Re: [Veritas-bu] Upgrade Strategies
The general rule of thumb is to always do as few changes as possible to minimize the risk of things going seriously wrong. As long as 5.1MP6 is supported on RHEL 2.1 (I assumed you've checked - I haven't), you're taking the right approach by upgrading to 5.1MP6 first. Once you have that upgrade complete, let it stabilize for a while then build up your new system. There's really no catalog migration - you can rsync the /usr/openv tree to the RHEL 4 system - shut down the RHEL 2.1 system, change the RHEL 4 system host name back to what the original system name was, and then re-run the device configuration setup. Don't try and change names on your master during your migration - that will just get you in trouble. .../Ed -- Ed Wilts, RHCE, BCFP mailto:[EMAIL PROTECTED] I GoodSearch for Bundles Of Love http://www.goodsearch.com/?charityid=821118 > -Original Message- > From: [EMAIL PROTECTED] [mailto:veritas-bu- > [EMAIL PROTECTED] On Behalf Of Sturgis, Grant > Sent: Tuesday, May 29, 2007 3:49 PM > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Upgrade Strategies > > Greetings List, > > We are running 5.0MP7 on RHEL 2.1 and we want to move to 5.1MP6 on RHEL > 4.0 and new hardware. > > What should the order of upgrade be? My first inclination would be to > upgrade NBU first to 5.1MP6 and then install new hardware with RHEL 4, > install NBU 5.1MP6 and migrate the catalog. Does that make sense? > > Any suggestions are welcome. > > Thanks, > > Grant ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] NBU 6 - removing 'dead' clients (Windows Master)
Too easy! Cheers, Tim -Original Message- From: Preston, Douglas L [mailto:[EMAIL PROTECTED] Sent: Tuesday, 29 May 2007 10:48 PM To: Wilkinson, Tim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] NBU 6 - removing 'dead' clients (Windows Master) Delete the client from all the policies that it is in and it will be removed from the client list. Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wilkinson, Tim Sent: Monday, May 28, 2007 4:15 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] NBU 6 - removing 'dead' clients (Windows Master) Hi, What's the best way to remove a client from NBU client list if the server has 'died'? It's just a standard LAN client. Cheers, - Tim Wilkinson I.T. Support Officer Science Corporate Information Systems Defence Science & Technology Organisation Department of Defence Tel: (02) 96921484 Fax: (02) 96921562 Email: [EMAIL PROTECTED] IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914. If you have received this email in error, you are requested to contact the sender and delete the email. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Upgrade Strategies
Greetings List, We are running 5.0MP7 on RHEL 2.1 and we want to move to 5.1MP6 on RHEL 4.0 and new hardware. What should the order of upgrade be? My first inclination would be to upgrade NBU first to 5.1MP6 and then install new hardware with RHEL 4, install NBU 5.1MP6 and migrate the catalog. Does that make sense? Any suggestions are welcome. Thanks, Grant --- Pardon this: This electronic message transmission is a PRIVATE communication which contains information which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. Please notify the sender of the delivery error by replying to this message, or notify us by telephone (877-633-2436, ext. 0), and then delete it from your system. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9
stdbka02:/dev/st # lsmod Module Size Used by af_packet 41868 0 edd27808 0 usb_storage87488 3 hid61184 0 e1000 129028 0 ipv6 350456 34 mptctl 49928 4 mptbase76384 1 mptctl ipmi_devintf 27536 2 ipmi_si54432 1 ipmi_msghandler57860 2 ipmi_devintf,ipmi_si joydev 27776 0 st 59428 0 sr_mod 34980 0 dell_rbu 24744 0 lpfc 227168 0 scsi_transport_fc 24576 1 lpfc bnx2 159952 0 ehci_hcd 47876 0 uhci_hcd 49568 0 hw_random 22696 0 evdev 27264 0 usbcore 141432 6 usb_storage,hid,ehci_hcd,uhci_hcd sg 59320 2 subfs 25856 2 dm_mod 77536 9 ext3 141552 8 jbd91208 1 ext3 megaraid_sas 51512 8 sd_mod 38400 6 scsi_mod 151808 8 usb_storage,st,sr_mod,lpfc,scsi_transport_fc,sg,megaraid_sas,sd_mod Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Peter DrakeUnderkoffler [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 2:12 PM To: ZIMMER, RANDY K [AG/1000] Cc: Robin Small; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 what does the output from lsmod show? Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 ZIMMER, RANDY K [AG/1000] wrote: > There is no switch involved the fibre is attached directly from the > server to the tape drive. > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Robin Small [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:55 PM > To: veritas-bu@mailman.eng.auburn.edu; ZIMMER, RANDY K [AG/1000] > Subject: Re: [Veritas-bu] Trouble getting tape drives recognized onLinux > Server running SLES9 > > With the emulex fc cards showing up in lspci and not having drives show > up anywhere on the lsscsi, could it be FC switch zoning issues? > > You may want to doublecheck the zoning config on your FC switch to make > sure your new media server can see the right drives. > > ~ Robin > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQFGXHrkl+lekZRM55oRAjYMAKC4yfpo7HjVTk+UPKVK0cmexXc/RQCfYkUS v2l9PyC9M8R6f1IUzu1qNTg= =v0cq -END PGP SIGNATURE- - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___
Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 what does the output from lsmod show? Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 ZIMMER, RANDY K [AG/1000] wrote: > There is no switch involved the fibre is attached directly from the > server to the tape drive. > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Robin Small [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:55 PM > To: veritas-bu@mailman.eng.auburn.edu; ZIMMER, RANDY K [AG/1000] > Subject: Re: [Veritas-bu] Trouble getting tape drives recognized onLinux > Server running SLES9 > > With the emulex fc cards showing up in lspci and not having drives show > up anywhere on the lsscsi, could it be FC switch zoning issues? > > You may want to doublecheck the zoning config on your FC switch to make > sure your new media server can see the right drives. > > ~ Robin > > > > - > This e-mail message may contain privileged and/or confidential information, > and is intended to be received only by persons entitled to receive such > information. If you have received this e-mail in error, please notify the > sender immediately. Please delete it and all attachments from any servers, > hard drives or any other media. Other use of this e-mail by you is strictly > prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, > reading and archival by Monsanto. The recipient of this e-mail is solely > responsible for checking for the presence of "Viruses" or other "Malware". > Monsanto accepts no liability for any damage caused by any such code > transmitted by or accompanying this e-mail or any attachment. > - > > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQFGXHrkl+lekZRM55oRAjYMAKC4yfpo7HjVTk+UPKVK0cmexXc/RQCfYkUS v2l9PyC9M8R6f1IUzu1qNTg= =v0cq -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9
Straight through cable vs crossover? That's kind of a stumper.. I asked our san guy about that, and he tells me that some that he gets that are one way where they should be the other (and has had to send some back because the connectors weren't adjustable to swap positions). I'll admit I know enough about FC to get my backup stuff running, but not much more. But I'd imagine (guessing, really) that a direct connect would need the transmit/receive transposed where going through a fc switch wouldn't. >>> "ZIMMER, RANDY K [AG/1000]" <[EMAIL PROTECTED]> 5/29/2007 11:45 AM >>> There is no switch involved the fibre is attached directly from the server to the tape drive. Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Robin Small [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:55 PM To: veritas-bu@mailman.eng.auburn.edu; ZIMMER, RANDY K [AG/1000] Subject: Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9 With the emulex fc cards showing up in lspci and not having drives show up anywhere on the lsscsi, could it be FC switch zoning issues? You may want to doublecheck the zoning config on your FC switch to make sure your new media server can see the right drives. ~ Robin - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9
There is no switch involved the fibre is attached directly from the server to the tape drive. Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Robin Small [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:55 PM To: veritas-bu@mailman.eng.auburn.edu; ZIMMER, RANDY K [AG/1000] Subject: Re: [Veritas-bu] Trouble getting tape drives recognized onLinux Server running SLES9 With the emulex fc cards showing up in lspci and not having drives show up anywhere on the lsscsi, could it be FC switch zoning issues? You may want to doublecheck the zoning config on your FC switch to make sure your new media server can see the right drives. ~ Robin - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
quick way to tell is in /proc/scsi/ If the emulex cards are listed there in one way or another, then I'd think the drives would be loaded. as an example, with my qlogics: # ls -l /proc/scsi/ dr-xr-xr-x4 root root 0 May 29 11:05 . dr-xr-xr-x 392 root root 0 May 11 10:00 .. -r--r--r--1 root root 0 May 29 11:05 device_info dr-xr-xr-x2 root root 0 May 29 11:05 qla2xxx -r--r--r--1 root root 0 May 29 11:05 scsi dr-xr-xr-x2 root root 0 May 29 11:05 sg # ls -l /proc/scsi/qla2xxx/ total 0 dr-xr-xr-x 2 root root 0 May 29 11:06 . dr-xr-xr-x 4 root root 0 May 29 11:06 .. -rw-r--r-- 1 root root 0 May 29 11:06 1 -rw-r--r-- 1 root root 0 May 29 11:06 2 -rw-r--r-- 1 root root 0 May 29 11:06 3 >>> Justin Piszcz <[EMAIL PROTECTED]> 5/29/2007 10:56 AM >>> Looks like you need to load the driver first? The tape drives are hooked up to a fiber mesh/network or directly to the tape drives? If they're hooked up to a fiber network you need to zone the drives. On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > The following: > > [0:0:8:0]enclosu DP BACKPLANE1.05 - > [0:2:0:0]diskDELL PERC 5/i 1.03 /dev/sda > [0:2:1:0]diskDELL PERC 5/i 1.03 /dev/sdb > [2:0:0:0]cd/dvd Dell Virtual CDROM 123 /dev/sr0 > [3:0:0:0]diskDell Virtual Floppy 123 /dev/sdc > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Hampus Lind [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:42 PM > To: ZIMMER, RANDY K [AG/1000] > Cc: veritas-bu@mailman.eng.auburn.edu > Subject: SV: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 > > Hi, > > What do you get from "lsscsi" command? > > If you run Qlogic HBA you could run "scli" and scan the buses for the drives > to see if the zones are correct. > > Cheers, > > Hampus Lind > Rikspolisstyrelsen > National Police Board > Tel dir: +46 (0)8 - 401 99 43 > Tel mob: +46 (0)70 - 217 92 66 > E-mail: [EMAIL PROTECTED] > > > -Ursprungligt meddelande- > Från: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] För Justin Piszcz > Skickat: den 29 maj 2007 19:28 > Till: ZIMMER, RANDY K [AG/1000] > Kopia: veritas-bu@mailman.eng.auburn.edu > Ämne: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux > Server running SLES9 > > Does the host see them? > > cat /proc/scsi/scsi > > > On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > >> All, >> >> I need some pointer on how I get my tape drives recognized by my Linux >> server running SLES 9. We are trying to add a Linux server into our >> environment as a Media Server and am having difficulty getting the OS to >> recognize the tape drives. I have open support call with Novell and >> Symantec and am getting nowhere fast. Any ideas would be helpful... >> >> Thanks, >> >> Randy Zimmer >> Sr. Unix System Administrator >> Monsanto Enterprise Infrastructure Team >> Office: 314-694-3109 >> Mobile: 314-960-0500 >> [EMAIL PROTECTED] >> >> >> >> > > - >> This e-mail message may contain privileged and/or confidential > information, and is intended to be received only by persons entitled to > receive such information. If you have received this e-mail in error, please > notify the sender immediately. Please delete it and all attachments from any > servers, hard drives or any other media. Other use of this e-mail by you is > strictly prohibited. >> >> >> All e-mails and attachments sent and received are subject to monitoring, > reading and archival by Monsanto. The recipient of this e-mail is solely > responsible for checking for the presence of "Viruses" or other "Malware". > Monsanto accepts no liability for any damage caused by any such code > transmitted by or accompanying this e-mail or any attachment. >> > > - >> >> > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsi
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 If the lpfc driver is available, it would be called "lpfc". Getting a newer version from the Emulex web site is good idea as you can then also download the version matching lputil utility for firmware upgrades and HBA modification. If you tail your messages file or watch your console when you perform a insmod lpfc or modprobe lpfc you can watch it pick up the targets. If this is part of a fabric, make sure the correct zoning is in place. Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 ZIMMER, RANDY K [AG/1000] wrote: > That seems to be the problem I am having I don't know what driver needs > to be loaded and can't get any support from Novell. Below is the output > from my "lspci command": > > :00:00.0 Host bridge: Intel Corporation Workstation Memory > Controller Hub (rev 12) > :00:02.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 2 > (rev 12) > :00:03.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 3 > (rev 12) > :00:04.0 PCI bridge: Intel Corporation Server PCI Express x8 Port > 4-5 (rev 12) > :00:05.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 5 > (rev 12) > :00:06.0 PCI bridge: Intel Corporation Server PCI Express x8 Port > 6-7 (rev 12) > :00:07.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 7 > (rev 12) > :00:10.0 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:10.1 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:10.2 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:11.0 Host bridge: Intel Corporation: Unknown device 25f1 (rev > 12) > :00:13.0 Host bridge: Intel Corporation: Unknown device 25f3 (rev > 12) > :00:15.0 Host bridge: Intel Corporation Server FBD Registers (rev > 12) > :00:16.0 Host bridge: Intel Corporation Server FBD Registers (rev > 12) > :00:1c.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Root Port 1 (rev 09) > :00:1d.0 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #1 (rev 09) > :00:1d.1 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #2 (rev 09) > :00:1d.2 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #3 (rev 09) > :00:1d.7 USB Controller: Intel Corporation Enterprise Southbridge > EHCI USB (rev 09) > :00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) > :00:1f.0 ISA bridge: Intel Corporation Enterprise Southbridge LPC > (rev 09) > :00:1f.1 IDE interface: Intel Corporation Enterprise Southbridge > PATA (rev 09) > :01:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCI > Express-to-PCI Express Bridge > :01:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCI > Express-to-PCI Express Bridge > :02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID > controller 5 > :04:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) > :05:00.0 Ethernet controller: Broadcom Corporation: Unknown device > 164c (rev 12) > :06:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Upstream Port (rev 01) > :06:00.3 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express to PCI-X Bridge (rev 01) > :07:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Downstream Port E1 (rev 01) > :07:01.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Downstream Port E2 (rev 01) > :08:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) > :09:00.0 Ethernet controller: Broadcom Corporation: Unknown device > 164c (rev 12) > :0c:00.0 Ethernet controller: Intel Corporation: Unknown device 105e > (rev 06) > :0c:00.1 Ethernet controller: Intel Corporation: Unknown device 105e > (rev 06) > :0e:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI > Bridge A (rev 09) > :0e:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI > Bridge B (rev 09) > :0f:03.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :0f:03.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :10:04.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :10:04.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :12:0d.0 VGA compatible controller: ATI Technologies Inc: Unknown > device 515e (rev 02) > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Justin Piszcz [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:35 PM > To: ZIMMER, RANDY K [AG/1000] > Cc: veritas-bu@mailman.eng.auburn.edu > Subject: RE: [Veritas-bu] Trouble getting tape drives recognized on > Linux Server running SLES9
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
With the emulex fc cards showing up in lspci and not having drives show up anywhere on the lsscsi, could it be FC switch zoning issues? You may want to doublecheck the zoning config on your FC switch to make sure your new media server can see the right drives. ~ Robin ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
Looks like you need to load the driver first? The tape drives are hooked up to a fiber mesh/network or directly to the tape drives? If they're hooked up to a fiber network you need to zone the drives. On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: The following: [0:0:8:0]enclosu DP BACKPLANE1.05 - [0:2:0:0]diskDELL PERC 5/i 1.03 /dev/sda [0:2:1:0]diskDELL PERC 5/i 1.03 /dev/sdb [2:0:0:0]cd/dvd Dell Virtual CDROM 123 /dev/sr0 [3:0:0:0]diskDell Virtual Floppy 123 /dev/sdc Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Hampus Lind [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:42 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: SV: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Hi, What do you get from "lsscsi" command? If you run Qlogic HBA you could run "scli" and scan the buses for the drives to see if the zones are correct. Cheers, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] -Ursprungligt meddelande- Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Justin Piszcz Skickat: den 29 maj 2007 19:28 Till: ZIMMER, RANDY K [AG/1000] Kopia: veritas-bu@mailman.eng.auburn.edu Ämne: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: All, I need some pointer on how I get my tape drives recognized by my Linux server running SLES 9. We are trying to add a Linux server into our environment as a Media Server and am having difficulty getting the OS to recognize the tape drives. I have open support call with Novell and Symantec and am getting nowhere fast. Any ideas would be helpful... Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
Hi, What do you get from "lsscsi" command? If you run Qlogic HBA you could run "scli" and scan the buses for the drives to see if the zones are correct. Cheers, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] -Ursprungligt meddelande- Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Justin Piszcz Skickat: den 29 maj 2007 19:28 Till: ZIMMER, RANDY K [AG/1000] Kopia: veritas-bu@mailman.eng.auburn.edu Ämne: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
So go to Emulex's site and find the driver for: > :10:04.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel And install it and make sure it loads upon reboot and you should be all set. Justin. On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > That seems to be the problem I am having I don't know what driver needs > to be loaded and can't get any support from Novell. Below is the output > from my "lspci command": > > :00:00.0 Host bridge: Intel Corporation Workstation Memory > Controller Hub (rev 12) > :00:02.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 2 > (rev 12) > :00:03.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 3 > (rev 12) > :00:04.0 PCI bridge: Intel Corporation Server PCI Express x8 Port > 4-5 (rev 12) > :00:05.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 5 > (rev 12) > :00:06.0 PCI bridge: Intel Corporation Server PCI Express x8 Port > 6-7 (rev 12) > :00:07.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 7 > (rev 12) > :00:10.0 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:10.1 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:10.2 Host bridge: Intel Corporation Server Error Reporting > Registers (rev 12) > :00:11.0 Host bridge: Intel Corporation: Unknown device 25f1 (rev > 12) > :00:13.0 Host bridge: Intel Corporation: Unknown device 25f3 (rev > 12) > :00:15.0 Host bridge: Intel Corporation Server FBD Registers (rev > 12) > :00:16.0 Host bridge: Intel Corporation Server FBD Registers (rev > 12) > :00:1c.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Root Port 1 (rev 09) > :00:1d.0 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #1 (rev 09) > :00:1d.1 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #2 (rev 09) > :00:1d.2 USB Controller: Intel Corporation Enterprise Southbridge > UHCI USB #3 (rev 09) > :00:1d.7 USB Controller: Intel Corporation Enterprise Southbridge > EHCI USB (rev 09) > :00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) > :00:1f.0 ISA bridge: Intel Corporation Enterprise Southbridge LPC > (rev 09) > :00:1f.1 IDE interface: Intel Corporation Enterprise Southbridge > PATA (rev 09) > :01:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCI > Express-to-PCI Express Bridge > :01:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCI > Express-to-PCI Express Bridge > :02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID > controller 5 > :04:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) > :05:00.0 Ethernet controller: Broadcom Corporation: Unknown device > 164c (rev 12) > :06:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Upstream Port (rev 01) > :06:00.3 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express to PCI-X Bridge (rev 01) > :07:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Downstream Port E1 (rev 01) > :07:01.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI > Express Downstream Port E2 (rev 01) > :08:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) > :09:00.0 Ethernet controller: Broadcom Corporation: Unknown device > 164c (rev 12) > :0c:00.0 Ethernet controller: Intel Corporation: Unknown device 105e > (rev 06) > :0c:00.1 Ethernet controller: Intel Corporation: Unknown device 105e > (rev 06) > :0e:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI > Bridge A (rev 09) > :0e:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI > Bridge B (rev 09) > :0f:03.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :0f:03.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :10:04.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :10:04.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel > Host Adapter (rev 01) > :12:0d.0 VGA compatible controller: ATI Technologies Inc: Unknown > device 515e (rev 02) > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Justin Piszcz [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:35 PM > To: ZIMMER, RANDY K [AG/1000] > Cc: veritas-bu@mailman.eng.auburn.edu > Subject: RE: [Veritas-bu] Trouble getting tape drives recognized on > Linux Server running SLES9 > > Then your SCSI/Fiber card does not see the tape drives. You'd need to > run > lspci or such to see what card you have, load the driver for it and then > > make sure the drives are attached correctly. > > Justin. > > On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > >> No it does not. >> >> Thanks, >> >> Randy Zimmer >> Sr. Un
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
The following: [0:0:8:0]enclosu DP BACKPLANE1.05 - [0:2:0:0]diskDELL PERC 5/i 1.03 /dev/sda [0:2:1:0]diskDELL PERC 5/i 1.03 /dev/sdb [2:0:0:0]cd/dvd Dell Virtual CDROM 123 /dev/sr0 [3:0:0:0]diskDell Virtual Floppy 123 /dev/sdc Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Hampus Lind [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:42 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: SV: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Hi, What do you get from "lsscsi" command? If you run Qlogic HBA you could run "scli" and scan the buses for the drives to see if the zones are correct. Cheers, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] -Ursprungligt meddelande- Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Justin Piszcz Skickat: den 29 maj 2007 19:28 Till: ZIMMER, RANDY K [AG/1000] Kopia: veritas-bu@mailman.eng.auburn.edu Ämne: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
We are running the 2.6 kernel and we have Emulex LP1 cards. Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Jeff Lightner [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:41 PM To: Justin Piszcz; ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Which kernel (2.4 or 2.6) does SLES9 have? Some time ago we found a similar issue on our RHEL 3 (2.4 kernel) servers using Qlogic cards. We use a fibre bridge for the drives here and recently found that with the 2.6 kernels there is an option that can be passed into the driver modules for QLA that will make it see all drives attached to the fibre bridges. Before 2.6 there was no flag to make it skip gaps so it would see some drives but not others. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin Piszcz Sent: Tuesday, May 29, 2007 1:28 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
Which kernel (2.4 or 2.6) does SLES9 have? Some time ago we found a similar issue on our RHEL 3 (2.4 kernel) servers using Qlogic cards. We use a fibre bridge for the drives here and recently found that with the 2.6 kernels there is an option that can be passed into the driver modules for QLA that will make it see all drives attached to the fibre bridges. Before 2.6 there was no flag to make it skip gaps so it would see some drives but not others. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin Piszcz Sent: Tuesday, May 29, 2007 1:28 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
That seems to be the problem I am having I don't know what driver needs to be loaded and can't get any support from Novell. Below is the output from my "lspci command": :00:00.0 Host bridge: Intel Corporation Workstation Memory Controller Hub (rev 12) :00:02.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 2 (rev 12) :00:03.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 3 (rev 12) :00:04.0 PCI bridge: Intel Corporation Server PCI Express x8 Port 4-5 (rev 12) :00:05.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 5 (rev 12) :00:06.0 PCI bridge: Intel Corporation Server PCI Express x8 Port 6-7 (rev 12) :00:07.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 7 (rev 12) :00:10.0 Host bridge: Intel Corporation Server Error Reporting Registers (rev 12) :00:10.1 Host bridge: Intel Corporation Server Error Reporting Registers (rev 12) :00:10.2 Host bridge: Intel Corporation Server Error Reporting Registers (rev 12) :00:11.0 Host bridge: Intel Corporation: Unknown device 25f1 (rev 12) :00:13.0 Host bridge: Intel Corporation: Unknown device 25f3 (rev 12) :00:15.0 Host bridge: Intel Corporation Server FBD Registers (rev 12) :00:16.0 Host bridge: Intel Corporation Server FBD Registers (rev 12) :00:1c.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Root Port 1 (rev 09) :00:1d.0 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #1 (rev 09) :00:1d.1 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #2 (rev 09) :00:1d.2 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #3 (rev 09) :00:1d.7 USB Controller: Intel Corporation Enterprise Southbridge EHCI USB (rev 09) :00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) :00:1f.0 ISA bridge: Intel Corporation Enterprise Southbridge LPC (rev 09) :00:1f.1 IDE interface: Intel Corporation Enterprise Southbridge PATA (rev 09) :01:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCI Express-to-PCI Express Bridge :01:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCI Express-to-PCI Express Bridge :02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5 :04:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) :05:00.0 Ethernet controller: Broadcom Corporation: Unknown device 164c (rev 12) :06:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Upstream Port (rev 01) :06:00.3 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express to PCI-X Bridge (rev 01) :07:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Downstream Port E1 (rev 01) :07:01.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Downstream Port E2 (rev 01) :08:00.0 PCI bridge: Broadcom: Unknown device 0103 (rev c3) :09:00.0 Ethernet controller: Broadcom Corporation: Unknown device 164c (rev 12) :0c:00.0 Ethernet controller: Intel Corporation: Unknown device 105e (rev 06) :0c:00.1 Ethernet controller: Intel Corporation: Unknown device 105e (rev 06) :0e:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) :0e:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) :0f:03.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel Host Adapter (rev 01) :0f:03.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel Host Adapter (rev 01) :10:04.0 Fibre Channel: Emulex Corporation LP1 Fibre Channel Host Adapter (rev 01) :10:04.1 Fibre Channel: Emulex Corporation LP1 Fibre Channel Host Adapter (rev 01) :12:0d.0 VGA compatible controller: ATI Technologies Inc: Unknown device 515e (rev 02) Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:35 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Then your SCSI/Fiber card does not see the tape drives. You'd need to run lspci or such to see what card you have, load the driver for it and then make sure the drives are attached correctly. Justin. On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > No it does not. > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Justin Piszcz [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:28 PM > To: ZIMMER, RANDY K [AG/1000] > Cc: veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Trouble getting tape drives recognized on > Linux Server running SLES9 > > Does the host see them? > > cat /proc/scsi/scsi > > > On Tu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
No it does not. Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 29, 2007 12:28 PM To: ZIMMER, RANDY K [AG/1000] Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9 Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. > - > > - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
Does the host see them? cat /proc/scsi/scsi On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > All, > > I need some pointer on how I get my tape drives recognized by my Linux > server running SLES 9. We are trying to add a Linux server into our > environment as a Media Server and am having difficulty getting the OS to > recognize the tape drives. I have open support call with Novell and > Symantec and am getting nowhere fast. Any ideas would be helpful... > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > > - > This e-mail message may contain privileged and/or confidential information, > and is intended to be received only by persons entitled to receive such > information. If you have received this e-mail in error, please notify the > sender immediately. Please delete it and all attachments from any servers, > hard drives or any other media. Other use of this e-mail by you is strictly > prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, > reading and archival by Monsanto. The recipient of this e-mail is solely > responsible for checking for the presence of "Viruses" or other "Malware". > Monsanto accepts no liability for any damage caused by any such code > transmitted by or accompanying this e-mail or any attachment. > - > > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
Then your SCSI/Fiber card does not see the tape drives. You'd need to run lspci or such to see what card you have, load the driver for it and then make sure the drives are attached correctly. Justin. On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > No it does not. > > Thanks, > > Randy Zimmer > Sr. Unix System Administrator > Monsanto Enterprise Infrastructure Team > Office: 314-694-3109 > Mobile: 314-960-0500 > [EMAIL PROTECTED] > > > -Original Message- > From: Justin Piszcz [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 29, 2007 12:28 PM > To: ZIMMER, RANDY K [AG/1000] > Cc: veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Trouble getting tape drives recognized on > Linux Server running SLES9 > > Does the host see them? > > cat /proc/scsi/scsi > > > On Tue, 29 May 2007, ZIMMER, RANDY K [AG/1000] wrote: > >> All, >> >> I need some pointer on how I get my tape drives recognized by my Linux >> server running SLES 9. We are trying to add a Linux server into our >> environment as a Media Server and am having difficulty getting the OS > to >> recognize the tape drives. I have open support call with Novell and >> Symantec and am getting nowhere fast. Any ideas would be helpful... >> >> Thanks, >> >> Randy Zimmer >> Sr. Unix System Administrator >> Monsanto Enterprise Infrastructure Team >> Office: 314-694-3109 >> Mobile: 314-960-0500 >> [EMAIL PROTECTED] >> >> >> >> > > - >> This e-mail message may contain privileged and/or confidential > information, and is intended to be received only by persons entitled to > receive such information. If you have received this e-mail in error, > please notify the sender immediately. Please delete it and all > attachments from any servers, hard drives or any other media. Other use > of this e-mail by you is strictly prohibited. >> >> >> All e-mails and attachments sent and received are subject to > monitoring, reading and archival by Monsanto. The recipient of this > e-mail is solely responsible for checking for the presence of "Viruses" > or other "Malware". Monsanto accepts no liability for any damage caused > by any such code transmitted by or accompanying this e-mail or any > attachment. >> > > - >> >> > > > - > This e-mail message may contain privileged and/or confidential information, > and is intended to be received only by persons entitled to receive such > information. If you have received this e-mail in error, please notify the > sender immediately. Please delete it and all attachments from any servers, > hard drives or any other media. Other use of this e-mail by you is strictly > prohibited. > > > All e-mails and attachments sent and received are subject to monitoring, > reading and archival by Monsanto. The recipient of this e-mail is solely > responsible for checking for the presence of "Viruses" or other "Malware". > Monsanto accepts no liability for any damage caused by any such code > transmitted by or accompanying this e-mail or any attachment. > - > ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Trouble getting tape drives recognized on Linux Server running SLES9
All, I need some pointer on how I get my tape drives recognized by my Linux server running SLES 9. We are trying to add a Linux server into our environment as a Media Server and am having difficulty getting the OS to recognize the tape drives. I have open support call with Novell and Symantec and am getting nowhere fast. Any ideas would be helpful... Thanks, Randy Zimmer Sr. Unix System Administrator Monsanto Enterprise Infrastructure Team Office: 314-694-3109 Mobile: 314-960-0500 [EMAIL PROTECTED] - This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. - ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] any trainings available for Netbackup software
* sunanda a <[EMAIL PROTECTED]> [2007-05-29 11:24]: > Hi all, > are there any trainings available for Netbackup on > differentplatforms... > If anybody knows please give me details.. I wanted to go for detail training > n netbackup. > Handson and practicle training... There are a number of different places to get training. You can start by visiting the symantec website: http://www.symantec.com/enterprise/training/index.jsp -- David Rock [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] NBU 6 - removing 'dead' clients (Windows Master)
Delete the client from all the policies that it is in and it will be removed from the client list. Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wilkinson, Tim Sent: Monday, May 28, 2007 4:15 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] NBU 6 - removing 'dead' clients (Windows Master) Hi, What's the best way to remove a client from NBU client list if the server has 'died'? It's just a standard LAN client. Cheers, - Tim Wilkinson I.T. Support Officer Science Corporate Information Systems Defence Science & Technology Organisation Department of Defence Tel: (02) 96921484 Fax: (02) 96921562 Email: [EMAIL PROTECTED] IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914. If you have received this email in error, you are requested to contact the sender and delete the email. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] backup failed with status code 800 NB6.1 in solaris
Could be a few things. 1. Did you use the wizard to configure your drives and storage units? 2. If not start looking at that. You could have configure the drives as DLT and the tapes to go into the drives as DLT2. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sonu Sent: Tuesday, May 29, 2007 2:05 AM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] backup failed with status code 800 NB6.1 in solaris hi all, I am sonu, new to this forum.. i am trying to take backup using netbackup6.1 on solaris 9. backup failed with statuscode as 800 and details are below. "Error nbjm (pid=293) NBU status: 800, EMM status: No drives are available resource request failed (800)" " Try the following: Locate the EMM reason string, correct the problem, and rerun the job." I reinstalled nb6.1 and also rebooted my virtual tape library. kindly help me on this thanks sonu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] backup failed with status code 800 NB6.1 in solaris
hi all, I am sonu, new to this forum.. i am trying to take backup using netbackup6.1 on solaris 9. backup failed with statuscode as 800 and details are below. "Error nbjm (pid=293) NBU status: 800, EMM status: No drives are available resource request failed (800)" " Try the following: Locate the EMM reason string, correct the problem, and rerun the job." I reinstalled nb6.1 and also rebooted my virtual tape library. kindly help me on this thanks sonu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] backup failed with status: 800 in NB6.1 on solaris 9
hi all, i am trying to take backup using netbackup6.1 on solaris 9. backup failed with statuscode as 800 and details are below. "Error nbjm (pid=293) NBU status: 800, EMM status: No drives are available resource request failed (800)" " Try the following: Locate the EMM reason string, correct the problem, and rerun the job." I reinstalled nb6.1 and also rebooted my virtual tape library. kindly help me on this thanks sonu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] any trainings available for Netbackup software
Hi all, are there any trainings available for Netbackup on differentplatforms... If anybody knows please give me details.. I wanted to go for detail training n netbackup. Handson and practicle training... Thanks Sunanda ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
