RE: [Vserver] Vserver guest os' and virtual interfaces ?
Hi, I tried to build a vserver using: # ./vserver-build --force -m yum -n dns-int1 --hostname ns2-int.domain.dk --netdev=eth0:0 --interface=192.168.3.27 --netmask=255.255.255.0 -- -d wbel4 you certainly do not want to specify eth0:0 which isn't an interface but at best an alias ... if you want to get an alias (why would you need it for? ... ah ifconfig, I see :) then better use something like: --interface hansi=eth0:192.168.3.27/24 I found out - it creates its own virtual interface ;-) Anyway - stopping the vserver still gives: # vserver dns-int1 stop Shutting down system logger: [ OK ] Starting killall: [ OK ] A timeout occured while waiting for the vserver to finish and it was killed by sending a SIGKILL signal. Please investigate the reasons and/or increase the timeout in apps/vshelper/sync-timeout. Even though nothing particular has been started inside the vserver.. And one of the last things: If I need to run qmail inside one of the vservers, I guess it should be created with --initstyle fakeinit ?? As far as I remember, there is an issue with bind - it should have CAP_SYS_RESOURCE set (at least it was so in the old-style config). Where should this parameter be added in the 2.0-style configuration ? Regards, /Brian ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] How to build first vserver ?
[EMAIL PROTECTED] (Brian Ipsen) writes: #./vserver-build --force -m yum -n dns-int1 -- -d wbel4 Renamed '/etc/vservers/dns-int1' to '/etc/vservers/dns-int1.~1121798195~' ftp://ftp.riken.jp/Linux/whitebox/Null/en/os/i386/repodata/repomd.xml: The yum author refuses to make yum configurable so there is no way to influence '$releasever'. Its value is defined only by the release number of the installed 'fedora-release' package (resp. the configured 'distroverpkg'). Yes, it sucks and feel free to bother the yum author regarding this issue. In the meantime, all occurences of '$releasever' have to be replaced manually with the correct value. Next, I have an issue with the setup in general... I mount /vservers/dns-int as a lvm-partition .. Sorry; not supported yet. Enrico pgplxkZUQqZ5U.pgp Description: PGP signature ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver build - one remaining issue...
[EMAIL PROTECTED] (Brian Ipsen) writes: # ./vserver-build --force -m yum -n dns-int1 -- -d wbel4 ... error: unpacking of archive failed on file /usr/bin/X11;42dd8791: cpio: symlink failed - No such file or directory Happens due to a bug in rpm[1]. That's why, an 'initpre' script must be executed which worksarounds this issue. The common redhat-style 'initpre' script should be fine for RH clones, so you should add a symlink like | /etc/vservers/.distributions/initpre - /usr/lib/util-vserver/distributions/redhat/initpre I will add more diagnostics to warn the user about this... Nevertheless, as yum does not do proper errorhandling this bug will be ignored and vserver should be built. Enrico Footnotes: [1] https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=90941 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=52725 pgpbApEpCTMwS.pgp Description: PGP signature ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] V_xxxx not running ?
[EMAIL PROTECTED] (Brian Ipsen) writes: After upgrading to v2.0-rc8.1 and installing utils 0.30.208 I get this error dusing startup of my server: Starting v_httpd: exec --ip eth0 /etc/init.d/httpd start oops... some legacy scripts (inclusive vsysvwrapper) were not updated to a new naming convention (it should be $_CHBIND but not $CHBIND in the script). I will fix it, although the v_* scripts will disappear soon. Enrico pgpNEKsYOQSP3.pgp Description: PGP signature ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] V_xxxx not running ?
On Sat, Jul 23, 2005 at 10:49:11AM +0200, Enrico Scholz wrote: [EMAIL PROTECTED] (Brian Ipsen) writes: After upgrading to v2.0-rc8.1 and installing utils 0.30.208 I get this error dusing startup of my server: Starting v_httpd: exec --ip eth0 /etc/init.d/httpd start oops... some legacy scripts (inclusive vsysvwrapper) were not updated to a new naming convention (it should be $_CHBIND but not $CHBIND in the script). I will fix it, although the v_* scripts will disappear soon. and be replaced by? btw, excellent work the 0.30.208 release! I will provide a few updates to the kernel headers and the alternative syscall macros tomorrow ... best, Herbert Enrico ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] How to build first vserver ?
Hello, Enrico Scholz a écrit : [EMAIL PROTECTED] (Brian Ipsen) writes: Next, I have an issue with the setup in general... I mount /vservers/dns-int as a lvm-partition .. Sorry; not supported yet. Well, we have several vservers (60 and more on 20 servers+) set up like this (either a globale LVM /vservers partition or one LVM partition by vserver /lvm/vservers/dns, etc.) and we never had any trouble. Can you describe your setup as well as the ouptut of lvdisplay, vgdisplay, fstab, etc. ? Ben -- Benoît des Ligneris Ph. D. Président / C.E.O. Revolution Linux http://www.revolutionlinux.com/ Toutes les opinions et les prises de position exprimées dans ce courriel sont celles de son auteur et ne représentent pas nécessairement celles de Révolution Linux. Any views and opinions expressed in this email are solely those of the author and do not necessarily represent those of Revolution Linux. ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
RE: [Vserver] How to build first vserver ?
Hi, Next, I have an issue with the setup in general... I mount /vservers/dns-int as a lvm-partition .. Sorry; not supported yet. Well, we have several vservers (60 and more on 20 servers+) set up like this (either a globale LVM /vservers partition or one LVM partition by vserver /lvm/vservers/dns, etc.) and we never had any trouble. Can you describe your setup as well as the ouptut of lvdisplay, vgdisplay, fstab, etc. ? # lvdisplay File descriptor 3 left open File descriptor 5 left open File descriptor 7 left open --- Logical volume --- LV Name/dev/volgrp1/dns-ext VG Namevolgrp1 LV UUIDDvVg6C-pHWx-JAMI-Ggwd-Zabv-O2bZ-m8tTao LV Write Accessread/write LV Status available # open 1 LV Size2,00 GB Current LE 64 Segments 1 Allocation inherit Read ahead sectors 0 Block device 253:0 --- Logical volume --- LV Name/dev/volgrp1/dns-int VG Namevolgrp1 LV UUIDHKF0el-Flal-K2Br-kDnP-FsML-zDGk-7toVCr LV Write Accessread/write LV Status available # open 1 LV Size2,00 GB Current LE 64 Segments 1 Allocation inherit Read ahead sectors 0 Block device 253:1 # vgdisplay File descriptor 3 left open File descriptor 5 left open File descriptor 7 left open --- Volume group --- VG Name volgrp1 System ID Formatlvm2 Metadata Areas1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV0 Cur LV2 Open LV 2 Max PV0 Cur PV1 Act PV1 VG Size 7,41 GB PE Size 32,00 MB Total PE 237 Alloc PE / Size 128 / 4,00 GB Free PE / Size 109 / 3,41 GB VG UUID gsaR3l-U8hZ-ch5g-hvYh-2O2b-xGx3-E5vUA7 # cat /etc/fstab | grep volgrp1 /dev/volgrp1/dns-ext/vservers/dns-ext ext3defaults1 2 /dev/volgrp1/dns-int/vservers/dns-int ext3defaults1 2 Even though I'm using --force, it still complaints and tries to rename the mountpoint... 2nd: I'm not sure why the vg-commands reports those file descriptor messages, but assume it's a minor issue... Regards, /Brian ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
