Re: [Veritas-bu] New Library Configuration Parameters
Speaking of mapping patch, I noticed that mapping patch that I downloaded last month, was an older version than what was shipped with 6.5.3 patch. So I had to discard the mapping patch and just went with 6.5.3 mappings. In my case i only have LTO3 drives with an older library and all entries were there. --- On Tue, 4/21/09, bob944 wrote: > From: bob944 > Subject: Re: [Veritas-bu] New Library Configuration Parameters > To: veritas-bu@mailman.eng.auburn.edu > Date: Tuesday, April 21, 2009, 8:14 AM > > Hello, my department just bought a new Spectra Logic > tape > > library and I'm tasked with installing it. Where > do I get > > the information for the configuration parameters like > robot > > type, drive type, etc? Is the provided by Spectra > Logic or > > Symantec? > > You shouldn't need to. The device configuration wizard > does a very > good job of figuring this out. Read the manual or just > click your > way through the startup screen steps. > > Patch after installation and before doing any setup. This > includes > the Mappings patch. > > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] New Library Configuration Parameters
> Hello, my department just bought a new Spectra Logic tape > library and I'm tasked with installing it. Where do I get > the information for the configuration parameters like robot > type, drive type, etc? Is the provided by Spectra Logic or > Symantec? You shouldn't need to. The device configuration wizard does a very good job of figuring this out. Read the manual or just click your way through the startup screen steps. Patch after installation and before doing any setup. This includes the Mappings patch. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] New Library Configuration Parameters
On Tue, 21 Apr 2009, Heathe Kyle Yeakley wrote: > Hello, my department just bought a new Spectra Logic tape library and > I'm tasked with installing it. Where do I get the information for the > configuration parameters like robot type, drive type, etc? Is the > provided by Spectra Logic or Symantec? > > Thank you. > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > Hi, Generally in: NetBackup Device Configuration Guide.pdf However, I searched for Spectra and did not find it. Run tpautoconf -a after you attach the robot, I am not sure but I believe they/should be TLD if they are a standard robot with barcode reader etc. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] New Library Configuration Parameters
Hello, my department just bought a new Spectra Logic tape library and I'm tasked with installing it. Where do I get the information for the configuration parameters like robot type, drive type, etc? Is the provided by Spectra Logic or Symantec? Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu