Re: Deffered sending

2008-06-28 Thread Falko Ziemann
I don't know how kannel is handling this. I'm just using kannel as a
dumb SMPP and UCP gateway. I know that on these two protocols the
smsc of the receiver stores the message till delivery. I have no idea
how this done by kannel for http and modems. But that can someone else
here surely tell you.

Cheers

2008/6/25 info.ubichip [EMAIL PROTECTED]:
 The smsc is a http generic.

 So if I understand correctly, you say that the sms is transmit to the smsc
 and it up to the smsc entity to deal whith the deffered variable ?

 What about hte send_sms table, is it possible to put sms that will e send
 lately inside ?

 Regards


 -Original Message-
 From: Falko Ziemann [mailto:[EMAIL PROTECTED]
 Sent: mercredi 25 juin 2008 02:21
 To: info.ubichip
 Cc: users@kannel.org
 Subject: Re: Deffered sending

 Hi,

 I don't know how this is done if you use a mobile as sending entity.
 But if you use a smsc uplink via smpp, e.g., the message will be stored till
 delivery in the mno's smsc.
 So if you're connected to a smsc and the message is delivered direct you
 should check if the switch is set in the protocol inside your smsc-logs and
 contact the OMC of your uplink. Many (cheap) aggregators don't support
 deferred delivery.

 Regards
 Falko

 2008/6/25 info.ubichip [EMAIL PROTECTED]:
 Hello,


 Does someone manage to use the deferred variable to send SMS in
 Kannel. I tried it but it looks, the sms was sent at the moment it has
 been written and not N minutes later as I previously setup.

 Thanks for your answer








Re: Deffered sending

2008-06-25 Thread Falko Ziemann
Hi,

I don't know how this is done if you use a mobile as sending entity.
But if you use a smsc uplink via smpp, e.g., the message will be
stored till delivery in the mno's smsc.
So if you're connected to a smsc and the message is delivered direct
you should check if the switch is set in the protocol inside your
smsc-logs and contact the OMC of your uplink. Many (cheap) aggregators
don't support deferred delivery.

Regards
Falko

2008/6/25 info.ubichip [EMAIL PROTECTED]:
 Hello,


 Does someone manage to use the deferred variable to send SMS in Kannel. I
 tried it but it looks, the sms was sent at the moment it has been written
 and not N minutes later as I previously setup.

 Thanks for your answer






RE: Deffered sending

2008-06-25 Thread info.ubichip
The smsc is a http generic. 

So if I understand correctly, you say that the sms is transmit to the smsc
and it up to the smsc entity to deal whith the deffered variable ?

What about hte send_sms table, is it possible to put sms that will e send
lately inside ?

Regards
 

-Original Message-
From: Falko Ziemann [mailto:[EMAIL PROTECTED] 
Sent: mercredi 25 juin 2008 02:21
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Deffered sending

Hi,

I don't know how this is done if you use a mobile as sending entity.
But if you use a smsc uplink via smpp, e.g., the message will be stored till
delivery in the mno's smsc.
So if you're connected to a smsc and the message is delivered direct you
should check if the switch is set in the protocol inside your smsc-logs and
contact the OMC of your uplink. Many (cheap) aggregators don't support
deferred delivery.

Regards
Falko

2008/6/25 info.ubichip [EMAIL PROTECTED]:
 Hello,


 Does someone manage to use the deferred variable to send SMS in 
 Kannel. I tried it but it looks, the sms was sent at the moment it has 
 been written and not N minutes later as I previously setup.

 Thanks for your answer