Re: Unable to get projector to work
On 2014-04-03 01:31, Henrik Frisk wrote: Hi all, I reaqlize that the info I'm giving here might be to little to give any good suggestions, but I'm giving it a try nevertheless. I have a MBP with the following graphics card: VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1) I have no problem connecting to a second screen (VGA, Nouveau), but when I connect to a projector (VGA) it doesn't show up at all. No, I don't have the models of the two projectors I've tried with, but I did have the same problem with my other computer and Fedora 15 (that time I was running NVIDIA drivers). Am I missing something obvious here? I wasn't clever enough to look at Xorg.0.log yesterday when I tried the projector (I've been looking through it now but I can't seem to find the right place), but I will next time and perhaps I can provide better information. Best, /Henrik What version of Fedora are you running? On a PC, I just plug the projector in and it works in F18, F19 and F20. Is the Other computer a MBP as well? I wonder if there is some hardware issue that is being a pain if the monitor works and you unplug the monitor and then the projector and it doesn't without a reboot. Something that is detecting the projector and blocking the port. A quick scan of the web shows that this is also a problem for people using just macs. You may need special drivers for the mac. -- Free, full feature astronomy program at http://www.stellarium.org Free Office Suite at http://www.libreoffice.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Unable to get projector to work
Hi, I'm unning Fedora 20, sorry I missed to put that in. Yes, my current laptop is also a MBP. Now, I did do a couple of reboots and tried both VGA and HDMI (mainly to make sure the projector's VGA port wasn't faulty, it is still connected to the display port on my laptop). I will look into the question of drivers. It seems to me that quite a few have had similar problems, also with PCs but you might be right that it is a Mac issue. I will check to see if I can figure it out. /Henrik On Fri, Apr 4, 2014 at 8:16 AM, Robin Laing me...@telusplanet.net wrote: On 2014-04-03 01:31, Henrik Frisk wrote: Hi all, I reaqlize that the info I'm giving here might be to little to give any good suggestions, but I'm giving it a try nevertheless. I have a MBP with the following graphics card: VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1) I have no problem connecting to a second screen (VGA, Nouveau), but when I connect to a projector (VGA) it doesn't show up at all. No, I don't have the models of the two projectors I've tried with, but I did have the same problem with my other computer and Fedora 15 (that time I was running NVIDIA drivers). Am I missing something obvious here? I wasn't clever enough to look at Xorg.0.log yesterday when I tried the projector (I've been looking through it now but I can't seem to find the right place), but I will next time and perhaps I can provide better information. Best, /Henrik What version of Fedora are you running? On a PC, I just plug the projector in and it works in F18, F19 and F20. Is the Other computer a MBP as well? I wonder if there is some hardware issue that is being a pain if the monitor works and you unplug the monitor and then the projector and it doesn't without a reboot. Something that is detecting the projector and blocking the port. A quick scan of the web shows that this is also a problem for people using just macs. You may need special drivers for the mac. -- Free, full feature astronomy program at http://www.stellarium.org Free Office Suite at http://www.libreoffice.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Unable to get projector to work
On Fri, Apr 04, 2014 at 11:51:33AM +0200, Henrik Frisk wrote: Hi, I'm unning Fedora 20, sorry I missed to put that in. Yes, my current laptop is also a MBP. Now, I did do a couple of reboots and tried both Just for those of us who don't recognize the abbreviation, what is MBP??? -- Fred Smith -- fre...@fcshome.stoneham.ma.us - The Lord is like a strong tower. Those who do what is right can run to him for safety. --- Proverbs 18:10 (niv) - -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Unable to get projector to work
On 04/04/14 20:46, Fred Smith wrote: On Fri, Apr 04, 2014 at 11:51:33AM +0200, Henrik Frisk wrote: Hi, I'm unning Fedora 20, sorry I missed to put that in. Yes, my current laptop is also a MBP. Now, I did do a couple of reboots and tried both Just for those of us who don't recognize the abbreviation, what is MBP??? Macbook Pro -- Getting tired of non-Fedora discussions and self-serving posts -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Unable to get projector to work
On Thu, Apr 3, 2014 at 2:31 AM, Henrik Frisk fris...@gmail.com wrote: Hi all, I reaqlize that the info I'm giving here might be to little to give any good suggestions, but I'm giving it a try nevertheless. I have a MBP with the following graphics card: VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1) I have no problem connecting to a second screen (VGA, Nouveau), but when I connect to a projector (VGA) it doesn't show up at all. No, I don't have the models of the two projectors I've tried with, but I did have the same problem with my other computer and Fedora 15 (that time I was running NVIDIA drivers). Since you can connect to a second screen, but not a projector, I assume the fault is with the projector. On some projectors, you need to tell the projector which of its inputs is plugged in (some can have VGA, HDMI, Display Port, USB, and so on). There's probably a button that will search all the inputs once you plug it in. However, more info would be helpful. 1. What Desktop Manager (GNOME, KDE, XFCE, ...) are you using? 2. What does the command $ xrandr say before and after you plug in the projector (and made sure that the projector knows which of its inputs is being used)? 3. Are you using the same cable that you used to successfully connect to a second screen? If not, is the cable bad? Am I missing something obvious here? I wasn't clever enough to look at Xorg.0.log yesterday when I tried the projector (I've been looking through it now but I can't seem to find the right place), but I will next time and perhaps I can provide better information. Best, /Henrik -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org -- Dale Dellutri -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Unable to get projector to work
On Fri, Apr 4, 2014 at 4:26 PM, Dale Dellutri daledellu...@gmail.comwrote: On Thu, Apr 3, 2014 at 2:31 AM, Henrik Frisk fris...@gmail.com wrote: Hi all, I reaqlize that the info I'm giving here might be to little to give any good suggestions, but I'm giving it a try nevertheless. I have a MBP with the following graphics card: VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1) I have no problem connecting to a second screen (VGA, Nouveau), but when I connect to a projector (VGA) it doesn't show up at all. No, I don't have the models of the two projectors I've tried with, but I did have the same problem with my other computer and Fedora 15 (that time I was running NVIDIA drivers). Since you can connect to a second screen, but not a projector, I assume the fault is with the projector. On some projectors, you need to tell the projector which of its inputs is plugged in (some can have VGA, HDMI, Display Port, USB, and so on). There's probably a button that will search all the inputs once you plug it in. However, more info would be helpful. 1. What Desktop Manager (GNOME, KDE, XFCE, ...) are you using? 2. What does the command $ xrandr say before and after you plug in the projector (and made sure that the projector knows which of its inputs is being used)? 3. Are you using the same cable that you used to successfully connect to a second screen? If not, is the cable bad? I'm using Gnome. I don't have access to a projector here but as I wrote in my original post I will make sure to get more info next time I have. The input port, nor the cable would have been the issue as I tried both different ports and different cables. I will get back with more info! Thanks for the help so far. /Henrik -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Unable to get projector to work
Hi all, I reaqlize that the info I'm giving here might be to little to give any good suggestions, but I'm giving it a try nevertheless. I have a MBP with the following graphics card: VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1) I have no problem connecting to a second screen (VGA, Nouveau), but when I connect to a projector (VGA) it doesn't show up at all. No, I don't have the models of the two projectors I've tried with, but I did have the same problem with my other computer and Fedora 15 (that time I was running NVIDIA drivers). Am I missing something obvious here? I wasn't clever enough to look at Xorg.0.log yesterday when I tried the projector (I've been looking through it now but I can't seem to find the right place), but I will next time and perhaps I can provide better information. Best, /Henrik -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
