nokia 6230
Dear all, can any one share nokia 6230 configuration to work with freebsd in "/dev/cuad0" USB with me. Thanks and regards, -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Re : nokia 6230
i connect it using dku2 cable to send receive sms On Mon, Nov 24, 2008 at 3:12 PM, patrick meye <[EMAIL PROTECTED]> wrote: > what do you atempt? just connect USB cable to your UC and select data > transfert > > ________ > De : Kashif Ali Bukhari <[EMAIL PROTECTED]> > À : Kannel > Envoyé le : Lundi, 24 Novembre 2008, 10h49mn 38s > Objet : nokia 6230 > > Dear all, > can any one share nokia 6230 configuration to work with > freebsd in "/dev/cuad0" USB with me. > > Thanks and regards, > -- > Syed Kashif Ali Bukhari > +92-345-820 > http://www.sysadminsline.com > http://www.kashifbukhari.com > > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: SMPP Server
Nah you can not nativly but there is a module for kannel to act as server. On Fri, Dec 12, 2008 at 9:33 AM, Irfan Malik wrote: > Dear List, > > > > Can we use Kannel as SMPP server? Or is there any open source SMPP Server? > > > > > > > > Regards, > > Irfan Malik > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: WAP Push Issue
you wappush is probably exceeded 160 chracter . please ask telco to switch on concatenation or just try to send some short url with short massage. I guess this issue raised with you on Mobilink Pakistan. ;) On Tue, Feb 10, 2009 at 7:00 PM, Ishtiaq Ahmed wrote: > Hi Users & Admins... > > > I am facing a problem in sending out a wap push to a specific LA... At the > other end its Logical SMSC with SMPP 3.4. I send the push and then also > recieve the delivery report but no message has been delivered to device... I > have checked out everything at my side... > > what I need is the information that either the Guys at the SMSC has to do > some specific configuration for the shortcode to get the wap push through... > > > > > Thanks, > > > Ishtiaq Ahmed > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Help... while sending Wap Push
2-19 12:32:16 [16854] [6] DEBUG: short_message: > 2009-02-19 12:32:16 [16854] [6] DEBUG:Octet string at 0x2c0057a0: > 2009-02-19 12:32:16 [16854] [6] DEBUG: len: 26 > 2009-02-19 12:32:16 [16854] [6] DEBUG: size: 1024 > 2009-02-19 12:32:16 [16854] [6] DEBUG: immutable: 0 > 2009-02-19 12:32:16 [16854] [6] DEBUG: data: 0b 05 04 0b 84 23 f0 00 > 03 00 02 02 6f 61 64 20 .#..oad > 2009-02-19 12:32:16 [16854] [6] DEBUG: data: 43 6f 6e 74 65 6e 74 00 > 01 01 Content... > 2009-02-19 12:32:16 [16854] [6] DEBUG:Octet string dump ends. > 2009-02-19 12:32:16 [16854] [6] DEBUG: SMPP PDU dump ends. > > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Kannel Machine Connection with Operator VPN
Dear Hammad, you can use mikrotik as VPN aggregator as i am also using same produjt with almost all telcos best regards, Kashif Ali [EMAIL PROTECTED] On Fri, Feb 22, 2008 at 10:28 AM, Khan, Hammad Aslam <[EMAIL PROTECTED]> wrote: > Hi All, > > I know this is unrelated to post here about OpenSwan - but i dont find > enough help else where and deadline is killing me... :( > > Operator, I am trying to connect with, wants to use > - Preshared Key (he says we can define only ONE key and u also have to use > the same) > - NATed IP > > Can someone please make me IPSec.conf file for openswan for this > configuration as povided by operator... > > > Site-to-Site VPN Request Form Date: 11-02-2008 > > VPN Configuration ME Operator > Hardware Openswan[Linux] (Dell 2400) Cisco VPN Concentrator 3000 > DH Group Diffie-Helman Group 2 > Production Peer 5.5.5.5 6.6.6.6 > Encryption Domain 192.168.100.21 NAT into 10.5.5.5 172.18.104.244 > Encryption 3DES > Authentication MD5 > Life Time 86400 sec > PreShared Key P_R > Protocol ESP > SMSC Connectivity Customer Operator > Ecnryption domain (SMPP host IP-Address) NATed IP address for SMPP host > 10.5.5.5 10.8.8.8 > 172.18.104.244 > Protocol TCP/Ports 17601-17606 > > > NATed IP added by operator 10.5.125.105 > 192.168.100.21 Our Kannel Machine > > Regards, > Hammad > Flexilogix Inc > > > > > On Tue, Jan 29, 2008 at 4:37 PM, Reza Anwar <[EMAIL PROTECTED]> wrote: > > > Hi Hammad, > > I've actually had some experience connecting Kannel to an SMSC thru a > > VPN. At the time I used a linux box (PC) with FreeS/WAN (http:// > > www.freeswan.org/) as a VPN router interconnected to the operator's > > VPN router (I believe it was Checkpoint VPN-1) without any problems, > > perhaps you can use this setup too. > > > > Regards, > > --Reza > > > > > > > > > > On Jan 29, 2008, at 2:55 PM, Khan, Hammad Aslam wrote: > > > > > Hi All, > > > What is the the best proposed setup for integration of Kannel > > > Machine with operator SMSC? > > > VPN (site-to-site) is a bit costly because of VPN concentrator/ > > > routers. I read some postings in listing that suggested only kannel > > > machine can be directly connected to operator VPN and then to SMSC. > > > > > > Can someone tell me the procedure for that please. > > > > > > Its very urgent as operator is waiting for our VPN access request. > > > > > > regards, > > > hammad > > > > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Urdu / Arabic / UTF-8 Messages
Dear Amir the problem is that most hand sets dont support utf-8 urdu unicodes . best regards, Kashif Ali Aamir Jamil Rao wrote: Hi There, I know this question has been asked again and again , but I couldn't find any example of sending utf-8 / Arabic messages using kannel via PHP or perl. Can someone point me to an example or to some document/mailing list post please. Thanks! Aamir
sending wappush
Dear All, I want to send following URL as wap push along with text. WAP Push URL : http://xxx.xxx.xxx.xxx/xxx/otaservlet?key=57455273941531823472134500568194955622687021467 display Text: Download my application. Best regards, Kashif Ali Bukhari
How add sender number in wappush
Dear kannel list members. I want to send from number ( i.e 300, 500) dynamically using wappush , I am using bellow mentioned script . please guide me how can I sender number. --- php core - http://$host:$port";; $ppg_user = ''; $ppg_pass = ''; $wap_push_id = function_that_generates_a_unique_id(){ return |md5(uniqid(rand(), true));| } $body ="--multipart-boundary\r\n"."Content-type: application/xml\r\n\r\n".''."\r\n".'PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"'."\r\n".'"http://www.wapforum.org/DTD/pap_1.0.dtd"; >'."\r\n".''."\r\n".'push-id="'.$wap_push_id.'">'."\r\n".'address-value="WAPPUSH=+'.$country_code.$phone.'/TYPE=PLMN ppg.nokia.com"/>'."\r\n".'delivery-method="unconfirmed" network="GSM" bearer="SMS"/>'."\r\n"."\r\n\r\n"."--multipart-boundary\r\n"."Content-type: text/vnd.wap.si\r\n\r\n".''."\r\n".'PUBLIC "-//WAPFORUM//DTD SI 1.0//EN"'."\r\n".'"http://www.wapforum.org/DTD/si.dtd";>'."\r\n"."\r\n".'action="signal-high" si-id="'.$wap_push_id.'"href="'.$push_url.'">'.$text.''."\r\n"."\r\n"."--multipart-boundary--\r\n"; $post = "POST /wappush HTTP/1.1\r\n"."Host: $host:$port\r\n"."X-Kannel-SMSC: $smsc_id\r\n".'Content-Type: multipart/related; boundary=multipart-boundary;type="application/xml"'."\r\n"."Content-Length: ".strlen($body)."\r\n"."\r\n".$body; $ch = curl_init(); curl_setopt ($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, 1); curl_setopt($ch, CURLOPT_TIMEOUT, 15); curl_setopt ($ch,CURLOPT_CUSTOMREQUEST , $post); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); $reply = curl_exec($ch); curl_close ($ch); print_r($reply); } ?> //php code- Best regards, Kashif Ali Bukhari
Forward empty SMS to sms-service
Dear All., I am unable to forward empty sms on sms-service, following is my sms-service configuration and kannel.log. If any one send empty sms to my short code system sends him "Request Failed" message in reply and message with some keywords will be delivered to smsinterceptor. ---configuration group = sms-service keyword = * keyword-regex = .* catch-all = yes max-messages = 0 get-url = "http:/xx/xx/smsinterceptor?smsc=%i&sc=%P&ph=%p&kw=%a" ---/configuration Log-- 2008-05-25 20:46:35 Receive SMS [SMSC:telco] [SVC:] [ACT:] [BINF:] [from:+92x] [to:xxx] [flags:-1:0:-1:0:-1] [msg:0:] [udh:0:] 2008-05-25 20:46:36 Sent SMS [SMSC:telco] [SVC:] [ACT:] [BINF:] [from:xxx] [to:+92x] [flags:-1:0:-1:-1:-1] [msg:14:Request Failed] [udh:0:] ---/Log Best regards, Kashif Ali
Re: Problem with SMSCid
Dear PoPo Please use following in "dyn" smsc configuration . preferred-smsc-id = dyn denied-smsc-id = "other" and following in other preferred-smsc-id = other denied-smsc-id = "dyn" Note: if this doesn't help you then send your smpp configuration for both smsc. Best regards, Kashif Ali Bukhari PoPo wrote: Hi all, I have a problem with Kannel / Smsbox : When I call this URL (smsc-id : dyn) : http://myhost:13013/cgi-bin/sendsms?user=***&pass=***&from=Test&to=33***&smsc=dyn&text=test&coding=0 SMSbox send the SMS trough other smsc-id : fix. Log : [EMAIL PROTECTED]:/etc/kannel# tail -f /var/log/kannel/smsc_fix.log 2008-05-28 08:48:57 [18076] [7] DEBUG: Optional parameter length read as 1 2008-05-28 08:48:57 [18076] [7] DEBUG: SMPP[fix]: Got PDU: 2008-05-28 08:48:57 [18076] [7] DEBUG: SMPP PDU 0x8197250 dump: 2008-05-28 08:48:57 [18076] [7] DEBUG: type_name: bind_receiver_resp 2008-05-28 08:48:57 [18076] [7] DEBUG: command_id: 2147483649 = 0x8001 2008-05-28 08:48:57 [18076] [7] DEBUG: command_status: 0 = 0x 2008-05-28 08:48:57 [18076] [7] DEBUG: sequence_number: 1 = 0x0001 2008-05-28 08:48:57 [18076] [7] DEBUG: system_id: "OUT-SMPP" 2008-05-28 08:48:57 [18076] [7] DEBUG: sc_interface_version: 52 = 0x0034 Can you help me please ? Thanks Cyril G.
Re: problem with sqlbox
may be you sms is exceeding 160 characters and telco doesn't support concatenation . Tushar wrote: Hello all, I am running kannel version 1.4.1 with sqlbox patch and TLV patch. I am having following problem with sqlbox : Whenever I am trying to submit monotone or any other binary message with UDH, e.g, let us consider a monotone with UDH = *0605041581* And DATA= *024A3A515195C99404*00791CC512495412424E314492550490938C512495412424E314488498498518520552560520498498498518520552560520498939039038C512612814494812824E20E4144985205D855A51A55849854A00 Now whenever I am trying to send this message through sqlbox. I am getting nothing on my phone when I checked the logs I found out that Sqlbox sent the message with following details: UDH= 0605041581 And DATA = 024A3A515195C99404 I don't know what's happening but I think sqlbox is removing everything after it gets "00" in UDH or data part. If somebody got the same problem, Please help me to fix this. Thanks and regards, Tushar Chauhan
Re: Kannel fails with dlr-storage set as mysql
That mean your rpm does not compiled with mysql support. James Mutuku wrote: Hi, I have installed kannel using rpm files on centos5. I have been trying to set up dlr-storage using mysql...but when I do, kannel(bearerbox and smsbox) fails to start. What could be the problem.
Re: problem with sqlbox
Dear Tushar! Please send the output of lynx http://localhost:13000/status . Best regards Kashif Ali Bukhari Tushar wrote: Hi all, Any updates on this problem. I went through the mysql link but I am confused. Thanks and regards, Tushar Chauhan -Original Message- From: Thomas Göttgens [mailto:[EMAIL PROTECTED] Sent: Friday, May 30, 2008 11:57 PM To: Alejandro Guerrieri Cc: users@kannel.org Subject: Re[2]: problem with sqlbox Hello Alejandro and all, i have come across this before, the same problem, strings terminating after a NULL character. From what i have found out, the strings are handled correctly as octstr in the code, but the actual mysql insert does not encode the payload to a binary insert and hence the 00 clipping occurs within the mysql driver. There is no easy fix because the representation of data needs to be converted to a binary safe syntax for the mysql insert. That's where i stopped, cause i am not that firm in c, and used the method of repeating the port in the UDH sequence like described earlier. a pointer for fixing this in sqlbox would be http://dev.mysql.com/doc/refman/5.0/en/hexadecimal-values.html Thursday, May 29, 2008, 4:38:48 PM, you wrote: The hex values as a string? Could you paste a sample query of what you're doing? Regards, Alejandro On Thu, May 29, 2008 at 6:42 AM, Tushar <[EMAIL PROTECTED]> wrote: I tried with sqlbox-standalone also but the same thing happened again. Can u tell me in what form I should submit the udhdata and msgdata into database. Currently I am inserting the hex values only. Thanks and regards, Tushar Chauhan From: Alejandro Guerrieri [mailto:[EMAIL PROTECTED] Sent: Thursday, May 29, 2008 10:52 AM To: users@kannel.org Subject: Re: problem with sqlbox Well, looks a lot like a bug. Maybe the string is treated as a null terminated C string instead of an Octstr somewhere on sqlbox code. That would explain that behaviour, but more testings are needed to confirm that. Furthermore, the sqlbox patch is quite outdated and deprecated, you should try running the sqlbox-standalone package along with latest stable kannel (the cvs branch is quite stable as well). sqlbox-standalone works independently from kannel, so no patching is necessary on kannel's tree. Maybe the problem was fixed on newer releases, try updating and if the problem persists then let us know. Regards, Alejandro On Thu, May 29, 2008 at 2:15 AM, Tushar <[EMAIL PROTECTED]> wrote: I have already done that …. After putting 1581 instead of I got the UDH right but the message data part was still trimmed after "00" as I have shown below. I need to send the full message. Please help me with this/ Thanks and regards, Tushar Chauhan From: Alejandro Guerrieri [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 28, 2008 8:46 PM To: users@kannel.org Subject: Re: problem with sqlbox Try putting 1581, instead of , should work... Regards, Alejandro On Wed, May 28, 2008 at 11:34 AM, Tushar <[EMAIL PROTECTED]> wrote: No my sms is not exceeding 160 chars. The size of the message pasted below is also 91. so I don't think there is any problem with the size of the message. Moreover the same message is getting delivered when I send it thru' the http url of kannel. Tushar Chauhan From: Kashif Ali Bukhari [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 28, 2008 6:41 PM To: Tushar Cc: users@kannel.org Subject: Re: problem with sqlbox may be you sms is exceeding 160 characters and telco doesn't support concatenation . Tushar wrote: Hello all, I am running kannel version 1.4.1 with sqlbox patch and TLV patch. I am having following problem with sqlbox : Whenever I am trying to submit monotone or any other binary message with UDH, e.g, let us consider a monotone with UDH = 0605041581 And DATA= 024A3A515195C9940400791CC512495412424E314492550490938C512495412424E314488498 498518520552560520498498498518520552560520498939039038C512612814494812824E20 E4144985205D855A51A55849854A00 Now whenever I am trying to send this message through sqlbox. I am getting nothing on my phone when I checked the logs I found out that Sqlbox sent the message with following details: UDH= 0605041581 And DATA = 024A3A515195C99404 I don't know what's happening but I think sqlbox is removing everything after it gets "00" in UDH or data part. If somebody got the same problem, Please help me to fix this. Thanks and regards, Tushar Chauhan
MT/MO over smpp international
Dear all I want a cheapest smpp bnased smsc provider to send MT/MO to international destinations. please refer me -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: MT/MO over smpp international
this list is not for public On Thu, Jul 10, 2008 at 2:45 PM, Iain Dooley <[EMAIL PROTECTED]> wrote: > try [EMAIL PROTECTED] > > On Thu, 10 Jul 2008, Kashif Ali Bukhari wrote: > >> Dear all >> I want a cheapest smpp bnased smsc provider to send MT/MO >> to international destinations. please refer me >> >> -- >> Syed Kashif Ali Bukhari >> +92-300-4295604 >> http://www.sysadminsline.com >> http://www.kashifbukhari.com >> >> > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: MySQL Support with pre compiled Binaries
Why dont you compile it at own? Ubuntu's package management system contains kannel without sqlbox support On Tue, Jul 1, 2008 at 11:20 AM, Engel L <[EMAIL PROTECTED]> wrote: > Hi, > > I have installed Kannel on Ubuntu using a .deb precompiled binary and I want > to enable MySQL support for dlr. Must I unistall the already installed > package and compile the sources myself to enable mysql support? I am hoping > there's something I can do/add/configure to enable mysql with my current > installation as is. > > Please Assist > > Engel Linus -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: KANNEL + SQL BOX data_coding problem.
can you show the version detail and compiling parameters ? P.S use stable reported version. On Mon, Jul 14, 2008 at 1:12 PM, Binary Bilgisayar <[EMAIL PROTECTED]> wrote: > Hi there. > > i am using kannel cvs and sqlbox standalone. > when i send sms from sqlbox, data_coding is being 219, so i can not see the > arrived message right. > > i am looking for this problem to mail archieves about 10 days. i saw a > little solve, while compiling sqlbox, > ideleted one line in sqlbox_pgsql.c : > > msg->sms.mwi = atol_null(13); > > so, i disabled sending mwi value from sqlbox. > > Now, when i send mClass value -1 in sqlbox, smpp data_coding value is 0, > but when i use 0 for mClass, data_coding is being 241. > > How can i solve this problem ??? > > > thanks > Mustafa KEMERCİ > > > Şimdi aileye katılmanın tam zamanı - Yeni nesil Ücretsiz Windows Live > Hizmetlerini şimdi edinin! Buraya tıkla! -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Getting Started with Kannel, Need some help
Please find my response bellow Q. Which GSM modems are guaranteed to work with kannel (also if available in India) A. Soneyericson Q. Is serial connection required ? or can use USB too ? A. You can use serial cable, usb or any pci gsm modem. Q. Which phones are know to work with Kannel and how to make them work with USB connection A. I used nokia 7610, nokia n70 and motorokr e6. Q. Does anyone on list had made kannel work with Motorola A1200 , Nokia 3320 A. E6 and A1200 are in same family A1200 should work for you if E6 is working for me. (I have not tested A1200) Q.My OS is ubuntu 8.04 A. Good I love it ;) -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: unsubscribe
Good bye we would love to see you again (If you successful unsubscribed) On Mon, Jul 14, 2008 at 1:02 PM, Bremer, Gerd <[EMAIL PROTECTED]> wrote: > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: OMA Provisioning
Octet string dump ends. > 2008-07-06 12:35:33 [24659] [3] INFO: /cgi-bin/sendota <> > <8801550155085> > 2008-07-06 12:35:33 [24659] [3] DEBUG: Stored UUID > f8eea752-6c3f-40d8-b0f8-96178d73a625 > 2008-07-06 12:35:33 [24659] [3] DEBUG: message length 424, sending 4 > messages > 2008-07-06 12:35:33 [24659] [3] DEBUG: Status: 202 Answer: > 2008-07-06 12:35:33 [24659] [3] DEBUG: Delayed reply - wait for bearerbox > 2008-07-06 12:35:33 [24659] [0] DEBUG: Got ACK (0) of > f8eea752-6c3f-40d8-b0f8-96178d73a625 > 2008-07-06 12:35:33 [24659] [0] DEBUG: HTTP: Destroying HTTPClient area > 0x950a810. > 2008-07-06 12:35:33 [24659] [0] DEBUG: HTTP: Destroying HTTPClient for > `10.1.4.25'. > > > > > > > > My XML document is > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please help me > > > > > > Thanks > > Zillur > > > > > > > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: SMS MO Cancelation
If Mo is charged then there is no way to refund from your end until your provider agree to payback, do you have data for such client (I.e their numbers)? On Sat, Jun 28, 2008 at 2:52 AM, Marcelo Aguila <[EMAIL PROTECTED]> wrote: > Hi, guys. > > I've got a doubt with this issue. We're impleting a service that sms mo has a > cost and sms mt it's free. > > In the case of system error (for example we couldn't wrote this sms mo > transaction into a database), it's possible, in kannel (operator uses smpp), > to answer in some way that this sms mo doesn't be charged to the client, > because we couldn't finish the transaction succesfully ? > > Regards, > m > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: phone
i found Siemens SL45 and nokia 7610 best for kannel On Thu, Jul 24, 2008 at 1:15 AM, Carachi83 <[EMAIL PROTECTED]> wrote: > I would like to ask you which is the best phone for Kannel??? :) Thank > you. > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Restart Single SMSC
It doesn't required any username in bearer box configuration. 2008/7/24 seik <[EMAIL PROTECTED]>: > well there is no username value in the stop request > > -Original Message- > From: [] > Sent: 23 Юли 2008 г. > To: seik > Subject:Restart Single SMSC > >> Dear members, >> >> I have configured kannel for multiple SMSC's. Now I want to restart >> single SMSC with out disturbing others. I am trying following >> >> Lynx �Cdump "http://mydomain.com:13000/stop-smsc?smscname?passwd=pass"; >> >> I get the message "Denied" >> >> Password is correct but still can't make it work. What could be the possible >> problem? >> >> >> >> >> > > > > > > > No virus found in this outgoing message. > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.5.3/1565 - Release Date: 21.7.2008 _. > 18:36 > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: SMSC connection with Telcel Mexico
Did you ask Telcel Mexico guys to profive you smsc detail ? Please ask them following 1. configuration protocol ( smpp or http ) 2. in case of smpp, ask them smpp protocol version. 3. smsc ip address 4 username 5. password. 6. is it mulit channel or single channle On Fri, Jul 25, 2008 at 4:46 AM, Alvaro Cornejo <[EMAIL PROTECTED]> wrote: > Does anyone has a connection with Telcel Mexico that can share smsc config > info? > > We finally get an SMSC connection with them and will start testing > connectivity next week and I'll like to be ready for the tests so we can > start productions asap. > > Regards > > Alvaro > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: SMPP HOST fail-over method
You can add separate smsc configuration for each ip and use smsc routes On Fri, Jul 25, 2008 at 2:07 PM, Tharanga <[EMAIL PROTECTED]> wrote: > Hi List, > > I have several IP addresses for my smpp account. is there any way to add 2 > or more SMPP host options in the kannel config. (host=x;y). > > So the one server failure will not effect my smpp connection. kannel will > route using the secondary path. (this is possible using Linux HA.), but i > need to enable this on main server. > > any ideas ? > > thanks and regards, > Tharanga > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: HTTPS MO Messages with HTTPS SMSC
that is your solution but does not recommended. On Fri, Jul 25, 2008 at 12:47 PM, sangprabv <[EMAIL PROTECTED]> wrote: > Yes we can setup an Apache either as SSL-Proxy or Proxy-Pass. But it > will add one more hop then. > > Regards, > > > Willy > On Fri, 2008-07-25 at 08:17 +0200, Falko Ziemann wrote: >> Im not sure if kannel support this, but I don't think so. Why don't you >> simply set a apache as SSL-Proxy in front of kannel? >> - makes it much easier >> - you can use the certificate for multiple services >> - you get dozens of howtos >> >> >> [EMAIL PROTECTED] schrieb: >> > Mmmm im not sure if kannel http smsc will support ssl, i dont use it. >> > Maybe you can test that out >> > Sent from my BlackBerry(R) wireless device >> > >> > -Original Message- >> > From: sangprabv <[EMAIL PROTECTED]> >> > >> > Date: Fri, 25 Jul 2008 11:20:45 >> > To: <[EMAIL PROTECTED]> >> > Cc: users >> > Subject: Re: HTTPS MO Messages with HTTPS SMSC >> > >> > >> > Hi, >> > This is not a HTTPS I guess, CMIIW? Some telco requires a SSLed >> > connection this mean if we use HTTP SMSC from Kannel, it should be >> > HTTPS, right? TIA >> > >> > Regards, >> > >> > >> > Willy >> > On Fri, 2008-07-25 at 04:14 +, [EMAIL PROTECTED] wrote: >> > >> >> You can receive them by default on the url http://kannel:port/from to >> >> tex... Just like an mt but without the sendsms uri >> >> Sent from my BlackBerry(R) wireless device >> >> >> >> -Original Message- >> >> From: sangprabv <[EMAIL PROTECTED]> >> >> >> >> Date: Fri, 25 Jul 2008 11:09:11 >> >> To: users >> >> Subject: HTTPS MO Messages with HTTPS SMSC >> >> >> >> >> >> Hi List, >> >> AFAIK, Kannel supports sending MT via HTTPS with HTTP SMSC by >> >> manipulating the send-url directive. But does Kannel supports receiving >> >> MO via HTTPS also (with HTTPS SMSC)? I have read the user guide but >> >> found no clue, or is there any directives to activate it? TIA >> >> >> >> Regards, >> >> >> >> >> >> Willy >> >> >> >> >> >> >> > -- > --- > SMS SERVER, SMS BULK, SMS PREMIUM, WEB DESIGN, NETWORKING > Contact [EMAIL PROTECTED], 62 811 923 464, 62 21 944 8282 4 > http://www.binbit.co.id > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: How to send or receive sms?
Dear usman explaining your problem is half your slution. please explain what you want? On Thu, Jul 31, 2008 at 8:55 AM, <[EMAIL PROTECTED]> wrote: > Hi, > Can anyone tell how to send and receive sms with Kannel. I have attached > nokia 6630 with usb data cable to my PC. > > Regards > > Usman > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Information about nokia 6630
Sl45 is most recomended On Wed, Jul 30, 2008 at 1:21 PM, <[EMAIL PROTECTED]> wrote: > Hi, > Have anyone used nokia 6630 with Kannel? What phone is recommended and > easily available for Kannel. > > > > Usman > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: How to do and check wap on kannel
posting twice will not help you to get quick reply On Fri, Aug 1, 2008 at 9:40 AM, <[EMAIL PROTECTED]> wrote: > Hi, > I have started bearerbox and wapbox with wapkannel.conf file. It seems to > be running fine. Now, I want to test that wap is working or not. What > should I do? The status is fine as http://localhost:13000/status. Its > showing the wapbox is connected at 127.0.0.1. Help? > > Regards > > Usman > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: How to delete specific message from kannel queue
If you are using sql box then just delete specific data from table don't try to remove it from stor file it will crupt file On Thu, Jul 31, 2008 at 9:01 PM, Alvaro Cornejo <[EMAIL PROTECTED]> wrote: > Hi All > > > I've the following issue, I need to delete some messages from kannel since > the destination number is being rejected by carrier. I use kannel with mysql > and flushed dlr but messages still there. The only way I can get read from > them is waiting I have only the specific message in queue - quite diffcult > to do- and restart kannel. > > Is there another way to do that? Also, how to configure kannel to preserve > queue after a reset? I've set storage as mysql but seems not working. > > > > #CORE BEARERBOX > group = core > admin-port = 13000 > smsbox-port = 13001 > wapbox-port = 13002 > dlr-storage = mysql > # usar en vez del MYSQL-DLR > # dlr-storage = internal > admin-password = ** > status-password = ** > #box-allow-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1;10.10.5.2" > box-deny-ip = "*.*.*.*" > log-file = "/var/log/kannel/bearerbox.log" > log-level = 0 > access-log = "/var/log/kannel/beareraccess.log" > > ## > # SMSBOX SETUP > # > group = smsbox > bearerbox-host = 10.10.5.2 > sendsms-chars = "0123456789 +" > sendsms-port = 13013 > global-sender = SmsGlobal > log-file = "/var/log/kannel/smsbox.log" > log-level = 0 > access-log = "/var/log/kannel/smsaccess.log" > http-request-retry = 5 > http-queue-delay = 5 > > CONEXION A MYSQL LOCALHOST > group = mysql-connection > id = mydlr > host = localhost > username = x > password = x > database = kannel_dlr > max-connections = 2 > > > DLR DB DEFINITION > group = dlr-db > id = mydlr > table = tblkannel_dlr > field-smsc = smsc > field-timestamp = ts > field-destination = destination > field-source = source > field-service = service > field-url = url > field-mask = mask > field-status = status > field-boxc-id = boxc > > Regards > > Alvaro > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: coding UCS2
what utf encoding are you using? try with utf-16 On Tue, Jul 29, 2008 at 4:50 PM, bahassi rim hajar <[EMAIL PROTECTED]> wrote: > hi , > > i would like to send a sms coding with UCS2 ,but i have a problem i don't > understand why. > > i have add a variable "coding=2" to the request HTTP and what i have when the > message arrive is nothing. > > Could someone help me. > > regards > > Rim > > > > _ > Envoyez avec Yahoo! Mail. Une boite mail plus intelligente > http://mail.yahoo.fr > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: sms on web tv
Good way to store them in sql and use a ticker to use HTML marque, this is the simplest idea , for professional application you can contact undersign. On Tue, Jul 29, 2008 at 9:30 PM, Carachi83 <[EMAIL PROTECTED]> wrote: > Hi, > > 1)I would like to create a system for a web tv that provides to have sms on > screen meanwhile photos or videos, etc goes on , like the tv programs on Mtv > or AllMusic. > There is someone that can suggest me programs for do it or how do it? > > 2)There is someone that manage to use mobile phone Sony Ericsson K610i with > kannel? > > Thank you > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Message receiving problem with Huawei E169
most chines devices are non standard try some other modem On Wed, Jul 30, 2008 at 7:30 PM, Markus Ebeling <[EMAIL PROTECTED]> wrote: > I'm having a problem receiving messages with Kannel + Huawei E169 + > Ubuntu 8.04.1. Sending works perfectly but nothing happens when I send a > message back to the server's modem. Not a single line appears to log > when a message arrives. > > Does receiving messages work with Huawei modems (is this a configuration > problem) or should I change to Nokia phone instead? > > Here's my kannel.conf > group = core > admin-port = 13000 > smsbox-port = 13001 > admin-password = bar > log-file = "/var/log/kannel/bearerbox.log" > log-level = 0 > box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > sms-resend-freq = 3 > > group = smsc > smsc = at > modemtype = auto > device = /dev/ttyUSB0 > connect-allow-ip = 127.0.0.1 > log-level = 0 > > group = smsbox > bearerbox-host = 127.0.0.1 > sendsms-port = 13013 > global-sender = "+358401234567" > log-level = 0 > log-file = "/var/log/kannel/smsbox.log" > > group = sendsms-user > username = kanneluser > password = password > concatenation = true > max-messages = 100 > > > # SMS SERVICE 'default' > group = sms-service > keyword = nop > text = "You asked nothing and I did it!" > catch-all = true > > include = /etc/kannel/modems.conf > > -- >Markus Ebeling > > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: wap push (PPG)
trusted-pi = false set to true On Tue, Aug 5, 2008 at 8:00 PM, bahassi rim hajar <[EMAIL PROTECTED]> wrote: > hi everyboby, > > i have a problem with wap push and i don't know what's the matter . > > this is my configuration : > > group = core > admin-port = 13000 > smsbox-port = 13001 > wapbox-port = 13002 > wdp-interface-name = "*" > admin-password = bar > box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > > > group = sendsms-user > username = tester > password = foobar > max-messages=5 > concatenation = true > > > # WAPBOX SETUP, for pushing and for pulling (fetching) the wap data > > group = wapbox > bearerbox-host = 127.0.0.1 > > #log-file = "/tmp/wapbox.log" > #log-level = 0 > #syslog-level = none > > # PPG CORE SETUP, for defining the push request interface > > > group = ppg > ppg-url = /cgi-bin/wap-push > ppg-port = 8080 > global-sender= 13013 > ppg-allow-ip = "*.*.*.*" > concurrent-pushes = 100 > ppg-smsbox-id = dlrbox > trusted-pi = false > users = 1024 > > > > # PPG USER SETUP, for authorizing a specific push user > > group = wap-push-user > wap-push-user = tester > ppg-username = tester > ppg-password = foobar > smsbox-id = dlrbox > dlr-url=* > > > # SMSC CONNECTIONS, for pushing SI, SL, MMS notifications or whatever over SMS > > group = smsc > smsc = smpp > host = * > port = * > smsc-username = * > smsc-password = * > system-type = * > address-range = "*" > source-addr-ton=1 > source-addr-npi=1 > > > # SMSBOX SETUP (a kludge!) > > group = smsbox > bearerbox-host = 127.0.0.1 > smsbox-id = dlrbox > sendsms-port = 13013 > global-sender = 13013 > > > > group = sms-service > keyword = default > text = "No service specified" > > > when i use this request : > http://localhost:8080/cgi-bin/wap-push?username=tester&password=foobar&from=13254698&to=21261393828&text=%3c%3fxml+version%3d%221.0%22%3f%3e%0d%0a%3c!DOCTYPE+si+PUBLIC+%22-%2f%2fWAPFORUM%2f%2fDTD+SI+1.0%2f%2fEN%22%0d%0a%22http%3a%2f%2fwww.wapforum.org%2fDTD%2fsi.dtd%22%3e%0d%0a%3csi%3e%0d%0a%3cindication+href%3d%22http%3a%2f%2fwww.gni.ch%22%0d%0asi-id%3d%221%40gni.ch%22%3e%0d%0aYou+have+4+new+emails%0d%0a%3c%2findication%3e%0d%0a%3c%2fsi%3e > > i have this message : You are not allowed to use this service. Do not retry. > > i don't undersand what's matter , pleas help > > regards > > Rim > > > > > _ > Envoyez avec Yahoo! Mail. Une boite mail plus intelligente > http://mail.yahoo.fr > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: How many GSM modem (devices) can kannel handle?
as much you can install On Tue, Aug 12, 2008 at 3:14 PM, Marcin Giedz <[EMAIL PROTECTED]> wrote: > Hello, > > I'd like to configure kannel with some GSM modems. How many modems can I put > in one kannel instance? And second one: do you have any preferable GSM > modems to handle more than 1 port? What I'm trying to find is 2-12 ports > modem. Is there any? > > Regards, > Marcin > > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Send SMS with UDH Set
Simple way! Use database connection and bind your j2me application for specific url along with some authentication feature and hit that url (sms retriever form db) to get sms from server. On Thu, Aug 14, 2008 at 10:13 AM, Jinson <[EMAIL PROTECTED]> wrote: > Hello Group, > > How can I send sms from Kannel with Destination port set. I want to receive > message in a j2me application whcih listens to a port > > -- > > -- Syed Kashif Ali Bukhari +92-300-4295604 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Can anyone please help me?
eceive and >> send >> # messages to handset, but can use GSM modems as virtual SMSCs >> >> >> # This is a fake smsc connection, _only_ used to test the system and >> services. >> # It really cannot relay messages to actual handsets! >> >> group = smsc >> smsc = fake >> smsc-id = FAKE >> port = 1 >> connect-allow-ip = 127.0.0.1 >> >> # This is the actual smsc group >> # smsc-center for different operators: >> #Warid: +880166001 >> #Aktel: +880180104 >> #GP: +880170600 >> #Banglalink: +88019900557 >> >> # This is the smsc for warid sim >> group = smsc >> smsc = at >> smsc-id = smsc_warid >> #denied-smsc-id = smsc_banglalink >> #allowed-smsc-id = smsc_warid >> denied-prefix = "017;018;019;011;015" >> allowed-prefix = "016" >> log-file = "/home/freebdsms/kannel_run/smsc.log" >> log-level = 1 >> modemtype = auto >> device = /dev/warid >> speed = 115200 >> sms-center = +880166001 >> #sim-buffering = true >> >> # This is the smsc for banglalink sim >> group = smsc >> smsc = at >> smsc-id = smsc_banglalink >> #denied-smsc-id = smsc_warid >> #allowed-smsc-id = smsc_banglalink >> denied-prefix = "016" >> allowed-prefix = "017;018;019;011;015" >> log-file = "/home/freebdsms/kannel_run/smsc.log" >> log-level = 1 >> modemtype = auto >> device = /dev/banglalink >> speed = 115200 >> sms-center = +88019900557 >> #sim-buffering = true >> >> #- >> # SMSBOX SETUP >> # >> # Smsbox(es) do higher-level SMS handling after they have been received >> from >> # SMS centers by bearerbox, or before they are given to bearerbox for >> delivery >> group = smsbox >> bearerbox-host = 127.0.0.1 >> #smsbox-id = shoeb >> sendsms-port = 13013 >> global-sender = 13013 >> sendsms-chars = "0123456789 +" >> log-file = "/home/freebdsms/kannel_run/smsbox.log" >> log-level = 1 >> http-request-retry = 0 >> access-log = "/home/freebdsms/kannel_run/smsbox_access.log" >> >> #- >> # SEND-SMS USERS >> # >> # These users are used when Kannel smsbox sendsms interface is used to >> # send PUSH sms messages, i.e. calling URL like >> # >> >> http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar. >> .. >> >> # User for sending messages of general members >> group = sendsms-user >> username = >> password = >> #forced-smsc = smsc_gen_mem >> #default-smsc = smsc_gen_mem >> #user-deny-ip = "" >> #user-allow-ip = "" >> max-messages = 5 >> concatenation = true >> >> # User for sending messages of corporate members >> group = sendsms-user >> username = >> password = >> #forced-smsc = smsc_gen_mem >> #default-smsc = smsc_gen_mem >> #user-deny-ip = "" >> #user-allow-ip = "" >> max-messages = 5 >> concatenation = true >> >> #- >> # SERVICES >> # >> # These are 'responses' to sms PULL messages, i.e. messages arriving from >> # handsets. The response is based on message content. Only one sms-service >> is >> # applied, using the first one to match. >> >> group = sms-service >> keyword = nop >> text = "You asked nothing and I did it!" >> >> >> # There should be always a 'default' service. This service is used when no >> # other 'sms-service' is applied. >> >> group = sms-service >> keyword = default >> omit-empty = true >> get-url = " >> http://www.freebdsms.com/corp_area/save_incoming_msg.php?msg=%a&sender=%p"; >> #text = "No service specified" >> -- next part -- >> An HTML attachment was scrubbed... >> URL: >> http://www.kannel.org/pipermail/users/attachments/20080911/0412c24c/attachment-0001.html > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Sending a Jar File WIth SMS
you cant send jar file via sms, but you can do. 1. put your jar file on wap server. 2. send wappush to client via kannel wappush service. On Fri, Sep 26, 2008 at 1:24 PM, creeds <[EMAIL PROTECTED]> wrote: > > Hello all, > I have a jar file which i want my clients to Download on their respective > Mobile Set by sending sms. > How can i proceed. > For sending text msg , it is quite easy and i have been doing this as... > > > group = sms-service > accepted-smsc = > keyword = test > get-url = "http://ip/path/filename.jsp"; > > i can fetch any data from database or anything and send sms, but i want to > send a jar file or any logos... > how is this possible, > > > regards, > Creeds > > > -- > View this message in context: > http://www.nabble.com/Sending-a-Jar-File-WIth-SMS-tp19683702p19683702.html > Sent from the Kannel - User mailing list archive at Nabble.com. > > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com
Re: Can anyone please help me?
CSV ??? On Tue, Oct 7, 2008 at 10:34 AM, Shoeb Ahmed <[EMAIL PROTECTED]> wrote: > Hi, Thanks for the reply. No I am not using a prebuilt package. I compiled > it myself. However, my problem went away when I used the latest CSV instead > of the 1.4.1 . So everything is fine now. > > On Sat, Oct 4, 2008 at 1:45 PM, Kashif Ali Bukhari <[EMAIL PROTECTED]> > wrote: >> >> seems you are using prebuilt packeg please compile it yourself >> >> On Mon, Sep 22, 2008 at 2:36 PM, Shoeb Ahmed <[EMAIL PROTECTED]> wrote: >> > I sent this message below but haven't got any reply back. Can anyone >> > please >> > provide any insight into this problem? I really really need it to be >> > solved. >> > >> > On Thu, Sep 11, 2008 at 2:43 PM, <[EMAIL PROTECTED]> wrote: >> >> >> >> >> >> Message: 1 >> >> Date: Thu, 11 Sep 2008 14:22:31 +0600 >> >> From: "Shoeb Ahmed" <[EMAIL PROTECTED]> >> >> Subject: Bearerbox crash when using dlr >> >> To: users@kannel.org >> >> Message-ID: >> >><[EMAIL PROTECTED]> >> >> Content-Type: text/plain; charset="iso-8859-1" >> >> >> >> Hi, I have kannel 1.4.1 running in Ubuntu 7.10 for a few months now. It >> >> works perfectly. But recently when I tried to use dlr-url and dlr-mask >> >> when >> >> sending SMS through http interface, bearerbox crashes everytime. I have >> >> tried using both internal dlr storage and mysql dlr storage but that >> >> doesn't >> >> seem to have any effect on it. >> >> >> >> Below is the log of crash: >> >> >> >> 2008-09-11 12:36:16 [5394] [8] PANIC: Memory re-allocation failed >> >> 2008-09-11 12:36:16 [5394] [8] PANIC: System error 12: Cannot allocate >> >> memory >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /usr/local/sbin/bearerbox(gw_panic+0x107) [0x80c4517] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /usr/local/sbin/bearerbox(gw_native_realloc+0x7d) [0x80b8f3d] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: /usr/local/sbin/bearerbox >> >> [0x80c57a5] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /usr/local/sbin/bearerbox(octstr_insert_data+0x63) [0x80c7b23] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /usr/local/sbin/bearerbox(octstr_append_char+0x39) [0x80c7d49] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: /usr/local/sbin/bearerbox >> >> [0x8067e2b] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: /usr/local/sbin/bearerbox >> >> [0x806b19a] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: /usr/local/sbin/bearerbox >> >> [0x80baf31] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /lib/tls/i686/cmov/libpthread.so.0 >> >> [0xb7f3e46b] >> >> 2008-09-11 12:36:17 [5394] [8] PANIC: >> >> /lib/tls/i686/cmov/libc.so.6(clone+0x5e) [0xb7bb973e] >> >> >> >> >> >> When using debug log level, I get this about my smsc: >> >> >> >> 2008-09-11 12:58:32 [6041] [0] INFO: SMS resend retry set to 10. >> >> 2008-09-11 12:58:32 [6041] [0] INFO: DLR rerouting for smsc id >> >> disabled. >> >> 2008-09-11 12:58:32 [6041] [0] DEBUG: Started thread 6 >> >> (gw/smsc/smsc_fake.c:fake_listener) >> >> *2008-09-11 12:58:32 [6041] [0] INFO: DLR rerouting for smsc id >> >> >> >> disabled.* >> >> 2008-09-11 12:58:32 [6041] [0] INFO: Added logfile >> >> `/home/freebdsms/kannel_run/smsc.log' with level `1'. >> >> 2008-09-11 12:58:32 [6041] [0] INFO: AT2[smsc_warid]: configuration >> >> doesn't >> >> show modemtype. will autodetect >> >> 2008-09-11 12:58:32 [6041] [0] DEBUG: Started thread 7 >> >> (gw/smsc/smsc_at.c:at2_device_thread) >> >> *2008-09-11 12:58:32 [6041] [0] INFO: DLR rerouting for smsc id >> >> disabled.* >> >> 2008-09-11 12:58:32 [6041] [0] INFO: Added logfile >> >> `/home/freebdsms/kannel_run/smsc.log' with level `1'. >> >> 2008-09-11 12:58:32 [6041] [0] INFO: AT2[smsc_banglalink]: >> >> configuration >> >> doesn't show modemtype. will autodetect >> >> 2008-09-11 12:58:32 [6041] [0] DEBUG: Started thread 8 >> >> (gw/smsc/smsc_at.c:at2_device_thread) >> >> 2008-09-11 12:58:32 [6041] [0] DEBUG: Started thread 9 &
Re: Nokia N95 & N70 compatabilit
yes On Wed, Sep 24, 2008 at 10:18 PM, Rahul Rulz <[EMAIL PROTECTED]> wrote: > Hi a short question, > > Does our kannel wap gateway supports Nokia > N95 & N70 phones..? > > Thanks, > Raghav. > > > -- Syed Kashif Ali Bukhari +92-345-820 http://www.sysadminsline.com http://www.kashifbukhari.com