Error Encoding PDU
Dear frens and kannel users, When i start bearerbox i get Error Encoding PDU .I dont knw why I m getting this error.But still i can send and receive sms. 1 kannel works in text mode or pdu mode ? 2 Error encoding PDU ? Thanks -- Sandesh Pradhan Lalitpur
Re: message is going but it shows errors messages(error encoding PDU)
oh %-| how did it happen. I only posted my minicom settings :confused:. Anyways now the messages are going again but it's going little late. I think my modem is right i.e., ttyACMO beacuse earlier there were no such errors and if any thing wrong happen to my modem then messages should not be go. Are these are the serious error messages or can i ignore them. Thanks Nikos Balkanas-2 wrote: **Sigh** - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Tuesday, February 02, 2010 8:21 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, I did. When i did minicom -s -c on , it opened a menu and in the serial port setup option it shows these settings �───────────────────────────────────────────────────────────────────────� │ A -Serial Device : /dev/ttyS1││ B - Lockfile Location : /var/lock││ C - Callin Program :││ D - Callout Program :││ E -Bps/Par/Bits : 38400 8N1││ F - Hardware Flow Control : Yes││ G - Software Flow Control : No│ │││Change which setting?│└───────────────────────────────────────────────────────────────────────� │ Screen and keyboard ││ Save setup as on ││ Save setup as.. ││ Exit ││ Exit from MinicomS o do i need to change my modem from ttyACM0 to ttys1 in my kannel file orchange here from ttys1 to ttyACM0.Is my mobile connected to ttyS1 modem because here it is showing ttys1 orit's default settings for minicom.ThanksNikos Balkanas-2 wrote: 1) Install minicom or wvdial 2) man minicom or wvdial ;-) Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 11:39 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. How can i talk or check my modem with minicom or wvdial that it's suitable for kannel . Earlier it's work fine. Even before two days messages were still going. But now messages are not going . Thanks Nikos Balkanas wrote: I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Orig inal Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos --- -- Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory
Re: message is going but it shows errors messages(error encoding PDU)
Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? Thanks Basit56 wrote: Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400955.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400970.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400970.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
Hi, Thanks. How can i talk or check my modem with minicom or wvdial that it's suitable for kannel . Earlier it's work fine. Even before two days messages were still going. But now messages are not going . Thanks Nikos Balkanas wrote: I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400970.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27401614.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
1) Install minicom or wvdial 2) man minicom or wvdial ;-) Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 11:39 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. How can i talk or check my modem with minicom or wvdial that it's suitable for kannel . Earlier it's work fine. Even before two days messages were still going. But now messages are not going . Thanks Nikos Balkanas wrote: I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400970.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27401614.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
Hi, I did. When i did minicom -s -c on , it opened a menu and in the serial port setup option it shows these settings ┌───┐ │ A -Serial Device : /dev/ttyS1 │ │ B - Lockfile Location : /var/lock │ │ C - Callin Program : │ │ D - Callout Program : │ │ E -Bps/Par/Bits : 38400 8N1 │ │ F - Hardware Flow Control : Yes │ │ G - Software Flow Control : No │ │ │ │Change which setting? │ └───┘ │ Screen and keyboard │ │ Save setup as on │ │ Save setup as.. │ │ Exit │ │ Exit from Minicom So do i need to change my modem from ttyACM0 to ttys1 in my kannel file or change here from ttys1 to ttyACM0. Is my mobile connected to ttyS1 modem because here it is showing ttys1 or it's default settings for minicom. Thanks Nikos Balkanas-2 wrote: 1) Install minicom or wvdial 2) man minicom or wvdial ;-) Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 11:39 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. How can i talk or check my modem with minicom or wvdial that it's suitable for kannel . Earlier it's work fine. Even before two days messages were still going. But now messages are not going . Thanks Nikos Balkanas wrote: I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http
Re: message is going but it shows errors messages(error encoding PDU)
**Sigh** - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Tuesday, February 02, 2010 8:21 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, I did. When i did minicom -s -c on , it opened a menu and in the serial port setup option it shows these settings �───────────────────────────────────────────────────────────────────────� │ A -Serial Device : /dev/ttyS1││ B - Lockfile Location : /var/lock││ C - Callin Program :││ D - Callout Program :││ E -Bps/Par/Bits : 38400 8N1││ F - Hardware Flow Control : Yes││ G - Software Flow Control : No│ │││Change which setting?│└───────────────────────────────────────────────────────────────────────� │ Screen and keyboard ││ Save setup as on ││ Save setup as.. ││ Exit ││ Exit from MinicomS o do i need to change my modem from ttyACM0 to ttys1 in my kannel file orchange here from ttys1 to ttyACM0.Is my mobile connected to ttyS1 modem because here it is showing ttys1 orit's default settings for minicom.ThanksNikos Balkanas-2 wrote: 1) Install minicom or wvdial 2) man minicom or wvdial ;-) Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 11:39 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. How can i talk or check my modem with minicom or wvdial that it's suitable for kannel . Earlier it's work fine. Even before two days messages were still going. But now messages are not going . Thanks Nikos Balkanas wrote: I mean to try to connect and talk to modem with minicom or wvdial before starting kannel. I presume that your modem is connected to ttyS0 (serial port on your PC). BR, Nikos - Orig inal Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 10:28 AM Subject: Re: message is going but it shows errors messages(error encoding PDU) Hi, Thanks. When i did the out put is [quote] [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A cdc_acm 5-2:1.1: ttyACM0: USB ACM device cdc_acm 5-2:1.1: ttyACM0: USB ACM device [/quote] So did i change my modem from ttyACM0 to ttyS0. Is it? what do you mean by verify with minicom or wvdial. Then if different configure it in kannel. Thanks Nikos Balkanas wrote: Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos --- -- Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how ca n i remove it. Thank you. -- View this message in context:http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message
message is going but it shows errors messages(error encoding PDU)
Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: message is going but it shows errors messages(error encoding PDU)
Hi, Seems your modem is not at /dev/ttyACM0. Find where by: dmesg | grep tty and verify with minicom or wvdial. Then if different configure it in kannel. BR, Nikos - Original Message - From: Basit56 basit_mahm...@live.com To: users@kannel.org Sent: Monday, February 01, 2010 8:28 AM Subject: message is going but it shows errors messages(error encoding PDU) Hi, Hope you all will be fine. When i start my kannel it shows these error messages. : AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:50 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:50 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:52 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:49:56 [12809] [6] DEBUG: Dumping 967 messages to store 2010-01-30 21:49:58 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:00 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such file or directory 2010-01-30 21:50:02 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error encoding PDU! Although the messages are going. Can any one tell me what these errors mean and why they are coming and how can i remove it. Thank you. -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: error encoding pdu
@alvaro ...yes ... you were write !! When i commented the sms-storage variable from modems.conf it worked fine. I dont know whether its an authentic solution but it did worked out for the time being. Thanks !! -- View this message in context: http://www.nabble.com/latest-round-of-updates-tp13571882p19873267.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: error encoding pdu
I have tested Kannel and it works fine when worked out with fakesmsc and auto reply is generated .. but when i tested it with K500i it doesnt replying to a phone number. This is what is shown in the bearerbox shell 2008-10-07 19:39:04 [18117] [6] DEBUG: AT2[k500i]: -- +CMTI: ME,38 2008-10-07 19:39:04 [18117] [6] DEBUG: AT2[k500i]: +CMTI incoming SMS indication: +CMTI: ME,38 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- AT+CMGR=38^M 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- +CMGR: 3,,20 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- 079129330300150531270B813012053900F5FF064B101DEDC603 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: received message from SMSC: +923330005150 2008-10-07 19:39:06 [18117] [6] ERROR: AT2[k500i]: could not decode PDU to a message. 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- OK 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- AT+CMGD=38^M 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- OK I think it has something to do whith this could not decode PDU to a message ... i guess. my modems.conf group is group = modems id = K500i name = K500i detect-string = K500 init-string = AT+CNMI=2,3,0,1,0;+CMEE=1 message-storage = ME # PARA TEST: keepalive-cmd = AT+CSQ reset-string = AT+CFUN=1,0 and the sms-service group is . group = sms-service keyword = to keyword-regex = .* max-messages = 10 text = hello yaar Or there's a problem with my AT+CNMI command ? Plz reply ... i am really in need of it. Regards, wahib -- View this message in context: http://www.nabble.com/latest-round-of-updates-tp13571882p19859776.html Sent from the Kannel - User mailing list archive at Nabble.com.
Re: error encoding pdu
Hi Wahib I think K500 does not support ME storage. If you want to try it, check CNMI for the correct values... |-| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.smsglobal.com.mx y www.pravcom.com On Tue, Oct 7, 2008 at 9:44 AM, wahib [EMAIL PROTECTED] wrote: I have tested Kannel and it works fine when worked out with fakesmsc and auto reply is generated .. but when i tested it with K500i it doesnt replying to a phone number. This is what is shown in the bearerbox shell 2008-10-07 19:39:04 [18117] [6] DEBUG: AT2[k500i]: -- +CMTI: ME,38 2008-10-07 19:39:04 [18117] [6] DEBUG: AT2[k500i]: +CMTI incoming SMS indication: +CMTI: ME,38 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- AT+CMGR=38^M 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- +CMGR: 3,,20 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- 079129330300150531270B813012053900F5FF064B101DEDC603 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: received message from SMSC: +923330005150 2008-10-07 19:39:06 [18117] [6] ERROR: AT2[k500i]: could not decode PDU to a message. 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- OK 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- AT+CMGD=38^M 2008-10-07 19:39:06 [18117] [6] DEBUG: AT2[k500i]: -- OK I think it has something to do whith this could not decode PDU to a message ... i guess. my modems.conf group is group = modems id = K500i name = K500i detect-string = K500 init-string = AT+CNMI=2,3,0,1,0;+CMEE=1 message-storage = ME # PARA TEST: keepalive-cmd = AT+CSQ reset-string = AT+CFUN=1,0 and the sms-service group is . group = sms-service keyword = to keyword-regex = .* max-messages = 10 text = hello yaar Or there's a problem with my AT+CNMI command ? Plz reply ... i am really in need of it. Regards, wahib -- View this message in context: http://www.nabble.com/latest-round-of-updates-tp13571882p19859776.html Sent from the Kannel - User mailing list archive at Nabble.com.
RE: clearing sim messages (was Re: error encoding pdu)
Hi Ian Yes and No. Kannel deletes the messages after it is able to read the incomming message; however as in this cases, it receives an error regarding no message found, kannel think there are no messages thus does not delete anything, thus those messages stay in sim Regards -Mensaje original- De: Iain Dooley [mailto:[EMAIL PROTECTED] Enviado el: Viernes, 04 de Enero de 2008 21:03 Para: Alvaro Cornejo CC: users@kannel.org Asunto: clearing sim messages (was Re: error encoding pdu) Hi Alvaro, Regarding the +CMTI error, I do receive them when the incomming message get corrupted somehow -don´t know the reason yet- but it seems to be related to another error I get from my modem: SIM BUSY. The effect of this is that after all modem memories locations get full, the modem stop receiving messages. The workarround I use is to stop kannel, read all modem memory locations (AT+CMGL) then delete memories (AT+CMGD=x, Where x is the memory location to be deleted. Varies according to the modem), then start kannel. After that I do manually insert the messages to my system in order to process the received message. hmm in the past i never had to worry about the sim memory because i kannel seemed to just delete messages as soon as it read them. is that not the case? You might also want to add AT+CMEE=x into modem init string to enable modem error verbose to help debugging. okay i'll try this as well. cheers iain
Re: error encoding pdu
Hi Ian Regarding the +CMTI error, I do receive them when the incomming message get corrupted somehow -don´t know the reason yet- but it seems to be related to another error I get from my modem: SIM BUSY. The effect of this is that after all modem memories locations get full, the modem stop receiving messages. The workarround I use is to stop kannel, read all modem memory locations (AT+CMGL) then delete memories (AT+CMGD=x, Where x is the memory location to be deleted. Varies according to the modem), then start kannel. After that I do manually insert the messages to my system in order to process the received message. You might also want to add AT+CMEE=x into modem init string to enable modem error verbose to help debugging. Hope helps Regards Alvaro On 1/3/08, Iain Dooley [EMAIL PROTECTED] wrote: hi all, i've found this error popping up in the list archives but no definitive answers. this appears in my smsc.log file on startup: 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: opening device 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: init device 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: speed set to 115200 2008-01-04 02:02:19 [4046] [6] INFO: AT2[WT]: Phase 2+ is supported 2008-01-04 02:02:19 [4046] [6] INFO: AT2[WT]: AT SMSC successfully opened. 2008-01-04 02:02:21 [4046] [6] ERROR: AT2[WT]: Error encoding PDU! 2008-01-04 02:02:21 [4046] [6] ERROR: System error 2: No such file or directory i can receive/send messages okay so i don't know which PDU or file it's referring to. also, once per day i see the following: 2008-01-03 21:52:07 [4034] [6] ERROR: System error 1: Operation not permitted 2008-01-03 21:57:25 [4034] [6] ERROR: AT2[WT]: got +CMT but pdu_extract failed 2008-01-03 21:57:25 [4034] [6] ERROR: AT2[WT]: CMTI notification received, but no message found in memory! the ttyUSB0 file is permissions 777 and as i said i can receive messages on the system, however the only problem is that after running for a while it takes a really really long time (like 15 minutes) to process messages. can anyone shed some light on the situation? cheers iain -- |-| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.smsglobal.com.mx y www.pravcom.com
clearing sim messages (was Re: error encoding pdu)
Hi Alvaro, Regarding the +CMTI error, I do receive them when the incomming message get corrupted somehow -don´t know the reason yet- but it seems to be related to another error I get from my modem: SIM BUSY. The effect of this is that after all modem memories locations get full, the modem stop receiving messages. The workarround I use is to stop kannel, read all modem memory locations (AT+CMGL) then delete memories (AT+CMGD=x, Where x is the memory location to be deleted. Varies according to the modem), then start kannel. After that I do manually insert the messages to my system in order to process the received message. hmm in the past i never had to worry about the sim memory because i kannel seemed to just delete messages as soon as it read them. is that not the case? You might also want to add AT+CMEE=x into modem init string to enable modem error verbose to help debugging. okay i'll try this as well. cheers iain
error encoding pdu
hi all, i've found this error popping up in the list archives but no definitive answers. this appears in my smsc.log file on startup: 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: opening device 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: init device 2008-01-04 02:02:07 [4046] [6] INFO: AT2[WT]: speed set to 115200 2008-01-04 02:02:19 [4046] [6] INFO: AT2[WT]: Phase 2+ is supported 2008-01-04 02:02:19 [4046] [6] INFO: AT2[WT]: AT SMSC successfully opened. 2008-01-04 02:02:21 [4046] [6] ERROR: AT2[WT]: Error encoding PDU! 2008-01-04 02:02:21 [4046] [6] ERROR: System error 2: No such file or directory i can receive/send messages okay so i don't know which PDU or file it's referring to. also, once per day i see the following: 2008-01-03 21:52:07 [4034] [6] ERROR: System error 1: Operation not permitted 2008-01-03 21:57:25 [4034] [6] ERROR: AT2[WT]: got +CMT but pdu_extract failed 2008-01-03 21:57:25 [4034] [6] ERROR: AT2[WT]: CMTI notification received, but no message found in memory! the ttyUSB0 file is permissions 777 and as i said i can receive messages on the system, however the only problem is that after running for a while it takes a really really long time (like 15 minutes) to process messages. can anyone shed some light on the situation? cheers iain