[ovirt-users] Re: ovirt and gluster network config
Sorry, I posted this under the wrong title as I had started a post about network config, then figured it out but started out this post without changing the subject ☹ Regards, Bill Bill Dossett Systems Architect Enterprise Cloud & Service Excellence Enterprise IT Services Pitney Bowes M +1 303 725 8163 bill.doss...@pb.com<mailto:bill.doss...@pb.com> pitneybowes.com Pitney Bowes Inc. 4750 Walnut St | Boulder, CO | 80301 Part of Engineering, Software Support or Professional Services? Raise a ticket via Remedy Anywhere [HERE] takes less than a minute CloudForms User Guide available [HERE<https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%20Base/Cloudforms%20User%20Guide/Cloudforms%20-%20User%20Manual%20PB%20v3.pdf>] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VEFYZCGE4F3UXEIIFHDOWRX7DJDQW6NL/
Re: [ovirt-users] Yum Public key for vdsm-4.16.14-0.el7.x86_64.rpm is not installed
The problem is that I put the [ovirt-3.5-pre] name=Latest oVirt 3.5 pre release baseurl=http://resources.ovirt.org/pub/ovirt-3.5-pre/rpm/el$releasever enabled=1 skip_if_unavailable=1 gpgcheck=1 in my yum.repos.d\ovirt-3.5.repo file... which I did as per the release notes, but maybe I shouldn't do this on the nodes. Struggling a bit with releases and version and things. I was only trying 3.5 RC as it may fix a problem I encountered when trying to bond two interfaces... Not sure if that helps anyone else or if I was just being stupid putting it there in the first place :( but on the road again. Thanks Bill From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 27 April 2015 12:37 To: users@ovirt.org Subject: [ovirt-users] Yum Public key for vdsm-4.16.14-0.el7.x86_64.rpm is not installed Hi, sorry to bother everyone, but I am trying to add a 3rd host to my cluster and it keeps failing with the above error. As far as I can think, I have done this exactly the same on all three hosts and this 3rd one is failing. I am using the 3.5 pre release... any idea on what I might have done wrong? Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +1 303 725 8163 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Yum Public key for vdsm-4.16.14-0.el7.x86_64.rpm is not installed
Hi, sorry to bother everyone, but I am trying to add a 3rd host to my cluster and it keeps failing with the above error. As far as I can think, I have done this exactly the same on all three hosts and this 3rd one is failing. I am using the 3.5 pre release... any idea on what I might have done wrong? Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +1 303 725 8163 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding interfaces
Brilliant! I don't know why, but I couldn't seem to find that in searching and googling, but exactly what I needed! Thank you! Bill From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Nathanaël Blanchet Sent: 20 April 2015 08:24 To: users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces Hi, simply follow instructions here :http://www.ovirt.org/OVirt_3.5.2_Release_Notes Notice it is about a RC. The stable release should come very soon now, you might wait for it rather than upgrading two times. Le 17/04/2015 15:47, Bill Dossett a écrit : Sorry- I don't suppose someone could tell me how to upgrade from 3.5.1.1-1.3l6 to 3.5.2rc3 or later...? I have slowly been getting back into working with Linux - I used to download and compile most things and started to get into RPMs but then my job became windows centric and I am woefully out of date. Is it as easy as yum update? As stated this is a PoC so no big deal of I break anything, probably good if I do as that's how you learn fast! I've read the release notes but that seems to be for major releases. So any advice is appreciated. Thanks Bill From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 17 April 2015 07:25 To: Jorick Astrego; users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces Hi, Am using 3.5.1.1-1.el6 - sounds like I need to upgrade... I guess it's time to learn how to do that :) From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jorick Astrego Sent: 17 April 2015 01:34 To: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces On 04/16/2015 09:49 PM, Bill Dossett wrote: Hi, I had a Gluster Cluster running that I setup with oVirt engine... had being the operative word here. Today I connected the second network interface and then went to the host and tried to bond this interface to the ovirt mgmt. network... this is where the had part comes in ;-) Now I have no working interfaces at all, can't ping in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7) I have done this quite a few times on RHEV clusters and it always worked well, very impressed with it. The differences are... RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that's it. I haven't really dug into the /etc/sysconfig/network-scripts to see what normally goes into the config files to create a bonded interface - only to see how to configure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips on fixing it. It's just PoC anyway, so learning. Thanks Which version of ovirt do you run? We had some of these problems in test before, but since 3.5.2rc3 and CentOS 7.1 the problem has been resolved for us. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.eumailto:i...@netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.euhttp://www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding interfaces
Hi, no network manager... I have been sort of doing what you describe. I create my first interface manually with a minimum configuration (when I was first testing ovirt, I was using trunked ports and vlans, so had to do all that manually) then add the host to ovirt-engine and it did it's magic and bonded interfaces for me.. I'm going to try a later release I think as it seems there may have been a bug like this in 3.5.1. Thank you From: Soeren Malchow [mailto:soeren.malc...@mcon.net] Sent: 19 April 2015 14:48 To: Bill Dossett; users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces Hi Bill, First, i would strongly suggest that you check whether the interfaces are explcicitly NOT managed by NetworkManager, thats the way we do it. We have something like this - DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes IPADDR= NETMASK= GATEWAY= BOOTPROTO=none DEFROUTE=yes NM_CONTROLLED=no HOTPLUG=no And - DEVICE=bond0 BONDING_OPTS='miimon=100 updelay=0 downdelay=0 mode=802.3ad xmit_hash_policy=layer3+4' BRIDGE=ovirtmgmt ONBOOT=yes NM_CONTROLLED=no HOTPLUG=no --- Physical interfaces - DEVICE=p3p3 HWADDR= MASTER=bond0 SLAVE=yes ONBOOT=yes MTU=1500 NM_CONTROLLED=no - And we actually create all the interfaces BEFORE ovirt installation even though the files will be regenerated after installing and configuring ovirt (vdsm) That works like a charm for us Cheers Soeren From: Bill Dossett bill.doss...@pb.commailto:bill.doss...@pb.com Date: Thursday 16 April 2015 21:49 To: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: [ovirt-users] bonding interfaces Hi, I had a Gluster Cluster running that I setup with oVirt engine... had being the operative word here. Today I connected the second network interface and then went to the host and tried to bond this interface to the ovirt mgmt. network... this is where the had part comes in ;-) Now I have no working interfaces at all, can't ping in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7) I have done this quite a few times on RHEV clusters and it always worked well, very impressed with it. The differences are... RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that's it. I haven't really dug into the /etc/sysconfig/network-scripts to see what normally goes into the config files to create a bonded interface - only to see how to configure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips on fixing it. It's just PoC anyway, so learning. Thanks Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding interfaces
Sorry- I don't suppose someone could tell me how to upgrade from 3.5.1.1-1.3l6 to 3.5.2rc3 or later...? I have slowly been getting back into working with Linux - I used to download and compile most things and started to get into RPMs but then my job became windows centric and I am woefully out of date. Is it as easy as yum update? As stated this is a PoC so no big deal of I break anything, probably good if I do as that's how you learn fast! I've read the release notes but that seems to be for major releases. So any advice is appreciated. Thanks Bill From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 17 April 2015 07:25 To: Jorick Astrego; users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces Hi, Am using 3.5.1.1-1.el6 - sounds like I need to upgrade... I guess it's time to learn how to do that :) From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jorick Astrego Sent: 17 April 2015 01:34 To: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces On 04/16/2015 09:49 PM, Bill Dossett wrote: Hi, I had a Gluster Cluster running that I setup with oVirt engine... had being the operative word here. Today I connected the second network interface and then went to the host and tried to bond this interface to the ovirt mgmt. network... this is where the had part comes in ;-) Now I have no working interfaces at all, can't ping in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7) I have done this quite a few times on RHEV clusters and it always worked well, very impressed with it. The differences are... RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that's it. I haven't really dug into the /etc/sysconfig/network-scripts to see what normally goes into the config files to create a bonded interface - only to see how to configure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips on fixing it. It's just PoC anyway, so learning. Thanks Which version of ovirt do you run? We had some of these problems in test before, but since 3.5.2rc3 and CentOS 7.1 the problem has been resolved for us. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.eumailto:i...@netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.euhttp://www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding interfaces
Hi, Am using 3.5.1.1-1.el6 - sounds like I need to upgrade... I guess it's time to learn how to do that :) From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jorick Astrego Sent: 17 April 2015 01:34 To: users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces On 04/16/2015 09:49 PM, Bill Dossett wrote: Hi, I had a Gluster Cluster running that I setup with oVirt engine... had being the operative word here. Today I connected the second network interface and then went to the host and tried to bond this interface to the ovirt mgmt. network... this is where the had part comes in ;-) Now I have no working interfaces at all, can't ping in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7) I have done this quite a few times on RHEV clusters and it always worked well, very impressed with it. The differences are... RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that's it. I haven't really dug into the /etc/sysconfig/network-scripts to see what normally goes into the config files to create a bonded interface - only to see how to configure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips on fixing it. It's just PoC anyway, so learning. Thanks Which version of ovirt do you run? We had some of these problems in test before, but since 3.5.2rc3 and CentOS 7.1 the problem has been resolved for us. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.eumailto:i...@netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.euhttp://www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] iSCSI interface to GlusterFS cluster
Hi, Not sure if this can be done using ovirt engine or if I have to do this more at the GlusterFS command level. I have set up a Gluster enabled Cluster with a Volume which is working fine I can mount it using the filesystem thype glusterfs. While I am going to test this with Ovirt and VMs eventually. I am currently exploring using the cluster as an iSCSI target and if that is possible to configure thru ovirt or if I now need to work more at the Gluster command level and don't get to use the nice UI to configure this. Any pointers to what I should read next about this would be appreiciated. Thanks Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] FW: gluster and multipath
Fumble fingered accidental send... From: Bill Dossett Sent: 09 April 2015 11:33 To: users@ovirt.org Subject: gluster and multipath Hi, Just got very confused trying to add create an additional brick on my gluster node (I had created one yesterday and all was fine0 I had already created a partition on my /dev/sdb called sdb1 But when I tried mkfs.xfs (I am using xfs as that was in the example I was following - if LVM or something else would be better I am open to suggestions!) It said /dev/sdb1 no such file or directory - which confused me as this worked yesterday. I deleted the partition recreated it and tried and then it said that the device was busy. It appears that multipathd is the culprit... but what I am struggling with is why it worked yesterday?? I may have created the partition before I pushed the gluster install to it from the ovirt-engine? And does that install multipathd and it is now grabbing my devices? It is the only thing I can think of. And if that is the case - I guess I have to blacklist these devices in multipath.conf while I create the partitions? And reboot and then remove the blacklist and reboot - seems a bit clunky, is there a better way to add partitions and bricks? Or I am just in a vortex wormhole of misunderstanding and grasping at stars to try and pull myself out ? Thankyou for any advice - especially as this may not be so ovirt or a question, but it's what I am working on. Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] gluster and multipath
Hi, Just got very confused trying to add create an additional brick on my gluster node (I had created one yesterday and all was fine0 I had already created a partition on my /dev/sdb called sdb1 But when I tried mkfs.xfs (I am using xfs as that was in the example I was following - if LVM or something else would be better I am open to suggestions!) It said /dev/sdb1 no such file or directory - which confused me as this worked yesterday. I deleted the partition recreated it and tried and then it said that the device was busy. It appears that multipathd is the culprit... but what I am struggling with is why it worked yesterday?? I may have created the partition before I pushed the gluster install to it from the ovirt-engine? And does that install multi Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.doss...@pb.commailto:bill.doss...@pb.com pitneybowes.comhttp://pitneybowes.com/ Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HEREapplewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] gluster export
Hi, Kind of a stupid question, but I couldn’t figure it out today. I setup a gluster cluster with ovirt-engine. Created the volume with a couple of bricks in a replicating cluster. I will eventually be using some of this anyway with ovirt Vms, but also interested in using the glusterfs and cifs and nfs and hopefull iSCSI block to other devices… but I could find out what the export of the glusterfs server:/path was. Is this something I have to setup in addition to the gluster cluster. I thought I had read something that you need to set it up, but then couldn’t find it with all the different documents and windows I had open and it was late. So hoping someone can point me in the right direction for this. Thank you. Bill ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster export
Thank you Patrick, are you doing this on the engine or on the nodes? Thanks again for the input. Bill From: Patrick Russell Date: Wednesday, 8 April 2015 20:13 To: Bill Dossett Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] gluster export Hi BIll, You do need to create the export. Here are the steps we noted from our build. I’ll try and find where we got some of the build ideas from. mkdir -p /gluster/{data,engine,meta,xport}/brick ; mkdir /mnt/lock for i in data engine meta xport ; do gluster volume create ${i} replica 3 hostname:/gluster/${i}/brick hostname:/gluster/${i}/brick hostname:/gluster/${i}/brick ; done gluster volume status for i in data engine meta xport ; do gluster volume set ${i} group virt ; done for i in data engine meta xport ; do gluster volume set ${i} storage.owner-uid 36 ; gluster volume set ${i} storage.owner-gid 36 ; done for i in data engine meta xport ; do gluster volume start ${i} ; done -Patrick On Apr 8, 2015, at 8:32 PM, Bill Dossett bill.doss...@pb.commailto:bill.doss...@pb.com wrote: Hi, Kind of a stupid question, but I couldn’t figure it out today. I setup a gluster cluster with ovirt-engine. Created the volume with a couple of bricks in a replicating cluster. I will eventually be using some of this anyway with ovirt Vms, but also interested in using the glusterfs and cifs and nfs and hopefull iSCSI block to other devices… but I could find out what the export of the glusterfs server:/path was. Is this something I have to setup in addition to the gluster cluster. I thought I had read something that you need to set it up, but then couldn’t find it with all the different documents and windows I had open and it was late. So hoping someone can point me in the right direction for this. Thank you. Bill ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt and glusterfs setup
thanks for all the replies on this… very enlightening. I’ve got a few servers that I am going to deploy with – some dell 2950s and luckily they came out of production recently and all have dual 10Gb cards in them. I’m not sure what they have for local storage yet, so may need to beef that up, but I think it’s going to be a good base lab. I am not planning on anything production, just want to get ahead of the game and this is pretty much just proof of concept at this stage – maybe in a years time or so, once Redhat have certified it, if they do… Thanks Bill From: Darrell Budic Date: Wednesday, February 18, 2015 at 9:51 PM To: Donny D Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] ovirt and glusterfs setup you ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt and glusterfs setup
Hi, I'm in at the deep end... Looking for some advice on if this is possible - and what version I should try I with if so. We are a heavily VMware oriented company... but I am trying to get RHEV/oVirt in the door. Honestly I would prefer oVirt, but if they insist on enterprise support I go to Redhat. So I have had a play with VMware VSAN and know how it works. I am trying to more or less replicate this setup using open source. So VSAN uses 3 or more ESXi nodes, with local harddisks as the storage medium as a virtual SAN. The SAN performance is quite high as you put at least 1 SSD in each node. What is nice is you don't have the NAS element here. VMs are on the local storage, which is partially SSD, so performance is quite good. I went to a Redhat presentation on Redhat storage and GlusterFS and basically this acts as a big software defined NAS which does some pretty cool things, but that's not exactly what I need. I would like to build oVirt on top of CentOS Oss... that have local storage in them that is distributed and redundant in the event of a node failure. And I probably need to try and build this in a lab under Fusion on my Mac Book pro to begin with anyway (that bit I'm farily confident with) and if I get that working can probably get some older kit to try it out for real as a PoC to few people. So, I've set up oVirt before that should be ok, I haven't setup Gluster is there any documents that would help me down this road and make sure I start out using the best version. Any advice or pointers would be gratefully received. Thanks Bill Dossett Systems Architect Tech Central - Global Engineering Services T +44 (0)1923 279353 M +44 (0)777 590 8612 bmailto:jeff.gonza...@pb.comill.doss...@pb.commailto:ill.doss...@pb.com pitneybowes.com Pitney Bowes 6 Hercules Way | Leavesden | WD25 7GS | UK Learn more about Global Engineering Serviceshttp://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx In Engineering? Raise a ticket via Remedy Anywhere [HEREteamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] FW: ovirt and glusterfs setup
Sorry, forgot to copyall... From: Bill Dossett s Sent: 18 February 2015 17:37 To: 'Donny Davis' Subject: RE: [ovirt-users] ovirt and glusterfs setup Well, it seems to be something that RedHat were saying was going to be supported. I am far more familiar with VMware VSAN and that is current a VERY hot topic. With VMware HA and VSAN capabilities and new chassis coming out with very high density drive capabilities and the correct number of nodes, you can lose a node with no more downtime than if compute and storage are separated and it's a helluva lot less expensive than traditional Fibre SAN. Saying that it is in it's infancy. I'm interested in your ovirt deployment - thanks for the kind offer - but very short on time as well as this is a side project - so this may move at a snails pace... so I thought I could get started on my own. I think I instaslled ovirt 3.2 previously... and I did see mention of Gluster Domains. If you let me know what I need to do to have a look at your deployment I would appreciate it. I may be slow at responding though as I am spread very thin right now. Thanks Bill From: Donny Davis [mailto:do...@cloudspin.me] Sent: 18 February 2015 13:30 To: Bill Dossett Subject: RE: [ovirt-users] ovirt and glusterfs setup I can tell you from my experience that you should have your storage and compute node separate. Gluster support is built into ovirt, and you just need to make sure when setting up your engine you tell it to be [both] The architecture you describe whether it be vmware or ovirt is destined to be a disaster. That is my matter of opinion based on my experience. I have a free to use ovirt deployment that you could run your desired setup on. Donny D cloudspin.me From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: Wednesday, February 18, 2015 4:33 AM To: users@ovirt.orgmailto:users@ovirt.org Subject: [ovirt-users] ovirt and glusterfs setup Hi, I'm in at the deep end... Looking for some advice on if this is possible - and what version I should try I with if so. We are a heavily VMware oriented company... but I am trying to get RHEV/oVirt in the door. Honestly I would prefer oVirt, but if they insist on enterprise support I go to Redhat. So I have had a play with VMware VSAN and know how it works. I am trying to more or less replicate this setup using open source. So VSAN uses 3 or more ESXi nodes, with local harddisks as the storage medium as a virtual SAN. The SAN performance is quite high as you put at least 1 SSD in each node. What is nice is you don't have the NAS element here. VMs are on the local storage, which is partially SSD, so performance is quite good. I went to a Redhat presentation on Redhat storage and GlusterFS and basically this acts as a big software defined NAS which does some pretty cool things, but that's not exactly what I need. I would like to build oVirt on top of CentOS Oss... that have local storage in them that is distributed and redundant in the event of a node failure. And I probably need to try and build this in a lab under Fusion on my Mac Book pro to begin with anyway (that bit I'm farily confident with) and if I get that working can probably get some older kit to try it out for real as a PoC to few people. So, I've set up oVirt before that should be ok, I haven't setup Gluster is there any documents that would help me down this road and make sure I start out using the best version. Any advice or pointers would be gratefully received. Thanks Bill Dossett Systems Architect Tech Central - Global Engineering Services T +44 (0)1923 279353 M +44 (0)777 590 8612 bmailto:jeff.gonza...@pb.comill.doss...@pb.commailto:ill.doss...@pb.com pitneybowes.com Pitney Bowes 6 Hercules Way | Leavesden | WD25 7GS | UK Learn more about Global Engineering Serviceshttp://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx In Engineering? Raise a ticket via Remedy Anywhere [HEREteamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute CloudForms User Guide available [HEREhttps://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] vmware type functionality
Hi, I am trying to work out how to do some things that I do in VMware pretty regularly. a.Browse a datastore to see what is on it (from the GUI) b. Find a VM on a data store ... that was in another data center and register the VM with the current data center. Sorry for asking, but I'm not having huge amounts of luck googling on this at the moment - though will probably find the answer immediately after I post this. Thanks Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available (New version coming soon!) Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] overt viewer on mac osx
Hi, I got pretty excited when I found out there was a girt-viewer for mac… if this would work, it means I could manange my ovirt stack from my mac without having to login to my windows VDI. I have downloaded and installed per the instructions - and then downloaded the console.vv file and run the command line to start the viewer with the console.vv - the first time it popped up and then said that spice needed authentication… tried my virt-engine password that didn’t work, hit cancel and it shut down. Tried it again and now it just says it can’t determine the connection type from uri and I have to quit. I am running OSX 10.9.4 and apparently this has only been tested on 10.9.1… hoping there is a fix to make this work, or am I doing something wrong? The command I am using is /Applications/RemoteViewer.app/Contents/MacOS/RemoteViewer Downloads/console.vv and the console.vv is indeed in the Downloads dir off my home dir. Thanks Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] sysprep answers
thank you! Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx On Sep 24, 2014, at 9:30 AM, Omer Frenkel ofren...@redhat.commailto:ofren...@redhat.com wrote: - Original Message - From: Bill Dossett bill.doss...@pb.commailto:bill.doss...@pb.com To: users@ovirt.orgmailto:users@ovirt.org Sent: Wednesday, September 24, 2014 10:57:28 AM Subject: [ovirt-users] sysprep answers Hi, I’ve managed to get my first templates ready to go…. But I am lacking a document that explains how I can add the VMs to my domain. I have sealed the template but the ovirt docs seem to stop there and the redhat ones talk about using rhevm-config commands. I have found the place to set time zone and enter a domain if I edit the template, however to add a computer to our domain we need to use a special account and I don’t see any way of specifying this. Any help or further reading would be appreciated the user that is used by default is the user that is set for the domain you can see it with # engine-manage-domains list or directly from the db # su - postgres -c psql engine -c \select * from vdc_options where option_name = 'AdUserName';\ if you need to use different user, you can do that with 'run-once' option: in the webadmin, select the vm, click run once, under 'boot options' mark floppy and select sysprep, under 'initial run' select go to sysprep, and select 'alternate credentials' in ovirt 3.5 you can also save a custom sysprep file containing any custom data: Bug 1080002 - OVIRT35 - [RFE] Enable user defined Windows Sysprep file Thanks Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.com In Engineering? Raise a ticket via Remedy Anywhere [ HERE ] takes less than a minute ManageIQ User Guide available [ HERE ] Check out the ManageIQ Blog for recent enhancements and information [HERE] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] integration of overt with CloudForms
Hi, I’m finally at the point that I think I would like to try and add my ovirt-engine to our commercial CloudForms portal… I seem to be reading that it is supported - but when adding the provider it asks for the api port for ovirt and I don’t know what that is… does anyone know if it works? and if so what the API port for ovirt-engine is? and anything else that I can read about it doing would be greatly appreciated Thanks! Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] question on VM
In the absence of any comment and continued testing I have found that I can ping the host network IP that the VM is running on... and the host can ping the VM. So it would appear that nothing is wrong with the VM... I could only ping the host from the VM once I stopped iptables, so the firewall was stopping that. But I still can't ping outside of the host or ping the VM from elsewhere... and the VM continues to get an IP address from the DHCP server without issue. I have gone back to my networks and checked them thoroughly and can't see any issues, I have migrated the VM from one host to another and the condition persists in that it can ping the host that it is running on and the host can ping it (providing I turn off the firewall) numerous reboots etc and no change. :( Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] question on VM
Hi, I am creating my first ovirt VM from a windows 2008 R2 iso. After setting it all up, loading the drivers etc it looks fine, but it seems like it has no network connectivity. This is odd as it is obtaining a DHCP address and it looks like it can browse for other windows systems on the network. But I can't ping it, it can't ping out and I can't remote desktop into it. Normally this sounds like a firewall problem, but I disabled that immediately. It is using the virtio driver. It is connected to the default network ovirtmgmt which has a dhcp server on it. Ovirt-engine says the interface is up and connected and windows thinks it is connected to an unknown network with out internet access. I can't ping the default gateway from the VM console. Seems silly, but I've kind of run out of things to try on this now. I am using VLAN tagging on the ovirt-engine network side of things and it is plugged into a trunked port... but I wouldn't think that has anything to do with the VM itself as I am not doing anything with VLANs on the VM itself, it is just connected to it. All the host network/interfaces are pingable in the cluster as well. Thanks if anyone has any ideas what I might be looking for. Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] question on VM
In the absence of any comment and continued testing I have found that I can ping the host network IP that the VM is running on... and the host can ping the VM. So it would appear that nothing is wrong with the VM... I could only ping the host from the VM once I stopped iptables, so the firewall was stopping that. But I still can't ping outside of the host or ping the VM from elsewhere... and the VM continues to get an IP address from the DHCP server without issue. I have gone back to my networks and checked them thoroughly and can't see any issues, I have migrated the VM from one host to another and the condition persists in that it can ping the host that it is running on and the host can ping it (providing I turn off the firewall) numerous reboots etc and no change. :( From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 22 September 2014 16:07 To: users@ovirt.org Subject: [ovirt-users] question on VM Hi, I am creating my first ovirt VM from a windows 2008 R2 iso. After setting it all up, loading the drivers etc it looks fine, but it seems like it has no network connectivity. This is odd as it is obtaining a DHCP address and it looks like it can browse for other windows systems on the network. But I can't ping it, it can't ping out and I can't remote desktop into it. Normally this sounds like a firewall problem, but I disabled that immediately. It is using the virtio driver. It is connected to the default network ovirtmgmt which has a dhcp server on it. Ovirt-engine says the interface is up and connected and windows thinks it is connected to an unknown network with out internet access. I can't ping the default gateway from the VM console. Seems silly, but I've kind of run out of things to try on this now. I am using VLAN tagging on the ovirt-engine network side of things and it is plugged into a trunked port... but I wouldn't think that has anything to do with the VM itself as I am not doing anything with VLANs on the VM itself, it is just connected to it. All the host network/interfaces are pingable in the cluster as well. Thanks if anyone has any ideas what I might be looking for. Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console spice questions
Thank you. IE wasn't telling me about a .vv download... I had reverted to using IE as virt-engine seemed like it was happier with me using IE and warned me that graphic display wasn't optimal with FireFox.. so anyway, I tried FireFox again and it offered to download the .vv file and I opened it and associated it with Remote Viewer and yes it works. Looks like I am back on track again. -Original Message- From: David Jaša [mailto:dj...@redhat.com] Sent: 19 September 2014 13:29 To: Bill Dossett Cc: users@ovirt.org Subject: Re: [ovirt-users] console spice questions Hi, On Pá, 2014-09-19 at 10:26 +, Bill Dossett wrote: Thanks David, I appreciate the help. I installed virt-manager on my virt-engine. That isn't needed. And I have installed virt-viewer on my workstation... This is what I advised. I am still not getting a console though. I don't quite understand if I have to do anything further.. I have checked the faq and looked at the screen shots, but I am not much the wiser... is there any more detail I can read on installing and getting this running? Once you install virt-viewer in Windows, it should be associated with .vv files. When you click Console then, you should be offered with .vv file download, let it open with virt-viewer (should work out-of-the-box) and voilà, you should see your console. If you're not offered with .vv file for download, try choosing Native client method in Console options (and of course if you have spice console selected in VM options) so, I am assuming I connect to virt-engine for this - should the console button in the virt-engine bring up the remote viewer, yes, it should, or do I have to start the remote view separately? no, I turned the firewall off to make sure that isn't the problem. Firewall is not involved unless you restrict outbound connections as well, It appears its trying fire virt-manager up on to a remote x display I guess, but I just get unable to connect to the graphic server spice://ovirt.pbi.global.pvt:5900 again, virt-manager is not the thingy you want, virt-viewer is. HTH, David Any further advice on getting this running would be greatly appreciated. Bill -Original Message- From: David Jaša [mailto:dj...@redhat.com] Sent: 19 September 2014 09:05 To: Bill Dossett Cc: users@ovirt.org Subject: Re: [ovirt-users] console spice questions Hi Bill, Yes, the document is already dated. Lately, you don't have to go through the hoops needed to make spice-x work. Even if you can get it, it will only work for you in IE 11. You should instead just install virt-viewer [1] and the consoles should Just Work for you using the Natice Client (.vv file) method. David [1] http://virt-manager.org/download/ On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote: Hi After setting up an ovirt cluster with 4 hosts and getting my networking and vlans all connected I’m pretty impressed with ovirt. I am however not too impressed with trying to actually get a console into a VM. I’m not sure why this isn’t included in the ovirt engine to begin with as console access to actually configure a VM to make templates of seems a pretty basic tenant of virtualisation. Anyway, I am following the guide http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and trying to download spice.cab to follow the rather long procedure to install, however the link on that page gives a 404 page not found error. Could someone point me to the actual download? Is this document perhaps outdated and I am following the wrong path? Thanks Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com www.pb.com In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less than a minute ManageIQ User Guide available [HERE] Check out the ManageIQ Blog for recent enhancements and information [HERE] __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] console spice questions
Hi After setting up an ovirt cluster with 4 hosts and getting my networking and vlans all connected I'm pretty impressed with ovirt. I am however not too impressed with trying to actually get a console into a VM. I'm not sure why this isn't included in the ovirt engine to begin with as console access to actually configure a VM to make templates of seems a pretty basic tenant of virtualisation. Anyway, I am following the guide http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and trying to download spice.cab to follow the rather long procedure to install, however the link on that page gives a 404 page not found error. Could someone point me to the actual download? Is this document perhaps outdated and I am following the wrong path? Thanks Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console spice questions
Thanks David, I appreciate the help. I installed virt-manager on my virt-engine. And I have installed virt-viewer on my workstation... I am still not getting a console though. I don't quite understand if I have to do anything further.. I have checked the faq and looked at the screen shots, but I am not much the wiser... is there any more detail I can read on installing and getting this running? I am assuming I connect to virt-engine for this - should the console button in the virt-engine bring up the remote viewer, or do I have to start the remote view separately? I turned the firewall off to make sure that isn't the problem. It appears its trying fire virt-manager up on to a remote x display I guess, but I just get unable to connect to the graphic server spice://ovirt.pbi.global.pvt:5900 Any further advice on getting this running would be greatly appreciated. Bill -Original Message- From: David Jaša [mailto:dj...@redhat.com] Sent: 19 September 2014 09:05 To: Bill Dossett Cc: users@ovirt.org Subject: Re: [ovirt-users] console spice questions Hi Bill, Yes, the document is already dated. Lately, you don't have to go through the hoops needed to make spice-x work. Even if you can get it, it will only work for you in IE 11. You should instead just install virt-viewer [1] and the consoles should Just Work for you using the Natice Client (.vv file) method. David [1] http://virt-manager.org/download/ On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote: Hi After setting up an ovirt cluster with 4 hosts and getting my networking and vlans all connected I’m pretty impressed with ovirt. I am however not too impressed with trying to actually get a console into a VM. I’m not sure why this isn’t included in the ovirt engine to begin with as console access to actually configure a VM to make templates of seems a pretty basic tenant of virtualisation. Anyway, I am following the guide http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and trying to download spice.cab to follow the rather long procedure to install, however the link on that page gives a 404 page not found error. Could someone point me to the actual download? Is this document perhaps outdated and I am following the wrong path? Thanks Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com www.pb.com In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less than a minute ManageIQ User Guide available [HERE] Check out the ManageIQ Blog for recent enhancements and information [HERE] __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
Sorry for delay in replying on this, I got pulled into some urgent meetings at the end of the day. Regarding the questions below, Yes under the H/W tab my QLogic cards are listed. Looks like I have two different models of cards, which could be, I think I acquired them off ebay and then got another one later for redundancy. WWNN and WWPNs are listed. Miultipath -ll lists all my LUNs, multipathing is set to RR... not sure if that could be problem as the SAN I am using (old EMC/DGC CX200) is active passive and I would assume it would be MRU... Hope this helps, still no LUNs showing up in my Engine. Thanks again for your help. Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 13:06 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Inciden t /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%2 0 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx * On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep
Re: [ovirt-users] Fwd: RE: FC QLogic question
Hi, Sorry, I got waylaid at the end of yesterday - catching up... (sorry for length of thread now as well, but would like to get to the bottom of this) Have seen posts about ovirt-node... I personally like the idea and hope that it continues to develop. Having to load a Linux distro up and then put ovirt hypervisor on it is more work and then you need to worry about upgrading the linux distro and ovirt and suddenly ovirt doesn't run on the distro you have and you start over. IMHO anyway. All of the LUN names are listed in /dev/mapper /etc/multipath.conf is thus # RHEV REVISION 1.0 defaults { polling_interval5 getuid_callout /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n no_path_retry fail user_friendly_names no flush_on_last_del yes fast_io_fail_tmo5 dev_loss_tmo30 max_fds 4096 } devices { device { vendor HITACHI product DF.* getuid_callout /sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/%n } device { vendor COMPELNT product Compellent Vol no_path_retry fail } } But on the multipath -ll round robin is enabled... I can't see how the firmware missing can be a problem if all my disks are appearing on node. Some cards don't need to be flashed, they can be if needed but if my LUNs are appearing, then I assume it is working. Sorry, I am very new to node and not much experience with FC under Linux, so trying to get up to speed on commands... Which ovirt am Iusing? Not sure what you want back, uname -a yields 2.6.32-431.3.1.el6.x86_6 The iso I used is ovirt-node-iso-3.4-20140423.0.el6.iso from the releases/stable/iso folder - I am fairly sure, there are two ISOs there. Unfortunately I am not in the office today and can't get to the desktop where I burned the ISOs from... Thanks Bill -Original Message- From: Fabian Deutsch [mailto:fdeut...@redhat.com] Sent: 11 September 2014 13:40 To: Daniel Helgenberger; Bill Dossett Cc: users@ovirt.org Subject: Re: [ovirt-users] Fwd: RE: FC QLogic question - Original Message - On 11.09.2014 14:23, Fabian Deutsch wrote: Hey Daniel, - Original Message - On 11.09.2014 14:09, Fabian Deutsch wrote: Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. Hello Fabian, indeed this was my mistake; while typing the mail I was reading on the spice website - so qla is the correct module of course! I already replied this to Bill but forgot to cc the list also ... Also, for the node iso it would make little sense to have the qlx module loaded. For completeness, I attach my answer to Bill. Thanks :) So to summarize: The adapter is recognized on Node? But it does not show up in Engine? Bill has to tell, but I think so. I suggested to him this might be Ah, I mixed you an Bill up in the thread. because of dm-multipath, multipath.conf might blacklist here. My nodes are plain EL6 and I have multipath enabled - but I do not know if ovirt-node filters for dm-mp devnodes only by default (this would make sense because of iscsi-multipathing in ovirt 3.4). Well, we did some multipath changes lately. Let#s see what Bill says: Bill, what node are you using? What does multipath -l say? How does /dev/mapper/* and /dev/multipath.conf look like? And is the disk appearing on Node and/or Engine? Thanks! fabian Maybe you can help out on this topic? Thanks! Thanks - fabian I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain
Re: [ovirt-users] Fwd: RE: FC QLogic question
Hmmm… I’ve just gone to add a storage domain and in the admin portal and bingo bango, all my LUNs appeared. Just wiping out everything from my last lab now. Thanks everyone, I am not quite sure why it started working, but knowing that the ovirt-node was seeing the LUNs prompted me to continue. Thanks all for the help. Bill From: sander.grendel...@gmail.com [mailto:sander.grendel...@gmail.com] On Behalf Of Sander Grendelman Sent: 12 September 2014 08:28 To: Bill Dossett Cc: users@ovirt.org Subject: Re: [ovirt-users] Fwd: RE: FC QLogic question This could also be an selinux issue with FC on the node, I've hit that one before. Especially since the luns do show up with multipath -ll Could be as simple as flipping a sanlock related selinux boolean. A quick test would be to boot in permissive mode. See http://www.ovirt.org/Node_Troubleshooting#SELinux for some more information. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fwd: RE: FC QLogic question
Bugger, spoke to soon…. One host sees the LUNs the other doesn’t. Same builds of ovirt-node. Both dell 2950s, and both qlogic cards… but one says Sep 9 08:12:23 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. And further down the log this (this one does not find the LUNS) Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-d001:1: Firmware dump saved to temp buffer (1/c90013d9e000). Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-101e:1: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-00af:1: Performing ISP error recovery - ha=88086ce53000. Sep 9 08:12:24 localhost kernel: qla2xxx :0c:00.0: firmware: requesting ql2400_fw.bin Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-0063:1: Failed to load firmware image (ql2400_fw.bin). Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-0090:1: Fimware image unavailable. Sep 9 08:12:24 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:12:24 localhost firmware.sh[4794]: Cannot find firmware file 'ql2400_fw.bin' Sep 9 08:12:26 localhost kernel: qla2xxx [:0c:00.0]-505f:1: Link is operational (4 Gbps). Sep 9 08:12:26 localhost kernel: qla2xxx [:0c:00.0]-1020:1: Failed mbx[0]=69, mb[1]=0, mb[2]=0, mb[3]=0, cmd=69 . Sep 9 08:12:32 localhost kdump: mkdumprd: failed to make kdump initrd Sep 9 08:12:32 localhost lldpad: config file failed to load, And the one that does find the LUNS is Sep 11 08:33:39 localhost kernel: qla2xxx [:0a:00.0]-00fb:0: QLogic QLE2460 - SG-(X)PCIE1FC-QF4, Sun StorageTek 4 Gb FC Enterprise PCI-Express Single Channel. And a little further down it discovers the LUNs Sep 11 08:33:39 localhost kernel: qla2xxx [:0e:00.0]-505f:1: Link is operational (4 Gbps). Sep 11 08:33:39 localhost kernel: scsi 1:0:0:0: Direct-Access DGC LUNZ 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:1: Direct-Access DGC RAID 5 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:2: Direct-Access DGC RAID 5 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:3: Direct-Access DGC RAID 5 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:5: Direct-Access DGC RAID 5 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:11: Direct-Access DGC RAID 1 0216 PQ: 0 ANSI: 4 Sep 11 08:33:39 localhost kernel: scsi 1:0:0:51: Direct-Access DGC RAID 1 0216 PQ: 0 ANSI: 4 So, I am thinking maybe different firmware levels on these cards and the first one for IBM systems has different firmware? As it seems to be throwing more errors. Should I try to add the firmware? And if so I know it goes in /lib/firmware but then the boot image needs to be updated I think and I don’t know how to do that… or am I barking up the wrong tree. Thanks again for the help. From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 12 September 2014 08:35 To: Sander Grendelman Cc: users@ovirt.org Subject: Re: [ovirt-users] Fwd: RE: FC QLogic question Hmmm… I’ve just gone to add a storage domain and in the admin portal and bingo bango, all my LUNs appeared. Just wiping out everything from my last lab now. Thanks everyone, I am not quite sure why it started working, but knowing that the ovirt-node was seeing the LUNs prompted me to continue. Thanks all for the help. Bill From: sander.grendel...@gmail.commailto:sander.grendel...@gmail.com [mailto:sander.grendel...@gmail.com] On Behalf Of Sander Grendelman Sent: 12 September 2014 08:28 To: Bill Dossett Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Fwd: RE: FC QLogic question This could also be an selinux issue with FC on the node, I've hit that one before. Especially since the luns do show up with multipath -ll Could be as simple as flipping a sanlock related selinux boolean. A quick test would be to boot in permissive mode. See http://www.ovirt.org/Node_Troubleshooting#SELinux for some more information. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] FC QLogic question
Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
Thanks for responding Daniel. I was wondering and thought the message may be irrelevant. But yes, it doesn’t appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something…) on two hosts now and neither are working. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured… on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.demailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don’t. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex – if I need to do this, does anyone know of a nice and easy howto guide on this. I’m just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.dehttp://www.m-box.de www.monkeymen.tvhttp://www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
I'm guessing my problems are to do with using the ovirt node hypervisor install from the ovirt web site to boot and configure from. I'm going to download CentOS 6.5 and setup that up and then put ovirt on top of it. I have used CentOS on these systems before and they were fine using the FC SAN. I get the feeling that NFS and iSCSI support is probably fine, but I the FC support may not be so good, well that's my guess anyway. Thanks again From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 11 September 2014 11:17 To: Daniel Helgenberger Cc: users@ovirt.org Subject: Re: [ovirt-users] FC QLogic question Thanks for responding Daniel. I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.demailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.dehttp://www.m-box.de www.monkeymen.tvhttp://www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767
[ovirt-users] Fwd: FC QLogic question
Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something.) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured. on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid ent/newIncident.aspx]takes less than a minute
[ovirt-users] Question on network and boding I think!
Hi - I am a complete newb at Ovirt, but have setup my Ovirt manager and a host and connected them together. I am basically looking to replicate in my lab with Ovirt what a simple VMware installation is doing. I would like a single network or in vmware terms a vswitch, with two network cards in the node, both connected to trunked ports so that I can create port groups with different vlans, one for management, and one for VMs and possibly a DMZ vlan. I have tried bonding the network interfaces, but there is also a bridge option and I don't know what that does. I have read the ovirt docs on bonded interfaces and they are a little bit terse to actually get me started on this. If there is a better guide, or simple explanation to get me over this hurdle I would appreciate it. Sorry for all the vmware terms as well, but I have worked with vmware for many years and it's the only virtual environment I know really well - but with their pricing models, I really need to start looking around now! Thanks very much! Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Question on network and boding I think!
Hi, thanks for the response.. I have only worked with the GUI on the host so far, but I am will watch this and also the previous posters pointer - I will obviously have to start working with the hosts and config files sooner or later and I have worked with Linux for many years, so should be too hard to get rolling, thanks again. -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: 10 September 2014 11:40 To: Bill Dossett; users@ovirt.org Subject: Re: [ovirt-users] Question on network and boding I think! On 09/10/2014 01:23 PM, Bill Dossett wrote: Hi - I am a complete newb at Ovirt, but have setup my Ovirt manager and a host and connected them together. I am basically looking to replicate in my lab with Ovirt what a simple VMware installation is doing. I would like a single network or in vmware terms a vswitch, with two network cards in the node, both connected to trunked ports so that I can create port groups with different vlans, one for management, and one for VMs and possibly a DMZ vlan. I have tried bonding the network interfaces, but there is also a bridge option and I don't know what that does. I have read the ovirt docs on bonded interfaces and they are a little bit terse to actually get me started on this. bonding them where? from the hosts or from the gui? https://www.youtube.com/watch?v=3EMrqQR-f3w (around 1:30 minutes from start) If there is a better guide, or simple explanation to get me over this hurdle I would appreciate it. Sorry for all the vmware terms as well, but I have worked with vmware for many years and it's the only virtual environment I know really well - but with their pricing models, I really need to start looking around now! Thanks very much! *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users