, mysql select * from op_host_capacity where host_id = '200'; ++-++++---+---++---++-+-+ | id | host_id | data_center_id | pod_id | cluster_id | used_capacity | | reserved_capacity | total_capacity | capacity_type | capacity_state | update_time | created | ++-++++---+---++---++-+-+ | 3 | 200 | 1 | 1 | 1 | 184863948800 | 0 | 536858329088 | 3 | Enabled| 2013-07-01 20:55:02 | 2013-06-27 15:24:22 | ++-++++---+---++---++-+-+ 1 row in set (0.00 sec) mysql select * from storage_pool where id = '200'; +-+-+-+---+--++++-++--+---+--+-+-+-++-+---+ | id | name| uuid| pool_type | port | data_center_id | pod_id | cluster_id | available_bytes | capacity_bytes | host_address | user_info | path | created | removed | update_time | status | storage_provider_id | scope |
Cloudmonkey create network problem
Hi. i try create the shared network with cloudmonkey with command: create network name=Shared-Network displaytext=Shared-Network networkofferingid=f03374d2-a8dc-40ab-8839-94dc31238410 physicalnetworkid=246635bf-1cda-4e1b-bc8f-b4ddb242e81c gateway=10.1.1.1 netmask=225.225.225.0 networkdomain=* startip=10.1.1.2 endip10.1.1.124 zoneid=13fde89f-5eea-4e94-a38b-ede647126022 but always have error HTTP Error 431: if remove the network domain option: HTTP Error 401: Unauthorized Can someone deal with it ? Thanks
Re: Cloudmonkey create network problem
Not currently in front of my computer to check but I suspect that as its a Shared Network you are trying to create you need to specify the domain unless you are trying to share at Zone Level. You are also specifying an IP Range but no VLAN ID, theses settings are always required together. Check and confirm the offering you are referencing is for a shared network, and has the Specify VLAN flag set, as this also enables (enforces) the allocation of a guest IP range rather than just the CIDR. Also what account are you running this under, shared networks can only be created by Root Admins. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540| M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com |www.shapeblue.com | Twitter:@shapebluehttps://twitter.com/#!/shapeblue ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS On 2 Jul 2013, at 10:04, Anton Rubets plejik@gmail.commailto:plejik@gmail.com wrote: Hi. i try create the shared network with cloudmonkey with command: create network name=Shared-Network displaytext=Shared-Network networkofferingid=f03374d2-a8dc-40ab-8839-94dc31238410 physicalnetworkid=246635bf-1cda-4e1b-bc8f-b4ddb242e81c gateway=10.1.1.1 netmask=225.225.225.0 networkdomain=* startip=10.1.1.2 endip10.1.1.124 zoneid=13fde89f-5eea-4e94-a38b-ede647126022 but always have error HTTP Error 431: if remove the network domain option: HTTP Error 401: Unauthorized Can someone deal with it ? Thanks This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: Resize Primary Storage
Thanks Prashanth. It works ! Btw, unmanaging the cluster has any impact ? On Tue, Jul 2, 2013 at 2:34 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Do I need to perform these steps manually ? Yes. Once done , confirm if the size is reported correctly on xenserver. Then Unmanage and Manage the cluster from UI. Thanks, Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 2:24 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage Prashanth, Yes, the 1TB size is not getting reflected in the SR. I found the following post for refreshing SR, http://support.citrix.com/article/CTX126473 Do I need to perform these steps manually ? uuid ( RO): abc888bf-a261-d78f-d820-9c388a6934b8 name-label ( RW): vol_500g_hp name-description ( RW): host ( RO): XXX.XXX.XXX.XXX allowed-operations (SRO): VDI.create; VDI.snapshot; PBD.create; PBD.destroy; plug; update; VDI.destroy; scan; VDI.clone; VDI.resize; unplug current-operations (SRO): VDIs (SRO): 26b1aba3-a53c-4da1-86dd-0cb319f02b08; 149112c8-a5c1-43c0-a038-0c47028293e1; 7827016c-3ac7-49f4-83c7-a783eb1b3f70; e9ce9bc9-1e94-48d5-8e14-80a56a022c8b; 85e1f61f-9916-4616-b86b-ea5a1f7fe2e9; f6bab935-52d3-4bcc-b446-fe958fe071fb; 5281f16c-e7f6-41bd-8335-f290c86352dd; 064ba38d-4749-479a-80c0-0d5bd24d77a0; d77e22e8-924a-4c80-a87b-f4a859e686af; 102ad294-ac8c-4fc1-b074-a53abb7446de; 0cc149e6-0083-4348-bc43-8a40ea124457; 90062cbb-c0fa-4bf0-8978-bbc359439d06; 1b34aa2e-6936-4742-861a-877bea90b9f3; cd9ffb17-edac-4657-95b2-fcd44a8fbd44; caccf8df-fc94-4e9e-ab21-2cb6f111a9d5; 9428a799-276d-496b-8e93-f0cca015d89c; 66a9317f-e682-43b3-a79c-2531f5c397d4; fc92cc3f-9012-4daf-8e63-c3b85993d9df; a7ffeaff-41eb-454b-8584-937615316e59; 8f3e7868-7899-4d8a-8592-ec618e19caa8; 158a2026-1873-45f8-b258-a3af9d41b790; 815bd6b8-d647-4cf8-a4c0-25c6fa86cdad; a5145c77-b0fa-498c-bb54-7f449aeb17cd PBDs (SRO): 1fa1a5c9-94eb-4b96-93e0-7387cf72dea2 virtual-allocation ( RO): 295492911104 physical-utilisation ( RO): 298881908736 physical-size ( RO): 536858329088 type ( RO): lvmoiscsi content-type ( RO): shared ( RW): false introduced-by ( RO): not in database other-config (MRW): sm-config (MRO): allocation: thick; use_vhd: true; multipathable: true; devserial: scsi-36000d3100023c80a blobs ( RO): local-cache-enabled ( RO): false tags (SRW): On Tue, Jul 2, 2013 at 2:13 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do xe sr-list params=all The above command will give the list of all the SR's and their physical size. We need to confirm if the correct size is reported on xenserver. Note: I don't have a 4.1 setup but I have tested your scenario on 3.0.x setup and it works without any issues ( the storage size was updated once I unmanaged and managed the Cluster from UI). -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 1:01 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage The output of the above command is blank. On Tue, Jul 2, 2013 at 11:54 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do #Xe sr-list params=all name-description=200 On one of the Xenserver connected to this storage pool? -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 8:02 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No. Its not updated. Please find the details as below, mysql select * from op_host_capacity where host_id = '200'; ++-++++---+---++---++-+-+ | id | host_id | data_center_id | pod_id | cluster_id | | used_capacity | | reserved_capacity | total_capacity | capacity_type | capacity_state | update_time | created | ++-++++---+---++---++-+-+ | 3 | 200 | 1 | 1 | 1 | 184863948800 | 0 | 536858329088 | 3 | Enabled| 2013-07-01 20:55:02 | 2013-06-27 15:24:22 |
RE: Resize Primary Storage
No. The VM's will still be running. Unmanging the cluster will only remove the cluster and it's entities from Cloudstack's control. -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 3:13 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage Thanks Prashanth. It works ! Btw, unmanaging the cluster has any impact ? On Tue, Jul 2, 2013 at 2:34 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Do I need to perform these steps manually ? Yes. Once done , confirm if the size is reported correctly on xenserver. Then Unmanage and Manage the cluster from UI. Thanks, Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 2:24 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage Prashanth, Yes, the 1TB size is not getting reflected in the SR. I found the following post for refreshing SR, http://support.citrix.com/article/CTX126473 Do I need to perform these steps manually ? uuid ( RO): abc888bf-a261-d78f-d820-9c388a6934b8 name-label ( RW): vol_500g_hp name-description ( RW): host ( RO): XXX.XXX.XXX.XXX allowed-operations (SRO): VDI.create; VDI.snapshot; PBD.create; PBD.destroy; plug; update; VDI.destroy; scan; VDI.clone; VDI.resize; unplug current-operations (SRO): VDIs (SRO): 26b1aba3-a53c-4da1-86dd-0cb319f02b08; 149112c8-a5c1-43c0-a038-0c47028293e1; 7827016c-3ac7-49f4-83c7-a783eb1b3f70; e9ce9bc9-1e94-48d5-8e14-80a56a022c8b; 85e1f61f-9916-4616-b86b-ea5a1f7fe2e9; f6bab935-52d3-4bcc-b446-fe958fe071fb; 5281f16c-e7f6-41bd-8335-f290c86352dd; 064ba38d-4749-479a-80c0-0d5bd24d77a0; d77e22e8-924a-4c80-a87b-f4a859e686af; 102ad294-ac8c-4fc1-b074-a53abb7446de; 0cc149e6-0083-4348-bc43-8a40ea124457; 90062cbb-c0fa-4bf0-8978-bbc359439d06; 1b34aa2e-6936-4742-861a-877bea90b9f3; cd9ffb17-edac-4657-95b2-fcd44a8fbd44; caccf8df-fc94-4e9e-ab21-2cb6f111a9d5; 9428a799-276d-496b-8e93-f0cca015d89c; 66a9317f-e682-43b3-a79c-2531f5c397d4; fc92cc3f-9012-4daf-8e63-c3b85993d9df; a7ffeaff-41eb-454b-8584-937615316e59; 8f3e7868-7899-4d8a-8592-ec618e19caa8; 158a2026-1873-45f8-b258-a3af9d41b790; 815bd6b8-d647-4cf8-a4c0-25c6fa86cdad; a5145c77-b0fa-498c-bb54-7f449aeb17cd PBDs (SRO): 1fa1a5c9-94eb-4b96-93e0-7387cf72dea2 virtual-allocation ( RO): 295492911104 physical-utilisation ( RO): 298881908736 physical-size ( RO): 536858329088 type ( RO): lvmoiscsi content-type ( RO): shared ( RW): false introduced-by ( RO): not in database other-config (MRW): sm-config (MRO): allocation: thick; use_vhd: true; multipathable: true; devserial: scsi-36000d3100023c80a blobs ( RO): local-cache-enabled ( RO): false tags (SRW): On Tue, Jul 2, 2013 at 2:13 PM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do xe sr-list params=all The above command will give the list of all the SR's and their physical size. We need to confirm if the correct size is reported on xenserver. Note: I don't have a 4.1 setup but I have tested your scenario on 3.0.x setup and it works without any issues ( the storage size was updated once I unmanaged and managed the Cluster from UI). -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 1:01 PM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage The output of the above command is blank. On Tue, Jul 2, 2013 at 11:54 AM, Prashanth Reddy Mandadi prashanthreddy.mand...@citrix.com wrote: Can you do #Xe sr-list params=all name-description=200 On one of the Xenserver connected to this storage pool? -Prashanth -Original Message- From: iliyas shirol [mailto:iliyas.shi...@gmail.com] Sent: Tuesday, July 02, 2013 8:02 AM To: users@cloudstack.apache.org Subject: Re: Resize Primary Storage No. Its not updated. Please find the details as below, mysql select * from op_host_capacity where host_id = '200'; ++-++++---+---++---++-+-+ | id | host_id | data_center_id | pod_id | cluster_id | | used_capacity | | reserved_capacity | total_capacity | capacity_type | capacity_state | update_time | created |
Re: A instance with HA offering can not be shutted down in the vmOS.
Create non HA instances (offers). On 29/6/13 9:30 AM, WXR wrote: But a instance owner without the cloudstack UI privilege can not stop the vm from cloudstack. So there is no way for him to stop his instance. -- Original -- From: CSG - Ashley Lesterash...@computer-services.com.au; Date: Sat, Jun 29, 2013 03:15 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: A instance with HA offering can not be shutted down in the vmOS. Stop the VM from Cloudstack and it wont restart -Original Message- From: WXR [mailto:474745...@qq.com] Sent: June-29-13 5:14 PM To: users Subject: A instance with HA offering can not be shutted down in the vm OS. If I create an instance without HA compute offering,I can shutdown the vm in the guest vm OS. But If I create an instance with HA compute offering and use shutdown in the guest vm OS,the vm will be started automatically after stopping. I want to use HA but I don't need the auto-start feature. .
Re: Resize root volume on 4.1; only with API?
Thank you for your answer. Hopefully 4.2 will support resizing of root disks via GUI. I'll do it the old fashioned way now. :-) On 2/7/13 2:21 PM, Geoff Higginbottom wrote: There is obviously an API call for this http://cloudstack.apache.org/docs/api/apidocs-4.1/root_admin/resizeVolume.html but you can also do it from the GUI For a Data Volume you need to detach it from the VM, then you can simply choose a new Disk Offering, including Custom to resize the volume, then re-attach it to the VM Unfortunately you cannot resize Root Volumes just yet Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: France [mailto:mailingli...@isg.si] Sent: 02 July 2013 11:42 To: users@cloudstack.apache.org Subject: Resize root volume on 4.1; only with API? Hi all, before upgrading to 4.1 (from 3.0.2) i was resizing root volumes using XenCenter and updating the correct entry in the cloud db. I vaguely remember, that 4.1 should support resizing of root volumes. Maybe it's only supported via API call? Am i mistaken? How can one do it with GUI? Regards, F. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Changing compute offering needs a restarting to take effect.
When I stop a instance and change its compute offering from one to another(e.g. 1 cpu to 2 cpus),the vm's compute offering will not change to the new one after the first starting.And if I restart the vm again,it will apply the new computer offering. Why?
RE: Changing compute offering needs a restarting to take effect.
What version of CloudStack, and also what HyperVisor are you using Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 14:49 To: users Subject: Changing compute offering needs a restarting to take effect. When I stop a instance and change its compute offering from one to another(e.g. 1 cpu to 2 cpus),the vm's compute offering will not change to the new one after the first starting.And if I restart the vm again,it will apply the new computer offering. Why? This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
System integrity check failed. Refuse to startup
The cloudstack-management service can not start normally. The logs indicate the reason but I don't know how to get rid of the issue. 2013-07-02 19:26:09,078 INFO [utils.component.ComponentContext] (Timer-1:null) Running SystemIntegrityChecker managementServerNode 2013-07-02 19:26:09,080 ERROR [utils.component.ComponentContext] (Timer-1:null) System integrity check failed. Refuse to startup
RE: Re:RE: Changing compute offering needs a restarting to take effect.
I've just tested 4.1 with XenServer 6.1 and it works as expected, unfortunately my KVM test rig is running 4.0.2 and not 4.1 Can you test using the API rather than the GUI, and if you get the same outcome, log a bug for this as I have just searched for any related bugs and there do not appear to be any. Anyone on the @users list know if this is a known issue? Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:18 To: users Subject: Re:RE: Changing compute offering needs a restarting to take effect. cloudstack4.1,use kvm as hypervisor. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 09:57 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Changing compute offering needs a restarting to take effect. What version of CloudStack, and also what HyperVisor are you using Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 14:49 To: users Subject: Changing compute offering needs a restarting to take effect. When I stop a instance and change its compute offering from one to another(e.g. 1 cpu to 2 cpus),the vm's compute offering will not change to the new one after the first starting.And if I restart the vm again,it will apply the new computer offering. Why? This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re:RE: Where are the snapshots generated by schedules?
I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. .
RE: Re:RE: Where are the snapshots generated by schedules?
Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re:RE: Re:RE: Where are the snapshots generated by schedules?
Yes I'm using kvm,but I'm using basic network,not advanced network. The jira link give a solution but I don't know how to do it,I'm not familiar with java and git. What can I do to fix the bug,should I rebuild the project? -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:38 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Where are the snapshots generated by schedules? Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: RE: Changing compute offering needs a restarting to take effect.
Dan Griffith Critical Systems Consulting 980-202-CRIT (980.202.2748) d...@critsyscon.com Twitter https://twitter.com/#!/critsyscon | Google+https://plus.google.com/u/0/110824920679253529613/posts/p/pub| LinkedIn http://www.linkedin.com/in/critsyscon On Tue, Jul 2, 2013 at 10:18 AM, WXR 1485739...@qq.com wrote: cloudstack4.1,use kvm as hypervisor. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 09:57 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Changing compute offering needs a restarting to take effect. What version of CloudStack, and also what HyperVisor are you using Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 14:49 To: users Subject: Changing compute offering needs a restarting to take effect. When I stop a instance and change its compute offering from one to another(e.g. 1 cpu to 2 cpus),the vm's compute offering will not change to the new one after the first starting.And if I restart the vm again,it will apply the new computer offering. Why? This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Volume losts after migrating.
I want to migrate all volumes from one primary storage to another. So I migrate serveral root and data volumes at the same time from the UI. Now one of the vms can not start after migrating,the management log shows that the vm start fails due to can't find volume. How can I find the lost volume and recover it?
RE: Re:RE: Re:RE: Where are the snapshots generated by schedules?
NPE issue for recurring snapshot is fixed long back. This should not occur. Schedule snapshots works the same way we take manually snapshots. For schedule snapshot, CS will create the createsnapshot async job while the schedule occurs to take the snapshot for the volume. Is the schedule snapshot job is created successfully? -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: Tuesday, July 2, 2013 8:34 PM To: users Subject: Re:RE: Re:RE: Where are the snapshots generated by schedules? Yes I'm using kvm,but I'm using basic network,not advanced network. The jira link give a solution but I don't know how to do it,I'm not familiar with java and git. What can I do to fix the bug,should I rebuild the project? -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:38 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Where are the snapshots generated by schedules? Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: RE: Re:RE: Where are the snapshots generated by schedules?
What version of ACS are you on? --David On Tue, Jul 2, 2013 at 11:03 AM, WXR 1485739...@qq.com wrote: Yes I'm using kvm,but I'm using basic network,not advanced network. The jira link give a solution but I don't know how to do it,I'm not familiar with java and git. What can I do to fix the bug,should I rebuild the project? -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:38 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Where are the snapshots generated by schedules? Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: RE: Re:RE: Where are the snapshots generated by schedules?
cloudstack4.1 I download the yum repo from url http://cloudstack.apt-get.eu/rhel/4.1/ I use yum groupinstall Virtualization to install kvm firstly and then use yum install cloudstack-agent to install the agent,because the kvm installed by cloudstack-agent can not work normally. -- Original -- From: David Nalleyda...@gnsa.us; Date: Tue, Jul 2, 2013 11:21 PM To: usersusers@cloudstack.apache.org; Subject: Re: RE: Re:RE: Where are the snapshots generated by schedules? What version of ACS are you on? --David On Tue, Jul 2, 2013 at 11:03 AM, WXR 1485739...@qq.com wrote: Yes I'm using kvm,but I'm using basic network,not advanced network. The jira link give a solution but I don't know how to do it,I'm not familiar with java and git. What can I do to fix the bug,should I rebuild the project? -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:38 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Where are the snapshots generated by schedules? Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. .
Re:RE: Re:RE: Re:RE: Where are the snapshots generated by schedules?
I think the schedule job is created successfully.I can see the text like this: Scheduled Snapshots Time: 1 min past the hr Timezone: [UTC-12:00] GMT-12:00 Keep: 3 -- Original -- From: Rajesh Battalarajesh.batt...@citrix.com; Date: Tue, Jul 2, 2013 11:15 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Re:RE: Where are the snapshots generated by schedules? NPE issue for recurring snapshot is fixed long back. This should not occur. Schedule snapshots works the same way we take manually snapshots. For schedule snapshot, CS will create the createsnapshot async job while the schedule occurs to take the snapshot for the volume. Is the schedule snapshot job is created successfully? -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: Tuesday, July 2, 2013 8:34 PM To: users Subject: Re:RE: Re:RE: Where are the snapshots generated by schedules? Yes I'm using kvm,but I'm using basic network,not advanced network. The jira link give a solution but I don't know how to do it,I'm not familiar with java and git. What can I do to fix the bug,should I rebuild the project? -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:38 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Re:RE: Where are the snapshots generated by schedules? Are you using KVM by any chance, there is currently a ticket logged in relation to Scheduled Snapshots failing on KVM. If so take a look at https://issues.apache.org/jira/browse/CLOUDSTACK-1353 and see if it mirrors your symptoms Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:36 To: users Subject: Re:RE: Where are the snapshots generated by schedules? I'm sure I have added the schedule and I can see it at the bottom of the schedule box. -- Original -- From: Geoff Higginbottomgeoff.higginbot...@shapeblue.com; Date: Tue, Jul 2, 2013 10:27 PM To: users@cloudstack.apache.orgusers@cloudstack.apache.org; Subject: RE: Where are the snapshots generated by schedules? When setting up the recurring snapshot, ensure that after entering the times etc, you click the Add Button, then the Done Button. Failing to click the Add button will result in no Schedule being created Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: WXR [mailto:1485739...@qq.com] Sent: 02 July 2013 15:14 To: users Subject: Where are the snapshots generated by schedules? If I create a snapshot of a volume , I can see it on the snapshot list. But if I create a hourly schedule for a volume and wait enough time(longer than 1 day),I can't see any snapshot associated with the volume on the snapshot list.All snapshots listed are manual. I don't know if the schedule doesn't work correctly,or the snapshots are generated by schedule but not shown on snapshot list. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. . This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. .
RE: Multiple Storage Interfaces
Hi Geoff, Thanks for this. So does that mean I could only have multiple Primary Storage networks and not multiple Secondary Storage networks? The Physical Network 'storage' maps to a Xenserver network of the same name - My thinking is that if I create a second secondary storage volume on a different vlan, I would have to then add in a Cloudstack Management CIDR on the new network, and then in XenServer, ensure that both of the storage networks have the same name. So, on Xenserver I have: Cloud-storage network on Bond0+1 with IP address 192.168.10.1 Cloud-storage network on Bond2+3 with IP address 172.27.100.1 In Cloudstack I would have a single Physical Network called Cloud-storage With the IP Range: 192.168.10.10-192.168.10.20 172.27.100.10-172.27.100.20 And then based on the IP ranges above, my SSVM would be able to talk to both secondary storage devices in both networks. I also thought that you could not vlan tag a storage network in XenServer, but the Administration Guide for XenServer 6.1 seems to say otherwise: 4.3.3.3. Using VLANs with Dedicated Storage NICs Dedicated storage NICs (also known as IP-enabled NICs or simply management interfaces) can be configured to use native VLAN / access mode ports as described above for management interfaces, or with trunk ports and XenServer VLANs as described above for virtual machines. To configure dedicated storage NICs, see Section 4.4.7, Configuring a Dedicated Storage NIC http://support.citrix.com/servlet/KbServlet/download/32307-102-691300/reference.pdf I'll give it a go anyway, and see what happens. Len -Original Message- From: Geoff Higginbottom [mailto:geoff.higginbot...@shapeblue.com] Sent: 02 July 2013 14:57 To: users@cloudstack.apache.org Subject: RE: Multiple Storage Interfaces Hi Len, What you are trying to do is perfectly possible, however confusingly it has nothing to do with the CloudStack Physical Network 'storage'. The CloudStack Storage Network is only used when accessing Secondary Storage, and is something which causes lots of confusion. (re-writing the official docs in relation to this is on my very long list of things to do) All you need to do is create two networks mapped to two different Bonds on your XenServer (assuming you want to use Bonding) then add a two new IPs, mapped to these networks. As XenServer cannot VLAN TAG the traffic for Storage or Management Networks, you will need to set the Switch Ports to Access Ports and let your switch add the appropriate VLAN Tags. This also highlights the need for dedicated NICs, one for each Storage Network, which is advisable in order to get optimum performance. If you are using Jumbo Frames, remember to set the MTU on the Bond, before mapping an IP to the Network. As longs as these CIDRs are unique, and do not overlap your CloudStack Management CIDR, when you add Primary Storage via CloudStack, your XenServers will simply use the appropriate Bond when they communicate with the Storage. Traffic routing is handled automatically by the XenServers based on the destination IPs. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Len Bellemore [mailto:len.bellem...@controlcircle.com] Sent: 02 July 2013 14:02 To: users@cloudstack.apache.org Subject: Multiple Storage Interfaces Hi Guys, Here's my scenario: I am using XenServer as my hypervisor and I have two separate storage networks set up (in Xenserver) One network set up on vlan 100, one network set up on vlan 200 Each network goes to a separate storage device Is it possible, when I create my Zone (advanced) to have multiple Physical Storage Networks? Through the gui it doesn't seem to let me add multiple storage networks, but maybe through the API? Thanks Len IMPORTANT NOTICE. This electronic message contains information from Control Circle Ltd, which may be privileged or confidential. The information is intended for use only by the individual(s) or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is strictly prohibited. If you have received this electronic message in error, please notify me by telephone or email (to the number or email address above) immediately. Activity and use of the ControlCircle e-mail system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system will also be monitored and may be recorded to secure effective operation and for other lawful business purposes This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If
Re: Cloudmonkey create network problem
On Tue, Jul 2, 2013 at 2:33 PM, Anton Rubets plejik@gmail.com wrote: Hi. i try create the shared network with cloudmonkey with command: create network name=Shared-Network displaytext=Shared-Network networkofferingid=f03374d2-a8dc-40ab-8839-94dc31238410 physicalnetworkid=246635bf-1cda-4e1b-bc8f-b4ddb242e81c gateway=10.1.1.1 netmask=225.225.225.0 networkdomain=* startip=10.1.1.2 endip10.1.1.124 zoneid=13fde89f-5eea-4e94-a38b-ede647126022 but always have error HTTP Error 431: if remove the network domain option: HTTP Error 401: Unauthorized Can someone deal with it ? For 403: Try what Geoff suggests. For 401: Check if you're using port 8080, that requires apiKey and secretKey to be set or you've authorization to execute this API (check user type and ACL permissions). Cheers. Thanks
RE: How to find the the vm's volume file in primary storage?
I am not sure how the generation occurs, but they are stored in the volumes table. The id column relates to the uuid in the gui, and the path column is what the file name is I believe. Thanks, David Ortiz Date: Wed, 26 Jun 2013 19:27:29 -0700 Subject: Re: How to find the the vm's volume file in primary storage? From: kirk.jant...@gmail.com To: users@cloudstack.apache.org I haven't looked, but I think they would be correlated to each other in the database tables, or possibly via the api. Regards, Kirk Jantzer http://about.me/kirkjantzer On Jun 26, 2013 10:10 PM, WXR 474745...@qq.com wrote: My primary storage is NFS. When I mount it and list the files in it, I can see lots of files named as uuid.I think they are vm volume files. But the uuid does not match to any vm's uuid or volumes uuid displayed in the cloudstack UI,so if I want to find a vm's volume file on primary storage NFS,I don't know which is the correct one. Can anybody tell me the relationship between the vm and the volume file?
RE: Enable HTTPS for CloudStack Web Interface
Ashley I followed the procedure on 4.0.x and 4.1.x releases and it worked as exected. Regards ilya From: Shanker Balan [mailto:shanker.ba...@shapeblue.com] Sent: Tuesday, July 02, 2013 4:08 AM To: users@cloudstack.apache.org Subject: Re: Enable HTTPS for CloudStack Web Interface On 02-Jul-2013, at 4:12 AM, CSG - Ashley Lester ash...@computer-services.com.aumailto:ash...@computer-services.com.au wrote: Hello, Is anybody able to advise if this is valid for CS 4.02. or a suggestion to get https working ? http://support.citrix.com/article/CTX132008 Hi Ashley, An alternative to modifying Tomcat settings would be to run Apache Web Server+SSL+mod_proxy (or Nginx) on the same server. -- Shanker Balan Managing Consultant [cid:E7CE8425-E245-4C99-B967-713DF2967392@local] M: +91 98860 60539 shanker.ba...@shapeblue.commailto:shanker.ba...@shapeblue.com | www.shapeblue.comhttp://www.shapeblue.com | Twitter:@shapeblue ShapeBlue India, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re:System integrity check failed. Refuse to startup
I just create a new user called abc,then download tomcat7 to the abc home directory and run the start.sh script. Does this operation cause the issue?? -- Original -- From: WXR1485739...@qq.com; Date: Tue, Jul 2, 2013 10:31 PM To: usersusers@cloudstack.apache.org; Subject: System integrity check failed. Refuse to startup The cloudstack-management service can not start normally. The logs indicate the reason but I don't know how to get rid of the issue. 2013-07-02 19:26:09,078 INFO [utils.component.ComponentContext] (Timer-1:null) Running SystemIntegrityChecker managementServerNode 2013-07-02 19:26:09,080 ERROR [utils.component.ComponentContext] (Timer-1:null) System integrity check failed. Refuse to startup