RE: RulesDuJour; lint failes
Hi Bob, Thanks for this explanation; It solved my problem. It turned out in /usr/share/spamassassin a translation-file was causing the problems. Cheers, Thijs > -Oorspronkelijk bericht- > Van: Robert Menschel [mailto:[EMAIL PROTECTED] > Verzonden: zondag 25 september 2005 1:46 > Aan: Thijs Koetsier | Exception > CC: Fred; users@spamassassin.apache.org > Onderwerp: Re[2]: RulesDuJour; lint failes > > Hello Thijs, > > Saturday, September 24, 2005, 12:00:14 AM, you wrote: > > TKE> To lint spamassassin from the command line has no other > effect than > TKE> through RulesDuJour. The same list of errors/warnings > shows up as mentioned below. > TKE> Since I use a standard (clean) installation with only > Tripwire in > TKE> my ruleset for testing, this amount of warnings is a bit > big, isn't > TKE> it? > > TKE> But fixing the errors is exactly what I want to do; I just don't > TKE> know how :( > > The errors you're getting are from old, prior version, > SpamAssassin distribution rules files. > > Use "spamassassin -D --lint" to determine which directories > SA is looking into, and then scan all those directories for > *.cf files. > You have some old, prior version *.cf files, in a directory > that SA is scanning, and those no longer lint in the current SA. > Delete them. > > Bob Menschel > > >
Re: RulesDuJour; lint failes
"CLICK_TO_REMOVE_1 is over 50" This is an error from running 3.0x SpamAssassin with certain 2.64 targeted rule sets. Recheck all your rule sets for appropriateness with 3.04. {^_^} - Original Message - From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> To lint spamassassin from the command line has no other effect than through RulesDuJour. The same list of errors/warnings shows up as mentioned below. Since I use a standard (clean) installation with only Tripwire in my ruleset for testing, this amount of warnings is a bit big, isn't it? But fixing the errors is exactly what I want to do; I just don't know how :( Cheers, Thijs Quoting Fred <[EMAIL PROTECTED]>: Run spamassassin --lint on this server and fix the errors you have and then once all is running well, go back and try rulesDuJour. You'll get better results for sure :) Thijs Koetsier | Exception wrote: Hi, No, I did not. I just re-installed Rules Du Jour and am using Spamassassin 3 on this server since I installed it. Cheers, Thijs -Oorspronkelijk bericht- Van: Loren Wilton [mailto:[EMAIL PROTECTED] Verzonden: vrijdag 23 september 2005 15:46 Aan: users@spamassassin.apache.org Onderwerp: Re: RulesDuJour; lint failes Did you just move from 2.64 or earlier? It looks like you have some pre-3.0-only rules files. SOme of these appear to be standard SA rules files. Loren - Original Message - From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> To: Sent: Friday, September 23, 2005 5:02 AM Subject: RulesDuJour; lint failes Hi all, I'm using spamassassin 3 with rules du jour. Since a few days, when my rules du jour is runned by cron, spamassassin won't lint the rules anymore. I've looked into this problem on various sites, but didn't find a working answer, so I re-installed rules du jour but still have the same problems. So perhaps someone here knows what to do? my /etc/rulesdujour/config: TRUSTED_RULESETS="TRIPWIRE" SA_DIR="/etc/mail/spamassassin" MAIL_ADDRESS="[EMAIL PROTECTED]" SA_RESTART="/etc/init.d/spamassassin restart" (I'm just using one ruleset for testing purposes) my /etc/mail/spamassassin/local.cf: required_score 3 report_safe 1 rewrite_header subject {Spam} bayes_auto_learn 1 bayes_auto_learn_threshold_nonspam 0.1 bayes_auto_learn_threshold_spam 12.0 When running the /usr/local/sbin/rules_du_jour script, the rules are attempted to lint, which failes. The following is logged: (zoltar is my machines name) Installing new ruleset from /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2 Installing new version... TripWire has changed on zoltar. Version line: # Version 1.18 More Typo's fixed. Attempting to --lint the rules. No files updated; No restart required. Rules Du Jour Run Summary:RulesDuJour Run Summary on zoltar: TripWire has changed on zoltar. Version line: # Version 1.18 More Typo's fixed. ***WARNING***: spamassassin --lint failed. Rolling configuration files back, not restarting SpamAssassin. Rollback command is: mv -f /etc/mail/spamassassin/tripwire.cf /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2; rm -f /etc/mail/spamassassin/tripwire.cf; Lint output: warning: description for CLICK_TO_REMOVE_1 is over 50 chars warning: description for HTML_IMAGE_RATIO_06 is over 50 chars warning: description exists for non-existent rule LOSEWEIGHT ... And then a whole more lot of warnings telling that 'description exists for non-existent rule ...' and descriptions which are over 50 chars, which I can't paste here because my mail gets returned because it's marked as spam :) It sums up to: ... lint: 274 issues detected. please rerun with debug enabled for more information. Anybody know what this could be? Cheers, Thijs Exception webmail - www.exception.nl
Re: RulesDuJour; lint failes
To lint spamassassin from the command line has no other effect than through RulesDuJour. The same list of errors/warnings shows up as mentioned below. Since I use a standard (clean) installation with only Tripwire in my ruleset for testing, this amount of warnings is a bit big, isn't it? But fixing the errors is exactly what I want to do; I just don't know how :( Cheers, Thijs Quoting Fred <[EMAIL PROTECTED]>: Run spamassassin --lint on this server and fix the errors you have and then once all is running well, go back and try rulesDuJour. You'll get better results for sure :) Thijs Koetsier | Exception wrote: Hi, No, I did not. I just re-installed Rules Du Jour and am using Spamassassin 3 on this server since I installed it. Cheers, Thijs -Oorspronkelijk bericht- Van: Loren Wilton [mailto:[EMAIL PROTECTED] Verzonden: vrijdag 23 september 2005 15:46 Aan: users@spamassassin.apache.org Onderwerp: Re: RulesDuJour; lint failes Did you just move from 2.64 or earlier? It looks like you have some pre-3.0-only rules files. SOme of these appear to be standard SA rules files. Loren - Original Message - From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> To: Sent: Friday, September 23, 2005 5:02 AM Subject: RulesDuJour; lint failes Hi all, I'm using spamassassin 3 with rules du jour. Since a few days, when my rules du jour is runned by cron, spamassassin won't lint the rules anymore. I've looked into this problem on various sites, but didn't find a working answer, so I re-installed rules du jour but still have the same problems. So perhaps someone here knows what to do? my /etc/rulesdujour/config: TRUSTED_RULESETS="TRIPWIRE" SA_DIR="/etc/mail/spamassassin" MAIL_ADDRESS="[EMAIL PROTECTED]" SA_RESTART="/etc/init.d/spamassassin restart" (I'm just using one ruleset for testing purposes) my /etc/mail/spamassassin/local.cf: required_score 3 report_safe 1 rewrite_header subject {Spam} bayes_auto_learn 1 bayes_auto_learn_threshold_nonspam 0.1 bayes_auto_learn_threshold_spam 12.0 When running the /usr/local/sbin/rules_du_jour script, the rules are attempted to lint, which failes. The following is logged: (zoltar is my machines name) Installing new ruleset from /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2 Installing new version... TripWire has changed on zoltar. Version line: # Version 1.18 More Typo's fixed. Attempting to --lint the rules. No files updated; No restart required. Rules Du Jour Run Summary:RulesDuJour Run Summary on zoltar: TripWire has changed on zoltar. Version line: # Version 1.18 More Typo's fixed. ***WARNING***: spamassassin --lint failed. Rolling configuration files back, not restarting SpamAssassin. Rollback command is: mv -f /etc/mail/spamassassin/tripwire.cf /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2; rm -f /etc/mail/spamassassin/tripwire.cf; Lint output: warning: description for CLICK_TO_REMOVE_1 is over 50 chars warning: description for HTML_IMAGE_RATIO_06 is over 50 chars warning: description exists for non-existent rule LOSEWEIGHT ... And then a whole more lot of warnings telling that 'description exists for non-existent rule ...' and descriptions which are over 50 chars, which I can't paste here because my mail gets returned because it's marked as spam :) It sums up to: ... lint: 274 issues detected. please rerun with debug enabled for more information. Anybody know what this could be? Cheers, Thijs Exception webmail - www.exception.nl
Re: RulesDuJour; lint failes
Run spamassassin --lint on this server and fix the errors you have and then once all is running well, go back and try rulesDuJour. You'll get better results for sure :) Thijs Koetsier | Exception wrote: > Hi, > > No, I did not. > I just re-installed Rules Du Jour and am using Spamassassin 3 on this > server since I installed it. > > Cheers, > Thijs > >> -Oorspronkelijk bericht- >> Van: Loren Wilton [mailto:[EMAIL PROTECTED] >> Verzonden: vrijdag 23 september 2005 15:46 >> Aan: users@spamassassin.apache.org >> Onderwerp: Re: RulesDuJour; lint failes >> >> Did you just move from 2.64 or earlier? It looks like you have some >> pre-3.0-only rules files. SOme of these appear to be standard SA >> rules files. >> >> Loren >> >> - Original Message - >> From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> >> To: >> Sent: Friday, September 23, 2005 5:02 AM >> Subject: RulesDuJour; lint failes >> >> >>> Hi all, >>> >>> I'm using spamassassin 3 with rules du jour. >>> >>> Since a few days, when my rules du jour is runned by cron, >> spamassassin >>> won't lint the rules anymore. I've looked into this problem >> on various >>> sites, but didn't find a working answer, so I re-installed >> rules du jour >> but >>> still have the same problems. So perhaps someone here knows >> what to do? >>> >>> my /etc/rulesdujour/config: >>> >>> TRUSTED_RULESETS="TRIPWIRE" >>> SA_DIR="/etc/mail/spamassassin" >>> MAIL_ADDRESS="[EMAIL PROTECTED]" >>> SA_RESTART="/etc/init.d/spamassassin restart" >>> >>> (I'm just using one ruleset for testing purposes) >>> >>> my /etc/mail/spamassassin/local.cf: >>> >>> required_score 3 >>> report_safe 1 >>> rewrite_header subject {Spam} >>> bayes_auto_learn 1 >>> bayes_auto_learn_threshold_nonspam 0.1 >>> bayes_auto_learn_threshold_spam 12.0 >>> >>> When running the /usr/local/sbin/rules_du_jour script, the rules are >>> attempted to lint, which failes. The following is logged: >>> (zoltar is my machines name) >>> >>> Installing new ruleset from >>> /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2 >>> Installing new version... >>> >>> TripWire has changed on zoltar. >>> Version line: # Version 1.18 More Typo's fixed. >>> Attempting to --lint the rules. >>> No files updated; No restart required. >>> >>> Rules Du Jour Run Summary:RulesDuJour Run Summary on zoltar: >>> >>> TripWire has changed on zoltar. >>> Version line: # Version 1.18 More Typo's fixed. >>> >>> ***WARNING***: spamassassin --lint failed. >>> Rolling configuration files back, not restarting SpamAssassin. >>> Rollback command is: mv -f /etc/mail/spamassassin/tripwire.cf >>> /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2; rm -f >>> /etc/mail/spamassassin/tripwire.cf; >>> >>> Lint output: warning: description for CLICK_TO_REMOVE_1 is >> over 50 chars >>> warning: description for HTML_IMAGE_RATIO_06 is over 50 chars >>> warning: description exists for non-existent rule LOSEWEIGHT ... >>> And then a whole more lot of warnings telling that >> 'description exists for >>> non-existent rule ...' and descriptions which are over 50 >> chars, which I >>> can't paste here because my mail gets returned because it's >> marked as spam >>> :) >>> It sums up to: >>> ... >>> lint: 274 issues detected. please rerun with debug enabled for more >>> information. >>> >>> Anybody know what this could be? >>> >>> Cheers, >>> Thijs
RE: RulesDuJour; lint failes
Hi, No, I did not. I just re-installed Rules Du Jour and am using Spamassassin 3 on this server since I installed it. Cheers, Thijs > -Oorspronkelijk bericht- > Van: Loren Wilton [mailto:[EMAIL PROTECTED] > Verzonden: vrijdag 23 september 2005 15:46 > Aan: users@spamassassin.apache.org > Onderwerp: Re: RulesDuJour; lint failes > > Did you just move from 2.64 or earlier? It looks like you have some > pre-3.0-only rules files. SOme of these appear to be standard SA > rules files. > > Loren > > - Original Message - > From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> > To: > Sent: Friday, September 23, 2005 5:02 AM > Subject: RulesDuJour; lint failes > > > > Hi all, > > > > I'm using spamassassin 3 with rules du jour. > > > > Since a few days, when my rules du jour is runned by cron, > spamassassin > > won't lint the rules anymore. I've looked into this problem > on various > > sites, but didn't find a working answer, so I re-installed > rules du jour > but > > still have the same problems. So perhaps someone here knows > what to do? > > > > my /etc/rulesdujour/config: > > > > TRUSTED_RULESETS="TRIPWIRE" > > SA_DIR="/etc/mail/spamassassin" > > MAIL_ADDRESS="[EMAIL PROTECTED]" > > SA_RESTART="/etc/init.d/spamassassin restart" > > > > (I'm just using one ruleset for testing purposes) > > > > my /etc/mail/spamassassin/local.cf: > > > > required_score 3 > > report_safe 1 > > rewrite_header subject {Spam} > > bayes_auto_learn 1 > > bayes_auto_learn_threshold_nonspam 0.1 > > bayes_auto_learn_threshold_spam 12.0 > > > > When running the /usr/local/sbin/rules_du_jour script, the rules are > > attempted to lint, which failes. The following is logged: > > (zoltar is my machines name) > > > > Installing new ruleset from > > /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2 > > Installing new version... > > > > TripWire has changed on zoltar. > > Version line: # Version 1.18 More Typo's fixed. > > Attempting to --lint the rules. > > No files updated; No restart required. > > > > Rules Du Jour Run Summary:RulesDuJour Run Summary on zoltar: > > > > TripWire has changed on zoltar. > > Version line: # Version 1.18 More Typo's fixed. > > > > ***WARNING***: spamassassin --lint failed. > > Rolling configuration files back, not restarting SpamAssassin. > > Rollback command is: mv -f /etc/mail/spamassassin/tripwire.cf > > /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2; rm -f > > /etc/mail/spamassassin/tripwire.cf; > > > > Lint output: warning: description for CLICK_TO_REMOVE_1 is > over 50 chars > > warning: description for HTML_IMAGE_RATIO_06 is over 50 chars > > warning: description exists for non-existent rule LOSEWEIGHT ... > > And then a whole more lot of warnings telling that > 'description exists for > > non-existent rule ...' and descriptions which are over 50 > chars, which I > > can't paste here because my mail gets returned because it's > marked as spam > > :) > > It sums up to: > > ... > > lint: 274 issues detected. please rerun with debug enabled for more > > information. > > > > Anybody know what this could be? > > > > Cheers, > > Thijs >
Re: RulesDuJour; lint failes
Did you just move from 2.64 or earlier? It looks like you have some pre-3.0-only rules files. SOme of these appear to be standard SA rules files. Loren - Original Message - From: "Thijs Koetsier | Exception" <[EMAIL PROTECTED]> To: Sent: Friday, September 23, 2005 5:02 AM Subject: RulesDuJour; lint failes > Hi all, > > I'm using spamassassin 3 with rules du jour. > > Since a few days, when my rules du jour is runned by cron, spamassassin > won't lint the rules anymore. I've looked into this problem on various > sites, but didn't find a working answer, so I re-installed rules du jour but > still have the same problems. So perhaps someone here knows what to do? > > my /etc/rulesdujour/config: > > TRUSTED_RULESETS="TRIPWIRE" > SA_DIR="/etc/mail/spamassassin" > MAIL_ADDRESS="[EMAIL PROTECTED]" > SA_RESTART="/etc/init.d/spamassassin restart" > > (I'm just using one ruleset for testing purposes) > > my /etc/mail/spamassassin/local.cf: > > required_score 3 > report_safe 1 > rewrite_header subject {Spam} > bayes_auto_learn 1 > bayes_auto_learn_threshold_nonspam 0.1 > bayes_auto_learn_threshold_spam 12.0 > > When running the /usr/local/sbin/rules_du_jour script, the rules are > attempted to lint, which failes. The following is logged: > (zoltar is my machines name) > > Installing new ruleset from > /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2 > Installing new version... > > TripWire has changed on zoltar. > Version line: # Version 1.18 More Typo's fixed. > Attempting to --lint the rules. > No files updated; No restart required. > > Rules Du Jour Run Summary:RulesDuJour Run Summary on zoltar: > > TripWire has changed on zoltar. > Version line: # Version 1.18 More Typo's fixed. > > ***WARNING***: spamassassin --lint failed. > Rolling configuration files back, not restarting SpamAssassin. > Rollback command is: mv -f /etc/mail/spamassassin/tripwire.cf > /etc/mail/spamassassin/RulesDuJour/99_FVGT_Tripwire.cf.2; rm -f > /etc/mail/spamassassin/tripwire.cf; > > Lint output: warning: description for CLICK_TO_REMOVE_1 is over 50 chars > warning: description for HTML_IMAGE_RATIO_06 is over 50 chars > warning: description exists for non-existent rule LOSEWEIGHT > ... > And then a whole more lot of warnings telling that 'description exists for > non-existent rule ...' and descriptions which are over 50 chars, which I > can't paste here because my mail gets returned because it's marked as spam > :) > It sums up to: > ... > lint: 274 issues detected. please rerun with debug enabled for more > information. > > Anybody know what this could be? > > Cheers, > Thijs