Re: [wtr-general] Re: Does anybody have experience to run ruby watir script in a cgi script?

2010-08-18 Thread chengfeng han 
Hi, Bill,

I found the problem, I first put runner on
G:\Documents and Settings\Administrator\My Documents\runner
I saw some errors ruby G:\Documents and .,  Could not access
G:\Documnets and ...
Wed Aug 18 12:19:54 -0400 2010: Read error: #Errno::ECONNABORTED: An
establishe
d connection was aborted by the software in your host machine.

Then I put runner on G:\runner
It works fine now.

Thanks!

Jennifer

On Mon, Aug 16, 2010 at 9:50 PM, Bill Agee billa...@gmail.com wrote:

 Hi,

 After you launched your script via the runner app, did it seem to execute
 successfully?  (I'm assuming you used the google test suite that's displayed
 on the main page of the app after it's started...)  Or did the script you
 attempted to launch not run?

 The behavior you saw is normal if a test suite takes a long time to
 complete - the viewconsole page (the one with the header Console output:)
 will refresh itself every 2 seconds while a test is running.

 But if a test suite finishes and the viewconsole page keeps refreshing,
 it's probably because the script being launched does not use Test::Unit.

 The viewconsole page waits for one of the result lines seen in Test::Unit's
 output to appear in the output...but if that line is never seen then the
 refresh will recur until the browser is closed.

 I wrote that part a really long time ago when depending on Test::Unit
 seemed like a reasonable idea. :)  In hindsight the app should simply stop
 refreshing the viewconsole page as soon as the script completes.

 Thanks
 Bill


 On Mon, Aug 16, 2010 at 2:48 PM, WatirJoy chengfeng...@gmail.com wrote:

 Hi, Charles and other Watir experts,

 When I tried to execute a few line of ruby watir scripts in a cgi
 script, the page keep waiting, then timeout. Anyway, you mentioned
 rails app wiki:http://wiki.openqa.org/display/WTR/Rails+test+runner
 +example+app
 is what I am looking for. I followed the steps mentioned in the web
 page:

 1)On the client that will run the tests, install rails with 'gem
 install rails'
 2)Download runner.zip from the link below, and extract it in any dir
 on the client.
 3)Start a cmd.exe shell and cd into the extracted 'runner' dir.
 4)Launch the app with the command ruby script/server
 5)From either the local or a remote machine, open a browser and access
 http://HOST:3000 http://host:3000/
 (where HOST is your machine's address)
 6)Attempt to run the google test suite. (Note: Watir must be installed
 for the google suite to work.)

 But no console output, web server looked like keep looping:

 Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
 17:39:56)
 POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
 cHn14FVGl8Vak9BIjs8j
 g=}
 Rendering runner/viewconsole
 Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
 viewconsole]
 sole]


 Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
 17:39:58)
 POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
 cHn14FVGl8Vak9BIjs8j
 g=}
 Rendering runner/viewconsole
 Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
 viewconsole]
 sole]


 Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
 17:40:00)
 POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
 cHn14FVGl8Vak9BIjs8j
 g=}
 Rendering runner/viewconsole
 Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
 viewconsole]
 sole]


 Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
 17:40:02)
 POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
 cHn14FVGl8Vak9BIjs8j
 g=}
 Rendering runner/viewconsole
 Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
 viewconsole]
 sole]

 Did I miss something?

 Thanks!








 On Aug 13, 4:11 pm, Charley Baker charley.ba...@gmail.com wrote:
  I don't have experience doing that with cgi. And you definitely want to
 back
  up a few steps and give us more information. Honestly, I wouldn't do
 that,
  there's a rails app that's a good start on the Watir wiki:
 http://wiki.openqa.org/display/WTR/Rails+test+runner+example+app If you
  want continuous integration then there are multiple pages and refs out
 there
  for that.
 
  Hopefully that app will give you a starting point, though I've not used
 it,
  people can chime in. My only guess is you want to do something like
 that?
  Again given your email it's hard to tell what you're looking for and
 what if
  any errors you're experiencing.
 
  hth,
 
  Charley Baker
  Lead Developer, Watir,http://watir.com
 
 
 
   On Fri, Aug 13, 2010 at 1:15 PM, WatirJoy chengfeng...@gmail.com
 wrote:
   Hi,
 
   I tried to execute a few line of ruby watir scripts in a cgi script:
 
   #!/ruby/bin/ruby -w
   require 'cgi'
   require 'stringio'
   require 'rubygems'
   require 'mysql'
   require 'watir'
   require 'time'
   cgi = CGI.new
 
   serverIpValue = cgi.params['serverIp'][0]
   mailIpValue = cgi.params['mailIp'][0]
   mediaDrive = cgi.params['mediaDrive'][0]

[wtr-general] Re: Does anybody have experience to run ruby watir script in a cgi script?

2010-08-16 Thread WatirJoy 
Hi, Charles and other Watir experts,

When I tried to execute a few line of ruby watir scripts in a cgi
script, the page keep waiting, then timeout. Anyway, you mentioned
rails app wiki:http://wiki.openqa.org/display/WTR/Rails+test+runner
+example+app
is what I am looking for. I followed the steps mentioned in the web
page:

1)On the client that will run the tests, install rails with 'gem
install rails'
2)Download runner.zip from the link below, and extract it in any dir
on the client.
3)Start a cmd.exe shell and cd into the extracted 'runner' dir.
4)Launch the app with the command ruby script/server
5)From either the local or a remote machine, open a browser and access
http://HOST:3000
(where HOST is your machine's address)
6)Attempt to run the google test suite. (Note: Watir must be installed
for the google suite to work.)

But no console output, web server looked like keep looping:

Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
17:39:56)
POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
cHn14FVGl8Vak9BIjs8j
g=}
Rendering runner/viewconsole
Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
viewconsole]
sole]


Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
17:39:58)
POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
cHn14FVGl8Vak9BIjs8j
g=}
Rendering runner/viewconsole
Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
viewconsole]
sole]


Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
17:40:00)
POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
cHn14FVGl8Vak9BIjs8j
g=}
Rendering runner/viewconsole
Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
viewconsole]
sole]


Processing RunnerController#viewconsole (for 127.0.0.1 at 2010-08-16
17:40:02)
POST]
  Parameters: {authenticity_token=D9j5PjYTwpBxKU4CyVQH/
cHn14FVGl8Vak9BIjs8j
g=}
Rendering runner/viewconsole
Completed in 0ms (View: 0 | 200 OK [http://localhost/runner/
viewconsole]
sole]

Did I miss something?

Thanks!








On Aug 13, 4:11 pm, Charley Baker charley.ba...@gmail.com wrote:
 I don't have experience doing that with cgi. And you definitely want to back
 up a few steps and give us more information. Honestly, I wouldn't do that,
 there's a rails app that's a good start on the Watir 
 wiki:http://wiki.openqa.org/display/WTR/Rails+test+runner+example+app If you
 want continuous integration then there are multiple pages and refs out there
 for that.

 Hopefully that app will give you a starting point, though I've not used it,
 people can chime in. My only guess is you want to do something like that?
 Again given your email it's hard to tell what you're looking for and what if
 any errors you're experiencing.

 hth,

 Charley Baker
 Lead Developer, Watir,http://watir.com



 On Fri, Aug 13, 2010 at 1:15 PM, WatirJoy chengfeng...@gmail.com wrote:
  Hi,

  I tried to execute a few line of ruby watir scripts in a cgi script:

  #!/ruby/bin/ruby -w
  require 'cgi'
  require 'stringio'
  require 'rubygems'
  require 'mysql'
  require 'watir'
  require 'time'
  cgi = CGI.new

  serverIpValue = cgi.params['serverIp'][0]
  mailIpValue = cgi.params['mailIp'][0]
  mediaDrive = cgi.params['mediaDrive'][0]
  retension=cgi.params['retension'][0]

  puts Content-type: text/html
  puts html
  puts body
  puts serverIpValue:#{serverIpValue}p
  puts mailIpValue:#{mailIpValue}p
  puts mediaDrive:#{mediaDrive}p
  puts retension:#{retension}p
  puts Start initial system state check and system
  configuration...p
     begin_time=Time.now
     ie = Watir::IE.new
     ie.goto #{serverIpValue}
     if ie.text.include?(Password:)
     puts login in as user adminp
     ie.text_field(:name, j_username).set admin
     ie.text_field(:name, j_password).set admin
     ie.button(:value, Log in).click
     puts ie.down_load_timep
     end
     ie.close if ie
     puts Initial account login passedp

  puts /body
  puts /html

  --
  Before posting, please readhttp://watir.com/support. In short: search
  before you ask, be nice.

  You received this message because you are subscribed to
 http://groups.google.com/group/watir-general
  To post: watir-general@googlegroups.com
  To unsubscribe: 
  watir-general+unsubscr...@googlegroups.comwatir-general%2bunsubscr...@goog­legroups.com-
   Hide quoted text -

 - Show quoted text -

-- 
Before posting, please read http://watir.com/support. In short: search before 
you ask, be nice.

You received this message because you are subscribed to 
http://groups.google.com/group/watir-general
To post: watir-general@googlegroups.com
To unsubscribe: watir-general+unsubscr...@googlegroups.com