Re: [Vserver] vserver-new reports a guest exists when it does not
Mandag 31 oktober 2005 19:08, skrev Chuck: > this is on a gentoo system. > > i am trying to create a guest called support. i created the mount point > in /vservers, it is mounted and a clear, empty volume. i run this command and > get this result: > > phoenix vservers # vserver-new support --hostname support --context 3920 > --interface eth3:64.113.39.20/24 template /work/guest-stuff/template.tar.bz2 > * Existing vserver installation found. Try --destroy > > support does not exist in /etc/vservers or in /vservers as a configured > guest, > the context 3920 does not exist either and the ip address is not in use. > > i have tried changing the name of the guest, the context number, even the > ethernet device still the same... its almost behaving like it has run out of > resources or something but there are only 8 guests in operation.. this would > be the 9th. > > what could be happening? H, might be a similar problem that I had with vserver-new... I created the /vserver/newvserverdir as a symbolic link to a fresh and empty volume, and vserver-new complained. I found that it seems to just check if the directory exists, and if it does, it will not make a new server. So I tried --destroy, and it did remove the link, and created a new directory on the root partition. OK. Well, anyway I did a manual mv of all the files to a symlinked dir and it seems to be OK. Possibly I bug in vserver-new this I don't know. Best regards Tor Rune Skoglund [EMAIL PROTECTED] ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
On Monday 31 October 2005 02:49 pm, Tor Rune Skoglund wrote: that was it! thanks! it should take an already created empty subdir tho... gonna suggest that > Mandag 31 oktober 2005 19:08, skrev Chuck: > > this is on a gentoo system. > > > > i am trying to create a guest called support. i created the mount point > > in /vservers, it is mounted and a clear, empty volume. i run this command and > > get this result: > > > > phoenix vservers # vserver-new support --hostname support --context 3920 > > --interface eth3:64.113.39.20/24 template /work/guest-stuff/template.tar.bz2 > > * Existing vserver installation found. Try --destroy > > > > support does not exist in /etc/vservers or in /vservers as a configured guest, > > the context 3920 does not exist either and the ip address is not in use. > > > > i have tried changing the name of the guest, the context number, even the > > ethernet device still the same... its almost behaving like it has run out of > > resources or something but there are only 8 guests in operation.. this would > > be the 9th. > > > > what could be happening? > > H, might be a similar problem that I had with vserver-new... > I created the /vserver/newvserverdir as a symbolic link to a fresh > and empty volume, and vserver-new complained. I found that it > seems to just check if the directory exists, and if it does, > it will not make a new server. > > So I tried --destroy, and it did remove the link, and created > a new directory on the root partition. OK. Well, anyway > I did a manual mv of all the files to a symlinked dir and > it seems to be OK. > > Possibly I bug in vserver-new this I don't know. > > Best regards > Tor Rune Skoglund > [EMAIL PROTECTED] > ___ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver > -- Chuck "...and the hordes of M$*ft users descended upon me in their anger, and asked 'Why do you not get the viruses or the BlueScreensOfDeath or insecure system troubles and slowness or pay through the nose for an OS as *we* do?!!', and I answered...'I use Linux'. " The Book of John, chapter 1, page 1, and end of book ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
On Monday 31 October 2005 19:08, Chuck wrote: > this is on a gentoo system. > > i am trying to create a guest called support. i created the mount point > in /vservers, it is mounted and a clear, empty volume. i run this command > and get this result: > > > phoenix vservers # vserver-new support --hostname support --context 3920 > --interface eth3:64.113.39.20/24 template > /work/guest-stuff/template.tar.bz2 * Existing vserver installation found. > Try --destroy vserver-new can handle mount points, just add --destroy and it will umount/mount the defice automagically... (you have to specify destroy here, because vserver-new can't decide if the mount point is fresh or already used.. ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
Mandag 31 oktober 2005 22:40, skrev Benedikt Boehm: > On Monday 31 October 2005 19:08, Chuck wrote: > > this is on a gentoo system. > > > > i am trying to create a guest called support. i created the mount point > > in /vservers, it is mounted and a clear, empty volume. i run this command > > and get this result: > > > > phoenix vservers # vserver-new support --hostname support --context 3920 > > --interface eth3:64.113.39.20/24 template > > /work/guest-stuff/template.tar.bz2 * Existing vserver installation found. > > Try --destroy > > vserver-new can handle mount points, just add --destroy and it will > umount/mount the defice automagically... (you have to specify destroy here, > because vserver-new can't decide if the mount point is fresh or already > used.. AFAICT then the problem is existing symlinked vserver directories rather than mount points... Tor Rune Skoglund [EMAIL PROTECTED] ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
On Monday 31 October 2005 04:42 pm, Tor Rune Skoglund wrote: no its just the fact that the directory existed whether i used it as a mount point or whether it was a simple directory.. what i had to do is after the template was installed in the new guest, then i renamed the guest directory, made another one mounted it then moved all the data from the freshly installed directory to the mountpoint. > Mandag 31 oktober 2005 22:40, skrev Benedikt Boehm: > > On Monday 31 October 2005 19:08, Chuck wrote: > > > this is on a gentoo system. > > > > > > i am trying to create a guest called support. i created the mount point > > > in /vservers, it is mounted and a clear, empty volume. i run this command > > > and get this result: > > > > > > phoenix vservers # vserver-new support --hostname support --context 3920 > > > --interface eth3:64.113.39.20/24 template > > > /work/guest-stuff/template.tar.bz2 * Existing vserver installation found. > > > Try --destroy > > > > vserver-new can handle mount points, just add --destroy and it will > > umount/mount the defice automagically... (you have to specify destroy here, > > because vserver-new can't decide if the mount point is fresh or already > > used.. > > AFAICT then the problem is existing symlinked vserver directories rather > than mount points... > > Tor Rune Skoglund > [EMAIL PROTECTED] > ___ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver > -- Chuck "...and the hordes of M$*ft users descended upon me in their anger, and asked 'Why do you not get the viruses or the BlueScreensOfDeath or insecure system troubles and slowness or pay through the nose for an OS as *we* do?!!', and I answered...'I use Linux'. " The Book of John, chapter 1, page 1, and end of book ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
On Monday 31 October 2005 04:40 pm, Benedikt Boehm wrote: ahh, ok... hehe the word destroy had me a bit leery to use it :) so then if i have a mount point already set up, then i can just use the original line with the destroy parm and it will load it in fine onto the mounted partition. > On Monday 31 October 2005 19:08, Chuck wrote: > > this is on a gentoo system. > > > > i am trying to create a guest called support. i created the mount point > > in /vservers, it is mounted and a clear, empty volume. i run this command > > and get this result: > > > > > > phoenix vservers # vserver-new support --hostname support --context 3920 > > --interface eth3:64.113.39.20/24 template > > /work/guest-stuff/template.tar.bz2 * Existing vserver installation found. > > Try --destroy > > vserver-new can handle mount points, just add --destroy and it will > umount/mount the defice automagically... (you have to specify destroy here, > because vserver-new can't decide if the mount point is fresh or already > used.. > ___ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver > -- Chuck "...and the hordes of M$*ft users descended upon me in their anger, and asked 'Why do you not get the viruses or the BlueScreensOfDeath or insecure system troubles and slowness or pay through the nose for an OS as *we* do?!!', and I answered...'I use Linux'. " The Book of John, chapter 1, page 1, and end of book ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
Re: [Vserver] vserver-new reports a guest exists when it does not
I had similar problems with the Debian version of this and my decision was to change so it check for the .../vserver/etc directory instead of the .../vserver directory. I had problem with check of .../vserver/var directory as it is used in a .deb cache feature. Regards, // Ola On Mon, Oct 31, 2005 at 06:08:36PM -0500, Chuck wrote: > On Monday 31 October 2005 04:40 pm, Benedikt Boehm wrote: > > > ahh, ok... hehe the word destroy had me a bit leery to use it :) so then if i > have a mount point already set up, then i can just use the original line with > the destroy parm and it will load it in fine onto the mounted partition. > > > On Monday 31 October 2005 19:08, Chuck wrote: > > > this is on a gentoo system. > > > > > > i am trying to create a guest called support. i created the mount point > > > in /vservers, it is mounted and a clear, empty volume. i run this command > > > and get this result: > > > > > > > > > phoenix vservers # vserver-new support --hostname support --context 3920 > > > --interface eth3:64.113.39.20/24 template > > > /work/guest-stuff/template.tar.bz2 * Existing vserver installation found. > > > Try --destroy > > > > vserver-new can handle mount points, just add --destroy and it will > > umount/mount the defice automagically... (you have to specify destroy here, > > because vserver-new can't decide if the mount point is fresh or already > > used.. > > ___ > > Vserver mailing list > > Vserver@list.linux-vserver.org > > http://list.linux-vserver.org/mailman/listinfo/vserver > > > > -- > > Chuck > > "...and the hordes of M$*ft users descended upon me in their anger, > and asked 'Why do you not get the viruses or the BlueScreensOfDeath > or insecure system troubles and slowness or pay through the nose > for an OS as *we* do?!!', and I answered...'I use Linux'. " > The Book of John, chapter 1, page 1, and end of book > > > ___ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver > -- - Ola Lundqvist --- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | +46 (0)54-10 14 30 +46 (0)70-332 1551 | | http://www.opal.dhs.org UIN/icq: 4912500 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --- ___ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver