Re: [vdr] skip +/- 60 sec suggestion.
2011/2/6 Steffen Barszus > On Sun, 6 Feb 2011 12:47:33 -0800 > VDR User wrote: > > > On Sun, Feb 6, 2011 at 12:16 PM, Theunis Potgieter > > wrote: > > >> IIRC, mythtv had a feature built-in that skips ads automagically. > > >> Maybe a plugin could be written for VDR which provides the same > > >> function. Would be very cool and resolve the problem with seeking > > >> h264 recordings where the still frame will remain unchanged for > > >> several seconds and by the time it does change, its seeked several > > >> minutes. So with h264 ffw/rew you either seek no where or too far. > > >> It's pretty bad unfortunately. > > > > > > There is a package called noad for vdr which makes the marks on > > > where the adverts start/stop. you just need to press skip to jump > > > to the next mark while playing or you can enable it in vdr to > > > automatically jump. This is of course a patch that enables this > > > feature. > > > > I'll gladly give it a try but the only url I found for noad just goes > > to some apache page. Do you have a current url or even hg/git > > address? > > there is an actively maintained plugin called markad - which might be > worth consideration before ... Yes, markad is the better choice!!! ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
On 6 February 2011 22:47, VDR User wrote: > > I'll gladly give it a try but the only url I found for noad just goes > to some apache page. Do you have a current url or even hg/git > address? > http://noad.heliohost.org/ ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
On Sun, 6 Feb 2011 12:47:33 -0800 VDR User wrote: > On Sun, Feb 6, 2011 at 12:16 PM, Theunis Potgieter > wrote: > >> IIRC, mythtv had a feature built-in that skips ads automagically. > >> Maybe a plugin could be written for VDR which provides the same > >> function. Would be very cool and resolve the problem with seeking > >> h264 recordings where the still frame will remain unchanged for > >> several seconds and by the time it does change, its seeked several > >> minutes. So with h264 ffw/rew you either seek no where or too far. > >> It's pretty bad unfortunately. > > > > There is a package called noad for vdr which makes the marks on > > where the adverts start/stop. you just need to press skip to jump > > to the next mark while playing or you can enable it in vdr to > > automatically jump. This is of course a patch that enables this > > feature. > > I'll gladly give it a try but the only url I found for noad just goes > to some apache page. Do you have a current url or even hg/git > address? there is an actively maintained plugin called markad - which might be worth consideration before ... ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
On Sun, Feb 6, 2011 at 12:16 PM, Theunis Potgieter wrote: >> IIRC, mythtv had a feature built-in that skips ads automagically. >> Maybe a plugin could be written for VDR which provides the same >> function. Would be very cool and resolve the problem with seeking >> h264 recordings where the still frame will remain unchanged for >> several seconds and by the time it does change, its seeked several >> minutes. So with h264 ffw/rew you either seek no where or too far. >> It's pretty bad unfortunately. > > There is a package called noad for vdr which makes the marks on where > the adverts start/stop. you just need to press skip to jump to the > next mark while playing or you can enable it in vdr to automatically > jump. This is of course a patch that enables this feature. I'll gladly give it a try but the only url I found for noad just goes to some apache page. Do you have a current url or even hg/git address? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
On 6 February 2011 19:23, VDR User wrote: > IIRC, mythtv had a feature built-in that skips ads automagically. > Maybe a plugin could be written for VDR which provides the same > function. Would be very cool and resolve the problem with seeking > h264 recordings where the still frame will remain unchanged for > several seconds and by the time it does change, its seeked several > minutes. So with h264 ffw/rew you either seek no where or too far. > It's pretty bad unfortunately. > There is a package called noad for vdr which makes the marks on where the adverts start/stop. you just need to press skip to jump to the next mark while playing or you can enable it in vdr to automatically jump. This is of course a patch that enables this feature. Theunis ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
I would not trust an ads auto skipper until broadcasters were required to embed something to signal the start/stop of ads and that be enforced by withdraw of broadcast license if not followed. And that will never happen. Advertises do anything and everything to get their ads watched even to the point of taking companies to court to remove ads skipping systems. If want to save a recording without adds, better to just edit them out by hand. I use the jump ahead to skip comercials and then rw back a bit because it never seems to be the same jump amount. Sometimes they have more comercials and now I'm also noticing that skip seems to not always skip the same amount. Sometimes it only skips ahead a few seconds. I've had to skip twice to get through the same comercial at times. On 2/6/2011 10:23 AM, VDR User wrote: On Sun, Feb 6, 2011 at 9:17 AM, Mario Schulz wrote: Am 06.02.2011 11:43, schrieb Torgeir Veimo: When using the skip forward / backward buttons, eg to jump through the ads, it would be convenient if the skip backward button skipped backwards 30 seconds instead of 60, on the first press. Subsequent skip backwards would skip 60 seconds as normal. This would make it easier to narrow down the start of a program after skipping ads. Binary search has already been patched into some distributions with the Liemikuutio-patch. Cf. http://www.saunalahti.fi/~rahrenbe/vdr/patches/index.php IIRC, mythtv had a feature built-in that skips ads automagically. Maybe a plugin could be written for VDR which provides the same function. Would be very cool and resolve the problem with seeking h264 recordings where the still frame will remain unchanged for several seconds and by the time it does change, its seeked several minutes. So with h264 ffw/rew you either seek no where or too far. It's pretty bad unfortunately. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
On Sun, Feb 6, 2011 at 9:17 AM, Mario Schulz wrote: > Am 06.02.2011 11:43, schrieb Torgeir Veimo: >> When using the skip forward / backward buttons, eg to jump through the >> ads, it would be convenient if the skip backward button skipped >> backwards 30 seconds instead of 60, on the first press. Subsequent >> skip backwards would skip 60 seconds as normal. >> >> This would make it easier to narrow down the start of a program after >> skipping ads. >> > > Binary search has already been patched into some distributions with the > Liemikuutio-patch. > > Cf. http://www.saunalahti.fi/~rahrenbe/vdr/patches/index.php IIRC, mythtv had a feature built-in that skips ads automagically. Maybe a plugin could be written for VDR which provides the same function. Would be very cool and resolve the problem with seeking h264 recordings where the still frame will remain unchanged for several seconds and by the time it does change, its seeked several minutes. So with h264 ffw/rew you either seek no where or too far. It's pretty bad unfortunately. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] skip +/- 60 sec suggestion.
Am 06.02.2011 11:43, schrieb Torgeir Veimo: > When using the skip forward / backward buttons, eg to jump through the > ads, it would be convenient if the skip backward button skipped > backwards 30 seconds instead of 60, on the first press. Subsequent > skip backwards would skip 60 seconds as normal. > > This would make it easier to narrow down the start of a program after > skipping ads. > Binary search has already been patched into some distributions with the Liemikuutio-patch. Cf. http://www.saunalahti.fi/~rahrenbe/vdr/patches/index.php ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
