Re: [Veritas-bu] BMR error
Thank you. After investigating further, I think I found the issue being that the system that was restored was missing the second drive partition. So as it is outlined in the document, NBU was not able to write to the partition it was looking for as it did not exist. I have to test it again, but I am pretty sure this is going to be the cause of the error. Sandor Makovits Parker Hannifin Corporation (216) 896-2261 (office) smakov...@parker.com WEAVER, Simon \(external\) simon.wea...@astrium.eads.net 09/26/2009 04:05 AM To smakov...@parker.com cc Subject RE: [Veritas-bu] BMR error Hi Take a look at this TechNote. Not sure if you are restoring ALL volumes, or just your main boot / system volume Simon http://seer.entsupport.symantec.com/docs/301490.htm From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of smakov...@parker.com Sent: Friday, September 25, 2009 9:44 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] BMR error While performing a BMR restore, has anyone seen the error staitng, Unable to make Registry modification required to boot the system? Just curious as to what this means and seeing if anyone knows the cause or solution to fix this. Thanks Sandor Makovits Parker Hannifin Corporation (216) 896-2261 (office) smakov...@parker.com PLEASE NOTE: The preceding information may be confidential or privileged. It only should be used or disseminated for the purpose of conducting business with Parker. If you are not an intended recipient, please notify the sender by replying to this message and then delete the information from your system. Thank you for your cooperation. This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. -o- Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] BMR error
Hi Sandor I suspect it is. Normally, when testing this, ensure you are using the ALL LOCAL DRIVE directive in the policy backup where the client resides. This way, BMR can capture all the partitions needed. When restoring to alternative hardware, it is VERY likely, that you need to choose your partitions that need to be restored. this is normally selected manually. HTH Simon From: smakov...@parker.com [mailto:smakov...@parker.com] Sent: Monday, September 28, 2009 12:52 PM To: WEAVER, Simon (external) Cc: veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] BMR error Thank you. After investigating further, I think I found the issue being that the system that was restored was missing the second drive partition. So as it is outlined in the document, NBU was not able to write to the partition it was looking for as it did not exist. I have to test it again, but I am pretty sure this is going to be the cause of the error. Sandor Makovits Parker Hannifin Corporation (216) 896-2261 (office) smakov...@parker.com WEAVER, Simon \(external\) simon.wea...@astrium.eads.net 09/26/2009 04:05 AM To smakov...@parker.com cc Subject RE: [Veritas-bu] BMR error Hi Take a look at this TechNote. Not sure if you are restoring ALL volumes, or just your main boot / system volume Simon http://seer.entsupport.symantec.com/docs/301490.htm http://seer.entsupport.symantec.com/docs/301490.htm From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of smakov...@parker.com Sent: Friday, September 25, 2009 9:44 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] BMR error While performing a BMR restore, has anyone seen the error staitng, Unable to make Registry modification required to boot the system? Just curious as to what this means and seeing if anyone knows the cause or solution to fix this. Thanks Sandor Makovits Parker Hannifin Corporation (216) 896-2261 (office) smakov...@parker.com PLEASE NOTE: The preceding information may be confidential or privileged. It only should be used or disseminated for the purpose of conducting business with Parker. If you are not an intended recipient, please notify the sender by replying to this message and then delete the information from your system. Thank you for your cooperation. This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. -o- Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. -o- Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a
windows script that will give you similar output (I think). Save as a
.vbs and run from the command line. You might need to change the
location of your bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy:
output(1) End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit:
output(1) End If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1)
End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez,
Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to
translate this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
OneWest Bank, FSB
Daniel Jimenez
Technical Consultant
16608 Valley View Ave
La Mirada, CA 90638
Phone: 714-520-3421
Cell: 562-480-2966
Fax: 714-520-3470
daniel.jime...@owb.com mailto:daniel.jime...@imb.com
Website: http://www.owb.com/ http://www.imb.com/
Website: http://www.onewestbank.com/ http://www.imb.com/
This message contains information which may be confidential and
privileged.
Unless you are the addressee (or authorized to receive for the
addressee),
you may not use, copy or disclose to anyone the message or any
information
contained in the message. If you have received the message in error,
please
let the sender know and delete the message. Thank you.
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
Jonathan
I really appreciate the script and will give it a try shortly, thanks.
OneWest Bank, FSB
Daniel Jimenez
Technical Consultant
16608 Valley View Ave
La Mirada, CA 90638
Phone: 714-520-3421
Cell: 562-480-2966
Fax: 714-520-3470
daniel.jime...@owb.commailto:daniel.jime...@imb.com
Website: http://www.owb.com/http://www.imb.com/
Website: http://www.onewestbank.com/http://www.imb.com/
This message contains information which may be confidential and privileged.
Unless you are the addressee (or authorized to receive for the addressee),
you may not use, copy or disclose to anyone the message or any information
contained in the message. If you have received the message in error, please
let the sender know and delete the message. Thank you.
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 8:07 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a windows
script that will give you similar output (I think). Save as a .vbs and run
from the command line. You might need to change the location of your
bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy: output(1)
End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit: output(1) End
If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1) End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to translate
this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
OneWest Bank, FSB
Daniel Jimenez
Technical Consultant
16608 Valley View Ave
La Mirada, CA 90638
Phone: 714-520-3421
Cell: 562-480-2966
Fax: 714-520-3470
daniel.jime...@owb.commailto:daniel.jime...@imb.com
Website: http://www.owb.com/http://www.imb.com/
Website: http://www.onewestbank.com/http://www.imb.com/
This message contains information which may be confidential and privileged.
Unless you are the addressee (or authorized to receive for the addressee),
you may not use, copy or disclose to anyone the message or any information
contained in the message. If you have received the message in error, please
let the sender know and delete the message. Thank you.
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 6.5.3.1 Socket Error
It looks like you are trying to restore an Exchange store, is that correct? What version of Exchange? Are you trying to restore to an RSG or SG? I doesn't look like it. I've only been able to restore the information store directly to files (without using an RSG or SG) with Exchange 5.5. If this is anything newer then I've got tons of tricks that have worked over the years, here's a few off the top of my head. Make sure This mailstore can be overwritten box is checked Make sure the locations for the database and logs are correct Revert the Netbackup agent version to whatever you were using previously When running the restore select Restore individual files option and specify SG or RSG I've restored tons of old exchange over the years and the network / socket errors are always something else. Try the stuff above, and if you're still stuck send me some more details and I can help. -Jonathan From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel Sent: Friday, September 25, 2009 7:55 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Netbackup 6.5.3.1 Socket Error Hey guys I have been attempting to restore some data off some older LTO2 tapes but continue to receive the error below and would like to know if anyone has encountered this issue. I was able to restore off of some tapes but not others. 9/23/2009 5:27:36 PM - begin Restore 9/23/2009 5:27:38 PM - 1 images required 9/23/2009 5:27:38 PM - media L05764 required 9/23/2009 5:27:45 PM - restoring image lmrbkp05p_1149137163 9/23/2009 5:25:44 PM - connecting 9/23/2009 5:25:47 PM - mounted 9/23/2009 5:25:50 PM - positioning L05764 to file 25 9/23/2009 5:27:53 PM - requesting resource L05764 9/23/2009 5:27:53 PM - granted resource L05764 9/23/2009 5:27:53 PM - granted resource PTL-TLD0-Drive12 9/23/2009 5:25:54 PM - connected; connect time: 00:00:10 9/23/2009 5:26:39 PM - positioned L05764; position time: 00:00:49 9/23/2009 5:26:40 PM - begin reading 9/23/2009 5:26:44 PM - Error bptm(pid=6744) cannot write data to socket, 10055 9/23/2009 5:26:47 PM - Error bptm(pid=6744) The following files/folders were not restored: 9/23/2009 5:26:48 PM - Error bptm(pid=6744) UTF - /Z/LMREXC01P-SG1/lmrexc01p-sg1-db3.stm 9/23/2009 5:29:04 PM - restored image lmrbkp05p_1149137163 - (socket write failed(24)); restore time 00:01:19 9/23/2009 5:29:05 PM - Warning bprd(pid=3328) Restore must be resumed prior to first image expiration on INFINITY 9/23/2009 5:29:05 PM - end Restore; elapsed time: 00:01:29 the restore failed to recover the requested files(5) Daniel Jimenez Data Protection Team ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 6.5.3.1 Socket Error
Jonathan We use to Cloan the databases and dump them onto one of our media servers and then back them up. We never used the Exchange client to backup the databases. So I will give your tricks a try and see how things go, thanks for your help. OneWest Bank, FSB Daniel Jimenez Technical Consultant 16608 Valley View Ave La Mirada, CA 90638 Phone: 714-520-3421 Cell: 562-480-2966 Fax: 714-520-3470 daniel.jime...@owb.commailto:daniel.jime...@imb.com Website: http://www.owb.com/http://www.imb.com/ Website: http://www.onewestbank.com/http://www.imb.com/ This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please let the sender know and delete the message. Thank you. From: Martin, Jonathan [mailto:jmart...@intersil.com] Sent: Monday, September 28, 2009 8:19 AM To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Netbackup 6.5.3.1 Socket Error It looks like you are trying to restore an Exchange store, is that correct? What version of Exchange? Are you trying to restore to an RSG or SG? I doesn't look like it. I've only been able to restore the information store directly to files (without using an RSG or SG) with Exchange 5.5. If this is anything newer then I've got tons of tricks that have worked over the years, here's a few off the top of my head. Make sure This mailstore can be overwritten box is checked Make sure the locations for the database and logs are correct Revert the Netbackup agent version to whatever you were using previously When running the restore select Restore individual files option and specify SG or RSG I've restored tons of old exchange over the years and the network / socket errors are always something else. Try the stuff above, and if you're still stuck send me some more details and I can help. -Jonathan From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel Sent: Friday, September 25, 2009 7:55 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Netbackup 6.5.3.1 Socket Error Hey guys I have been attempting to restore some data off some older LTO2 tapes but continue to receive the error below and would like to know if anyone has encountered this issue. I was able to restore off of some tapes but not others. 9/23/2009 5:27:36 PM - begin Restore 9/23/2009 5:27:38 PM - 1 images required 9/23/2009 5:27:38 PM - media L05764 required 9/23/2009 5:27:45 PM - restoring image lmrbkp05p_1149137163 9/23/2009 5:25:44 PM - connecting 9/23/2009 5:25:47 PM - mounted 9/23/2009 5:25:50 PM - positioning L05764 to file 25 9/23/2009 5:27:53 PM - requesting resource L05764 9/23/2009 5:27:53 PM - granted resource L05764 9/23/2009 5:27:53 PM - granted resource PTL-TLD0-Drive12 9/23/2009 5:25:54 PM - connected; connect time: 00:00:10 9/23/2009 5:26:39 PM - positioned L05764; position time: 00:00:49 9/23/2009 5:26:40 PM - begin reading 9/23/2009 5:26:44 PM - Error bptm(pid=6744) cannot write data to socket, 10055 9/23/2009 5:26:47 PM - Error bptm(pid=6744) The following files/folders were not restored: 9/23/2009 5:26:48 PM - Error bptm(pid=6744) UTF - /Z/LMREXC01P-SG1/lmrexc01p-sg1-db3.stm 9/23/2009 5:29:04 PM - restored image lmrbkp05p_1149137163 - (socket write failed(24)); restore time 00:01:19 9/23/2009 5:29:05 PM - Warning bprd(pid=3328) Restore must be resumed prior to first image expiration on INFINITY 9/23/2009 5:29:05 PM - end Restore; elapsed time: 00:01:29 the restore failed to recover the requested files(5) Daniel Jimenez Data Protection Team ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
Jonathan
I am getting the right information but in pop up windows, is there something I
need to do in order to stop these pop ups from coming up?
Daniel Jimenez
Data Protection Team
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 8:07 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a windows
script that will give you similar output (I think). Save as a .vbs and run
from the command line. You might need to change the location of your
bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy: output(1)
End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit: output(1) End
If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1) End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to translate
this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Scalar i2000 FC question
I've been given the task of taking a used fibre channel Scalar i2000 and putting it into production. I have no documentation except for the users guide I've downloaded from Quantum's web site. Does each FC I/O blade operate as an independent FC switch? As a test I have a host attached to the FC1 port on IO blade 3. The LUN masking wizard only allows me to map tape drives attached to IO blade 3, but cannot map or see tape drives on IO blade 4 or 5. Is there a way to make LUN masking work across IO blades, or are connections limited to the same IO blade? +-- |This was sent by tpcsha...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
Jonathan
Would it be possible to output the data to a file?
Daniel Jimenez
Data Protection Team
From: Jimenez, Daniel
Sent: Monday, September 28, 2009 10:12 AM
To: 'Martin, Jonathan'; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
Jonathan
I am getting the right information but in pop up windows, is there something I
need to do in order to stop these pop ups from coming up?
Daniel Jimenez
Data Protection Team
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 8:07 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a windows
script that will give you similar output (I think). Save as a .vbs and run
from the command line. You might need to change the location of your
bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy: output(1)
End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit: output(1) End
If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1) End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to translate
this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
When you run it from the command line run use cscript.exe i.e.
cscript.exe nameofscript.vb - this will send the output to the command
window (by default) versus the pop-ups. Windows Script comes in two
varieties... cscript.exe for command line stuff and wscript.exe for
windows script stuff. If you just run a .vb it defaults to the
application type in windows which is normally wscript.exe. wscript's
standard output is a pop-up window / alert.
Here's a version that outputs to a file:
strOutputFile = c:\temp\NBU-PolicyReporter.txt
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
set objFileSystem = CreateObject(Scripting.fileSystemObject)
set objOutputFile = objFileSystem.CreateTextFile(strOutputFile, TRUE)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then objOutputFile.WriteLine vbNewLine Policy:
output(1) End If
If output(0) = RES Then objOutputFile.WriteLine Policy Storage Unit:
output(1) End If
If output(0) = SCHED Then objOutputFile.WriteLine Schedule:
output(1) End If
If output(0) = SCHEDRES Then objOutputFile.WriteLine Storage Unit:
output(1) End If
loop
objOutputFile.Close
Normally I write all my Netbackup scripts in Perl so they are (more or
less) compatible with all versions of Netbackup. I don't mind writing a
little windows script to keep my skill set from rusting, but I would
definitely suggest you move to perl or use cygwin (::profuse vomiting::)
so you are more compatible with the Netbackup Community.
-Jonathan
From: Jimenez, Daniel [mailto:daniel.jime...@owb.com]
Sent: Monday, September 28, 2009 1:21 PM
To: Martin, Jonathan; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
Jonathan
Would it be possible to output the data to a file?
Daniel Jimenez
Data Protection Team
From: Jimenez, Daniel
Sent: Monday, September 28, 2009 10:12 AM
To: 'Martin, Jonathan'; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
Jonathan
I am getting the right information but in pop up windows, is there
something I need to do in order to stop these pop ups from coming up?
Daniel Jimenez
Data Protection Team
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 8:07 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a
windows script that will give you similar output (I think). Save as a
.vbs and run from the command line. You might need to change the
location of your bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy:
output(1) End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit:
output(1) End If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1)
End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez,
Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to
translate this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
Martin
That worked, I will look into Cygwin and perl for compatibility issues for the
future but I still need approval to install Cygwin on our servers. Thanks for
your help.
Daniel Jimenez
Data Protection Team
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 10:51 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
When you run it from the command line run use cscript.exe i.e. cscript.exe
nameofscript.vb - this will send the output to the command window (by default)
versus the pop-ups. Windows Script comes in two varieties... cscript.exe for
command line stuff and wscript.exe for windows script stuff. If you just run a
.vb it defaults to the application type in windows which is normally
wscript.exe. wscript's standard output is a pop-up window / alert.
Here's a version that outputs to a file:
strOutputFile = c:\temp\NBU-PolicyReporter.txt
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
set objFileSystem = CreateObject(Scripting.fileSystemObject)
set objOutputFile = objFileSystem.CreateTextFile(strOutputFile, TRUE)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then objOutputFile.WriteLine vbNewLine Policy:
output(1) End If
If output(0) = RES Then objOutputFile.WriteLine Policy Storage Unit:
output(1) End If
If output(0) = SCHED Then objOutputFile.WriteLine Schedule: output(1)
End If
If output(0) = SCHEDRES Then objOutputFile.WriteLine Storage Unit:
output(1) End If
loop
objOutputFile.Close
Normally I write all my Netbackup scripts in Perl so they are (more or less)
compatible with all versions of Netbackup. I don't mind writing a little
windows script to keep my skill set from rusting, but I would definitely
suggest you move to perl or use cygwin (::profuse vomiting::) so you are more
compatible with the Netbackup Community.
-Jonathan
From: Jimenez, Daniel [mailto:daniel.jime...@owb.com]
Sent: Monday, September 28, 2009 1:21 PM
To: Martin, Jonathan; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
Jonathan
Would it be possible to output the data to a file?
Daniel Jimenez
Data Protection Team
From: Jimenez, Daniel
Sent: Monday, September 28, 2009 10:12 AM
To: 'Martin, Jonathan'; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
Jonathan
I am getting the right information but in pop up windows, is there something I
need to do in order to stop these pop ups from coming up?
Daniel Jimenez
Data Protection Team
From: Martin, Jonathan [mailto:jmart...@intersil.com]
Sent: Monday, September 28, 2009 8:07 AM
To: Jimenez, Daniel; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Bpplist Policy Script
My understanding of awk syntax has never been very good but here's a windows
script that will give you similar output (I think). Save as a .vbs and run
from the command line. You might need to change the location of your
bppllist.exe command.
set objWshShell = CreateObject(WScript.Shell)
set objExec = objWshShell.Exec(D:\Program
Files\VERITAS\NetBackup\bin\admincmd\bppllist.exe -allpolicies)
do while not objExec.StdOut.AtEndOfStream
output = Split(objExec.StdOut.ReadLine(), )
If output(0) = CLASS Then Wscript.Echo vbNewLine Policy: output(1)
End If
If output(0) = RES Then Wscript.Echo Policy Storage Unit: output(1) End
If
If output(0) = SCHED Then Wscript.Echo Schedule: output(1) End If
If output(0) = SCHEDRES Then Wscript.Echo Storage Unit: output(1) End If
loop
-Jonathan
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez, Daniel
Sent: Friday, September 25, 2009 8:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to translate
this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Bpplist Policy Script
Heh - funny how my old scripts pop up on here every now and then...
This one is still good but I had to go to gawk on Solaris 8 instead of
awk. I've got a couple policies now that have listings large enough
to bomb-out the elderly awk on Sol 8.
-M
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez,
Daniel
Sent: Friday, September 25, 2009 6:03 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpplist Policy Script
I found the script below that pulls the policy and storage device from
Netbackup but it is for Unix and was wondering if anyone knows how to
translate this to Windows?
bppllist -allpolicies | awk `{
if ($1==CLASS) {c=$2;stu=;printf(\n%24s: ,c)}
if ($1==RES || $1==SCHEDRES ){
F=2
while($F!~/NULL/ F=NF) {if($F!=stu){stu=$F;printf(%12s
,$F)};F++}
}
}END{printf(\n)}`
OneWest Bank, FSB
Daniel Jimenez
Technical Consultant
16608 Valley View Ave
La Mirada, CA 90638
Phone: 714-520-3421
Cell: 562-480-2966
Fax: 714-520-3470
daniel.jime...@owb.com mailto:daniel.jime...@imb.com
Website: http://www.owb.com/ http://www.imb.com/
Website: http://www.onewestbank.com/ http://www.imb.com/
This message contains information which may be confidential and
privileged.
Unless you are the addressee (or authorized to receive for the
addressee),
you may not use, copy or disclose to anyone the message or any
information
contained in the message. If you have received the message in error,
please
let the sender know and delete the message. Thank you.
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Scalar i2000 FC question
Hi, No cross blade routing is allowed So the masking will only work within each blade. This doesn't prevent you from presenting 4 tapes drives down 1 FC port. To present more tape drives to a host you need to zone them in at the switch side. What version of the firmware are you using ? Hope this helps Gideon -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of tpcshadow Sent: 27 September 2009 22:43 To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Scalar i2000 FC question I've been given the task of taking a used fibre channel Scalar i2000 and putting it into production. I have no documentation except for the users guide I've downloaded from Quantum's web site. Does each FC I/O blade operate as an independent FC switch? As a test I have a host attached to the FC1 port on IO blade 3. The LUN masking wizard only allows me to map tape drives attached to IO blade 3, but cannot map or see tape drives on IO blade 4 or 5. Is there a way to make LUN masking work across IO blades, or are connections limited to the same IO blade? +-- |This was sent by tpcsha...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Inventory Logs
Hello, Anybody know, how to view the logs from all inventory history? I look all the logs in /usr/openv/nebackup/logs from master and media... Atenciosamente, Rodrigo Passos de Moura Analista de Suporte Service IT Solutions 55 21 22114471 55 51 33146000 RS-PR-SP-RJ-ARG www.service.com.br ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup server solaris X86 with VCB
Nope, you have to have a Windows 2003 server to act as the VCB Proxy Server (VMware requirement). Ideally that server will also be a media server, but it doesn't have to be -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of apatoliya Sent: Monday, September 28, 2009 4:13 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Netbackup server solaris X86 with VCB Hi Guys Does any one having idea to implement VCB with Solaris X86 master server I have my master and media server both are same We have aroud 50 VM and i am backing up as normal physical boxes but we are planning to use netbackup with VMware and i came to know that for implementing VCB you need to configure snapshot is that snapshot support on X86 solaris platform ??? Thanks +-- |This was sent by apatoli...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup server solaris X86 with VCB
Unfortunately you VCB proxy has to be Windows 2003. The way to make life easiest is for it to also be a media server, but it's not a requirement. I've never understood why a company that has used the Linux kernel so much makes all their management tools only available on Windows.. Matt Ungaro -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of apatoliya Sent: Monday, September 28, 2009 3:13 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Netbackup server solaris X86 with VCB Hi Guys Does any one having idea to implement VCB with Solaris X86 master server I have my master and media server both are same We have aroud 50 VM and i am backing up as normal physical boxes but we are planning to use netbackup with VMware and i came to know that for implementing VCB you need to configure snapshot is that snapshot support on X86 solaris platform ??? Thanks +-- |This was sent by apatoli...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ** The information contained in this communication may be confidential, is intended only for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ** ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup server solaris X86 with VCB
Hi Guys Does any one having idea to implement VCB with Solaris X86 master server I have my master and media server both are same We have aroud 50 VM and i am backing up as normal physical boxes but we are planning to use netbackup with VMware and i came to know that for implementing VCB you need to configure snapshot is that snapshot support on X86 solaris platform ??? Thanks +-- |This was sent by apatoli...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup server solaris X86 with VCB
I suspect politics over technology. The LVM layer in windows, I believe, is a port of Veritas VM. I suspect that there's a deal that says All new tech must work on Windows - since it's hard to port from Windows to *nix, it tends to say on Windows. Just guessing. -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Matt Ungaro Sent: Monday, September 28, 2009 2:18 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: Re: [Veritas-bu] Netbackup server solaris X86 with VCB Unfortunately you VCB proxy has to be Windows 2003. The way to make life easiest is for it to also be a media server, but it's not a requirement. I've never understood why a company that has used the Linux kernel so much makes all their management tools only available on Windows.. Matt Ungaro -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of apatoliya Sent: Monday, September 28, 2009 3:13 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Netbackup server solaris X86 with VCB Hi Guys Does any one having idea to implement VCB with Solaris X86 master server I have my master and media server both are same We have aroud 50 VM and i am backing up as normal physical boxes but we are planning to use netbackup with VMware and i came to know that for implementing VCB you need to configure snapshot is that snapshot support on X86 solaris platform ??? Thanks +-- |This was sent by apatoli...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ** The information contained in this communication may be confidential, is intended only for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ** ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup server solaris X86 with VCB
it is not that. look at how many Windows VMs and Physical servers vs Linux/Solaris VMs. In my case, I have 80% Windows and rest of them Linux and Solaris. Also, Linux and Solaris work quite well when you directly backup the systems. I am not saying there are no companies where Linux/Unix systems are majority, then you would not use VMware in there probably. We use Solaris Containers though along with VMware. On Mon, Sep 28, 2009 at 4:24 PM, Donaldson, Mark mark.donald...@staples.com wrote: I suspect politics over technology. The LVM layer in windows, I believe, is a port of Veritas VM. I suspect that there's a deal that says All new tech must work on Windows - since it's hard to port from Windows to *nix, it tends to say on Windows. Just guessing. -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Matt Ungaro Sent: Monday, September 28, 2009 2:18 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: Re: [Veritas-bu] Netbackup server solaris X86 with VCB Unfortunately you VCB proxy has to be Windows 2003. The way to make life easiest is for it to also be a media server, but it's not a requirement. I've never understood why a company that has used the Linux kernel so much makes all their management tools only available on Windows.. Matt Ungaro -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of apatoliya Sent: Monday, September 28, 2009 3:13 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Netbackup server solaris X86 with VCB Hi Guys Does any one having idea to implement VCB with Solaris X86 master server I have my master and media server both are same We have aroud 50 VM and i am backing up as normal physical boxes but we are planning to use netbackup with VMware and i came to know that for implementing VCB you need to configure snapshot is that snapshot support on X86 solaris platform ??? Thanks +-- |This was sent by apatoli...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ** The information contained in this communication may be confidential, is intended only for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ** ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Linux Client files Access ( Netbackup 6.5 Entrpr.)
Dear Sirs, How can i brows or Access Clients files from the Netbackup 6.5 Master server, its ony listed Server Files and Database only, i installed Client application in all Clients, after the client installation i can able to see all clients are connected to the Master Server, but cant able to list all clients Files or database in the Backup Files (Directory Structure) all clients are Enterprise Linux 5.3 x86_64 (Oracle Linux ) Netbakup 6.5 installed in Rhel 4. update 5 (x86_64) Redhat Your earliest reply is highly appreciated Thank you Salam +-- |This was sent by k.asa...@ymail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Multistream job and bpstart bpend notify script
Hi All, Is there anyone here know/experience to backup stream job and bpstart bpend script, i have tried to configure streaming job, but seem like after bpstart completed its straigth away call bpend script, even backup is not running yet.. my nbu is 6.5.2 for master and also for media server. running under solaris 10. please advise. thx Rudi. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
