Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[vince]

On Thursday, January 13, 2022 at 3:57:17 PM UTC-8 jo...@johnkline.com wrote:

> It’s not the greatest for stable time, but it’s good enough for most. 
>  I’ve ripped this out on my machines.
>

Me too.  Just install ntp on all your systems which just plain works.   You 
don't even need to disable timesyncd, systemd uses ntp preferentially if 
it's installed and enabled.

sudo apt-get install ntp

But I disable timesyncd too just in case :-) 

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c5331d69-3f94-46f9-871b-fbae10d7f6b3n%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Tom Keffer]

I should have known you'd have the answer, John!

On Thu, Jan 13, 2022 at 3:57 PM 'John Kline' via weewx-user <
weewx-user@googlegroups.com> wrote:

> I don’t the time syncs are an issue.  I believe the time syncs after DHCP
> adverts are because of the following file:
>
> /etc/dhcp/dhclient-exit-hooks.d/timesyncd
>
> On each DHCP renewal, this script is called which causes a restart with
> the NTP servers passed by DHCP (which probably haven’t changed).  It’s not
> the greatest for stable time, but it’s good enough for most.  I’ve ripped
> this out on my machines.
>
> On Jan 13, 2022, at 1:49 PM, vince  wrote:
>
> Change one thing at a time please.
>
> On Thursday, January 13, 2022 at 1:37:21 PM UTC-8 timot...@gmail.com
> wrote:
>
>>
>> Sorry Tom, didn't see your question.  The logger is a USB logger not a
>> serial with a USB adaptor.
>>
>> I'll try the pi4 and see if we can maybe eliminate the pi(s) as being the
>> culprits.  I am also trying to locate another logger.
>>
>> Don't know what to say about the network time synchronizations.
>>
>> Thanks again you guys..
>>
>> Tim
>> On Thursday, January 13, 2022 at 10:42:25 AM UTC-10 vince wrote:
>>
>>> All I can suggest is that if you can swap in a different
>>> pi/SD/power-supply and it goes away, that would point to the pi3 being the
>>> problem.  If the problem continues with a different computer, that would
>>> point to your datalogger probably.
>>>
>>> Your logger will save a week of readings, so there's little risk of
>>> losing readings if you swap in a different pi temporarily for a couple days.
>>>
>>> You didn't answer Tom's question - is it a Davis USB logger, or a serial
>>> logger and serial2usb adaptor ?
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/614627b7-692c-4db3-af74-1973267627ean%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/64A79A3F-00D7-43B4-B2F8-6A615E95D401%40johnkline.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zECSFavC%3Dcy-o1_kWmemfw6ZRGzsi8e0P-auA%3DODDdwojg%40mail.gmail.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

['John Kline' via weewx-user]

I don’t the time syncs are an issue.  I believe the time syncs after DHCP 
adverts are because of the following file:

/etc/dhcp/dhclient-exit-hooks.d/timesyncd

On each DHCP renewal, this script is called which causes a restart with the NTP 
servers passed by DHCP (which probably haven’t changed).  It’s not the greatest 
for stable time, but it’s good enough for most.  I’ve ripped this out on my 
machines.

> On Jan 13, 2022, at 1:49 PM, vince  wrote:
> 
> Change one thing at a time please.
> 
>> On Thursday, January 13, 2022 at 1:37:21 PM UTC-8 timot...@gmail.com wrote:
>> 
>> Sorry Tom, didn't see your question.  The logger is a USB logger not a 
>> serial with a USB adaptor.
>> 
>> I'll try the pi4 and see if we can maybe eliminate the pi(s) as being the 
>> culprits.  I am also trying to locate another logger.
>> 
>> Don't know what to say about the network time synchronizations.
>> 
>> Thanks again you guys..
>> 
>> Tim
>>> On Thursday, January 13, 2022 at 10:42:25 AM UTC-10 vince wrote:
>>> All I can suggest is that if you can swap in a different pi/SD/power-supply 
>>> and it goes away, that would point to the pi3 being the problem.  If the 
>>> problem continues with a different computer, that would point to your 
>>> datalogger probably.
>>> 
>>> Your logger will save a week of readings, so there's little risk of losing 
>>> readings if you swap in a different pi temporarily for a couple days.
>>> 
>>> You didn't answer Tom's question - is it a Davis USB logger, or a serial 
>>> logger and serial2usb adaptor ?
>>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/614627b7-692c-4db3-af74-1973267627ean%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/64A79A3F-00D7-43B4-B2F8-6A615E95D401%40johnkline.com.

Re: [weewx-user] Re: windspeed extreme values

[Doug Jenkins]

Joachim:

Cleaning up bad data in your MySQL database can be done using a SQL editor.
I used DBeaver (dbeaver.io) which is a universal database manager. It will
connect to MySQL, SQLite, and MariaDB (which is what I use for WeeWX) and a
lot of other databases.

This is what i would do:

1. Download dbeaver from dbeaver.io and set it up on your workstation
2. in DBeaver, under Database, select new connection. Provide the host name
and port (I believe it is 3306) of the mySQL Server instance and login with
the same login that you are using with WeeWX.
3. Open a new SQL Script window by clicking on SQL Editor->New SQL Script.
Ensure you select the connection and database above.
4. Now using the Bad Data wiki, find the errant record by querying the
archive table in the database. The SQLite commands should work as both
databases are SQL99 compliant.
5. Before you delete any rows, dump the database to a file. you can do that
with DBeaver by clicking on the connection, navigate to the database, right
click on the database and select dump database. See screenshot for details.
6. delete the row by finding the dateTime value you want to remove and use
that in your WHERE Clause. You can use the keyword FROM_UNIXTIME to convert
the dateTime value to a real date. here is an example:
 select FROM_UNIXTIME(dateTime) , windGust from archive;

Let me know if that helps



On Thu, Jan 13, 2022 at 5:44 PM vince  wrote:

>
> When you picked mysql you essentially signed up for learning more on your
> own.
>
> See if https://www.mysqltutorial.org/mysql-update-data.aspx helps you any
> in figuring out the mysql command to do something similar to what the wiki
> sqlite3 example is doing.
>
> On Thursday, January 13, 2022 at 2:25:46 PM UTC-8 jputt...@gmail.com
> wrote:
>
>> I have tried the instruction "old 'bad' data" . But I use the
>> mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was
>> not succesfull.
>> Furthermore run here 2 instances, so no weewx.conf or weewx db but with
>> other names ( ecowitt.conf with weewx_eco db etc).
>>
>> Joachim
>>
>> gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:
>>
>>> Hi,
>>>
>>> Have you worked through the Cleaning up old 'bad' data wiki page
>>>  with
>>> an emphasis on the field windSpeed? You most likely do not see the
>>> spikes on the Seasons year plots as the Seasons year plots plot a day
>>> average value, perhaps you are seeing the spikes on the Belchertown plots
>>> because they plot a different aggregate (or perhaps no aggregate at all).
>>>
>>> Gary
>>>
>>> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com
>>> wrote:
>>>

 Hi,

 how can i delete the two peaks in the berlchertown year chart?
 These peaks do not appear in the season year diagram.
 [image: wind-belchertown.png][image: wind-season.png]
 Joachim

>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/dd279948-9e2f-43d3-88ca-be017b753eecn%40googlegroups.com
> 
> .
>


-- 
Thanks,

Doug Jenkins
Phone: 813.391.5686 | d...@dougjenkins.com | www.dougjenkins.com

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CACC0i0xuYk%2BdGbE%2B2wxidRgDbqCt987Sb4eXHs9hPso%3DSWooMA%40mail.gmail.com.

[weewx-user] Re: windspeed extreme values

[gjr80]

Also, when using commands such as wee_database in a multi (WeeWX) instance 
environment you specify which WeeWX config file (and hence which database) 
you are operating on with the --config command line option, eg:

$ wee_database --config=/home/weewx/my_config.conf --drop-daily

This is a concept that weewx-multi users need to be familiar with. Might 
pay to have a read of the Utilities Guide 
 for the utilities you need to use.

Gary

On Friday, 14 January 2022 at 08:56:29 UTC+10 gjr80 wrote:

> I'm afraid your going to have to do a bit of self help. If you've taken 
> the steps to use MySQL/MariaDB there is an expectation you have some level 
> of familiarity with MySQL/MariaDB.  All you are doing is searching your 
> archive table for values that are clear wrong.
>
> Something like:
>
> $ mysql -u root -p
> mysql> SELECT * FROM archive WHERE windSpeed>100;
>
> or limit the fields you are displaying:
>
> mysql> SELECT datetime,windSpeed FROM archive WHERE windSpeed>100;
>
>
> if you have any replace the 'bad' fields with null:
>
> mysql> UPDATE archive SET windSpeed=NULL WHERE windSpeed>100;
>
> Then drop/rebuild the daily summaries as per the wiki page.
>
> Gary
>
> On Friday, 14 January 2022 at 08:25:46 UTC+10 jputt...@gmail.com wrote:
>
>> I have tried the instruction "old 'bad' data" . But I use the 
>> mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was 
>> not succesfull. 
>> Furthermore run here 2 instances, so no weewx.conf or weewx db but with 
>> other names ( ecowitt.conf with weewx_eco db etc).
>>
>> Joachim
>>
>> gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:
>>
>>> Hi,
>>>
>>> Have you worked through the Cleaning up old 'bad' data wiki page 
>>>  with 
>>> an emphasis on the field windSpeed? You most likely do not see the 
>>> spikes on the Seasons year plots as the Seasons year plots plot a day 
>>> average value, perhaps you are seeing the spikes on the Belchertown plots 
>>> because they plot a different aggregate (or perhaps no aggregate at all).
>>>
>>> Gary
>>>
>>> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com 
>>> wrote:
>>>

 Hi,

 how can i delete the two peaks in the berlchertown year chart?
 These peaks do not appear in the season year diagram.
 [image: wind-belchertown.png][image: wind-season.png]
 Joachim

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6e1e8233-d459-4be2-8ada-60fdbcd9d8efn%40googlegroups.com.

[weewx-user] Re: windspeed extreme values

[gjr80]

I'm afraid your going to have to do a bit of self help. If you've taken the 
steps to use MySQL/MariaDB there is an expectation you have some level of 
familiarity with MySQL/MariaDB.  All you are doing is searching your 
archive table for values that are clear wrong.

Something like:

$ mysql -u root -p
mysql> SELECT * FROM archive WHERE windSpeed>100;

or limit the fields you are displaying:

mysql> SELECT datetime,windSpeed FROM archive WHERE windSpeed>100;


if you have any replace the 'bad' fields with null:

mysql> UPDATE archive SET windSpeed=NULL WHERE windSpeed>100;

Then drop/rebuild the daily summaries as per the wiki page.

Gary

On Friday, 14 January 2022 at 08:25:46 UTC+10 jputt...@gmail.com wrote:

> I have tried the instruction "old 'bad' data" . But I use the 
> mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was 
> not succesfull. 
> Furthermore run here 2 instances, so no weewx.conf or weewx db but with 
> other names ( ecowitt.conf with weewx_eco db etc).
>
> Joachim
>
> gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:
>
>> Hi,
>>
>> Have you worked through the Cleaning up old 'bad' data wiki page 
>>  with an 
>> emphasis on the field windSpeed? You most likely do not see the spikes 
>> on the Seasons year plots as the Seasons year plots plot a day average 
>> value, perhaps you are seeing the spikes on the Belchertown plots because 
>> they plot a different aggregate (or perhaps no aggregate at all).
>>
>> Gary
>>
>> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com wrote:
>>
>>>
>>> Hi,
>>>
>>> how can i delete the two peaks in the berlchertown year chart?
>>> These peaks do not appear in the season year diagram.
>>> [image: wind-belchertown.png][image: wind-season.png]
>>> Joachim
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fa3576e6-b018-41d9-ac95-10dc5dea4f9cn%40googlegroups.com.

[weewx-user] Re: windspeed extreme values

[vince]

When you picked mysql you essentially signed up for learning more on your 
own.

See if https://www.mysqltutorial.org/mysql-update-data.aspx helps you any 
in figuring out the mysql command to do something similar to what the wiki 
sqlite3 example is doing.

On Thursday, January 13, 2022 at 2:25:46 PM UTC-8 jputt...@gmail.com wrote:

> I have tried the instruction "old 'bad' data" . But I use the 
> mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was 
> not succesfull. 
> Furthermore run here 2 instances, so no weewx.conf or weewx db but with 
> other names ( ecowitt.conf with weewx_eco db etc).
>
> Joachim
>
> gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:
>
>> Hi,
>>
>> Have you worked through the Cleaning up old 'bad' data wiki page 
>>  with an 
>> emphasis on the field windSpeed? You most likely do not see the spikes 
>> on the Seasons year plots as the Seasons year plots plot a day average 
>> value, perhaps you are seeing the spikes on the Belchertown plots because 
>> they plot a different aggregate (or perhaps no aggregate at all).
>>
>> Gary
>>
>> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com wrote:
>>
>>>
>>> Hi,
>>>
>>> how can i delete the two peaks in the berlchertown year chart?
>>> These peaks do not appear in the season year diagram.
>>> [image: wind-belchertown.png][image: wind-season.png]
>>> Joachim
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/dd279948-9e2f-43d3-88ca-be017b753eecn%40googlegroups.com.

Re: [weewx-user] Re: windspeed extreme values

[Tom Keffer]

MySQL should have similar SQL commands. Off the top of my head, I can't
tell you what they are, but I imagine they are nearly identical.

You would type them in using the MySQL client tool "mysql". If you don't
know how to use that tool, I would suggest learning. I would not recommend
using MySQL unless you are thoroughly familiar with it.

On Thu, Jan 13, 2022 at 2:25 PM Joachim Puttkammer 
wrote:

> I have tried the instruction "old 'bad' data" . But I use the
> mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was
> not succesfull.
> Furthermore run here 2 instances, so no weewx.conf or weewx db but with
> other names ( ecowitt.conf with weewx_eco db etc).
>
> Joachim
>
> gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:
>
>> Hi,
>>
>> Have you worked through the Cleaning up old 'bad' data wiki page
>>  with an
>> emphasis on the field windSpeed? You most likely do not see the spikes
>> on the Seasons year plots as the Seasons year plots plot a day average
>> value, perhaps you are seeing the spikes on the Belchertown plots because
>> they plot a different aggregate (or perhaps no aggregate at all).
>>
>> Gary
>>
>> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com wrote:
>>
>>>
>>> Hi,
>>>
>>> how can i delete the two peaks in the berlchertown year chart?
>>> These peaks do not appear in the season year diagram.
>>> [image: wind-belchertown.png][image: wind-season.png]
>>> Joachim
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/11ca26b6-bbc2-46ec-9d98-e067f51ae86en%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEAOzWauAaaZCasoL4XwenPzXAbTqu-e4_HTqUm%2BOHzhDw%40mail.gmail.com.

[weewx-user] Re: windspeed extreme values

[Joachim Puttkammer]

I have tried the instruction "old 'bad' data" . But I use the 
mysql-database. To convert the DB ( 1 million records) to a sqlite-DB was 
not succesfull. 
Furthermore run here 2 instances, so no weewx.conf or weewx db but with 
other names ( ecowitt.conf with weewx_eco db etc).

Joachim

gjr80 schrieb am Donnerstag, 13. Januar 2022 um 11:31:40 UTC+1:

> Hi,
>
> Have you worked through the Cleaning up old 'bad' data wiki page 
>  with an 
> emphasis on the field windSpeed? You most likely do not see the spikes on 
> the Seasons year plots as the Seasons year plots plot a day average value, 
> perhaps you are seeing the spikes on the Belchertown plots because they 
> plot a different aggregate (or perhaps no aggregate at all).
>
> Gary
>
> On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com wrote:
>
>>
>> Hi,
>>
>> how can i delete the two peaks in the berlchertown year chart?
>> These peaks do not appear in the season year diagram.
>> [image: wind-belchertown.png][image: wind-season.png]
>> Joachim
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/11ca26b6-bbc2-46ec-9d98-e067f51ae86en%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[vince]

Change one thing at a time please.

On Thursday, January 13, 2022 at 1:37:21 PM UTC-8 timot...@gmail.com wrote:

>
> Sorry Tom, didn't see your question.  The logger is a USB logger not a 
> serial with a USB adaptor.
>
> I'll try the pi4 and see if we can maybe eliminate the pi(s) as being the 
> culprits.  I am also trying to locate another logger.
>
> Don't know what to say about the network time synchronizations.
>
> Thanks again you guys..
>
> Tim
> On Thursday, January 13, 2022 at 10:42:25 AM UTC-10 vince wrote:
>
>> All I can suggest is that if you can swap in a different 
>> pi/SD/power-supply and it goes away, that would point to the pi3 being the 
>> problem.  If the problem continues with a different computer, that would 
>> point to your datalogger probably.
>>
>> Your logger will save a week of readings, so there's little risk of 
>> losing readings if you swap in a different pi temporarily for a couple days.
>>
>> You didn't answer Tom's question - is it a Davis USB logger, or a serial 
>> logger and serial2usb adaptor ?
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/614627b7-692c-4db3-af74-1973267627ean%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Timothy Bryan]

Sorry Tom, didn't see your question.  The logger is a USB logger not a 
serial with a USB adaptor.

I'll try the pi4 and see if we can maybe eliminate the pi(s) as being the 
culprits.  I am also trying to locate another logger.

Don't know what to say about the network time synchronizations.

Thanks again you guys..

Tim
On Thursday, January 13, 2022 at 10:42:25 AM UTC-10 vince wrote:

> All I can suggest is that if you can swap in a different 
> pi/SD/power-supply and it goes away, that would point to the pi3 being the 
> problem.  If the problem continues with a different computer, that would 
> point to your datalogger probably.
>
> Your logger will save a week of readings, so there's little risk of losing 
> readings if you swap in a different pi temporarily for a couple days.
>
> You didn't answer Tom's question - is it a Davis USB logger, or a serial 
> logger and serial2usb adaptor ?
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2cef2937-cd5a-4948-b292-5246d63a0b16n%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[vince]

All I can suggest is that if you can swap in a different pi/SD/power-supply 
and it goes away, that would point to the pi3 being the problem.  If the 
problem continues with a different computer, that would point to your 
datalogger probably.

Your logger will save a week of readings, so there's little risk of losing 
readings if you swap in a different pi temporarily for a couple days.

You didn't answer Tom's question - is it a Davis USB logger, or a serial 
logger and serial2usb adaptor ?

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/cbe1865b-55a9-4026-8b65-95045d64c469n%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Timothy Bryan]

The only things I have plugged in besides the logger is the keyboard.  The 
mouse is Bluetooth. I have on occasion shared the keyboard with another 
computer, but not very often.  I thought about the power supply and it was a 
2.4 amp cube but to be safe I changed it to a 3 amp cube and that is what’s 
powering it now.

The SD card is a PNY 64gb, micro XC I, which I believe is a fast enough card 
but I could be wrong.

I do have a rpi 4 and if it would make since, I could install weewx on that one 
with the goal of eliminating weewx and the pi as the culprit?  Just a thought 
and I’ve got the time to do it...

> On Jan 13, 2022, at 9:51 AM, vince  wrote:
> 
> Are you plugging stuff in and unplugging it a lot ?
> Do you have 'just' the usb keyboard plugged in ?
> Is there anything else plugged into the USB slots ?
> How are you powering your pi ?
> 
> Most issues on a pi are from a slow SD card, or an overburdened USB subsystem 
> or the pi is being powered with a weak power supply.
> 
> Do you have a different/better power supply you might try to power the pi ?
> 
> 
> -- 
> You received this message because you are subscribed to a topic in the Google 
> Groups "weewx-user" group.
> To unsubscribe from this topic, visit 
> https://groups.google.com/d/topic/weewx-user/O45YbcJaKjM/unsubscribe 
> .
> To unsubscribe from this group and all its topics, send an email to 
> weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/27243bda-0d0d-40c5-9c3a-6f0d0a48eac6n%40googlegroups.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/01080018-AA3E-4EB3-BBF2-A7C39FD0DC57%40gmail.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Tom Keffer]

In addition to Vince's questions, here's one more: are you using a
serial-to-usb converter? If so, do you have another one you can try? They
are notoriously flaky.

You also have a *lot* of network time synchronizations, which always follow
a DHCP router advertisement. I have no idea what that means, but there are
a lot more than I would have expected.



On Thu, Jan 13, 2022 at 11:51 AM vince  wrote:

> Are you plugging stuff in and unplugging it a lot ?
> Do you have 'just' the usb keyboard plugged in ?
> Is there anything else plugged into the USB slots ?
> How are you powering your pi ?
>
> Most issues on a pi are from a slow SD card, or an overburdened USB
> subsystem or the pi is being powered with a weak power supply.
>
> Do you have a different/better power supply you might try to power the pi ?
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/27243bda-0d0d-40c5-9c3a-6f0d0a48eac6n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDFNd7aBUobY6XR7-CuUEAYuGgj9%2BT5yJPE8SKE0fUYEg%40mail.gmail.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[vince]

Are you plugging stuff in and unplugging it a lot ?
Do you have 'just' the usb keyboard plugged in ?
Is there anything else plugged into the USB slots ?
How are you powering your pi ?

Most issues on a pi are from a slow SD card, or an overburdened USB 
subsystem or the pi is being powered with a weak power supply.

Do you have a different/better power supply you might try to power the pi ?

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/27243bda-0d0d-40c5-9c3a-6f0d0a48eac6n%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Timothy Bryan]

This is the output from "dmesg --ctime" 

On Thursday, January 13, 2022 at 8:16:16 AM UTC-10 vince wrote:

> Please run:
>  dmesg --ctime
>
> I see it went whacko at 00:44 or so but I sure don't see anything saying 
> why.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/49e2bb64-0faf-4c62-a5c8-0af1ef557411n%40googlegroups.com.


dmesg_output_011322
Description: Binary data

[weewx-user] Re: rsync not working (weewx-Belchertown skin)

[vince]

"Host key verification failed." is the indicator here.

You need to attempt to ssh into the remote computer as the local weewx user 
(probably root) at least once so that ssh saves the other side's host key. 
  When it prompts you, say yes.

It should look something like this example:

# ssh testuser@pi
The authenticity of host 'nuc2 (192.168.1.171)' can't be established.
ECDSA key fingerprint is 4e:8a:b5:6a:12:a2:a0:6d:f6:64:07:35:d0:e7:17:1b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'nuc2,192.168.1.171' (ECDSA) to the list of 
known hosts.


Lastly,  your log and weewx.conf show a user name of 'remote_user' which 
I'm hoping is a typo.   If it's what you really want, you will need a user 
named "remote_user" created on the host you want to rsync to, and they will 
need to be able to write to whatever directory on the remote side that you 
specified in weewx.conf or you'll get permission errors.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/45813025-8827-4656-a470-fd10e0022480n%40googlegroups.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[vince]

Please run:
 dmesg --ctime

I see it went whacko at 00:44 or so but I sure don't see anything saying 
why.


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/22ed5085-097c-4d1e-a481-66fad63dbfddn%40googlegroups.com.

[weewx-user] Re: rsync not working (weewx-Belchertown skin)

[Topslakr Topslakr]

Is WeeWx running as the same user as your user? Error looks to me like the 
weewx user hasn't done the key sharing to allow password-less rsync over 
ssh.

On Thursday, January 13, 2022 at 10:58:19 AM UTC-5 gszla...@gmail.com wrote:

> WeeWX version 4.5.1 - debian install
> MQTT
> GW1000 API
> also running neowx-material skin
> --
> rsync works perfectly on the command line but it does not work in weewx.
> The web host uses port  for SSH.
> I've tried all types of things with ~.ssh/config but whether or not I even 
> use the config file or not, I get the exact same error:
>
> 2022-01-12 2:39 P.M.weewx.serviceweewx[19782] ERROR 
> weeutil.rsyncupload: [['rsync', '--archive', '--stats', '-e ssh -p ', 
> '/var/www/html/weewx/belchertown/', 
> 'remote_user@mydomainca:public_html/glenns/belchertown']] reported errors: 
> Host key verification failed.. rsync: connection unexpectedly closed (0 
> bytes received so far) [sender]. rsync error: unexplained error (code 255) 
> at io.c(235) [sender=3.1.3]
>
> I did see Chri's's Jan 2 thread about his port problem for rsync but in my 
> case adding port =  in the RSYNC section appears to work as I see -p 
>  in the error message above.
>
> note: if you add a "/" slash in front of public_html for the target 
> directory on the remote host, rsync does not work on the command line.
>
> note: I don't "git" git - could not see a way to download Tom's patched 
> rsyncupload.py - so i just did a cut and paste of his code with notepad++ 
> and duplicated the permissions. Hopefully it worked..at least I get the 
> same error with the patched file! I have attached a copy of the patched  
> file..just in case i didn't get the right one. I also have attached a 
> debug=1 file  along with weewx.conf.
>
> Any help with this rsync problem would be greatly appreciated!
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/410ee90f-101f-4af0-85ec-cc050fbfaa62n%40googlegroups.com.

[weewx-user] rsync not working (weewx-Belchertown skin)

[gszla...@gmail.com]

WeeWX version 4.5.1 - debian install
MQTT
GW1000 API
also running neowx-material skin
--
rsync works perfectly on the command line but it does not work in weewx.
The web host uses port  for SSH.
I've tried all types of things with ~.ssh/config but whether or not I even 
use the config file or not, I get the exact same error:

2022-01-12 2:39 P.M.weewx.serviceweewx[19782] ERROR 
weeutil.rsyncupload: [['rsync', '--archive', '--stats', '-e ssh -p ', 
'/var/www/html/weewx/belchertown/', 
'remote_user@mydomainca:public_html/glenns/belchertown']] reported errors: 
Host key verification failed.. rsync: connection unexpectedly closed (0 
bytes received so far) [sender]. rsync error: unexplained error (code 255) 
at io.c(235) [sender=3.1.3]

I did see Chri's's Jan 2 thread about his port problem for rsync but in my 
case adding port =  in the RSYNC section appears to work as I see -p 
 in the error message above.

note: if you add a "/" slash in front of public_html for the target 
directory on the remote host, rsync does not work on the command line.

note: I don't "git" git - could not see a way to download Tom's patched 
rsyncupload.py - so i just did a cut and paste of his code with notepad++ 
and duplicated the permissions. Hopefully it worked..at least I get the 
same error with the patched file! I have attached a copy of the patched  
file..just in case i didn't get the right one. I also have attached a 
debug=1 file  along with weewx.conf.

Any help with this rsync problem would be greatly appreciated!

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/86d849c3-304a-48fd-9436-ed7f727360a9n%40googlegroups.com.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2021 Tom Keffer 
# See the file LICENSE.txt for your rights.

##

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /

# Whether to log successful operations
log_success = True

# Whether to log unsuccessful operations
log_failure = True

# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.
version = 4.5.1

# Whether to try indefinitely to load the driver
loop_on_init = 1

##

#   This section is for information about the station.

[Station]

# Description of the station location
location = "Manitoulin Island"

# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 45
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -82

# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 191, meter

# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = GW1000

# If you have a website, you may specify an URL
station_url = 

# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)
week_start = 6

##

[GW1000]
# This section is for the GW1000 API driver.

# How often to poll the GW1000 API, default is every 20 seconds:
poll_interval = 20

# The driver to use:
driver = user.gw1000
ip_address = 192.168.1.15
port = 45000

##

[Simulator]
# This section is for the weewx weather station simulator

# The time (in seconds) between LOOP packets.
loop_interval = 2.5

# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator.  Emit LOOP packets as fast as possible (useful for testing).
#mode = generator

# The start time. Format is -mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00

# The driver to use:
driver = weewx.drivers.simulator

##

#   This section is for uploading data to Internet sites

[StdRESTful]

[[StationRegistry]]
# To register this weather station with weewx, set this to t

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Tom Keffer]

It looks like an instance of weewx was running, but, for some reason,
systemd stopped it. Can we see earlier in the log? It may give us a clue as
to why.

On Thu, Jan 13, 2022 at 7:00 AM Timothy Bryan  wrote:

> It happening again at at around 1am.  I woke and noticed it at 4am.
> Though I am creating a log as described in "Help! Posting To Weewx Users,"
> I don't know how to attach "/var/log/messages" log.
>
> Sorry for the ignorance but I am learning, all-be it slowly,
>
> Tim
>
> On Wednesday, January 12, 2022 at 5:36:53 PM UTC-10 vince wrote:
>
>> On Wednesday, January 12, 2022 at 5:26:22 PM UTC-8 timot...@gmail.com
>> wrote:
>>
>>>  It seems the crashes only occur roughly between 10pm and 2am either
>>> side of midnight.
>>>
>>>
>> Well when it happens again, we need to see /var/log/messages and
>> /var/log/syslog for the period before+after it fails, and also run "dmesg
>> --ctime" and give us that output for the period around when it fails please.
>>
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/de672f72-3a75-4bf9-adfb-a47eb8b73c92n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEB917OD0VAJc%2BP9nAcQ7AsVYCAGkakkeKfR2d-01UhUoA%40mail.gmail.com.

Re: [weewx-user] Vanage Pro 2 crashes WeeWx daily

[Timothy Bryan]

It happening again at at around 1am.  I woke and noticed it at 4am.  Though 
I am creating a log as described in "Help! Posting To Weewx Users," I don't 
know how to attach "/var/log/messages" log. 

Sorry for the ignorance but I am learning, all-be it slowly,

Tim

On Wednesday, January 12, 2022 at 5:36:53 PM UTC-10 vince wrote:

> On Wednesday, January 12, 2022 at 5:26:22 PM UTC-8 timot...@gmail.com 
> wrote:
>
>>  It seems the crashes only occur roughly between 10pm and 2am either side 
>> of midnight.
>>
>>
> Well when it happens again, we need to see /var/log/messages and 
> /var/log/syslog for the period before+after it fails, and also run "dmesg 
> --ctime" and give us that output for the period around when it fails please.
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/de672f72-3a75-4bf9-adfb-a47eb8b73c92n%40googlegroups.com.


mylog
Description: Binary data

[weewx-user] Re: windspeed extreme values

[gjr80]

Hi,

Have you worked through the Cleaning up old 'bad' data wiki page 
 with an 
emphasis on the field windSpeed? You most likely do not see the spikes on 
the Seasons year plots as the Seasons year plots plot a day average value, 
perhaps you are seeing the spikes on the Belchertown plots because they 
plot a different aggregate (or perhaps no aggregate at all).

Gary

On Thursday, 13 January 2022 at 19:44:56 UTC+10 jputt...@gmail.com wrote:

>
> Hi,
>
> how can i delete the two peaks in the berlchertown year chart?
> These peaks do not appear in the season year diagram.
> [image: wind-belchertown.png][image: wind-season.png]
> Joachim
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0617449d-20fb-4565-bd93-0b2f6f78cffbn%40googlegroups.com.

[weewx-user] windspeed extreme values

[Joachim Puttkammer]

Hi,

how can i delete the two peaks in the berlchertown year chart?
These peaks do not appear in the season year diagram.
[image: wind-belchertown.png][image: wind-season.png]
Joachim

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/74f0c54a-56ca-4ec2-a1f9-ef9c09611db6n%40googlegroups.com.