Re: [weewx-user] Weewx issues
I’ve gone to a 120GB mini SSD drive as well. Cheaper than a 16GB SLC micro SD card by far. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3836fb45-2622-46dc-802f-c41ea79f3bb8%40googlegroups.com.
[weewx-user] Weewx issues
If you’re using an RPi and do not have it configured to minimize disk IO ( or even if you do and have been running on the same micro SD card for a long time ) your micro SD card may be starting to fail. Copy your micro SD card image to your computer and then copy it back onto a new micro SD card. Use a very high quality card or even better, use an SLC memory type micro SD card. They’re very expensive but will last much longer. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e8fe7461-7da3-45bd-ba83-d0ca33e9df72%40googlegroups.com.
Re: [weewx-user] Clearing Archive Memory on Davis Westher Envoy
Tom, My bad. I wasn’t stopping weewx before trying the wee_device commands. With weewx stopped it works perfectly. Thanks, Allan > On Jul 25, 2019, at 8:09 AM, Thomas Keffer wrote: > > It does. In fact, that's what I use. > > It's not, by chance, an Envoy 8x? If so, we do not support it. > > If it is a regular Envoy, we'll have to see the log. It may have a few useful > clues. > > > >> On Thu, Jul 25, 2019 at 10:27 AM Allan Tyson wrote: >> I tried that. I get an unrecognized hardware error and it doesn’t complete. >> Same if I try the wee_device —info >> Does the Vantage driver not support the Weather Envoy ?. >> >>> On Jul 25, 2019, at 4:20 AM, Thomas Keffer wrote: >>> >> >> >>> Use wee_device with the --clear-memory option. Be sure to stop weewx first. >>> >>> -tk >>> >>>> On Thu, Jul 25, 2019 at 2:48 AM Allan Tyson wrote: >>>> I have a Davis USB Westher Envoy connected to an RPi running weewx. It was >>>> running fine but I stopped weewx on the RPi and disconnected the Weather >>>> Envoy USB cable from the RPi to connect it to another RPi I was using to >>>> install Raspbian Buster with weewx on a smaller micro SD card so I could >>>> save it’s image to a smaller backup image file having originally >>>> installed it on an internal 120GB SSD drive. >>>> The new installation worked just great but when I reconnected the Weather >>>> Envoy to the original RPi I discovered that the USB loggers’s memory was >>>> somehow corrupted so that weewx would no longer update Nginx. I cleared >>>> the memory by connecting the Logger to my Mac laptop & used WeatherLink to >>>> clear the archive memory. >>>> There was a Post by Tom in 2012 saying you could change the configuration >>>> of a weather envoy using the config utility in weewx as well as using the >>>> WeatherLink software. I did see the instructions for using wee_device to >>>> change the parameters of the Davis driver but when running it I get an >>>> unrecognized hardware error and the Weather Envoy isn’t listed as being >>>> supported hardware in the list of supported hardware. Only the Vantsge >>>> Vue and Vantsge Pro2 Consoles are listed though in the pictorial list of >>>> supported hardware the Weather Envoy is shown. >>>> Is there a way of clearing the Weather Envoy archive memory from the >>>> command line of the RPi so I can clear it without having to stop the RPI, >>>> disconnect the Envoy USB cable and connect it to my laptop to use the >>>> WeatherLink software to perform the clearing and then have to reconnect it >>>> to my RPi ?. >>>> >>>> Allan >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to weewx-user+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/e122fd87-079c-4c63-83ff-44ca9bb88cc4%40googlegroups.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to weewx-user+unsubscr...@googlegroups.com. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBnKYkf3XttDegi%2BCP_jFeGYdoV-D34y-8p4aVJPLBVJw%40mail.gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/0DABB0BE-FA73-439B-B274-C6DA0E06DEE8%40gmail.com. > -- > -tk > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEBVSFsjDgBxVgOz6xh2rQVXNCfr78GGnSpBKnccCCwmTg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/E09B5E0C-0C84-4118-B540-4DD5054FCD50%40gmail.com.
Re: [weewx-user] Clearing Archive Memory on Davis Westher Envoy
I tried that. I get an unrecognized hardware error and it doesn’t complete. Same if I try the wee_device —info Does the Vantage driver not support the Weather Envoy ?. > On Jul 25, 2019, at 4:20 AM, Thomas Keffer wrote: > > Use wee_device with the --clear-memory option. Be sure to stop weewx first. > > -tk > >> On Thu, Jul 25, 2019 at 2:48 AM Allan Tyson wrote: >> I have a Davis USB Westher Envoy connected to an RPi running weewx. It was >> running fine but I stopped weewx on the RPi and disconnected the Weather >> Envoy USB cable from the RPi to connect it to another RPi I was using to >> install Raspbian Buster with weewx on a smaller micro SD card so I could >> save it’s image to a smaller backup image file having originally installed >> it on an internal 120GB SSD drive. >> The new installation worked just great but when I reconnected the Weather >> Envoy to the original RPi I discovered that the USB loggers’s memory was >> somehow corrupted so that weewx would no longer update Nginx. I cleared the >> memory by connecting the Logger to my Mac laptop & used WeatherLink to clear >> the archive memory. >> There was a Post by Tom in 2012 saying you could change the configuration >> of a weather envoy using the config utility in weewx as well as using the >> WeatherLink software. I did see the instructions for using wee_device to >> change the parameters of the Davis driver but when running it I get an >> unrecognized hardware error and the Weather Envoy isn’t listed as being >> supported hardware in the list of supported hardware. Only the Vantsge Vue >> and Vantsge Pro2 Consoles are listed though in the pictorial list of >> supported hardware the Weather Envoy is shown. >> Is there a way of clearing the Weather Envoy archive memory from the >> command line of the RPi so I can clear it without having to stop the RPI, >> disconnect the Envoy USB cable and connect it to my laptop to use the >> WeatherLink software to perform the clearing and then have to reconnect it >> to my RPi ?. >> >> Allan >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/e122fd87-079c-4c63-83ff-44ca9bb88cc4%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEBnKYkf3XttDegi%2BCP_jFeGYdoV-D34y-8p4aVJPLBVJw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0DABB0BE-FA73-439B-B274-C6DA0E06DEE8%40gmail.com.
Re: [weewx-user] Errno 32 Pipe error
I am running it as a daemon. > On Jul 25, 2019, at 4:28 AM, Thomas Keffer wrote: > > How are you running weewx? > > By running it directly? You can get a "pipe error" by starting up weewx in a > console window, then closing it. > > Or, are you running it as a daemon? > > -tk > >> On Wed, Jul 24, 2019 at 1:35 AM Craig Courey wrote: >> Hoping to get some help with my setup. Have been trying to get this working >> for a week or so. Did a reinstall and finally got it to start reporting to >> Weather Underground. That's all I really want to achieve is consistent >> reliable updates to Weather underground, but I am very much a novice at >> this. Keep getting the same error ( Errno 32 pipe error ). Weewx will seem >> to work fine for a couple hours then error out. If I reboot the pi it >> usually starts working again but get the same result. Any help is much >> appreciated. I believe the debug file attached is a day or two old and might >> not reflect the current config but should be very close. Mylog and conf >> files were from this evening. >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/462e792b-68da-45dd-bcbe-a3d4ddc0586c%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEBwK-q2NuHM2QDJrJQPnLEzz2rCcL0bfEDx2F3sZBUrKw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2BA43E2B-81C4-460C-9FE6-C75566112043%40gmail.com.
[weewx-user] Clearing Archive Memory on Davis Westher Envoy
I have a Davis USB Westher Envoy connected to an RPi running weewx. It was running fine but I stopped weewx on the RPi and disconnected the Weather Envoy USB cable from the RPi to connect it to another RPi I was using to install Raspbian Buster with weewx on a smaller micro SD card so I could save it’s image to a smaller backup image file having originally installed it on an internal 120GB SSD drive. The new installation worked just great but when I reconnected the Weather Envoy to the original RPi I discovered that the USB loggers’s memory was somehow corrupted so that weewx would no longer update Nginx. I cleared the memory by connecting the Logger to my Mac laptop & used WeatherLink to clear the archive memory. There was a Post by Tom in 2012 saying you could change the configuration of a weather envoy using the config utility in weewx as well as using the WeatherLink software. I did see the instructions for using wee_device to change the parameters of the Davis driver but when running it I get an unrecognized hardware error and the Weather Envoy isn’t listed as being supported hardware in the list of supported hardware. Only the Vantsge Vue and Vantsge Pro2 Consoles are listed though in the pictorial list of supported hardware the Weather Envoy is shown. Is there a way of clearing the Weather Envoy archive memory from the command line of the RPi so I can clear it without having to stop the RPI, disconnect the Envoy USB cable and connect it to my laptop to use the WeatherLink software to perform the clearing and then have to reconnect it to my RPi ?. Allan -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e122fd87-079c-4c63-83ff-44ca9bb88cc4%40googlegroups.com.