Re: [ovirt-users] Unable to assign profile to the nic
- Original Message - From: Shanil S xielessha...@gmail.com To: users@ovirt.org Sent: Thursday, August 28, 2014 11:31:30 AM Subject: [ovirt-users] Unable to assign profile to the nic Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network Try not to provide the 'network' element at all. The vnic profile replaced the 'network' element when attaching a nic to a network. In this context you should use either networkname.../name/network or the vnic_profile id=.../. As Juan explained in other thread, any other parameter for network are being ignored and network element without name is referred as empty network. on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? -- Regards Shanil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Unable to assign profile to the nic
Hi Moti, Thanks for your reply. Let me check it with this solution. -- Regards Shanil On Sun, Aug 31, 2014 at 2:15 PM, Moti Asayag masa...@redhat.com wrote: - Original Message - From: Shanil S xielessha...@gmail.com To: users@ovirt.org Sent: Thursday, August 28, 2014 11:31:30 AM Subject: [ovirt-users] Unable to assign profile to the nic Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network Try not to provide the 'network' element at all. The vnic profile replaced the 'network' element when attaching a nic to a network. In this context you should use either networkname.../name/network or the vnic_profile id=.../. As Juan explained in other thread, any other parameter for network are being ignored and network element without name is referred as empty network. on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? -- Regards Shanil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Unable to assign profile to the nic
On 08/29/2014 05:21 AM, Shanil S wrote: Hi Juan, I have attached the screenshot of the ovirt panel after creating the nic's with the above code, Please check it. May it be that you are using version 3.3.0? The RESTAPI support for vNIC profiles was added in 3.3.1. On Thu, Aug 28, 2014 at 3:23 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 08/28/2014 10:31 AM, Shanil S wrote: Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? There is nothing severely wrong with that XML, it should work. What specific problems are you having? Does the API return an error? Anything in the logs? Note also that the boot_protocol, ip, and on_boot elements will just be ignored. These elements are used only for host NICs, not for VM NICs. If you want to change the IP configuration of the OS of the VM then you have to use whatever mechanisms that OS provides. The RESTAPI can help you in these regards only if you combine it with Cloud-init or Sysprep. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Unable to assign profile to the nic
Hi Juan, We are using the using the Ovirt 3.4.3 version. -- Regards Shanil On Fri, Aug 29, 2014 at 1:56 PM, Juan Hernandez jhern...@redhat.com wrote: On 08/29/2014 05:21 AM, Shanil S wrote: Hi Juan, I have attached the screenshot of the ovirt panel after creating the nic's with the above code, Please check it. May it be that you are using version 3.3.0? The RESTAPI support for vNIC profiles was added in 3.3.1. On Thu, Aug 28, 2014 at 3:23 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 08/28/2014 10:31 AM, Shanil S wrote: Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? There is nothing severely wrong with that XML, it should work. What specific problems are you having? Does the API return an error? Anything in the logs? Note also that the boot_protocol, ip, and on_boot elements will just be ignored. These elements are used only for host NICs, not for VM NICs. If you want to change the IP configuration of the OS of the VM then you have to use whatever mechanisms that OS provides. The RESTAPI can help you in these regards only if you combine it with Cloud-init or Sysprep. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Unable to assign profile to the nic
Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? -- Regards Shanil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Unable to assign profile to the nic
On 08/28/2014 10:31 AM, Shanil S wrote: Hi All, I am unable to assign the profile using the ovirt api code, the following xml code is used for creating the nic nic interfacevirtio/interface nameeth0/name boot_protocolstatic/boot_protocol mac address='.$ip-mac_address.'/ network ip address='.$ip-mac_ip.' netmask='255.255.255.0' gateway='.$ip-mac_gateway.'/ /network on_boottrue/on_boot vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' / /nic Could you please check if anything wrong with it ? There is nothing severely wrong with that XML, it should work. What specific problems are you having? Does the API return an error? Anything in the logs? Note also that the boot_protocol, ip, and on_boot elements will just be ignored. These elements are used only for host NICs, not for VM NICs. If you want to change the IP configuration of the OS of the VM then you have to use whatever mechanisms that OS provides. The RESTAPI can help you in these regards only if you combine it with Cloud-init or Sysprep. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
