[ovirt-users] Re: Import Ge0-Replicated Storage Domain fails
Geo-replicating to each other Hm, I don't think it's supported. Can you drop a line to gluster-users mail list ? Ansible is open-source and is already installed on the HE , as most tasks are done with Absible there. For the DR, I think that you need to keep both sites on the same version. At least for Gluster is mandatory. Can you bump the site A version to match B ? Best Regards,Strahil Nikolov Thanks Strahil, I was trying to do this manually first and was under the impression that Red Hat Ansible Engine was fairly expensive, something that we are trying to avoid, hence the oVirt environments. I hadn't realised that our engine on the Site B had installed as 4.4.6 following a rebuild last week. The engine on SIte A is 4.4.5 - not sure if that's an issue in this current failed import test? Our 2 sites are both Primary and will have Production VMs. Both sites will be geo-replicating to each other and therefore will both also be prospective DR sites. Any thoughts would be welcome. Kind Regards Simon... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RR4BGC66JTYF4VFLWFXJNZ2DJM4ZRC2V/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/62RAOFVJ6HKZS75PQ3EWUWAXCRZEM7XN/
[ovirt-users] Re: Import Ge0-Replicated Storage Domain fails
Thanks Strahil, I was trying to do this manually first and was under the impression that Red Hat Ansible Engine was fairly expensive, something that we are trying to avoid, hence the oVirt environments. I hadn't realised that our engine on the Site B had installed as 4.4.6 following a rebuild last week. The engine on SIte A is 4.4.5 - not sure if that's an issue in this current failed import test? Our 2 sites are both Primary and will have Production VMs. Both sites will be geo-replicating to each other and therefore will both also be prospective DR sites. Any thoughts would be welcome. Kind Regards Simon... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RR4BGC66JTYF4VFLWFXJNZ2DJM4ZRC2V/
[ovirt-users] Re: Ovirt 4.4.6.8-1 upload ova as template to multiple hosts
Arik Thanks for the info. My simple setup is just a base for bigger clusters that I have to do and there will be multiple templates that I need to install. I have python programming skills but just needed some simple pointing in the right direction on where to make the addition changes to the code. It takes a little bit of time to get the services and types correct for what you want to accomplish and how it is implemented. Don On Mon, May 24, 2021 at 2:51 PM Arik Hadas wrote: > > > On Mon, May 24, 2021 at 6:49 PM Don Dupuis wrote: > >> Nudging to see if anyone has experience with this? >> >> Don >> >> On Wed, May 19, 2021 at 11:18 PM Don Dupuis wrote: >> >>> I have a single ovirt manager and 2 ovirt hosts, each has a local >>> storage domain. I am using the upload_ova_as_template.py and my template >>> upload works on a single host but not both. If I use the gui method, there >>> is the option of "clone" and putting in a new name for the template. This >>> seems to work most of the time, but it has failed a couple of times also. I >>> would like to add the same "clone" and "name" option to the >>> upload_ova_as_temple.py. What is the best way to do this since I need to >>> have unique UUIDs for the template disks? This is a unique setup in the >>> fact that I can't use shared storage and this should be doable as I was >>> able to do it in the ovirt gui. >>> >> > If it's just a one-time operation, I'd rather try to create a VM out of > the template that was imported successfully (with disk-provisioning = > clone), create a second template out of it, remove the original template > and then upload the template from the OVA to the other storage domain. > > Changing the script to obtain import as clone is also possible but it > requires some programming skills - you'd need to either generate or provide > the script with different name for the template and UUIDs for the disks and > then (1) use the new UUIDs when uploading the disks and (2) change the OVF > that is loaded from the OVA to have the new name and UUIDs before providing > the OVF to the engine. > > >> >>> Thanks >>> Don >>> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/U6Q5P7YKDBJARPPNFJOXAMP2AMKEJDNK/ >> > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HPEET3VX7WPCJI5GSRYTJIT3QTUFOWIX/
[ovirt-users] Re: Cluster stuck in maintenance - Hosts not upgrading as expected
Hi David, you can always prohibit root and also make an exclusion for specific hosts (like oVirt's Engine). Maybe something like : Match Address 192.168.2.5 PermitRootLogin yes Source: https://www.cyberciti.biz/faq/match-address-sshd_config-allow-root-loginfrom-one_ip_address-on-linux-unix/ Best Regards, Strahil Nikolov В понеделник, 24 май 2021 г., 23:07:40 ч. Гринуич+3, David White via Users написа: Thank you, Ritesh. Those logs were perfect, and I immediately found the problem. This was my fault. I had disabled Root Login in /etc/ssh/sshd_config (because let's face it, we all can agree that logging in as root over ssh is normally a bad idea!) I just updated that from "no" to "prohibit-password" and restarted sshd. I'll report back if I still have problems after this. Sent with ProtonMail Secure Email. ‐‐‐ Original Message ‐‐‐ On Monday, May 24, 2021 1:53 AM, Ritesh Chikatwar wrote: > Hello, > > > Can you check at which task the upgrade has struck. Please share the relevant > log at the time. > > > To check at which tasks it failed ssh to ovirt engine and navigate to > directory /var/log/ovirt-engine/host-deploy/ and also share the vdsm logs > from host as well. > > > > On Sun, May 23, 2021 at 7:10 AM Edward Berger wrote: >> I'm saw something similar on a test cluster on CentOS 8.3. >> You can take it out of global maintenance mode by navigating the engine UI >> to edit cluster -> scheduling policy and turn off global maintenance there. >> >> Not sure what else is going on. It wants me to put all three hosts into >> maintenance mode which is impossible. >> >> >> On Sat, May 22, 2021 at 8:36 PM David White via Users >> wrote: >>> I have a 3-node hyperconverged cluster with Gluster filesystem running on >>> RHEL 8.3 hosts. >>> >>> It's been stable on oVirt 4.5. >>> Today, I just upgraded the Engine to v4.6. >>> >>> >>> >>> I then logged into the oVirt manager, navigated to Compute -> Clusters, and >>> clicked on Upgrade. >>> The Status of the cluster does have an exclamation mark that says "Upgrade >>> Cluster Compatibility Level", but my understanding is, I shouldn't do that >>> until all 3 of my hosts have been upgraded. >>> >>> Looking at active tasks, I see that the first host in my cluster is stuck >>> in "Upgrading". >>> It's now been like this for 3 hours, without any visible progress. >>> >>> If I try to launch a VM that is not configured for high availability, the >>> VM fails to launch, and I get a message about the cluster being in >>> "Maintenance Mode" and that none of the hosts satisfies current scheduling >>> restraints. >>> How do I >>> a) Cancel / clear the upgrade and take the cluster out of "maintenance mode" >>> b) Properly upgrade the cluster, since clicking the "Upgrade" button >>> clearly didn't work? >>> >>> Thanks, >>> David >>> >>> >>> Sent with ProtonMail Secure Email. >>> >>> ___ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org >>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>> oVirt Code of Conduct: >>>https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>>https://lists.ovirt.org/archives/list/users@ovirt.org/message/4JIRYDSSKBPBJBIIQMRTNGSASBOQIR6I/ >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >>https://lists.ovirt.org/archives/list/users@ovirt.org/message/CC4J7AGJ7TKSSLKTBRXJN3YOXTPLGKCR/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/P27FWUG43K4ZM2BYRRFS6VZ4HH24B6CL/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BBF3WYCTTNPXHAWBUMZKEOG3JW5UQOZR/
[ovirt-users] Re: Ooops! in last step of Hyperconverged deployment
Maybe you can try to run the ansible code from cockpit under the command line... Sadly, I got no test env to take a look how to do it. Best Regards, Strahil Nikolov В понеделник, 24 май 2021 г., 20:42:22 ч. Гринуич+3, Harry O написа: It's same issue in other browsers. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2ZWSGWOGBLVL5DJOFOCV4H64UM44ENE5/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2MFIAFRWDFKN5PIJCZMOYDQVLDNEBGZ3/
[ovirt-users] Re: Import Ge0-Replicated Storage Domain fails
Hi Simon, I think there was a DR Ansible role to make your life easier. Have you checked section 3 from https://www.ovirt.org/documentation/disaster_recovery_guide/ ? Best Regards, Strahil Nikolov В понеделник, 24 май 2021 г., 18:57:42 ч. Гринуич+3, si...@justconnect.ie написа: Hi All, I have 2 independent Hyperconverged Sites/Data Centers. Site A has a GlusterFS Replica 3 + Arbiter Volume that is Storage Domain data2 This Volume is Geo-Replicated to a Replica 3 + Arbiter Volume at Site B called data2_bdt I have simulated a DR event and now want to import the Ge0-Replicated volume data2_bdt as a Storage Domain on Site B. Once imported I need to import the VMs on this volume to run in Site B. The Geo-Replication now works perfectly (thanks Strahil) but I haven't been able to import the Storage Domain. Please can someone point me in the right direction or documentation on how this can be achieved. Kind Regards Shimme... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LQCTZS6YTKMME2EHBXJEGUM2WDNSYXEC/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PIW37CS6SDJM7ISCAAGDTW2IBLUALJQ5/
[ovirt-users] Re: Cluster stuck in maintenance - Hosts not upgrading as expected
Thank you, Ritesh. Those logs were perfect, and I immediately found the problem. This was my fault. I had disabled Root Login in /etc/ssh/sshd_config (because let's face it, we all can agree that logging in as root over ssh is normally a bad idea!) I just updated that from "no" to "prohibit-password" and restarted sshd. I'll report back if I still have problems after this. Sent with ProtonMail Secure Email. ‐‐‐ Original Message ‐‐‐ On Monday, May 24, 2021 1:53 AM, Ritesh Chikatwar wrote: > Hello, > > Can you check at which task the upgrade has struck. Please share the relevant > log at the time. > > To check at which tasks it failed ssh to ovirt engine and navigate to > directory /var/log/ovirt-engine/host-deploy/ and also share the vdsm logs > from host as well. > > On Sun, May 23, 2021 at 7:10 AM Edward Berger wrote: > > > I'm saw something similar on a test cluster on CentOS 8.3. > > You can take it out of global maintenance mode by navigating the engine UI > > to edit cluster -> scheduling policy and turn off global maintenance there. > > > > Not sure what else is going on. It wants me to put all three hosts into > > maintenance mode which is impossible. > > > > On Sat, May 22, 2021 at 8:36 PM David White via Users > > wrote: > > > > > I have a 3-node hyperconverged cluster with Gluster filesystem running on > > > RHEL 8.3 hosts. > > > > > > It's been stable on oVirt 4.5. > > > Today, I just upgraded the Engine to v4.6. > > > > > > [Screenshot from 2021-05-22 20-29-23.png] > > > > > > I then logged into the oVirt manager, navigated to Compute -> Clusters, > > > and clicked on Upgrade. > > > The Status of the cluster does have an exclamation mark that says > > > "Upgrade Cluster Compatibility Level", but my understanding is, I > > > shouldn't do that until all 3 of my hosts have been upgraded. > > > > > > Looking at active tasks, I see that the first host in my cluster is stuck > > > in "Upgrading". > > > It's now been like this for 3 hours, without any visible progress. > > > > > > If I try to launch a VM that is not configured for high availability, the > > > VM fails to launch, and I get a message about the cluster being in > > > "Maintenance Mode" and that none of the hosts satisfies current > > > scheduling restraints. > > > How do I > > > a) Cancel / clear the upgrade and take the cluster out of "maintenance > > > mode" > > > b) Properly upgrade the cluster, since clicking the "Upgrade" button > > > clearly didn't work? > > > > > > Thanks, > > > David > > > > > > Sent with ProtonMail Secure Email. > > > > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/4JIRYDSSKBPBJBIIQMRTNGSASBOQIR6I/ > > > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/CC4J7AGJ7TKSSLKTBRXJN3YOXTPLGKCR/ publickey - dmwhite823@protonmail.com - 0x320CD582.asc Description: application/pgp-keys signature.asc Description: OpenPGP digital signature ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/P27FWUG43K4ZM2BYRRFS6VZ4HH24B6CL/
[ovirt-users] Re: Ovirt 4.4.6.8-1 upload ova as template to multiple hosts
On Mon, May 24, 2021 at 6:49 PM Don Dupuis wrote: > Nudging to see if anyone has experience with this? > > Don > > On Wed, May 19, 2021 at 11:18 PM Don Dupuis wrote: > >> I have a single ovirt manager and 2 ovirt hosts, each has a local storage >> domain. I am using the upload_ova_as_template.py and my template upload >> works on a single host but not both. If I use the gui method, there is the >> option of "clone" and putting in a new name for the template. This seems to >> work most of the time, but it has failed a couple of times also. I would >> like to add the same "clone" and "name" option to the >> upload_ova_as_temple.py. What is the best way to do this since I need to >> have unique UUIDs for the template disks? This is a unique setup in the >> fact that I can't use shared storage and this should be doable as I was >> able to do it in the ovirt gui. >> > If it's just a one-time operation, I'd rather try to create a VM out of the template that was imported successfully (with disk-provisioning = clone), create a second template out of it, remove the original template and then upload the template from the OVA to the other storage domain. Changing the script to obtain import as clone is also possible but it requires some programming skills - you'd need to either generate or provide the script with different name for the template and UUIDs for the disks and then (1) use the new UUIDs when uploading the disks and (2) change the OVF that is loaded from the OVA to have the new name and UUIDs before providing the OVF to the engine. > >> Thanks >> Don >> > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/U6Q5P7YKDBJARPPNFJOXAMP2AMKEJDNK/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WUY6XZ5SICUFQKWGJ4AZEMDIZZVLIFHV/
[ovirt-users] Re: Ooops! in last step of Hyperconverged deployment
It's same issue in other browsers. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2ZWSGWOGBLVL5DJOFOCV4H64UM44ENE5/
[ovirt-users] Import Ge0-Replicated Storage Domain fails
Hi All, I have 2 independent Hyperconverged Sites/Data Centers. Site A has a GlusterFS Replica 3 + Arbiter Volume that is Storage Domain data2 This Volume is Geo-Replicated to a Replica 3 + Arbiter Volume at Site B called data2_bdt I have simulated a DR event and now want to import the Ge0-Replicated volume data2_bdt as a Storage Domain on Site B. Once imported I need to import the VMs on this volume to run in Site B. The Geo-Replication now works perfectly (thanks Strahil) but I haven't been able to import the Storage Domain. Please can someone point me in the right direction or documentation on how this can be achieved. Kind Regards Shimme... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LQCTZS6YTKMME2EHBXJEGUM2WDNSYXEC/
[ovirt-users] Re: Ovirt 4.4.6.8-1 upload ova as template to multiple hosts
Nudging to see if anyone has experience with this? Don On Wed, May 19, 2021 at 11:18 PM Don Dupuis wrote: > I have a single ovirt manager and 2 ovirt hosts, each has a local storage > domain. I am using the upload_ova_as_template.py and my template upload > works on a single host but not both. If I use the gui method, there is the > option of "clone" and putting in a new name for the template. This seems to > work most of the time, but it has failed a couple of times also. I would > like to add the same "clone" and "name" option to the > upload_ova_as_temple.py. What is the best way to do this since I need to > have unique UUIDs for the template disks? This is a unique setup in the > fact that I can't use shared storage and this should be doable as I was > able to do it in the ovirt gui. > > Thanks > Don > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/U6Q5P7YKDBJARPPNFJOXAMP2AMKEJDNK/
[ovirt-users] Re: What software used to take forever incremental backup from VM?
Hello Annie, I will contact you on priv to address all the inconvenience during a test period. I do believe, that my team will manage it! Jayme - thank for a recommendation here. Pozdrawiam/ Best Regards, Paweł Mączka Chief Technology Officer, VP e-mail: p.mac...@storware.eu Dnia 22.04.2021, 04:10 użytkownik „Annie Blackwell” napisał: Thanks for the advice, I installed vprotect and try to test, but it's not friendly at all, I need an easy to handle tool, not difficult to understand and manage, I don't want to waste my time on exploring it. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K7GFEEHAIXYUVRB47XLWFKGZEHQ7MKW4/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/74TUF6TD3NWUIDCPGSQNE73CXMPHQMP4/
[ovirt-users] Re: Error while deploying Hyperconverged oVirt 4.3.3(el7) + GlusterFS
Hi there! I have to use an older version just because I have to move a currently working server in that one, just to safely upgrade that one. I've just tried to find the filter you said, but unsuccessefully. "[ gx6iUE-369Z-3FDP-aRUQ-Wur0-1Xhf-v4g79j not found ]" Any other suggestion? :) ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RPD54NSV474RBVH7FQ2I6ERT5UM3SCRM/
