Re: jail/virtual servers and multiple network interfaces
On Thu, 1 Feb 2007, Jeffrey Williams wrote: i.e. a virtual network stack, for the jailed server, that can be bound directly to a separate NIC than the one used by the host environment. This sort of thing can be done with NetBSD/Xen and bridging*, I think. I'd be surprised if there wasn't a vkernel way of doing it. (if not now, then soon) * Networking is not one of my strong sides, but there seem to be at least two ways: http://mail-index.netbsd.org/port-xen/2006/11/15/0005.html (Sorry if this is off topic.) MAgnus
Re: ath(4) major update
On Thu, Feb 01, 2007 at 07:55:24PM +0800, Sepherosa Ziehau wrote: > Hi all, > > Following is a patch updating ath(4) to the latest hal: > http://leaf.dragonflybsd.org/~sephe/ath0.9.20.3.diff > > This patch is against src/sys > > For HEAD users, this patch should be applied cleanly. > > For 1.8 users, you probably need to apply following patch first: > http://leaf.dragonflybsd.org/~sephe/sample.h.diff > > Please test/review it. Hello I applied both patches to 1.8-Release and I get the following error message in dmesg. What is my next step? (This is on a Thinkpad R30 and a D-Link DWL-G650.) TIA. sio1: can't drain, serial port might not exist, disabling ppc0: parallel port not found. Manufacturer ID: 71021200 Product version: 7.1 Product name: Atheros Communications, Inc. | AR5001-- | Wireless LAN Reference Card | 00 | Functions: Network Adaptor, Memory Function Extension: 02808d5b00 Function Extension: 0240548900 Function Extension: 02001bb700 Function Extension: 0280a81201 Function Extension: 0200366e01 Function Extension: 0200512502 Function Extension: 02006cdc02 Function Extension: 0280f93703 Function Extension: 0200a24a04 Function Extension: 0308 Function Extension: 040600032f123456 Function Extension: 0501 CIS reading done ath0: mem 0x8801-0x8801 irq 11 at device 0.0 on cardbus0 ath0: unable to attach hardware; HAL status 3 device_probe_and_attach: ath0 attach returned 6 cbb0: CardBus card activation failed ad0: 38154MB [77520/16/63] at ata0-master UDMA66 acd0: CDROM at ata1-master PIO4
hardware compatibility - Nvidia SATA controller
Hello, I'm trying to install Dragonfly BSD 1.8 on a Dell XPS 600. It has an integrated Nvidia Nforce 4 Intel Edition SATA RAID Controller, but Dragonfly can't find the hard disk attached to it. I looked for hardware compatibility lists, but couldn't find anything referencing different SATA chipsets and what was supported. Mailing list searches seem to indicate that ATAng was not really implemented, but that was a while ago: http://leaf.dragonflybsd.org/mailarchive/kernel/2003-11/msg00043.html Any info on this chipset? Thanks, -Jon
Re: hardware compatibility - Nvidia SATA controller
On 2/2/07, Jon Nathan <[EMAIL PROTECTED]> wrote: Hello, I'm trying to install Dragonfly BSD 1.8 on a Dell XPS 600. It has an integrated Nvidia Nforce 4 Intel Edition SATA RAID Controller, but Dragonfly can't find the hard disk attached to it. I looked for hardware compatibility lists, but couldn't find anything referencing different SATA chipsets and what was supported. Mailing list searches seem to indicate that ATAng was not really implemented, but that was a while ago: http://leaf.dragonflybsd.org/mailarchive/kernel/2003-11/msg00043.html Any info on this chipset? Thanks, -Jon Hello Jon, Have you tried NATA? For NATA, add options PCI_MAP_FIXUP to your kernel, comment out the old ata devices, add device nata, device natadisk and device natapicd. Credits due to [EMAIL PROTECTED] :-) Cheers, Nuno
Re: hardware compatibility - Nvidia SATA controller
* Nuno Antunes <[EMAIL PROTECTED]> [02-02-2007 17:23]: > > On 2/2/07, Jon Nathan <[EMAIL PROTECTED]> wrote: > >Hello, > > > >I'm trying to install Dragonfly BSD 1.8 on a Dell XPS 600. It has an > >integrated Nvidia Nforce 4 Intel Edition SATA RAID Controller, but > >Dragonfly can't find the hard disk attached to it. > > > >I looked for hardware compatibility lists, but couldn't find anything > >referencing different SATA chipsets and what was supported. Mailing > >list searches seem to indicate that ATAng was not really implemented, > >but that was a while ago: > > > >http://leaf.dragonflybsd.org/mailarchive/kernel/2003-11/msg00043.html > > > >Any info on this chipset? Thanks, > > > >-Jon > > > Hello Jon, > > Have you tried NATA? > > For NATA, add options PCI_MAP_FIXUP to your kernel, comment out the > old ata devices, add device nata, device natadisk and device natapicd. > Credits due to [EMAIL PROTECTED] :-) > > Cheers, > Nuno If this isn't in the kernel on the install CD, it's probably not much use to me. You seem to imply that ata and nata are mutually exclusive above. Is this the case? If not, is there a chance that nata could be added to the kernel for future releases? -Jon
Re: hardware compatibility - Nvidia SATA controller
On 2/2/07, Jon Nathan <[EMAIL PROTECTED]> wrote: * Nuno Antunes <[EMAIL PROTECTED]> [02-02-2007 17:23]: > > On 2/2/07, Jon Nathan <[EMAIL PROTECTED]> wrote: > >Hello, > > > >I'm trying to install Dragonfly BSD 1.8 on a Dell XPS 600. It has an > >integrated Nvidia Nforce 4 Intel Edition SATA RAID Controller, but > >Dragonfly can't find the hard disk attached to it. > > > >I looked for hardware compatibility lists, but couldn't find anything > >referencing different SATA chipsets and what was supported. Mailing > >list searches seem to indicate that ATAng was not really implemented, > >but that was a while ago: > > > >http://leaf.dragonflybsd.org/mailarchive/kernel/2003-11/msg00043.html > > > >Any info on this chipset? Thanks, > > > >-Jon > > > Hello Jon, > > Have you tried NATA? > > For NATA, add options PCI_MAP_FIXUP to your kernel, comment out the > old ata devices, add device nata, device natadisk and device natapicd. > Credits due to [EMAIL PROTECTED] :-) > > Cheers, > Nuno If this isn't in the kernel on the install CD, it's probably not much use to me. You seem to imply that ata and nata are mutually exclusive above. Is this the case? If not, is there a chance that nata could be added to the kernel for future releases? -Jon Yes, i think NATA is mutually exclusive with ATA and it's not enabled by default. NATA is supposed to replace old ATA in the future when more testing is performed. Nuno.
DragonFlyBSD Thread on osnews
FYI -- there was a DragonFlyBSD 1.8 announcement on osnews, with a thread discussing Linux scalability vs DragonFlyBSD, which might bear an educated response: http://www.osnews.com/comment.php?news_id=17114&offset=30&rows=34&threshold=-1 I admit I'm not the most experienced kernel programmer in the world, but I have a few years of Linux and AIX kernel programming experience. Maybe you are more qualified, I don't know. You say Linux scales up to 2048 CPUs, but on what kind of system? The top end of the SGI Altix line of Linux supercomputers runs 4096 CPUs, and IBM validated Linux on a 2048-CPU System P. Linux scales to 1024 CPUs without any serious lock contention. At 2048 it shows some contention for root and /usr inode locks, but no serious performance impact. Directory traversal will be the first to suffer as we move toward 4096 CPUs and higher, so that's where the current work is focused. Is this the same kernel I get on RHEL. Can I use this same kernel on a 4 CPU systemm? What Linux version allows you to mix any amount of computers with whatever amount of cpus and treats them all as one logical computer while being able to scale linearly? Choose the latest SMP kernel image from Red Hat. The feature that allows this massive scaling is called scheduler domains, introduced by Nick Piggin at version 2.6.7 (in 2004). There is no special kernel config flag or recompilation required to activate this feature, but there are some tunables you need to set (via a userspace interface) to reflect the topology of your supercomputer (i.e. grouping CPUs in a tree of domains). Usually massive supercomputers are installed, configured, and tuned by the vendor. They'd probably compile a custom kernel instead of using the default RHEL image. But it could work out of the box if you really wanted it to. ..rather than rely on locking, spinning, threading processes to infinity, it will assign processes to cpus and then allow the processes to communicate to each other through messages. That's fine. It's just that nobody has proven that message passing is more efficient than fine-grained locking. It's my understanding (correct me if I'm wrong) that DF requires that, in order to modify the hardware page table, a process must to send a message to all other CPUs and block waiting for responses from all of them. In addition, an interrupted process is guaranteed to resume on the same processor after return from interrupt even if the interrupt modified the local runqueue. The result is that minor page faults (page is resident in memory but not in the hardware page table) become blocking operations. Plus, you have interrupts returning to threads that have become blocked by the interrupt (and must immediately yield), and the latency for waking up the highest priority thread on a CPU can be as high as one whole timeslice. DF has serialization resources, but they are called tokens instead of locks. I'm not quite sure what the difference is. There also seems to be a highly-touted locking system that allows multiple writers to write to different parts of a file, which is interesting because Linux, FreeBSD, and even SVR4 have extent-based filocks that do the same thing. What's different about this method? I hope I've addressed your questions adequately. Locks are evil, I know, but they seem to be doing quite well at the moment. Maybe by the time DF is ready for production use there will be machines that push other UNIX implementations beyond their capabilities. But for now, Linux is a free kernel for over a dozen architectures that scales better than some proprietary UNIX kernels do on their target architecture. That says a lot about the success of its design
Re: hardware compatibility - Nvidia SATA controller
Which reminds me. Has there been done any progress on nataraid from Thomas?
Re: DragonFlyBSD Thread on osnews
From what I gathered across this mailing list. DF can't scale nowhere close to Linux at the moment because DF still operates under the BGL. Petr
Re: vkernel migration
:> A great example is already in DragonFly - process checkpointing. I :> don't even know how it works as well as it does. : :Has this been coupled with the new vkernel mods yet? In other words, :could I build a checkpointable kernel and then pause it, put it away :for a month, and come back to it? ( Pardon me if I'm sounding naive :here. :) ) :-- :Dave Hayes - Consultant - Altadena CA, USA - [EMAIL PROTECTED] :>>> The opinions expressed above are entirely my own <<< It won't work, but it would not be hard to save and restore the state: * The checkpointing code doesn't understand VPAGETABLE mappings. Offset and page directory settings would have to be saved and restored. * Network (TAP) interface code would have to reopen the interface and re-set its parameters. * Console driver would have to restore the console mode via termios. * Kernel core would have to re-create the VM spaces for the various processes on checkpoint restore (but otherwise would not have to do anything fancy, since the VM spaces are controlled entirely by VPAGETABLE mappings). -Matt Matthew Dillon <[EMAIL PROTECTED]>