Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Hi, It was indeed NetApp, and as you say I can remember something like it but I'm not 200% sure. For some host that I wasn't able to remove I needed hosted-engine --reinitialize-lockspace indeed, figured that out. dd over the same went well, didn't see anyone complaining about that either. Thanks Didi for upodating this post. 2016-07-24 8:12 GMT+02:00 Yedidyah Bar David : > On Thu, Jul 21, 2016 at 9:56 PM, Matt . wrote: >> OK, it seems that a snapshot was having the files but linux didn't saw >> a change between the images as the size was still the same. > > What kind of snapshot? > > AFAIR from old days with netapp, snapshots on netapp expose the same > inode. diff will see this and will not further look at the file, even if > everything else is different - size, timestamps etc. I guess it's still > the same today. > > To answer your question, you might be looking for 'hosted-engine > --reinitialize-lockspace'. But if you ask me, if the content was zeroed, > you have some serious issues there - either on the storage or on the > hosts. > >> >> I'm going to dd back :) > > Good luck. > > Note that dd and/or the shell might too refuse to copy over the "same" > file (same inode). > > Best, > >> >> 2016-07-21 20:04 GMT+02:00 Matt . : >>> OK, it seems that my config volume for the hosted engine is empty, I >>> cannot tar anything out of it and I'm quite sure it has been empty for >>> ever as I got some strange warning every time. >>> >>> Is there a way to recover that from files ? Backups/snapshots are empty >>> so... >>> >>> 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote: > The deploy went OK from the GUI but it's still not "active" as Hosted > engine Host. The install also wen very fast so it looked like it > didn't do anything witl the deploy setting in the GUI @ the hosted > engine tab. The difference with a standard host is just that it should create /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent and ovirt-ha-broker so it shouldn't be that longer. At the end, due to the issue with syncing the local maintenance mode from the engine, you have to connect to the host and run 'hosted-engine -set-maintenance --mode=none' from there. Can you please post the result of hosted-engine --vm-status and the status of ovirt-ha-agent? > Or should I re-deploy again on the commandline after adding the host > through the GUI ? > > About the initial GW, I didn't see that in the GUI. > > 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: >>> No problem I checked it out and applied it, no solution it seems. >> >> Do you mean that it's still referring to your initial gateway or that >> the deploy failed? >> >>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: > OK, I did a deploy from the engine and the Hosted is "Not Active" and Yes, sorry, I forgot to mention that. We have an open bug about re-activating an hosted-engine host from the engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 Connecting to the host and exiting the maintenance mode from there is the temporary solution. > Engine HA is empty on 4.0.1 > > 2016-07-21 11:58 GMT+02:00 Matt . : >> True, but you can up an IP on any device in that case because you >> know >> what you are doing. >> >> I think that this can be finetuned, or at least multiple IPs would be >> nice as I now need to add one IP from my vrrp setup, so if there is a >> failover or I need to take down the second switch I'm also done. >> >> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . >>> wrote: OK, I will check this laster on, as I was having issues with the deploy from the GUI before as nothing really happened, I thought it was a bug on the first 4.0 release ? I think this should be investigated, the whole deployment as it would be good to have the possibility to list some GW's in case you use failover. I was even thinking of setting the engine IP there, should be working as good as also. >>> >>> Not really since the agent is pinging also when the engine VM is >>> down >>> due to maintenance. >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:47 AM, Matt . > wrote: >> OK, I already thought that but where is this saved as I don't >> have any >> right
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 9:56 PM, Matt . wrote: > OK, it seems that a snapshot was having the files but linux didn't saw > a change between the images as the size was still the same. What kind of snapshot? AFAIR from old days with netapp, snapshots on netapp expose the same inode. diff will see this and will not further look at the file, even if everything else is different - size, timestamps etc. I guess it's still the same today. To answer your question, you might be looking for 'hosted-engine --reinitialize-lockspace'. But if you ask me, if the content was zeroed, you have some serious issues there - either on the storage or on the hosts. > > I'm going to dd back :) Good luck. Note that dd and/or the shell might too refuse to copy over the "same" file (same inode). Best, > > 2016-07-21 20:04 GMT+02:00 Matt . : >> OK, it seems that my config volume for the hosted engine is empty, I >> cannot tar anything out of it and I'm quite sure it has been empty for >> ever as I got some strange warning every time. >> >> Is there a way to recover that from files ? Backups/snapshots are empty so... >> >> 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote: The deploy went OK from the GUI but it's still not "active" as Hosted engine Host. The install also wen very fast so it looked like it didn't do anything witl the deploy setting in the GUI @ the hosted engine tab. >>> >>> The difference with a standard host is just that it should create >>> /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent >>> and ovirt-ha-broker so it shouldn't be that longer. >>> >>> At the end, due to the issue with syncing the local maintenance mode >>> from the engine, you have to connect to the host and run >>> 'hosted-engine -set-maintenance --mode=none' from there. >>> >>> Can you please post the result of >>> hosted-engine --vm-status and the status of ovirt-ha-agent? >>> Or should I re-deploy again on the commandline after adding the host through the GUI ? About the initial GW, I didn't see that in the GUI. 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: >> No problem I checked it out and applied it, no solution it seems. > > Do you mean that it's still referring to your initial gateway or that > the deploy failed? > >> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: OK, I did a deploy from the engine and the Hosted is "Not Active" and >>> >>> Yes, sorry, I forgot to mention that. >>> We have an open bug about re-activating an hosted-engine host from the >>> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >>> Connecting to the host and exiting the maintenance mode from there is >>> the temporary solution. >>> Engine HA is empty on 4.0.1 2016-07-21 11:58 GMT+02:00 Matt . : > True, but you can up an IP on any device in that case because you know > what you are doing. > > I think that this can be finetuned, or at least multiple IPs would be > nice as I now need to add one IP from my vrrp setup, so if there is a > failover or I need to take down the second switch I'm also done. > > 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 10:03 AM, Matt . >> wrote: >>> OK, I will check this laster on, as I was having issues with the >>> deploy from the GUI before as nothing really happened, I thought it >>> was a bug on the first 4.0 release ? >>> >>> I think this should be investigated, the whole deployment as it >>> would >>> be good to have the possibility to list some GW's in case you use >>> failover. >>> >>> I was even thinking of setting the engine IP there, should be >>> working >>> as good as also. >> >> Not really since the agent is pinging also when the engine VM is down >> due to maintenance. >> >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: > OK, I already thought that but where is this saved as I don't > have any > rights as root to the ha_agent folder on the HE storage ? It's not a folder: it's a tar file directly saved over a VDSM volume. Editing it's a bit tricky. > In worst case scenario, how would i be able to deploy a new hosted > engine from a hosted engine ? This sounds undoable to me and also > unwanted as the HE is OK so far. With a 4.0 engine, when you choose to deploy a new host from the webadmin or fro
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, it seems that a snapshot was having the files but linux didn't saw a change between the images as the size was still the same. I'm going to dd back :) 2016-07-21 20:04 GMT+02:00 Matt . : > OK, it seems that my config volume for the hosted engine is empty, I > cannot tar anything out of it and I'm quite sure it has been empty for > ever as I got some strange warning every time. > > Is there a way to recover that from files ? Backups/snapshots are empty so... > > 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote: >>> The deploy went OK from the GUI but it's still not "active" as Hosted >>> engine Host. The install also wen very fast so it looked like it >>> didn't do anything witl the deploy setting in the GUI @ the hosted >>> engine tab. >> >> The difference with a standard host is just that it should create >> /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent >> and ovirt-ha-broker so it shouldn't be that longer. >> >> At the end, due to the issue with syncing the local maintenance mode >> from the engine, you have to connect to the host and run >> 'hosted-engine -set-maintenance --mode=none' from there. >> >> Can you please post the result of >> hosted-engine --vm-status and the status of ovirt-ha-agent? >> >>> Or should I re-deploy again on the commandline after adding the host >>> through the GUI ? >>> >>> About the initial GW, I didn't see that in the GUI. >>> >>> 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: > No problem I checked it out and applied it, no solution it seems. Do you mean that it's still referring to your initial gateway or that the deploy failed? > 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: >>> OK, I did a deploy from the engine and the Hosted is "Not Active" and >> >> Yes, sorry, I forgot to mention that. >> We have an open bug about re-activating an hosted-engine host from the >> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >> Connecting to the host and exiting the maintenance mode from there is >> the temporary solution. >> >>> Engine HA is empty on 4.0.1 >>> >>> 2016-07-21 11:58 GMT+02:00 Matt . : True, but you can up an IP on any device in that case because you know what you are doing. I think that this can be finetuned, or at least multiple IPs would be nice as I now need to add one IP from my vrrp setup, so if there is a failover or I need to take down the second switch I'm also done. 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 10:03 AM, Matt . > wrote: >> OK, I will check this laster on, as I was having issues with the >> deploy from the GUI before as nothing really happened, I thought it >> was a bug on the first 4.0 release ? >> >> I think this should be investigated, the whole deployment as it would >> be good to have the possibility to list some GW's in case you use >> failover. >> >> I was even thinking of setting the engine IP there, should be working >> as good as also. > > Not really since the agent is pinging also when the engine VM is down > due to maintenance. > >> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . >>> wrote: OK, I already thought that but where is this saved as I don't have any rights as root to the ha_agent folder on the HE storage ? >>> >>> It's not a folder: it's a tar file directly saved over a VDSM >>> volume. >>> Editing it's a bit tricky. >>> In worst case scenario, how would i be able to deploy a new hosted engine from a hosted engine ? This sounds undoable to me and also unwanted as the HE is OK so far. >>> >>> With a 4.0 engine, when you choose to deploy a new host from the >>> webadmin or from the rest API you can also choose to deploy it as an >>> hosted-engine host if the engine has been deployed with >>> hosted-engine. >>> In this case, if I'm not wrong, you can also specify a different >>> gateway value. >>> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:27 AM, Matt . > wrote: >> Even when I change that on each host before I do a new deploy it >> still >> uses the old GW address. > > If you deploy additional hosts with the CLI utility, each new host > will be deployed consuming the answerfile generated by the first > host >
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, it seems that my config volume for the hosted engine is empty, I cannot tar anything out of it and I'm quite sure it has been empty for ever as I got some strange warning every time. Is there a way to recover that from files ? Backups/snapshots are empty so... 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote: >> The deploy went OK from the GUI but it's still not "active" as Hosted >> engine Host. The install also wen very fast so it looked like it >> didn't do anything witl the deploy setting in the GUI @ the hosted >> engine tab. > > The difference with a standard host is just that it should create > /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent > and ovirt-ha-broker so it shouldn't be that longer. > > At the end, due to the issue with syncing the local maintenance mode > from the engine, you have to connect to the host and run > 'hosted-engine -set-maintenance --mode=none' from there. > > Can you please post the result of > hosted-engine --vm-status and the status of ovirt-ha-agent? > >> Or should I re-deploy again on the commandline after adding the host >> through the GUI ? >> >> About the initial GW, I didn't see that in the GUI. >> >> 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: No problem I checked it out and applied it, no solution it seems. >>> >>> Do you mean that it's still referring to your initial gateway or that >>> the deploy failed? >>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: >> OK, I did a deploy from the engine and the Hosted is "Not Active" and > > Yes, sorry, I forgot to mention that. > We have an open bug about re-activating an hosted-engine host from the > engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 > Connecting to the host and exiting the maintenance mode from there is > the temporary solution. > >> Engine HA is empty on 4.0.1 >> >> 2016-07-21 11:58 GMT+02:00 Matt . : >>> True, but you can up an IP on any device in that case because you know >>> what you are doing. >>> >>> I think that this can be finetuned, or at least multiple IPs would be >>> nice as I now need to add one IP from my vrrp setup, so if there is a >>> failover or I need to take down the second switch I'm also done. >>> >>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: > OK, I will check this laster on, as I was having issues with the > deploy from the GUI before as nothing really happened, I thought it > was a bug on the first 4.0 release ? > > I think this should be investigated, the whole deployment as it would > be good to have the possibility to list some GW's in case you use > failover. > > I was even thinking of setting the engine IP there, should be working > as good as also. Not really since the agent is pinging also when the engine VM is down due to maintenance. > 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:47 AM, Matt . >> wrote: >>> OK, I already thought that but where is this saved as I don't have >>> any >>> rights as root to the ha_agent folder on the HE storage ? >> >> It's not a folder: it's a tar file directly saved over a VDSM volume. >> Editing it's a bit tricky. >> >>> In worst case scenario, how would i be able to deploy a new hosted >>> engine from a hosted engine ? This sounds undoable to me and also >>> unwanted as the HE is OK so far. >> >> With a 4.0 engine, when you choose to deploy a new host from the >> webadmin or from the rest API you can also choose to deploy it as an >> hosted-engine host if the engine has been deployed with >> hosted-engine. >> In this case, if I'm not wrong, you can also specify a different >> gateway value. >> >> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: > Even when I change that on each host before I do a new deploy it > still > uses the old GW address. If you deploy additional hosts with the CLI utility, each new host will be deployed consuming the answerfile generated by the first host and saved on the shared storage. You have to manually tweak there if you to avoid. Another smarted option is to deploy additional HE host from the webadmin interface. > 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >>>
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 12:38 PM, Matt . wrote: > The deploy went OK from the GUI but it's still not "active" as Hosted > engine Host. The install also wen very fast so it looked like it > didn't do anything witl the deploy setting in the GUI @ the hosted > engine tab. The difference with a standard host is just that it should create /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent and ovirt-ha-broker so it shouldn't be that longer. At the end, due to the issue with syncing the local maintenance mode from the engine, you have to connect to the host and run 'hosted-engine -set-maintenance --mode=none' from there. Can you please post the result of hosted-engine --vm-status and the status of ovirt-ha-agent? > Or should I re-deploy again on the commandline after adding the host > through the GUI ? > > About the initial GW, I didn't see that in the GUI. > > 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: >>> No problem I checked it out and applied it, no solution it seems. >> >> Do you mean that it's still referring to your initial gateway or that >> the deploy failed? >> >>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: > OK, I did a deploy from the engine and the Hosted is "Not Active" and Yes, sorry, I forgot to mention that. We have an open bug about re-activating an hosted-engine host from the engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 Connecting to the host and exiting the maintenance mode from there is the temporary solution. > Engine HA is empty on 4.0.1 > > 2016-07-21 11:58 GMT+02:00 Matt . : >> True, but you can up an IP on any device in that case because you know >> what you are doing. >> >> I think that this can be finetuned, or at least multiple IPs would be >> nice as I now need to add one IP from my vrrp setup, so if there is a >> failover or I need to take down the second switch I'm also done. >> >> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: OK, I will check this laster on, as I was having issues with the deploy from the GUI before as nothing really happened, I thought it was a bug on the first 4.0 release ? I think this should be investigated, the whole deployment as it would be good to have the possibility to list some GW's in case you use failover. I was even thinking of setting the engine IP there, should be working as good as also. >>> >>> Not really since the agent is pinging also when the engine VM is down >>> due to maintenance. >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:47 AM, Matt . > wrote: >> OK, I already thought that but where is this saved as I don't have >> any >> rights as root to the ha_agent folder on the HE storage ? > > It's not a folder: it's a tar file directly saved over a VDSM volume. > Editing it's a bit tricky. > >> In worst case scenario, how would i be able to deploy a new hosted >> engine from a hosted engine ? This sounds undoable to me and also >> unwanted as the HE is OK so far. > > With a 4.0 engine, when you choose to deploy a new host from the > webadmin or from the rest API you can also choose to deploy it as an > hosted-engine host if the engine has been deployed with hosted-engine. > In this case, if I'm not wrong, you can also specify a different > gateway value. > > >> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . >>> wrote: Even when I change that on each host before I do a new deploy it still uses the old GW address. >>> >>> If you deploy additional hosts with the CLI utility, each new host >>> will be deployed consuming the answerfile generated by the first >>> host >>> and saved on the shared storage. >>> You have to manually tweak there if you to avoid. >>> >>> Another smarted option is to deploy additional HE host from the >>> webadmin interface. >>> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : > On Wed, Jul 20, 2016 at 11:57 PM, Matt . > wrote: >> OK, I tried to edit the answerfiles on the other hosts to use >> another >> IP but it doesn't ping and still uses the old GW address. >> >> Any idea ? > > The gateway address is saved under > /etc/ovirt-hosted-engine/hosted-engine.conf > on each host. >>
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
The deploy went OK from the GUI but it's still not "active" as Hosted engine Host. The install also wen very fast so it looked like it didn't do anything witl the deploy setting in the GUI @ the hosted engine tab. Or should I re-deploy again on the commandline after adding the host through the GUI ? About the initial GW, I didn't see that in the GUI. 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: >> No problem I checked it out and applied it, no solution it seems. > > Do you mean that it's still referring to your initial gateway or that > the deploy failed? > >> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: OK, I did a deploy from the engine and the Hosted is "Not Active" and >>> >>> Yes, sorry, I forgot to mention that. >>> We have an open bug about re-activating an hosted-engine host from the >>> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >>> Connecting to the host and exiting the maintenance mode from there is >>> the temporary solution. >>> Engine HA is empty on 4.0.1 2016-07-21 11:58 GMT+02:00 Matt . : > True, but you can up an IP on any device in that case because you know > what you are doing. > > I think that this can be finetuned, or at least multiple IPs would be > nice as I now need to add one IP from my vrrp setup, so if there is a > failover or I need to take down the second switch I'm also done. > > 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: >>> OK, I will check this laster on, as I was having issues with the >>> deploy from the GUI before as nothing really happened, I thought it >>> was a bug on the first 4.0 release ? >>> >>> I think this should be investigated, the whole deployment as it would >>> be good to have the possibility to list some GW's in case you use >>> failover. >>> >>> I was even thinking of setting the engine IP there, should be working >>> as good as also. >> >> Not really since the agent is pinging also when the engine VM is down >> due to maintenance. >> >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: > OK, I already thought that but where is this saved as I don't have any > rights as root to the ha_agent folder on the HE storage ? It's not a folder: it's a tar file directly saved over a VDSM volume. Editing it's a bit tricky. > In worst case scenario, how would i be able to deploy a new hosted > engine from a hosted engine ? This sounds undoable to me and also > unwanted as the HE is OK so far. With a 4.0 engine, when you choose to deploy a new host from the webadmin or from the rest API you can also choose to deploy it as an hosted-engine host if the engine has been deployed with hosted-engine. In this case, if I'm not wrong, you can also specify a different gateway value. > 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:27 AM, Matt . >> wrote: >>> Even when I change that on each host before I do a new deploy it >>> still >>> uses the old GW address. >> >> If you deploy additional hosts with the CLI utility, each new host >> will be deployed consuming the answerfile generated by the first host >> and saved on the shared storage. >> You have to manually tweak there if you to avoid. >> >> Another smarted option is to deploy additional HE host from the >> webadmin interface. >> >> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: > OK, I tried to edit the answerfiles on the other hosts to use > another > IP but it doesn't ping and still uses the old GW address. > > Any idea ? The gateway address is saved under /etc/ovirt-hosted-engine/hosted-engine.conf on each host. > 2016-07-20 22:27 GMT+02:00 Matt . : >> Maybe it's a good idea to be able to add multiple addresses it >> should >> ping in order of response. >> >> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola >> : >>> Il 20/Lug/2016 10:06 PM, "Matt ." ha >>> scritto: Hi, I'm trying to add a host to a HE installation but my gateway is not pingable. It's a floating IP which is usable but not pingable in this case. >
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 12:28 PM, Matt . wrote: > No problem I checked it out and applied it, no solution it seems. Do you mean that it's still referring to your initial gateway or that the deploy failed? > 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: >>> OK, I did a deploy from the engine and the Hosted is "Not Active" and >> >> Yes, sorry, I forgot to mention that. >> We have an open bug about re-activating an hosted-engine host from the >> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >> Connecting to the host and exiting the maintenance mode from there is >> the temporary solution. >> >>> Engine HA is empty on 4.0.1 >>> >>> 2016-07-21 11:58 GMT+02:00 Matt . : True, but you can up an IP on any device in that case because you know what you are doing. I think that this can be finetuned, or at least multiple IPs would be nice as I now need to add one IP from my vrrp setup, so if there is a failover or I need to take down the second switch I'm also done. 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: >> OK, I will check this laster on, as I was having issues with the >> deploy from the GUI before as nothing really happened, I thought it >> was a bug on the first 4.0 release ? >> >> I think this should be investigated, the whole deployment as it would >> be good to have the possibility to list some GW's in case you use >> failover. >> >> I was even thinking of setting the engine IP there, should be working >> as good as also. > > Not really since the agent is pinging also when the engine VM is down > due to maintenance. > >> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: OK, I already thought that but where is this saved as I don't have any rights as root to the ha_agent folder on the HE storage ? >>> >>> It's not a folder: it's a tar file directly saved over a VDSM volume. >>> Editing it's a bit tricky. >>> In worst case scenario, how would i be able to deploy a new hosted engine from a hosted engine ? This sounds undoable to me and also unwanted as the HE is OK so far. >>> >>> With a 4.0 engine, when you choose to deploy a new host from the >>> webadmin or from the rest API you can also choose to deploy it as an >>> hosted-engine host if the engine has been deployed with hosted-engine. >>> In this case, if I'm not wrong, you can also specify a different >>> gateway value. >>> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:27 AM, Matt . > wrote: >> Even when I change that on each host before I do a new deploy it >> still >> uses the old GW address. > > If you deploy additional hosts with the CLI utility, each new host > will be deployed consuming the answerfile generated by the first host > and saved on the shared storage. > You have to manually tweak there if you to avoid. > > Another smarted option is to deploy additional HE host from the > webadmin interface. > > >> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . >>> wrote: OK, I tried to edit the answerfiles on the other hosts to use another IP but it doesn't ping and still uses the old GW address. Any idea ? >>> >>> The gateway address is saved under >>> /etc/ovirt-hosted-engine/hosted-engine.conf >>> on each host. >>> 2016-07-20 22:27 GMT+02:00 Matt . : > Maybe it's a good idea to be able to add multiple addresses it > should > ping in order of response. > > 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >> Il 20/Lug/2016 10:06 PM, "Matt ." ha >> scritto: >>> >>> Hi, >>> >>> I'm trying to add a host to a HE installation but my gateway is >>> not >>> pingable. It's a floating IP which is usable but not pingable >>> in this >>> case. >>> >>> During the first install of the HE I could give any IP to ping >>> and I >>> used a source IP for the floating GW address. >>> >>> What can I do to get around this as the network is OK, even >>> when the >>> GW is not pingable. >> >> I think that gw not pingable will be interpreted as network >> failure by the >> agent and will lower the score of the hosts. >> >>>
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
No problem I checked it out and applied it, no solution it seems. 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: >> OK, I did a deploy from the engine and the Hosted is "Not Active" and > > Yes, sorry, I forgot to mention that. > We have an open bug about re-activating an hosted-engine host from the > engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 > Connecting to the host and exiting the maintenance mode from there is > the temporary solution. > >> Engine HA is empty on 4.0.1 >> >> 2016-07-21 11:58 GMT+02:00 Matt . : >>> True, but you can up an IP on any device in that case because you know >>> what you are doing. >>> >>> I think that this can be finetuned, or at least multiple IPs would be >>> nice as I now need to add one IP from my vrrp setup, so if there is a >>> failover or I need to take down the second switch I'm also done. >>> >>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: > OK, I will check this laster on, as I was having issues with the > deploy from the GUI before as nothing really happened, I thought it > was a bug on the first 4.0 release ? > > I think this should be investigated, the whole deployment as it would > be good to have the possibility to list some GW's in case you use > failover. > > I was even thinking of setting the engine IP there, should be working > as good as also. Not really since the agent is pinging also when the engine VM is down due to maintenance. > 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: >>> OK, I already thought that but where is this saved as I don't have any >>> rights as root to the ha_agent folder on the HE storage ? >> >> It's not a folder: it's a tar file directly saved over a VDSM volume. >> Editing it's a bit tricky. >> >>> In worst case scenario, how would i be able to deploy a new hosted >>> engine from a hosted engine ? This sounds undoable to me and also >>> unwanted as the HE is OK so far. >> >> With a 4.0 engine, when you choose to deploy a new host from the >> webadmin or from the rest API you can also choose to deploy it as an >> hosted-engine host if the engine has been deployed with hosted-engine. >> In this case, if I'm not wrong, you can also specify a different gateway >> value. >> >> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: > Even when I change that on each host before I do a new deploy it still > uses the old GW address. If you deploy additional hosts with the CLI utility, each new host will be deployed consuming the answerfile generated by the first host and saved on the shared storage. You have to manually tweak there if you to avoid. Another smarted option is to deploy additional HE host from the webadmin interface. > 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >> On Wed, Jul 20, 2016 at 11:57 PM, Matt . >> wrote: >>> OK, I tried to edit the answerfiles on the other hosts to use >>> another >>> IP but it doesn't ping and still uses the old GW address. >>> >>> Any idea ? >> >> The gateway address is saved under >> /etc/ovirt-hosted-engine/hosted-engine.conf >> on each host. >> >>> 2016-07-20 22:27 GMT+02:00 Matt . : Maybe it's a good idea to be able to add multiple addresses it should ping in order of response. 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : > Il 20/Lug/2016 10:06 PM, "Matt ." ha > scritto: >> >> Hi, >> >> I'm trying to add a host to a HE installation but my gateway is >> not >> pingable. It's a floating IP which is usable but not pingable in >> this >> case. >> >> During the first install of the HE I could give any IP to ping >> and I >> used a source IP for the floating GW address. >> >> What can I do to get around this as the network is OK, even when >> the >> GW is not pingable. > > I think that gw not pingable will be interpreted as network > failure by the > agent and will lower the score of the hosts. > >> >> Any idea is welcome! >> >> Thanks! >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users _
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 12:09 PM, Matt . wrote: > OK, I did a deploy from the engine and the Hosted is "Not Active" and Yes, sorry, I forgot to mention that. We have an open bug about re-activating an hosted-engine host from the engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 Connecting to the host and exiting the maintenance mode from there is the temporary solution. > Engine HA is empty on 4.0.1 > > 2016-07-21 11:58 GMT+02:00 Matt . : >> True, but you can up an IP on any device in that case because you know >> what you are doing. >> >> I think that this can be finetuned, or at least multiple IPs would be >> nice as I now need to add one IP from my vrrp setup, so if there is a >> failover or I need to take down the second switch I'm also done. >> >> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: OK, I will check this laster on, as I was having issues with the deploy from the GUI before as nothing really happened, I thought it was a bug on the first 4.0 release ? I think this should be investigated, the whole deployment as it would be good to have the possibility to list some GW's in case you use failover. I was even thinking of setting the engine IP there, should be working as good as also. >>> >>> Not really since the agent is pinging also when the engine VM is down >>> due to maintenance. >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: >> OK, I already thought that but where is this saved as I don't have any >> rights as root to the ha_agent folder on the HE storage ? > > It's not a folder: it's a tar file directly saved over a VDSM volume. > Editing it's a bit tricky. > >> In worst case scenario, how would i be able to deploy a new hosted >> engine from a hosted engine ? This sounds undoable to me and also >> unwanted as the HE is OK so far. > > With a 4.0 engine, when you choose to deploy a new host from the > webadmin or from the rest API you can also choose to deploy it as an > hosted-engine host if the engine has been deployed with hosted-engine. > In this case, if I'm not wrong, you can also specify a different gateway > value. > > >> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: Even when I change that on each host before I do a new deploy it still uses the old GW address. >>> >>> If you deploy additional hosts with the CLI utility, each new host >>> will be deployed consuming the answerfile generated by the first host >>> and saved on the shared storage. >>> You have to manually tweak there if you to avoid. >>> >>> Another smarted option is to deploy additional HE host from the >>> webadmin interface. >>> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : > On Wed, Jul 20, 2016 at 11:57 PM, Matt . > wrote: >> OK, I tried to edit the answerfiles on the other hosts to use another >> IP but it doesn't ping and still uses the old GW address. >> >> Any idea ? > > The gateway address is saved under > /etc/ovirt-hosted-engine/hosted-engine.conf > on each host. > >> 2016-07-20 22:27 GMT+02:00 Matt . : >>> Maybe it's a good idea to be able to add multiple addresses it >>> should >>> ping in order of response. >>> >>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: > > Hi, > > I'm trying to add a host to a HE installation but my gateway is > not > pingable. It's a floating IP which is usable but not pingable in > this > case. > > During the first install of the HE I could give any IP to ping > and I > used a source IP for the floating GW address. > > What can I do to get around this as the network is OK, even when > the > GW is not pingable. I think that gw not pingable will be interpreted as network failure by the agent and will lower the score of the hosts. > > Any idea is welcome! > > Thanks! > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, I did a deploy from the engine and the Hosted is "Not Active" and Engine HA is empty on 4.0.1 2016-07-21 11:58 GMT+02:00 Matt . : > True, but you can up an IP on any device in that case because you know > what you are doing. > > I think that this can be finetuned, or at least multiple IPs would be > nice as I now need to add one IP from my vrrp setup, so if there is a > failover or I need to take down the second switch I'm also done. > > 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: >>> OK, I will check this laster on, as I was having issues with the >>> deploy from the GUI before as nothing really happened, I thought it >>> was a bug on the first 4.0 release ? >>> >>> I think this should be investigated, the whole deployment as it would >>> be good to have the possibility to list some GW's in case you use >>> failover. >>> >>> I was even thinking of setting the engine IP there, should be working >>> as good as also. >> >> Not really since the agent is pinging also when the engine VM is down >> due to maintenance. >> >>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: > OK, I already thought that but where is this saved as I don't have any > rights as root to the ha_agent folder on the HE storage ? It's not a folder: it's a tar file directly saved over a VDSM volume. Editing it's a bit tricky. > In worst case scenario, how would i be able to deploy a new hosted > engine from a hosted engine ? This sounds undoable to me and also > unwanted as the HE is OK so far. With a 4.0 engine, when you choose to deploy a new host from the webadmin or from the rest API you can also choose to deploy it as an hosted-engine host if the engine has been deployed with hosted-engine. In this case, if I'm not wrong, you can also specify a different gateway value. > 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: >>> Even when I change that on each host before I do a new deploy it still >>> uses the old GW address. >> >> If you deploy additional hosts with the CLI utility, each new host >> will be deployed consuming the answerfile generated by the first host >> and saved on the shared storage. >> You have to manually tweak there if you to avoid. >> >> Another smarted option is to deploy additional HE host from the >> webadmin interface. >> >> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: > OK, I tried to edit the answerfiles on the other hosts to use another > IP but it doesn't ping and still uses the old GW address. > > Any idea ? The gateway address is saved under /etc/ovirt-hosted-engine/hosted-engine.conf on each host. > 2016-07-20 22:27 GMT+02:00 Matt . : >> Maybe it's a good idea to be able to add multiple addresses it should >> ping in order of response. >> >> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >>> Il 20/Lug/2016 10:06 PM, "Matt ." ha >>> scritto: Hi, I'm trying to add a host to a HE installation but my gateway is not pingable. It's a floating IP which is usable but not pingable in this case. During the first install of the HE I could give any IP to ping and I used a source IP for the floating GW address. What can I do to get around this as the network is OK, even when the GW is not pingable. >>> >>> I think that gw not pingable will be interpreted as network failure >>> by the >>> agent and will lower the score of the hosts. >>> Any idea is welcome! Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
True, but you can up an IP on any device in that case because you know what you are doing. I think that this can be finetuned, or at least multiple IPs would be nice as I now need to add one IP from my vrrp setup, so if there is a failover or I need to take down the second switch I'm also done. 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: >> OK, I will check this laster on, as I was having issues with the >> deploy from the GUI before as nothing really happened, I thought it >> was a bug on the first 4.0 release ? >> >> I think this should be investigated, the whole deployment as it would >> be good to have the possibility to list some GW's in case you use >> failover. >> >> I was even thinking of setting the engine IP there, should be working >> as good as also. > > Not really since the agent is pinging also when the engine VM is down > due to maintenance. > >> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: OK, I already thought that but where is this saved as I don't have any rights as root to the ha_agent folder on the HE storage ? >>> >>> It's not a folder: it's a tar file directly saved over a VDSM volume. >>> Editing it's a bit tricky. >>> In worst case scenario, how would i be able to deploy a new hosted engine from a hosted engine ? This sounds undoable to me and also unwanted as the HE is OK so far. >>> >>> With a 4.0 engine, when you choose to deploy a new host from the >>> webadmin or from the rest API you can also choose to deploy it as an >>> hosted-engine host if the engine has been deployed with hosted-engine. >>> In this case, if I'm not wrong, you can also specify a different gateway >>> value. >>> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: >> Even when I change that on each host before I do a new deploy it still >> uses the old GW address. > > If you deploy additional hosts with the CLI utility, each new host > will be deployed consuming the answerfile generated by the first host > and saved on the shared storage. > You have to manually tweak there if you to avoid. > > Another smarted option is to deploy additional HE host from the > webadmin interface. > > >> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: OK, I tried to edit the answerfiles on the other hosts to use another IP but it doesn't ping and still uses the old GW address. Any idea ? >>> >>> The gateway address is saved under >>> /etc/ovirt-hosted-engine/hosted-engine.conf >>> on each host. >>> 2016-07-20 22:27 GMT+02:00 Matt . : > Maybe it's a good idea to be able to add multiple addresses it should > ping in order of response. > > 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >> Il 20/Lug/2016 10:06 PM, "Matt ." ha >> scritto: >>> >>> Hi, >>> >>> I'm trying to add a host to a HE installation but my gateway is not >>> pingable. It's a floating IP which is usable but not pingable in >>> this >>> case. >>> >>> During the first install of the HE I could give any IP to ping and I >>> used a source IP for the floating GW address. >>> >>> What can I do to get around this as the network is OK, even when the >>> GW is not pingable. >> >> I think that gw not pingable will be interpreted as network failure >> by the >> agent and will lower the score of the hosts. >> >>> >>> Any idea is welcome! >>> >>> Thanks! >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 10:03 AM, Matt . wrote: > OK, I will check this laster on, as I was having issues with the > deploy from the GUI before as nothing really happened, I thought it > was a bug on the first 4.0 release ? > > I think this should be investigated, the whole deployment as it would > be good to have the possibility to list some GW's in case you use > failover. > > I was even thinking of setting the engine IP there, should be working > as good as also. Not really since the agent is pinging also when the engine VM is down due to maintenance. > 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: >>> OK, I already thought that but where is this saved as I don't have any >>> rights as root to the ha_agent folder on the HE storage ? >> >> It's not a folder: it's a tar file directly saved over a VDSM volume. >> Editing it's a bit tricky. >> >>> In worst case scenario, how would i be able to deploy a new hosted >>> engine from a hosted engine ? This sounds undoable to me and also >>> unwanted as the HE is OK so far. >> >> With a 4.0 engine, when you choose to deploy a new host from the >> webadmin or from the rest API you can also choose to deploy it as an >> hosted-engine host if the engine has been deployed with hosted-engine. >> In this case, if I'm not wrong, you can also specify a different gateway >> value. >> >> >>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: > Even when I change that on each host before I do a new deploy it still > uses the old GW address. If you deploy additional hosts with the CLI utility, each new host will be deployed consuming the answerfile generated by the first host and saved on the shared storage. You have to manually tweak there if you to avoid. Another smarted option is to deploy additional HE host from the webadmin interface. > 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >> On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: >>> OK, I tried to edit the answerfiles on the other hosts to use another >>> IP but it doesn't ping and still uses the old GW address. >>> >>> Any idea ? >> >> The gateway address is saved under >> /etc/ovirt-hosted-engine/hosted-engine.conf >> on each host. >> >>> 2016-07-20 22:27 GMT+02:00 Matt . : Maybe it's a good idea to be able to add multiple addresses it should ping in order of response. 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : > Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: >> >> Hi, >> >> I'm trying to add a host to a HE installation but my gateway is not >> pingable. It's a floating IP which is usable but not pingable in this >> case. >> >> During the first install of the HE I could give any IP to ping and I >> used a source IP for the floating GW address. >> >> What can I do to get around this as the network is OK, even when the >> GW is not pingable. > > I think that gw not pingable will be interpreted as network failure > by the > agent and will lower the score of the hosts. > >> >> Any idea is welcome! >> >> Thanks! >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, I will check this laster on, as I was having issues with the deploy from the GUI before as nothing really happened, I thought it was a bug on the first 4.0 release ? I think this should be investigated, the whole deployment as it would be good to have the possibility to list some GW's in case you use failover. I was even thinking of setting the engine IP there, should be working as good as also. 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: >> OK, I already thought that but where is this saved as I don't have any >> rights as root to the ha_agent folder on the HE storage ? > > It's not a folder: it's a tar file directly saved over a VDSM volume. > Editing it's a bit tricky. > >> In worst case scenario, how would i be able to deploy a new hosted >> engine from a hosted engine ? This sounds undoable to me and also >> unwanted as the HE is OK so far. > > With a 4.0 engine, when you choose to deploy a new host from the > webadmin or from the rest API you can also choose to deploy it as an > hosted-engine host if the engine has been deployed with hosted-engine. > In this case, if I'm not wrong, you can also specify a different gateway > value. > > >> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: Even when I change that on each host before I do a new deploy it still uses the old GW address. >>> >>> If you deploy additional hosts with the CLI utility, each new host >>> will be deployed consuming the answerfile generated by the first host >>> and saved on the shared storage. >>> You have to manually tweak there if you to avoid. >>> >>> Another smarted option is to deploy additional HE host from the >>> webadmin interface. >>> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : > On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: >> OK, I tried to edit the answerfiles on the other hosts to use another >> IP but it doesn't ping and still uses the old GW address. >> >> Any idea ? > > The gateway address is saved under > /etc/ovirt-hosted-engine/hosted-engine.conf > on each host. > >> 2016-07-20 22:27 GMT+02:00 Matt . : >>> Maybe it's a good idea to be able to add multiple addresses it should >>> ping in order of response. >>> >>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: > > Hi, > > I'm trying to add a host to a HE installation but my gateway is not > pingable. It's a floating IP which is usable but not pingable in this > case. > > During the first install of the HE I could give any IP to ping and I > used a source IP for the floating GW address. > > What can I do to get around this as the network is OK, even when the > GW is not pingable. I think that gw not pingable will be interpreted as network failure by the agent and will lower the score of the hosts. > > Any idea is welcome! > > Thanks! > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 9:47 AM, Matt . wrote: > OK, I already thought that but where is this saved as I don't have any > rights as root to the ha_agent folder on the HE storage ? It's not a folder: it's a tar file directly saved over a VDSM volume. Editing it's a bit tricky. > In worst case scenario, how would i be able to deploy a new hosted > engine from a hosted engine ? This sounds undoable to me and also > unwanted as the HE is OK so far. With a 4.0 engine, when you choose to deploy a new host from the webadmin or from the rest API you can also choose to deploy it as an hosted-engine host if the engine has been deployed with hosted-engine. In this case, if I'm not wrong, you can also specify a different gateway value. > 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : >> On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: >>> Even when I change that on each host before I do a new deploy it still >>> uses the old GW address. >> >> If you deploy additional hosts with the CLI utility, each new host >> will be deployed consuming the answerfile generated by the first host >> and saved on the shared storage. >> You have to manually tweak there if you to avoid. >> >> Another smarted option is to deploy additional HE host from the >> webadmin interface. >> >> >>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: > OK, I tried to edit the answerfiles on the other hosts to use another > IP but it doesn't ping and still uses the old GW address. > > Any idea ? The gateway address is saved under /etc/ovirt-hosted-engine/hosted-engine.conf on each host. > 2016-07-20 22:27 GMT+02:00 Matt . : >> Maybe it's a good idea to be able to add multiple addresses it should >> ping in order of response. >> >> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >>> Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: Hi, I'm trying to add a host to a HE installation but my gateway is not pingable. It's a floating IP which is usable but not pingable in this case. During the first install of the HE I could give any IP to ping and I used a source IP for the floating GW address. What can I do to get around this as the network is OK, even when the GW is not pingable. >>> >>> I think that gw not pingable will be interpreted as network failure by >>> the >>> agent and will lower the score of the hosts. >>> Any idea is welcome! Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, I already thought that but where is this saved as I don't have any rights as root to the ha_agent folder on the HE storage ? In worst case scenario, how would i be able to deploy a new hosted engine from a hosted engine ? This sounds undoable to me and also unwanted as the HE is OK so far. 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi : > On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: >> Even when I change that on each host before I do a new deploy it still >> uses the old GW address. > > If you deploy additional hosts with the CLI utility, each new host > will be deployed consuming the answerfile generated by the first host > and saved on the shared storage. > You have to manually tweak there if you to avoid. > > Another smarted option is to deploy additional HE host from the > webadmin interface. > > >> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: OK, I tried to edit the answerfiles on the other hosts to use another IP but it doesn't ping and still uses the old GW address. Any idea ? >>> >>> The gateway address is saved under >>> /etc/ovirt-hosted-engine/hosted-engine.conf >>> on each host. >>> 2016-07-20 22:27 GMT+02:00 Matt . : > Maybe it's a good idea to be able to add multiple addresses it should > ping in order of response. > > 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >> Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: >>> >>> Hi, >>> >>> I'm trying to add a host to a HE installation but my gateway is not >>> pingable. It's a floating IP which is usable but not pingable in this >>> case. >>> >>> During the first install of the HE I could give any IP to ping and I >>> used a source IP for the floating GW address. >>> >>> What can I do to get around this as the network is OK, even when the >>> GW is not pingable. >> >> I think that gw not pingable will be interpreted as network failure by >> the >> agent and will lower the score of the hosts. >> >>> >>> Any idea is welcome! >>> >>> Thanks! >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Thu, Jul 21, 2016 at 9:27 AM, Matt . wrote: > Even when I change that on each host before I do a new deploy it still > uses the old GW address. If you deploy additional hosts with the CLI utility, each new host will be deployed consuming the answerfile generated by the first host and saved on the shared storage. You have to manually tweak there if you to avoid. Another smarted option is to deploy additional HE host from the webadmin interface. > 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : >> On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: >>> OK, I tried to edit the answerfiles on the other hosts to use another >>> IP but it doesn't ping and still uses the old GW address. >>> >>> Any idea ? >> >> The gateway address is saved under >> /etc/ovirt-hosted-engine/hosted-engine.conf >> on each host. >> >>> 2016-07-20 22:27 GMT+02:00 Matt . : Maybe it's a good idea to be able to add multiple addresses it should ping in order of response. 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : > Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: >> >> Hi, >> >> I'm trying to add a host to a HE installation but my gateway is not >> pingable. It's a floating IP which is usable but not pingable in this >> case. >> >> During the first install of the HE I could give any IP to ping and I >> used a source IP for the floating GW address. >> >> What can I do to get around this as the network is OK, even when the >> GW is not pingable. > > I think that gw not pingable will be interpreted as network failure by the > agent and will lower the score of the hosts. > >> >> Any idea is welcome! >> >> Thanks! >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Even when I change that on each host before I do a new deploy it still uses the old GW address. 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi : > On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: >> OK, I tried to edit the answerfiles on the other hosts to use another >> IP but it doesn't ping and still uses the old GW address. >> >> Any idea ? > > The gateway address is saved under > /etc/ovirt-hosted-engine/hosted-engine.conf > on each host. > >> 2016-07-20 22:27 GMT+02:00 Matt . : >>> Maybe it's a good idea to be able to add multiple addresses it should >>> ping in order of response. >>> >>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: > > Hi, > > I'm trying to add a host to a HE installation but my gateway is not > pingable. It's a floating IP which is usable but not pingable in this > case. > > During the first install of the HE I could give any IP to ping and I > used a source IP for the floating GW address. > > What can I do to get around this as the network is OK, even when the > GW is not pingable. I think that gw not pingable will be interpreted as network failure by the agent and will lower the score of the hosts. > > Any idea is welcome! > > Thanks! > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Wed, Jul 20, 2016 at 11:57 PM, Matt . wrote: > OK, I tried to edit the answerfiles on the other hosts to use another > IP but it doesn't ping and still uses the old GW address. > > Any idea ? The gateway address is saved under /etc/ovirt-hosted-engine/hosted-engine.conf on each host. > 2016-07-20 22:27 GMT+02:00 Matt . : >> Maybe it's a good idea to be able to add multiple addresses it should >> ping in order of response. >> >> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >>> Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: Hi, I'm trying to add a host to a HE installation but my gateway is not pingable. It's a floating IP which is usable but not pingable in this case. During the first install of the HE I could give any IP to ping and I used a source IP for the floating GW address. What can I do to get around this as the network is OK, even when the GW is not pingable. >>> >>> I think that gw not pingable will be interpreted as network failure by the >>> agent and will lower the score of the hosts. >>> Any idea is welcome! Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
OK, I tried to edit the answerfiles on the other hosts to use another IP but it doesn't ping and still uses the old GW address. Any idea ? 2016-07-20 22:27 GMT+02:00 Matt . : > Maybe it's a good idea to be able to add multiple addresses it should > ping in order of response. > > 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : >> Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: >>> >>> Hi, >>> >>> I'm trying to add a host to a HE installation but my gateway is not >>> pingable. It's a floating IP which is usable but not pingable in this >>> case. >>> >>> During the first install of the HE I could give any IP to ping and I >>> used a source IP for the floating GW address. >>> >>> What can I do to get around this as the network is OK, even when the >>> GW is not pingable. >> >> I think that gw not pingable will be interpreted as network failure by the >> agent and will lower the score of the hosts. >> >>> >>> Any idea is welcome! >>> >>> Thanks! >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Maybe it's a good idea to be able to add multiple addresses it should ping in order of response. 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola : > Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: >> >> Hi, >> >> I'm trying to add a host to a HE installation but my gateway is not >> pingable. It's a floating IP which is usable but not pingable in this >> case. >> >> During the first install of the HE I could give any IP to ping and I >> used a source IP for the floating GW address. >> >> What can I do to get around this as the network is OK, even when the >> GW is not pingable. > > I think that gw not pingable will be interpreted as network failure by the > agent and will lower the score of the hosts. > >> >> Any idea is welcome! >> >> Thanks! >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Hi, Can I change that in some file ? on the HE storage ? 2016-07-20 22:09 GMT+02:00 Yedidyah Bar David : > On Wed, Jul 20, 2016 at 11:05 PM, Matt . wrote: >> Hi, >> >> I'm trying to add a host to a HE installation but my gateway is not >> pingable. It's a floating IP which is usable but not pingable in this >> case. >> >> During the first install of the HE I could give any IP to ping and I >> used a source IP for the floating GW address. >> >> What can I do to get around this as the network is OK, even when the >> GW is not pingable. >> >> Any idea is welcome! > > Just provide some other pingable IP address. > > HA uses this address to check if the network is ok. It does not mind if > it's really your router or not. > > Best, > -- > Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Il 20/Lug/2016 10:06 PM, "Matt ." ha scritto: > > Hi, > > I'm trying to add a host to a HE installation but my gateway is not > pingable. It's a floating IP which is usable but not pingable in this > case. > > During the first install of the HE I could give any IP to ping and I > used a source IP for the floating GW address. > > What can I do to get around this as the network is OK, even when the > GW is not pingable. I think that gw not pingable will be interpreted as network failure by the agent and will lower the score of the hosts. > > Any idea is welcome! > > Thanks! > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
On Wed, Jul 20, 2016 at 11:05 PM, Matt . wrote: > Hi, > > I'm trying to add a host to a HE installation but my gateway is not > pingable. It's a floating IP which is usable but not pingable in this > case. > > During the first install of the HE I could give any IP to ping and I > used a source IP for the floating GW address. > > What can I do to get around this as the network is OK, even when the > GW is not pingable. > > Any idea is welcome! Just provide some other pingable IP address. HA uses this address to check if the network is ok. It does not mind if it's really your router or not. Best, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] New host HE 4.0 -> [ ERROR ] Failed to execute stage 'Environment customization': Specified gateway is not pingable
Hi, I'm trying to add a host to a HE installation but my gateway is not pingable. It's a floating IP which is usable but not pingable in this case. During the first install of the HE I could give any IP to ping and I used a source IP for the floating GW address. What can I do to get around this as the network is OK, even when the GW is not pingable. Any idea is welcome! Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
