from:"G Hammer"

Ahhh, I did extend the database sometime ago to add a field. Otherwise, I
don't recall anything.

So, if I edit the Wiki, it is live? No, I like cooperating, but I'll keep
it here and GitHub issues.



On Sat, Sep 12, 2020, 8:38 PM Tom Keffer  wrote:

> Good suggestions. I've incorporated some of them into the wiki.
>
> I can think of two possibilities why your [DataBindings] section would
> specify the new extended schema. Either you did a virgin install (instead
> of an upgrade), or you attempted to do the conversion, but didn't finish.
> The wee_database utility definitely did not touch the entry. It touches
> only the database.
>
> Any GitHub user can edit the Wiki. You don't need special permission.
>
> On Sat, Sep 12, 2020 at 5:01 PM G Hammer  wrote:
>
>> I have questions with sections of the Wiki entry.
>> .
>> It says that I would need to edit the databinding in weewx.conf.
>> Modify wx_binding. When it creates the new, modified database,
>> wee_database needs to know to use the wview_extended schema instead of
>> the old, wview schema. You do this by changing the option schema in
>> section [DataBindings] in weewx.conf.
>>
>> However, my DataBindings are as shown in the Wiki already.
>>
>> Perhaps wee_database --reconfigure took care of the entries?
>> Could all else but the database been upgraded at some point from when I
>> installed until now and all I needed was the extended database?
>>
>> I tried following the directions as given and see that I am missing some
>> PATH.
>>
>> gh@srvr:~# cd SQLITE_ROOT
>> -bash: cd: SQLITE_ROOT: No such file or directory
>>
>> Wiki says:
>> You can either shuffle the databases around so the new database has the
>> same name as the old database, or edit weewx.conf to use the new
>> database name. To do the former:
>>
>> It never addresses the later.
>>
>> Finally, instead of allowing WeeWX to rebuild the database on start, why
>> not have it done by command before starting WeeWX? If you are on a slower
>> machine and have years of data, it could take some time. Some people (me
>> for example) would worry that WeeWX hasn't started and try to stop WeeWX to
>> review their edits and steps. Running wee_database -- rebuild-daily takes
>> the guesswork out of the process.
>>
>> I think I'd break the Wiki into two sections, one for the bog standard
>> WeeWX install and the second for those using MySQL, Likely those with MySQL
>> are more familiar with its operation.
>> Which begs a question. Who can edit the Wiki? How are edits approved. I
>> would like to contribute, but not if it went live with no supervision.
>>
>> Much more 'why' in the Wiki and I like that. I get easily confused by
>> things that already exist or that fail though. Then I start reading more
>> into something than I should. See me with a fresh box from Ikea sometime...
>>
>> On Saturday, September 12, 2020 at 2:43:38 PM UTC-4, Tom Keffer wrote:
>>
>>> This has become such a common question, I wrote a Wiki on how to do it
>>> <https://github.com/weewx/weewx/wiki/Switching-to-the-new-wview_extended-schema>.
>>> It's basically a long-winded version of your much more concise summary.
>>>
>>> -tk
>>>
>>>>
>>>>
>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/4bacf1ec-3970-4e8c-a82b-655d4cf93e65o%40googlegroups.com
>> <https://groups.google.com/d/msgid/weewx-user/4bacf1ec-3970-4e8c-a82b-655d4cf93e65o%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/ccKdA9mtdyg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBDEYL%2B%3DjhYfFYnkhZ0myYJO3weTkTgs%2BLEjkvPhGmjoA%40mail.gmail.com
> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBDEYL%2B%3DjhYfFYnkhZ0myYJO3weTkTgs%2BLEjkvPhGmjoA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-0xsA8qY8uwpK9Wii%3D3oa%2B4Q_YtdHojSo-oJA5NBQ53Gg%40mail.gmail.com.

Re: [weewx-user] Re: Upgrade Database to New (WeeWX 4) Schema Method

I have questions with sections of the Wiki entry.
.
It says that I would need to edit the databinding in weewx.conf.
Modify wx_binding. When it creates the new, modified database, wee_database 
needs 
to know to use the wview_extended schema instead of the old, wview schema. 
You do this by changing the option schema in section [DataBindings] in 
weewx.conf.

However, my DataBindings are as shown in the Wiki already.

Perhaps wee_database --reconfigure took care of the entries?
Could all else but the database been upgraded at some point from when I 
installed until now and all I needed was the extended database?

I tried following the directions as given and see that I am missing some 
PATH.

gh@srvr:~# cd SQLITE_ROOT
-bash: cd: SQLITE_ROOT: No such file or directory

Wiki says:
You can either shuffle the databases around so the new database has the 
same name as the old database, or edit weewx.conf to use the new database 
name. To do the former:

It never addresses the later.

Finally, instead of allowing WeeWX to rebuild the database on start, why 
not have it done by command before starting WeeWX? If you are on a slower 
machine and have years of data, it could take some time. Some people (me 
for example) would worry that WeeWX hasn't started and try to stop WeeWX to 
review their edits and steps. Running wee_database -- rebuild-daily takes 
the guesswork out of the process.

I think I'd break the Wiki into two sections, one for the bog standard 
WeeWX install and the second for those using MySQL, Likely those with MySQL 
are more familiar with its operation.
Which begs a question. Who can edit the Wiki? How are edits approved. I 
would like to contribute, but not if it went live with no supervision.

Much more 'why' in the Wiki and I like that. I get easily confused by 
things that already exist or that fail though. Then I start reading more 
into something than I should. See me with a fresh box from Ikea sometime...

On Saturday, September 12, 2020 at 2:43:38 PM UTC-4, Tom Keffer wrote:

> This has become such a common question, I wrote a Wiki on how to do it 
> .
>  
> It's basically a long-winded version of your much more concise summary.
>
> -tk
>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4bacf1ec-3970-4e8c-a82b-655d4cf93e65o%40googlegroups.com.

[weewx-user] Re: Upgrade Database to New (WeeWX 4) Schema Method

Just to make it useful for anyone who searches this topic.
cd /home/weewx/archive(This is my path using setup.py install method)
systemctl stop weewx(I run weewx with systemd)
cp weewx.sdb weewx.sdb.old
/home/weewx/bin/wee_database --reconfigure(This may take awhile 
depending on hardware and database size)
 cp weewx.sdb_new weewx.sdb(Copies the newly created db over the 
original)
/home/weewx/bin/wee_database --rebuild-daily(This too may take awhile)
systemctl start weewx
journalctl -f(Check logs until an archive period has completed)

The entire process took less than 5 minutes on my system with 18 months of 
records.

To check if you have an upgraded database do the following from 
/home/weewx/archive
echo ".schema" | sqlite3 mydbname  | wc -l

The result should be 114 for the extended schema.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ab471600-8d9a-44ae-be22-3e033fc3ac6bo%40googlegroups.com.

[weewx-user] Re: Upgrade Database to New (WeeWX 4) Schema Method

Thanks for the test method.
I get 114, so it is upgraded.


On Saturday, September 12, 2020 at 12:33:18 PM UTC-4, vince wrote:
>
> On Saturday, September 12, 2020 at 9:10:45 AM UTC-7, G Hammer wrote:
>>
>> I wish to upgrade my existing database from the old wview to the 
>> wview_extended as there are scripts looking for fields that do not exist in 
>> the old one.
>> So, would this be the method for upgrading the database?
>>
>> Stop weewx
>> Backup the existing database
>> wee_database --reconfigure
>> wee_database --rebuld-daily
>> Copy the resulting file to the proper location/name
>> Start weewx
>>
>>
> Looks pretty good to me.  Simplest thing to do is a test.  Save your old 
> db (you want to do this anyway) and run the steps you mentioned.  Then 
> check the schema for the new updated one and verify it's using the big 
> schema.  The number of fields is far higher so it's an easy thing to check 
> for.
>
> echo ".schema" | sqlite3 mydbname  | wc -l
>
> Mine using the big schema returns a value of '114' for the above command.
> I think the original one was 50 or so (it's been forever so I forget)
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/deffb9b2-6057-4f5c-a5d6-1f62e3635503o%40googlegroups.com.

[weewx-user] Upgrade Database to New (WeeWX 4) Schema Method

I wish to upgrade my existing database from the old wview to the 
wview_extended as there are scripts looking for fields that do not exist in 
the old one.
So, would this be the method for upgrading the database?

Stop weewx
Backup the existing database
wee_database --reconfigure
wee_database --rebuld-daily
Copy the resulting file to the proper location/name
Start weewx

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a2b1d273-7acf-476f-8a14-51521449c275o%40googlegroups.com.

[weewx-user] weewx-Weather34 easyW34skinSetup runs Other PHP Run, index.php Does Not

2020-09-11 Thread G Hammer

Running Pop!_OS PHP 7.4.3 Apache 2.4 Python 3.8.2 setup.py method.

I have an identical test server and installed weewx and this template there
a few days ago. Working well.
So, today I installed to my online server.
Does not run.
I have checked and double checked the install, the permissions, etc. I'm
probably blind to whatever the issue is by now.

I can run any php from the folder the template is installed in, except for
the index.php.
The easyW34skinSetup.php runs and writes the settings file.
WeeWX is creating the w34realtime.txt

I get 500 error when I try the site. weather.ghammer.net or
weather.ghammer.net/index.php
Apache error logs show nothing.
Apache access logs only show that a 500 happened.
I have monitored the syslog with no hints.

I can use these URLs that are served from the same folder to get info on
the system/software installed.

https://weather.ghammer.net/check-fetch-times.php

This one is very detailed on the entire apache and PHP environment.
https://weather.ghammer.net/php_test.php

https://weather.ghammer.net/test.php

Then there is the setup page. Of course, you don't have a password, but it
shows that it works.

https://weather.ghammer.net/easyW34skinSetup.php

Any ideas?

--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/57269470-c46d-4c5e-aa39-aa59cc2f6d6bo%40googlegroups.com.

[weewx-user] Re: MQTT - extension / Belchertown skin / Failed connecting ....

2020-09-08 Thread G Hammer

Are you using Firefox?
That does not connect for me while Edge does.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/48237d7a-261e-4d27-9321-e512cc7a90ebo%40googlegroups.com.

[weewx-user] Re: Belchertown Skin, Websockets, Firefox Fail to Connect

2020-08-12 Thread G Hammer

Puzzling thing is, I just installed the latest version of the skin and it 
still fails in Firefox. At the same time, Pat's site loads and works fine.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/634cf414-2e3d-4534-87f9-d3ebaf3ccff3o%40googlegroups.com.

[weewx-user] Re: Installation/configuration issues (WeeWx on a Raspberry Pi4)

2020-06-17 Thread G Hammer

So, a public IP from a cell is going to be intercepted by the Pi?

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c0ef5748-0ec0-4336-8b08-ab5476f543cao%40googlegroups.com.

[weewx-user] Re: Installation/configuration issues (WeeWx on a Raspberry Pi4)

2020-06-17 Thread G Hammer

You say the PWS connects via cellular data.
That precludes using anything to capture/sniff the data.
You'll have no options except for getting a GW1000 if it supports your 
sensors.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8c0a9e19-4e8e-4018-bd22-faab3cfd3a49o%40googlegroups.com.

[weewx-user] Re: weewx and opensprinkler

2020-06-16 Thread G Hammer

Mind you, I have a pair of ASUS routers in AP mode, but even with just one I 
have not had any lost WiFi in the years I've run my Mini-8.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bca8c9c7-5c4a-4445-ba09-d78758020a9do%40googlegroups.com.

[weewx-user] Re: weewx and opensprinkler

2020-06-15 Thread G Hammer

Put me down as a happy RainMachine user.
You have the direct from WeeWX capability or if you feed data to Aeris, the 
ability to use their API to get the data.
No cloud required if you don't wish, capable if you do.

I didn't like that other commercial brands required internet to function as 
advertised. Didn't want to cobble a homebrew controller. RainMachine was 
(and is I think) my sole choice.
I have a Mini-8 but as you say it has been discontinued in favor of the 
Pro-8
https://www.rainmachine.com/products/rainmachine-pro.html

On Saturday, June 13, 2020 at 5:49:03 PM UTC-4, Xant wrote:
>
>
> Mike
>
> Agree. Greetings for those going DIY, but in this case will go turnkey as 
> well. 
>
> Per my recent research, Rachio tops most of reviews, but some complains 
> about Advertising inside own app to other company products. On the other 
> side, RainMachine owners feedback are most positive (like yourself). And... 
> extensive connectivity to HomeAssistant, WeeWX, among others, while 
> data remains local - "cloudless" (to note, the weewx link seems to be 
> written by HomeMachine own developers).
>
> RainMachine Mini-8 ($159) announced End-Of-Life, leaving only their most 
> expensive options available. But still, I may go this route...
>
> Xant
> (your neighbor at Clifton Park/NY)
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ee051e97-e466-42ac-bbaa-24eebd3fb82do%40googlegroups.com.

[weewx-user] Re: Hardware Recomendation for weewx Compatible Hardware

2020-06-05 Thread G Hammer

Look at either the Ambient Weather WS-5000 Ultrasonic Professional Smart 
Weather Station or its equivalent, the Ecowitt HP2553
If you don't wish to go the ultrasonic route, the Ecowitt GW1002 or the 
Ambient WS-2902B or WS-2000 are also nice units.
All will report wind in 16 seconds or less for the ultrasonic units.

Ecowitt has excellent support if needed. Ambient did have but with their 
recent sale, I don't know for certain.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/425bca3f-78e6-4af3-a842-9a7cc11ed58co%40googlegroups.com.

[weewx-user] Re: Account of setting up an Ambient WS-2902A with SDR and an additional sensor

2020-05-26 Thread G Hammer

Excellent write up! Thank you.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d971218a-cc63-4374-abd8-6718b5818724%40googlegroups.com.

Re: [weewx-user] Re: Belchertown 1.1

2020-05-13 Thread G Hammer

Stick with the current version and troubleshoot it. It is different and the
time spent will be useful.

On Wed, May 13, 2020, 7:14 PM Ron Sell  wrote:

> I don’t want 1.0. I just tried to install to try and troubleshoot things.
>
> On Wed, May 13, 2020 at 4:27 PM G Hammer  wrote:
>
>> I recall having that look once a while back.
>> I think I did this to correct it.
>> If it wasn't, no harm done if they are available for your Pi.
>> It looks like pyephem or if python3, python3-ephem aren't installed in
>> the second screenshot.
>>
>> Just wondering why you wish to return to v 1 though.
>>
>> Anyway, give these a try.
>>
>> sudo apt-get -y install libfreetype6-dev
>> sudo apt-get -y install libjpeg-dev
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/7ea36df9-3f25-4d20-8db7-ffe2e02eed16%40googlegroups.com
>> <https://groups.google.com/d/msgid/weewx-user/7ea36df9-3f25-4d20-8db7-ffe2e02eed16%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/AgqvlniDdLg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CABn15daaGpNsgD_%3Df-uuL%3D%2BLDhxfJ2c8hZ6UmFvizg6ZHYLQ1g%40mail.gmail.com
> <https://groups.google.com/d/msgid/weewx-user/CABn15daaGpNsgD_%3Df-uuL%3D%2BLDhxfJ2c8hZ6UmFvizg6ZHYLQ1g%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-3Se7eKyWR8_uo4Og6Rv_cZkJfQQP-Mt%3DfsLenXPi%3DFZw%40mail.gmail.com.

[weewx-user] Re: Belchertown 1.1

2020-05-13 Thread G Hammer

I recall having that look once a while back.
I think I did this to correct it.
If it wasn't, no harm done if they are available for your Pi.
It looks like pyephem or if python3, python3-ephem aren't installed in the 
second screenshot.

Just wondering why you wish to return to v 1 though.

Anyway, give these a try.

sudo apt-get -y install libfreetype6-dev
sudo apt-get -y install libjpeg-dev



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7ea36df9-3f25-4d20-8db7-ffe2e02eed16%40googlegroups.com.

Re: [weewx-user] Belchertown 1.1

2020-05-13 Thread G Hammer

Did you install the skin using wee_extension --install ?


On Tuesday, May 12, 2020 at 4:59:03 PM UTC-4, Ron Sell wrote:
>
> Thank You. Now i just cant find out why my updates to my weewx.conf wont 
> change my belchertown skin
>
> On Tue, May 12, 2020 at 4:20 PM Tom Keffer > 
> wrote:
>
>> See the documentation 
>> . Basically, you 
>> set option "enable" to false:
>>
>> [[SeasonsReport]]
>> # The SeasonsReport uses the 'Seasons' skin, which contains the
>> # images, templates and plots for the report.
>> skin = Seasons
>> enable = false
>>
>> -tk
>>
>> On Tue, May 12, 2020 at 11:52 AM Ron Sell > > wrote:
>>
>>> I started with a fresh install.
>>>
>>> My intention is to only use belchertown skin. How do I disable the 
>>> others?
>>>
>>> None of the changes i make in the weewx.conf for belchertown skin take 
>>> affect.
>>> IE: powered_by = "WeatherFlow"
>>>
>>> this never shows on the skin:
>>>
>>>
>>>
>>>
>>> On Tue, May 12, 2020 at 2:29 PM Tom Keffer >> > wrote:
>>>
 I'm not sure what you're trying to do here, but any particular reason 
 why you're running both weewxd *and* wee_reports? Usually, it's one or 
 the other.

 And, you're running both the Seasons report *and* the Belchertown 
 report, albeit to different directories. Is that your intention?

 Finally, when you say, "none of my changes take affect" what changes 
 are you referring to? The change from the old system? Adding something to 
 the new system?

 Remote debugging is tough, so it helps to be very explicit about what 
 you mean, and to supply lots of information.

 -tk


 On Tue, May 12, 2020 at 11:15 AM Ron Sell >>> > wrote:

> Attached the log file
>
> On Tue, May 12, 2020 at 2:02 PM Tom Keffer  > wrote:
>
>> Impossible to say without seeing the log. See *Help! Posting to 
>> weewx-user *.
>>
>> On Tue, May 12, 2020 at 10:59 AM Ron Sell > > wrote:
>>
>>> I am trying to re create my Weewx on a new server. I am having the 
>>> hardest time. When I make changes to the weewx.conf, restart service 
>>> and 
>>> run sudo weewx_reports none of my changes take affect. What am I 
>>> missing?
>>>
>>> [[Belchertown]]
>>>
>>> HTML_ROOT = /var/www/html
>>>
>>> skin = Belchertown
>>>
>>> [[[Extras]]]
>>>
>>> belchertown_root_url = http://10.0.0.1 
>>> 81
>>>
>>>   # footer_copyright_text = BelchertownWeather.com
>>>
>>> forecast_enabled = 1
>>>
>>> forecast_api_id = x
>>>
>>> forecast_api_secret = x
>>>
>>> forecast_units = "us"
>>>
>>> forecast_stale = forecast_stale
>>>
>>> earthquake_enabled = 0
>>>
>>> twitterenabled = 0
>>>
>>> webpage_autorefresh = 20
>>>
>>>   #mqtt_websockets_enabled = 1
>>>
>>>#   mqtt_websockets_host = "10.0.0.32"
>>>
>>>#   mqtt_websockets_port = 9001
>>>
>>>#   mqtt_websockets_topic = "weather/#"
>>>
>>> disconnect_live_website_visitor = 0
>>>
>>> show_apptemp = 1
>>>
>>>   #  show_windrun = 1
>>>
>>> station_observations = barometer, dewpoint, outHumidity, 
>>> cloudbase, rainWithRainRate, UV, radiation
>>>
>>> theme = auto
>>>
>>> reload_hook_images = 1
>>>
>>> reload_images_hook_af = 60
>>>
>>> show_last_updated_alert = 1
>>>
>>> last_updated_alert_threshold = 1800
>>>
>>> footer_disclaimer_text = "Weather"
>>>
>>> footer_copyright_text = " "
>>>
>>> powered_by = "WeatherFlow"
>>>
>>> about_page_header = "About"
>>>
>>> home_page_header = "Weather Conditions"
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, 
>>> send an email to weewx...@googlegroups.com .
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/7b73b2c5-7d4a-4b90-8543-32a823497dc8%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>> -- 
>> You received this message because you are subscribed to the Google 
>> Groups "weewx-user" group.
>> To unsubscribe from this group and stop receiving em

[weewx-user] Re: Belchertown skin 1.1 released!

2020-05-08 Thread G Hammer

Just saw my first alert and wanted to say I like the new appearance of the 
full alert.
Plus, with this alert source, I no longer get alerts from two or more 
areas. I'm on the boundary for a couple of zones it seems.


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c3fa4296-c0be-41b1-a379-699946bda877%40googlegroups.com.

Re: [weewx-user] Re: No module named 'paho'

Glad to hear it. Enjoy.

On Mon, May 4, 2020, 5:37 PM David Schmidt 
wrote:

> All right, removed all of python3 and with python2 all runs fine now,
> thanks for the help!
>
>
>
> On Monday, May 4, 2020 at 7:35:03 PM UTC+2, G Hammer wrote:
>>
>> If you are wanting python2 then run everything by using it explicitly.
>> There are examples in the setup.py guide
>>
>>
>> On Mon, May 4, 2020, 1:27 PM David Schmidt  wrote:
>>
>>> Interesting, there might be a mess up there at this point!
>>>
>>> Thanks for pointing that out.
>>>
>>>
>>> On Mon, May 4, 2020, 19:21 G Hammer  wrote:
>>>
>>>> All your posted errors say python3
>>>>
>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>
>>>>
>>>>
>>>> On Monday, May 4, 2020 at 1:02:11 PM UTC-4, David Schmidt wrote:
>>>>>
>>>>> Hi there,
>>>>>
>>>>> I followed the instructions from weewx. Installed all 2.7 python.
>>>>> Weird isn't it?
>>>>>
>>>>> Any further idea to debug?
>>>>>
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020, 16:03 G Hammer  wrote:
>>>>>
>>>>>> Perhaps you installed the python2 version instead of the python3
>>>>>> version.
>>>>>>
>>>>>> On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David Schmidt wrote:
>>>>>>>
>>>>>>> Hi there,
>>>>>>> I installed paho-mqtt et all as per this guide:
>>>>>>> https://github.com/weewx/weewx/wiki/mqtt
>>>>>>> Now when I start the service I get this:
>>>>>>>
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: Caught unrecoverable exception:
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   No module named 'paho'
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   Traceback (most recent call last):
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: File "/usr/share/weewx/weewxd", line 148, in main
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   engine = weewx.engine.StdEngine(config_dict)
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 75, 
>>>>>>> $
>>>>>>> n __init__
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   self.loadServices(config_dict)
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 138,
>>>>>>> in loadServices
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   obj = 
>>>>>>> weeutil.weeutil.get_object(svc)(self,confi$
>>>>>>> _dict)
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: File "/usr/share/weewx/weeutil/weeutil.py", line 
>>>>>>> 1$
>>>>>>> 93, in get_object
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   mod = __import__(module)
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__: File "/usr/share/weewx/user/mqtt.py", line 94, in<
>>>>>>> module>
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   import paho.mqtt.client as mqtt
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>>>> __main__:   ModuleNotFoundError: No module named 'paho'
>>>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>

Re: [weewx-user] Re: No module named 'paho'

If you are wanting python2 then run everything by using it explicitly.
There are examples in the setup.py guide


On Mon, May 4, 2020, 1:27 PM David Schmidt 
wrote:

> Interesting, there might be a mess up there at this point!
>
> Thanks for pointing that out.
>
>
> On Mon, May 4, 2020, 19:21 G Hammer  wrote:
>
>> All your posted errors say python3
>>
>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>
>>
>>
>> On Monday, May 4, 2020 at 1:02:11 PM UTC-4, David Schmidt wrote:
>>>
>>> Hi there,
>>>
>>> I followed the instructions from weewx. Installed all 2.7 python.
>>> Weird isn't it?
>>>
>>> Any further idea to debug?
>>>
>>>
>>>
>>> On Mon, May 4, 2020, 16:03 G Hammer  wrote:
>>>
>>>> Perhaps you installed the python2 version instead of the python3
>>>> version.
>>>>
>>>> On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David Schmidt wrote:
>>>>>
>>>>> Hi there,
>>>>> I installed paho-mqtt et all as per this guide:
>>>>> https://github.com/weewx/weewx/wiki/mqtt
>>>>> Now when I start the service I get this:
>>>>>
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: Caught unrecoverable exception:
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   No module named 'paho'
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   Traceback (most recent call last):
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: File "/usr/share/weewx/weewxd", line 148, in main
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   engine = weewx.engine.StdEngine(config_dict)
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 75, $
>>>>> n __init__
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   self.loadServices(config_dict)
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 138,
>>>>> in loadServices
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   obj = weeutil.weeutil.get_object(svc)(self,confi$
>>>>> _dict)
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: File "/usr/share/weewx/weeutil/weeutil.py", line 1$
>>>>> 93, in get_object
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   mod = __import__(module)
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__: File "/usr/share/weewx/user/mqtt.py", line 94, in<
>>>>> module>
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   import paho.mqtt.client as mqtt
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   ModuleNotFoundError: No module named 'paho'
>>>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>>>>> __main__:   Exiting.
>>>>>
>>>>> What could I have missed here?
>>>>>
>>>>> Thanks
>>>>> David
>>>>>
>>>> --
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "weewx-user" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/weewx-user/cZNN3FBwqCs/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> weewx...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/fe17e87b-3157-43fd-a998-8d5c377d0c36%40googlegroups.com
>>>> <https://groups.google.com/d/msgid/weewx-user/fe17e87b-3157-43fd-a998-8d5c377d0c36%40googlegr

Re: [weewx-user] Re: No module named 'paho'

All your posted errors say python3

May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL



On Monday, May 4, 2020 at 1:02:11 PM UTC-4, David Schmidt wrote:
>
> Hi there,
>
> I followed the instructions from weewx. Installed all 2.7 python. 
> Weird isn't it?
>
> Any further idea to debug?
>
>
>
> On Mon, May 4, 2020, 16:03 G Hammer > 
> wrote:
>
>> Perhaps you installed the python2 version instead of the python3 version.
>>
>> On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David Schmidt wrote:
>>>
>>> Hi there,
>>> I installed paho-mqtt et all as per this guide: 
>>> https://github.com/weewx/weewx/wiki/mqtt
>>> Now when I start the service I get this:
>>>
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL __main__: 
>>> Caught unrecoverable exception:
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   No module named 'paho'   
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   Traceback (most recent call last):   
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__: File "/usr/share/weewx/weewxd", line 148, in main  
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   engine = weewx.engine.StdEngine(config_dict)
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 75, $
>>> n __init__
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   self.loadServices(config_dict)
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__: File "/usr/share/weewx/weewx/engine.py", line 138, 
>>> in loadServices
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   obj = weeutil.weeutil.get_object(svc)(self,confi$
>>> _dict)
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__: File "/usr/share/weewx/weeutil/weeutil.py", line 1$
>>> 93, in get_object
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   mod = __import__(module)
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__: File "/usr/share/weewx/user/mqtt.py", line 94, in<
>>> module>
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   import paho.mqtt.client as mqtt
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   ModuleNotFoundError: No module named 'paho'
>>> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
>>> __main__:   Exiting.
>>>
>>> What could I have missed here?
>>>
>>> Thanks
>>> David
>>>
>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/weewx-user/cZNN3FBwqCs/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/fe17e87b-3157-43fd-a998-8d5c377d0c36%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/fe17e87b-3157-43fd-a998-8d5c377d0c36%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2c19e416-5397-4e2f-aa08-5f8170251f4e%40googlegroups.com.

[weewx-user] Re: No module named 'paho'

Perhaps you installed the python2 version instead of the python3 version.

On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David Schmidt wrote:
>
> Hi there,
> I installed paho-mqtt et all as per this guide: 
> https://github.com/weewx/weewx/wiki/mqtt
> Now when I start the service I get this:
>
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL __main__: 
> Caught unrecoverable exception:
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   No module named 'paho'   
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   Traceback (most recent call last):   
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__: File "/usr/share/weewx/weewxd", line 148, in main  
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   engine = weewx.engine.StdEngine(config_dict)
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__: File "/usr/share/weewx/weewx/engine.py", line 75, $
> n __init__
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   self.loadServices(config_dict)
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__: File "/usr/share/weewx/weewx/engine.py", line 138, 
> in loadServices
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   obj = weeutil.weeutil.get_object(svc)(self,confi$
> _dict)
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__: File "/usr/share/weewx/weeutil/weeutil.py", line 1$
> 93, in get_object
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   mod = __import__(module)
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__: File "/usr/share/weewx/user/mqtt.py", line 94, in<
> module>
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   import paho.mqtt.client as mqtt
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   ModuleNotFoundError: No module named 'paho'
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL 
> __main__:   Exiting.
>
> What could I have missed here?
>
> Thanks
> David
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fe17e87b-3157-43fd-a998-8d5c377d0c36%40googlegroups.com.

[weewx-user] Re: Version 4.0 is (finally) here!

2020-05-01 Thread G Hammer

There is an extra space in the default weewx4.0.0.conf file
May or may not affect anything but after my go around with spaces vs 
python3, thought I'd mention it.


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2e1e3e75-bcc6-4b88-af15-43d28b6014d7%40googlegroups.com.

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

2020-05-01 Thread G Hammer



On Friday, May 1, 2020 at 10:02:21 AM UTC-4, Max Gutberlet wrote:
>
> Reporting success(ish)
>
> Spend another 8 hours playing with this, got it to work but not without 
> caveats:
>
> Did a squeaky clean install based on Matts new 4.0 deb package and using 
> the 0.54b interceptor with  the latest GIT commit on the PASSKEY.
>
> - listen mode works using ecowitt-client - that was a RTFM error where the 
> /data/report/ path for the web-call on the station was changed - setting
>   this back to the standard path made this work - so happily logging data 
> again. Btw, my system is running EasyWeather1.4.9 firmware.
>
>
Glad to hear it works as ecowitt-client, I was stumped.

As for the sniff, Ubuntu 20 has many functions supplied by a snap. Are you 
installing via apt or via pip? May (or may not) make a difference.
Take a look at how Tom installs to localenv;
https://groups.google.com/d/msg/weewx-user/yG0aTuyosOc/Vo4bvUBNAAAJ

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/934e84b3-7dcf-48a6-8891-01e699af7330%40googlegroups.com.

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

2020-04-29 Thread G Hammer

I ran debug logging for the interceptor driver and have attached it here 
for you to compare.
BTW- It is a nice feature of WeeWX 4 to have the flexible logging available.

My example:
# Set logging for Interceptor to debug
[Logging]
  [[loggers]]
[[[user.interceptor]]]
  level = DEBUG
  handlers = syslog,
  propagate = 0

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c4db19ed-2b86-4f5d-98a6-6e7836afcf94%40googlegroups.com.
Apr 29 13:41:20 srvr weewxd[5142]: weewx[5142] INFO __main__: Initializing 
weewx version 4.0.0b18
Apr 29 13:41:20 srvr weewxd[5142]: weewx[5142] INFO __main__: Using Python 
3.6.9 (default, Apr 18 2020, 01:56:04)
   [GCC 8.4.0]
Apr 29 13:41:20 srvr weewxd[5142]: weewx[5142] INFO __main__: Platform 
Linux-5.3.0-51-generic-x86_64-with-LinuxMint-19.3-tricia
Apr 29 13:41:20 srvr weewxd[5142]: weewx[5142] INFO __main__: Locale is 
'en_US.UTF-8'
Apr 29 13:41:20 srvr weewxd[5142]: weewx[5142] INFO __main__: PID file is 
/var/run/weewx.pid
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO __main__: Using 
configuration file /home/weewx/weewx.conf
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.engine: Loading 
station type Interceptor (user.interceptor)
Apr 29 13:41:20 srvr systemd[1]: weewx.service: Supervising process 5146 which 
is not our child. We'll most likely not notice when it exits.
Apr 29 13:41:20 srvr systemd[1]: Started weewx weather system.
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO user.interceptor: driver 
version is 0.54b
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO user.interceptor: device 
type: fineoffset-bridge
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO user.interceptor: mode is 
listen
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO user.interceptor: listen on 
:8000
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO user.interceptor: sensor 
map: {'pressure': 'pressure', 'barometer': 'barometer', 'outHumidity': 
'humidity_out', 'inHumidity': 'humidity_in', 'outTemp': 'temperature_out', 
'inTemp': 'temperature_in', 'windSpeed': 'wind_speed', 'windGust': 'wind_gust', 
'windDir': 'wind_dir', 'windGustDir': 'wind_gust_dir', 'radiation': 
'solar_radiation', 'dewpoint': 'dewpoint', 'windchill': 'windchill', 'rain': 
'rain', 'rainRate': 'rain_rate', 'UV': 'uv', 'txBatteryStatus': 'wh26_battery', 
'extraTemp1': 'temperature_1', 'extraTemp2': 'temperature_2', 'extraTemp3': 
'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2': 'humidity_2', 
'soilTemp1': 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2', 
'soilMoist1': 'soil_moisture_1', 'soilMoist2': 'soil_moisture_2', 'soilMoist3': 
'soil_moisture_3', 'soilMoist4': 'soil_moisture_4', 'leafWet1': 
'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5', 'extraTemp4': 
'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6': 'temperature_6', 
'extraTemp7': 'temperature_7', 'extraTemp8': 'temperature_8', 'extraHumid3': 
'humidity_3', 'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5', 
'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7', 'extraHumid8': 
'humidity_8', 'soilTemp3': 'soil_temperature_3', 'soilTemp4': 
'soil_temperature_4', 'windBatteryStatus': 'wh68_battery', 'supplyVoltage': 
'wh40_battery'}
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] DEBUG user.interceptor: start 
tcp server
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.engine: StdConvert 
target unit is 0x1
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.wxservices: The 
following values will be calculated: pressure=prefer_hardware, 
barometer=prefer_hardware, altimeter=prefer_hardware, 
windchill=prefer_hardware, heatindex=prefer_hardware, dewpoint=prefer_hardware, 
inDewpoint=prefer_hardware, rainRate=prefer_hardware, 
maxSolarRad=prefer_hardware, cloudbase=prefer_hardware, 
humidex=prefer_hardware, appTemp=prefer_hardware, ET=prefer_hardware, 
windrun=prefer_hardware
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.wxservices: The 
following algorithms will be used for calculations: altimeter=aaASOS, 
maxSolarRad=RS
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.engine: Archive will 
use data binding wx_binding
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.engine: Record 
generation will be attempted in 'software'
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.engine: Using archive 
interval of 300 seconds (software record generation)
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.restx: 
StationRegistry: Station will be registered.
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.restx: Wunderground: 
Posting not enabled.
Apr 29 13:41:20 srvr weewxd[5146]: weewx[5146] INFO weewx.restx: PWSWe

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

2020-04-29 Thread G Hammer

You may wish to install using the setup.py method. 
I think that the deb install is not complete as yet. Plus, it looks like it 
is -3 vs your -1 at this time.

https://github.com/weewx/weewx/wiki/weewx4-compatibility-matrix

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1bb67d12-42a3-4ce3-9b65-738812646b7c%40googlegroups.com.

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

2020-04-29 Thread G Hammer

I'm running Python 3.6.9 on Linux Mint 19.3 kernel 5.3.0-46



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bda98c86-a355-4840-9a8a-e769e0b28ecd%40googlegroups.com.

[weewx-user] Re: WeeWX 4.0.0b18 Interceptor 0.54b PASSKEY Error

This is corrected by Gary's pull request
"Ensure Handler always returns a string"



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/5e43655f-0d57-4986-bf20-1ac46ec5a1e9%40googlegroups.com.

[weewx-user] WeeWX 4.0.0b18 Interceptor 0.54b PASSKEY Error

WeeWX 4.0.0b18 setup.py install method on Mint 19.3
Interceptor  0.54b
Python 3
Ecowitt GW1000

I'm getting this logged with every packet sent from the GW1000, about every 
16 seconds.
No other errors recorded.

 weewx[12159] INFO user.interceptor: unrecognized parameter b
'PASSKEY=


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c60e89c3-8b00-4f19-96cf-e8e96ab2b4f9%40googlegroups.com.

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

This is what is in my weewx.conf, seems a little different to yours.
[Interceptor]
# This section is for the network traffic interceptor driver.

# The driver to use:
driver = user.interceptor

# Specify the hardware device to capture.  Options include:
#   acurite-bridge - acurite internet bridge
#   observer - fine offset WH2600/HP1000/HP1003, aka 'observer'
#   lw30x - oregon scientific LW301/LW302
#   lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
device_type = fineoffset-bridge
port = 8000
[[sensor_map_extensions]]
windBatteryStatus = wh68_battery
txBatteryStatus = wh26_battery
supplyVoltage = wh40_battery






On Tuesday, April 28, 2020 at 2:08:55 PM UTC-4, Max Gutberlet wrote:
>
> LOL - literally the first thing I checked :-) Yep, the packets (in 
> wireshark) are still comming in on eth0.
>
> I did some more investigation, this is starting to look like a python3.8 
> with interceptor problem. My station actually talks ecowitt as well, so I 
> configured
> it to send ecowitt to my server and started interceptor in listen mode für 
> ecowitt as a standalone using
>
> PYTHONPATH=bin python3 bin/user/interceptor.py --device=ecowitt-client 
> --mode=listen --port=9988
>
> same "no data received" behaviour and you have to actually kill the 
> process, a control-c does not stop it which also hints at something 
> "hanging".
>
> I am currently playing with an alternative ecowitt implementation 
> https://github.com/iz0qwm/ecowitt_http_gateway but that also gives me a 
> lot of 
> python errors on identation :-( 
>
> Any help greatly appreciated ! I still hope I am "just" misconfiguring 
> something.
> Thx
> Max
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0d459179-d459-46d0-887a-b0f9c840c9ae%40googlegroups.com.

[weewx-user] Re: python3 with weewx4 and interceptor 0.54

Are you certain the upgrade left your interface as eth0


On Tuesday, April 28, 2020 at 9:50:01 AM UTC-4, Max Gutberlet wrote:
>
> Gents, did upgrade to Ubuntu 20.04 which is now python3 based so it broke 
> my python2 based weewx/interceptor config.
>
> I did a clean install using python3-weewx_4.0.0b18-1_all.deb which AFAIK 
> is the only one supporting python3. Some hickups
> around necessary packages (python3-usb ; -serial and -obj) but nothing 
> major.
>
> Then installed latest weewx-interceptor - again some hickups to get the 
> pcap running but again nothing major. A quick pip install
> solved that. I am doing wu interception.
>
> Extension NameVersion   Description
> interceptor   0.54  Capture weather data from HTTP requests
>
> Now the service is running, but I am not seeing any packets being captured:
>
> Apr 28 15:27:52 server weewx[597240] message repeated 4 times: [ DEBUG 
> user.interceptor: empty queue]
> Apr 28 15:28:02 server weewx[597240] DEBUG user.interceptor: empty queue
> Apr 28 15:28:12 server weewx[597240] DEBUG user.interceptor: empty queue
> Apr 28 15:29:12 server weewx[597240] message repeated 6 times: [ DEBUG 
> user.interceptor: empty queue]
> Apr 28 15:29:22 server weewx[597240] DEBUG user.interceptor: empty queue
> Apr 28 15:29:32 server weewx[597240] DEBUG user.interceptor: empty queue
> Apr 28 15:29:42 server weewx[597240] DEBUG user.interceptor: empty queue
>
> Just to be 200% I used wireshark to see if the device is still sending 
> packages and it is fine, sending a packet
> every minute up to WU.
>
> My interceptor config:
>
> [Interceptor]
> driver = user.interceptor
> device_type = wu-client
> mode = sniff
> iface = eth0
> pcap_filter = src 192.168.0.68 and dst port 80
> promiscuous = True
>
> I tried both promiscuous True and False - no change.
>
> Any ideas ? Thanks in advance !
> CU
> Max
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/24d9b5e3-6807-4a4c-b677-c7d9b168ffd3%40googlegroups.com.

Re: [weewx-user] Thanks a Lot Darksky (NOT!!)

2020-04-27 Thread G Hammer

I think I like this alert better then being taken to a different page.

On Monday, April 27, 2020 at 1:59:53 PM UTC-4, Pat wrote:
>
> I'd like to upgrade to bootstrap 4, but it did some very bad things to the 
> charts. I've got it on the list of things. 
>
> The new alerts are in-line with the skin now just like the almanac popup, 
> no longer an external link. Aeris does not provide a link to their source, 
> only the alert details. So I show it in the skin now. Here's an example 
> attached.
>
>
>
> On Monday, April 27, 2020 at 1:44:43 PM UTC-4, G Hammer wrote:
>>
>> The new bootstrap is an improvement too I think.
>> Prior, I'd get a failure on the first report cycle, then next cycle the 
>> file would be downloaded and all was well.
>> This time, the file was downloaded first cycle.
>>
>> No alerts here, so I'll have to see if Aeris is better about my location 
>> straddling two warning areas.
>>
>> On Monday, April 27, 2020 at 1:25:17 PM UTC-4, Pat wrote:
>>>
>>> Awesome! I just pushed 1.2b3 not too long ago too (haven't really told 
>>> anyone). Glad to see it's working for you!
>>>
>>> On Monday, April 27, 2020 at 1:24:10 PM UTC-4, G Hammer wrote:
>>>>
>>>> Running 1.2b3 all is well on my install.
>>>> WeeWX 4.0.0b18
>>>> Python 3
>>>>
>>>>
>>>> On Sunday, April 26, 2020 at 11:25:56 AM UTC-4, Pat wrote:
>>>>>
>>>>> I've incorporated Aeris Weather into the Belchertown 1.2b2 beta skin. 
>>>>> Details can be found here for anyone who wants to try it out: 
>>>>> https://github.com/poblabs/weewx-belchertown/tree/development
>>>>>
>>>>> Be sure to read the readme on settings and getting Aeris setup. 
>>>>>
>>>>> On Friday, April 24, 2020 at 2:05:44 PM UTC-4, galfert wrote:
>>>>>>
>>>>>> The free Aeris Weather account is not advertised. You have to use the 
>>>>>> link I provided to get in on the special "Contributor account" only for 
>>>>>> those that contribute with their station to PWSweather.com.
>>>>>>
>>>>>> This link:
>>>>>> https://www.aerisweather.com/signup/pws/ 
>>>>>> <https://www.google.com/url?q=https%3A%2F%2Fwww.aerisweather.com%2Fsignup%2Fpws%2F&sa=D&sntz=1&usg=AFQjCNGrtQkMhL_3fuMz0WA0hFm8vjaQKg>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Friday, April 24, 2020 at 1:11:49 PM UTC-4, Philip Kutzenco wrote:
>>>>>>>
>>>>>>> Hmm. I think galfert is correct. I believe as long as your weewx 
>>>>>>> implementation is sending "quality data to pwsweather.com monthly, 
>>>>>>> use of the API is free. Sorry for the false alarm.
>>>>>>>
>>>>>>> On Friday, April 24, 2020 at 12:49:03 PM UTC-4, Philip Kutzenco 
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> I signed up. However, it looks to me that having a PWSweather 
>>>>>>>> account lets you get an Aeris Weather account (which is linked), but 
>>>>>>>> when I 
>>>>>>>> go to the API site with that account, they only offer a 30 day free 
>>>>>>>> trial. 
>>>>>>>> After that there is a monthly or annual cost.for the API subscription. 
>>>>>>>> Am I 
>>>>>>>> missing something?
>>>>>>>>
>>>>>>>> On Thursday, April 23, 2020 at 1:25:18 PM UTC-4, galfert wrote:
>>>>>>>>>
>>>>>>>>> Aeris Weather seems to be a replacement for Dark Sky that people 
>>>>>>>>> are going with. If you upload to PWSweather then you can get a free 
>>>>>>>>> API key 
>>>>>>>>> to Aeris Weather.
>>>>>>>>> https://www.aerisweather.com/signup/pws/ 
>>>>>>>>> <https://www.google.com/url?q=https%3A%2F%2Fwww.aerisweather.com%2Fsignup%2Fpws%2F&sa=D&sntz=1&usg=AFQjCNGrtQkMhL_3fuMz0WA0hFm8vjaQKg>
>>>>>>>>>
>>>>>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0dd79b84-1bd6-475f-b578-b921ea3509c9%40googlegroups.com.

Re: [weewx-user] Thanks a Lot Darksky (NOT!!)

2020-04-27 Thread G Hammer

The new bootstrap is an improvement too I think.
Prior, I'd get a failure on the first report cycle, then next cycle the 
file would be downloaded and all was well.
This time, the file was downloaded first cycle.

No alerts here, so I'll have to see if Aeris is better about my location 
straddling two warning areas.

On Monday, April 27, 2020 at 1:25:17 PM UTC-4, Pat wrote:
>
> Awesome! I just pushed 1.2b3 not too long ago too (haven't really told 
> anyone). Glad to see it's working for you!
>
> On Monday, April 27, 2020 at 1:24:10 PM UTC-4, G Hammer wrote:
>>
>> Running 1.2b3 all is well on my install.
>> WeeWX 4.0.0b18
>> Python 3
>>
>>
>> On Sunday, April 26, 2020 at 11:25:56 AM UTC-4, Pat wrote:
>>>
>>> I've incorporated Aeris Weather into the Belchertown 1.2b2 beta skin. 
>>> Details can be found here for anyone who wants to try it out: 
>>> https://github.com/poblabs/weewx-belchertown/tree/development
>>>
>>> Be sure to read the readme on settings and getting Aeris setup. 
>>>
>>> On Friday, April 24, 2020 at 2:05:44 PM UTC-4, galfert wrote:
>>>>
>>>> The free Aeris Weather account is not advertised. You have to use the 
>>>> link I provided to get in on the special "Contributor account" only for 
>>>> those that contribute with their station to PWSweather.com.
>>>>
>>>> This link:
>>>> https://www.aerisweather.com/signup/pws/ 
>>>> <https://www.google.com/url?q=https%3A%2F%2Fwww.aerisweather.com%2Fsignup%2Fpws%2F&sa=D&sntz=1&usg=AFQjCNGrtQkMhL_3fuMz0WA0hFm8vjaQKg>
>>>>
>>>>
>>>>
>>>> On Friday, April 24, 2020 at 1:11:49 PM UTC-4, Philip Kutzenco wrote:
>>>>>
>>>>> Hmm. I think galfert is correct. I believe as long as your weewx 
>>>>> implementation is sending "quality data to pwsweather.com monthly, 
>>>>> use of the API is free. Sorry for the false alarm.
>>>>>
>>>>> On Friday, April 24, 2020 at 12:49:03 PM UTC-4, Philip Kutzenco wrote:
>>>>>>
>>>>>> I signed up. However, it looks to me that having a PWSweather account 
>>>>>> lets you get an Aeris Weather account (which is linked), but when I go 
>>>>>> to 
>>>>>> the API site with that account, they only offer a 30 day free trial. 
>>>>>> After 
>>>>>> that there is a monthly or annual cost.for the API subscription. Am I 
>>>>>> missing something?
>>>>>>
>>>>>> On Thursday, April 23, 2020 at 1:25:18 PM UTC-4, galfert wrote:
>>>>>>>
>>>>>>> Aeris Weather seems to be a replacement for Dark Sky that people are 
>>>>>>> going with. If you upload to PWSweather then you can get a free API key 
>>>>>>> to 
>>>>>>> Aeris Weather.
>>>>>>> https://www.aerisweather.com/signup/pws/ 
>>>>>>> <https://www.google.com/url?q=https%3A%2F%2Fwww.aerisweather.com%2Fsignup%2Fpws%2F&sa=D&sntz=1&usg=AFQjCNGrtQkMhL_3fuMz0WA0hFm8vjaQKg>
>>>>>>>
>>>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c6fb0bf7-92a5-46af-a66c-312d200ac3d3%40googlegroups.com.

Re: [weewx-user] Thanks a Lot Darksky (NOT!!)

2020-04-27 Thread G Hammer

Running 1.2b3 all is well on my install.
WeeWX 4.0.0b18
Python 3


On Sunday, April 26, 2020 at 11:25:56 AM UTC-4, Pat wrote:
>
> I've incorporated Aeris Weather into the Belchertown 1.2b2 beta skin. 
> Details can be found here for anyone who wants to try it out: 
> https://github.com/poblabs/weewx-belchertown/tree/development
>
> Be sure to read the readme on settings and getting Aeris setup. 
>
> On Friday, April 24, 2020 at 2:05:44 PM UTC-4, galfert wrote:
>>
>> The free Aeris Weather account is not advertised. You have to use the 
>> link I provided to get in on the special "Contributor account" only for 
>> those that contribute with their station to PWSweather.com.
>>
>> This link:
>> https://www.aerisweather.com/signup/pws/ 
>> 
>>
>>
>>
>> On Friday, April 24, 2020 at 1:11:49 PM UTC-4, Philip Kutzenco wrote:
>>>
>>> Hmm. I think galfert is correct. I believe as long as your weewx 
>>> implementation is sending "quality data to pwsweather.com monthly, use 
>>> of the API is free. Sorry for the false alarm.
>>>
>>> On Friday, April 24, 2020 at 12:49:03 PM UTC-4, Philip Kutzenco wrote:

 I signed up. However, it looks to me that having a PWSweather account 
 lets you get an Aeris Weather account (which is linked), but when I go to 
 the API site with that account, they only offer a 30 day free trial. After 
 that there is a monthly or annual cost.for the API subscription. Am I 
 missing something?

 On Thursday, April 23, 2020 at 1:25:18 PM UTC-4, galfert wrote:
>
> Aeris Weather seems to be a replacement for Dark Sky that people are 
> going with. If you upload to PWSweather then you can get a free API key 
> to 
> Aeris Weather.
> https://www.aerisweather.com/signup/pws/ 
> 
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/41d6bc8e-87de-4224-b7a8-92802c743425%40googlegroups.com.

[weewx-user] Re: Belchertown skin 1.1 released!

2020-04-09 Thread G Hammer

Upgraded from a previous 1.1 beta fine here.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/033a99d1-69b3-4b22-819e-8e463854b54c%40googlegroups.com.

Re: [weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-08 Thread G Hammer

Sounds like a plan.

On Wed, Apr 8, 2020, 10:31 AM Pat  wrote:

> Think I'll release 1.1 as it stands right now as soon as I can, then work
> on OWM as part of the update for 1.2 and retire DarkSky in the skin for 1.2.
>
>
> On Tuesday, April 7, 2020 at 10:01:21 PM UTC-4, Xant wrote:
>>
>>
>> Colin
>>
>> I honor that! And, indeed, brought a smile in my face! (we need that good
>> humor spirit nowadays...)
>>
>> Either one is fine...
>>
>> BTW, Pat can not have a good night sleep he has a newborn...  :
>>
>> X
>>
>>
>> On Tuesday, April 7, 2020 at 9:41:40 PM UTC-4, Colin Larsen wrote:
>>>
>>> If there is a vote going I like OWM :) Good luck with that sleep thing
>>> pat!
>>>
>>> Cheers
>>> Colin
>>>
>>> On Wed, 8 Apr 2020 at 13:32, G Hammer  wrote:
>>>
>>>> 3AM is a great time to introduce them to coding 😉
>>>>
>>>> On Tue, Apr 7, 2020, 9:30 PM Pat  wrote:
>>>>
>>>>> Right. OWM is more of a drop in replacement so I'm leaning that way.
>>>>>
>>>>> Still, this all requires me to get some spare time and a full night's
>>>>> sleep. Newborns aren't very cooperative with their parents hobbies :-)
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to a topic in the
>>>>> Google Groups "weewx-user" group.
>>>>> To unsubscribe from this topic, visit
>>>>> https://groups.google.com/d/topic/weewx-user/m_47lX0fsIM/unsubscribe.
>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>> weewx...@googlegroups.com.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/ae476015-8d47-4be0-87e6-20ed71685837%40googlegroups.com
>>>>> .
>>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/CALBRR-0%2B%3D%3DH2pmmDgVBH%2BhyD%2B-7UOP-_QAoWuwu3F9Eqr4zwiw%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/weewx-user/CALBRR-0%2B%3D%3DH2pmmDgVBH%2BhyD%2B-7UOP-_QAoWuwu3F9Eqr4zwiw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/m_47lX0fsIM/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/5ab62903-2246-4009-ba93-361b242aee11%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/5ab62903-2246-4009-ba93-361b242aee11%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-3d7YyudWGsnzfV19jgV6wWv8HdWYB1keUXOVxAt7hESg%40mail.gmail.com.

Re: [weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-07 Thread G Hammer

3AM is a great time to introduce them to coding 😉

On Tue, Apr 7, 2020, 9:30 PM Pat  wrote:

> Right. OWM is more of a drop in replacement so I'm leaning that way.
>
> Still, this all requires me to get some spare time and a full night's
> sleep. Newborns aren't very cooperative with their parents hobbies :-)
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/m_47lX0fsIM/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ae476015-8d47-4be0-87e6-20ed71685837%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-0%2B%3D%3DH2pmmDgVBH%2BhyD%2B-7UOP-_QAoWuwu3F9Eqr4zwiw%40mail.gmail.com.

Re: [weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-07 Thread G Hammer

For me, I have API keys that I keep track of, acquire when needed. It's a
one off thing.

OWM can use your coordinates which may produce better results for some. For
example, I've lived where you picked a distant city for a forecast, unless
you knew the local airport code.

They seem to have a 7 day product in the free tier now along with the 5.

They have translation and it seems to support metric or imperial per
measurement. Doesn't the UK mix MPH with C?

It would seem easier to move to OWM than to create and maintain all that
will be needed with yr.no




On Tue, Apr 7, 2020, 9:05 PM Pat  wrote:

> I understand your point and that's why I keep flip flipping. I like the
> idea of no API key to maintain.
>
> OWM is more of a drop in replacement which makes migrating the skin a bit
> easier.
>
> YR would require unit conversions, xml parsing (small rewrite since I'm
> parsing json today) and yr doesn't appear to show text for the conditions.
> (e.g. Snow, Mostly Cloudy) If they do it looks English only so there would
> need to be language translations. Something I'm not fond of maintaining in
> the skin.
>
> YR also require you to know your geoname to work. Whereas OWM can use
> lat/long.
>
> So if YR is more appealing then we have to document how to find your
> geoname (not difficult)... Have no conditions text not forecast text... and
> do unit conversions.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/m_47lX0fsIM/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ba4a4af4-ca6e-4806-8082-f73e8575dd41%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-1E%3DY9XgFzxqt1JR%3DPJniigz7gEzXW0FFhYzgzxYo0RHg%40mail.gmail.com.

[weewx-user] PID File Location

2020-04-06 Thread G Hammer

I run Manjaro (Arch based) and saw this entry in the system log:

Apr 06 11:10:02 srvr systemd[1]: /etc/systemd/system/weewx.service:12: 
PIDFile= references a path below legacy directory /var/run/, updating 
/var/run/weewx.pid → /run/weewx.pid; please update the unit file 
accordingly.


It does not matter to the running of WeeWX, but thought I'd point it out.

WeeWX version: 4.0.0b17
setup.py install method
Python 2.7.17
systemd v: 244

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/93f880dc-5d69-4669-b24a-5a30da803429%40googlegroups.com.

Re: [weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-03 Thread G Hammer

Metric is not used in the US would be the problem.


On Fri, Apr 3, 2020, 10:37 AM steeple ian  wrote:

> Quote from yr.no website: -
>
> *"A new Yr API is on the way!*
>
> We are working on a new and modern API, that we plan to release some time
> in the winter 2019. Make sure you visit this site to keep posted!"
>
> I am not sure why metric only is so much of a problem anyway, but maybe
> that will be fixed in the new API anyway.
>
> From a personal point of view, I use forecasting services from YR DarkSky,
> WU, and UK Metoffice. I know it can be subjective but for my location YR is
> by far the most accurate.
>
> Ian
>
> On Fri, Apr 3, 2020 at 3:17 PM Pat  wrote:
>
>> yr.no isn't commercially owned, so the theory is they won't get bought
>> out or go away. They're owned by the Norwegian Broadcasting Corporation
>> and the Norwegian Meteorological Institute. That said, it's only in
>> metric, does not have weather alerts and is in XML format only.
>>
>> The pro is that they don't seem at risk of being purchased and going
>> away. The con is it may not be a good fit for how the skin is being used.
>>
>>
>> On Friday, April 3, 2020 at 10:01:39 AM UTC-4, G Hammer wrote:
>>>
>>> I'd say OWM, simply because I see no way to get anything except metric/C
>>> from yr.no
>>>
>>> On Thursday, April 2, 2020 at 9:11:43 PM UTC-4, Pat wrote:
>>>>
>>>> I'm sure the Belchertown skin could benefit from the forecasts plugin,
>>>> but Belchertown does more than that. It shows weather alerts for your
>>>> location as well as current conditions. The forecasting plugin doesn't
>>>> provide those 2 bits. For that you need a service, and if you're getting
>>>> info from the service (in my opinion), one stop shop for it (get the
>>>> forecast too).
>>>>
>>>> As for maintaining a plugin base for each region/location, that's not
>>>> something I can develop or support right now. The JSON would have to be
>>>> formatted exactly for each service in order to support the current way of
>>>> updates. Again, this is a simple task for 1 provider who has all this data
>>>> for worldwide regions
>>>>
>>>> I understand that OWM could become the next DarkSky but I think it's
>>>> the best option for what we have right now. The free tier should be able to
>>>> provide enough data to replace DarkSky.
>>>>
>>>> It's just a matter of time on my end.
>>>>
>>>>
>>>> On Thursday, April 2, 2020 at 6:38:28 PM UTC-4, William Burton wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> On Thursday, April 2, 2020 at 4:34:46 PM UTC-4, Wes Witt wrote:
>>>>>>
>>>>>> how about implementing a design that allows for weather forecast
>>>>>> extensions/plugins. then regional plugins can be built and allow the user
>>>>>> to choose the weather forecast service that is best for them. this way 
>>>>>> you
>>>>>> don't need a single service that works for everyone. it can be very
>>>>>> difficult to find a service that works everywhere and if you can find one
>>>>>> it may result in a low bar terms of quality and features from the 
>>>>>> service.
>>>>>>
>>>>>
>>>>> I was thinking the exact same thing as it doesn't make sense for every
>>>>> skin author to have to implement forecasting from scratch. There are many
>>>>> API's and there won't be one that works for everyone everywhere.
>>>>>
>>>>> The weewx-forecast extension (
>>>>> https://github.com/matthewwall/weewx-forecast), already handles the
>>>>> following weather forecasting services:
>>>>>
>>>>>   US National Weather Service (NWS)
>>>>>   the weather underground (WU)
>>>>>   open weathermap (OWM)
>>>>>   UK Met Office (UKMO)
>>>>>   Aeris Weather
>>>>>   World Weather Online (WWO)
>>>>>   Dark Sky (DS)
>>>>>   Zambretti
>>>>>
>>>>> The extension also handles tide predictions using xtide.
>>>>>
>>>>>
>>>>> My thought was to enhance the weewx-forecast extension to:
>>>>>
>>>>>
>>>>>- Output a generic JSON file

[weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-03 Thread G Hammer

I'd say OWM, simply because I see no way to get anything except metric/C 
from yr.no

On Thursday, April 2, 2020 at 9:11:43 PM UTC-4, Pat wrote:
>
> I'm sure the Belchertown skin could benefit from the forecasts plugin, but 
> Belchertown does more than that. It shows weather alerts for your location 
> as well as current conditions. The forecasting plugin doesn't provide those 
> 2 bits. For that you need a service, and if you're getting info from the 
> service (in my opinion), one stop shop for it (get the forecast too). 
>
> As for maintaining a plugin base for each region/location, that's not 
> something I can develop or support right now. The JSON would have to be 
> formatted exactly for each service in order to support the current way of 
> updates. Again, this is a simple task for 1 provider who has all this data 
> for worldwide regions
>
> I understand that OWM could become the next DarkSky but I think it's the 
> best option for what we have right now. The free tier should be able to 
> provide enough data to replace DarkSky. 
>
> It's just a matter of time on my end.
>
>
> On Thursday, April 2, 2020 at 6:38:28 PM UTC-4, William Burton wrote:
>>
>> Hello,
>>
>> On Thursday, April 2, 2020 at 4:34:46 PM UTC-4, Wes Witt wrote:
>>>
>>> how about implementing a design that allows for weather forecast 
>>> extensions/plugins. then regional plugins can be built and allow the user 
>>> to choose the weather forecast service that is best for them. this way you 
>>> don't need a single service that works for everyone. it can be very 
>>> difficult to find a service that works everywhere and if you can find one 
>>> it may result in a low bar terms of quality and features from the service.
>>>
>>
>> I was thinking the exact same thing as it doesn't make sense for every 
>> skin author to have to implement forecasting from scratch. There are many 
>> API's and there won't be one that works for everyone everywhere.
>>
>> The weewx-forecast extension (
>> https://github.com/matthewwall/weewx-forecast), already handles the 
>> following weather forecasting services:
>>
>>   US National Weather Service (NWS)
>>   the weather underground (WU)
>>   open weathermap (OWM)
>>   UK Met Office (UKMO)
>>   Aeris Weather
>>   World Weather Online (WWO)
>>   Dark Sky (DS)
>>   Zambretti
>>
>> The extension also handles tide predictions using xtide.
>>
>>
>> My thought was to enhance the weewx-forecast extension to:
>>
>>
>>- Output a generic JSON file that can be loaded via Ajax into a theme. As 
>> much as possible, the JSON would be generated in a manner that's consistent 
>> across different API implementations to make it easier to incorporate into a 
>> skin.
>>- Output one or more include files that can be included into other skins.
>>
>> Skins like Belchertown can incorporate this output using either method as 
>> appropriate. The end result is it would be far easier for skin maintainers 
>> to expand forecasting options.
>>
>> The benefit to this approach is the ability to support many more options for 
>> forecasting more widely. However, a small drawback is users of WeeWX will 
>> have to install another extension and configure it in addition to the 
>> selected skin.
>>
>> -Bill
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2cc9aa30-5803-46db-b3cd-157988b575ab%40googlegroups.com.

[weewx-user] Re: Changes with Belchertown skin & DarkSky

2020-04-02 Thread G Hammer

I like OpenWeatherMap.


On Wednesday, April 1, 2020 at 6:57:35 PM UTC-4, Pat wrote:
>
> I'm looking at OpenWeatherMap and yr.no. Both look like they could handle 
> worldwide current conditions and forecasts for free. More research to do 
> though
>
> On Wednesday, April 1, 2020 at 12:22:20 PM UTC-4, Xant wrote:
>>
>>
>> DarkSky announcement on it's blog: https://blog.darksky.net/
>>
>> Excerpt regarding DarkSky free Weather API: "Our API service for existing 
>> customers is not changing today, but we will no longer accept new signups. 
>> The API will continue to function through the end of 2021."
>>
>> Its sad, troublesome and concerning, as myself use DarkSky API for other 
>> forecasts. 
>>
>> Immediate reaction from the tech World: 
>> https://www.theverge.com/2020/4/1/21202259/android-weather-app-dark-sky-apple-purchase-api
>>
>> Quick list of 'almost free' Weather APIs: 
>> https://rapidapi.com/blog/access-global-weather-data-with-these-weather-apis/
>>
>>
>> Two really free, and consistent, Weather APIs:
>>
>>- NOAA: https://www.ncdc.noaa.gov/cdo-web/webservices/v2
>>
>> Note: I may assume that using NOAA it is going direct to main weather 
>> data source; also been ".gov" might be free for long
>>
>>  
>>
>>- YR.no: 
>>
>> https://hjelp.yr.no/hc/en-us/articles/360001940793-Free-weather-data-service-from-Yr
>>
>> Excerpt note from YR.no API webpage: "You can get a lot of the content on 
>> Yr for free, to use for various applications and services. This is a unique 
>> offer in Europe. In other countries weather data is highly valuable and 
>> expensive."
>>
>>
>>
>> Congrats Pat!
>> Xant
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/32aa6dee-10f4-49ad-beff-a3b3fb5be6f0%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-03-23 Thread G Hammer

Final update on this.
I could find no distro that has IPv6 enabled on their inbuilt websockets. 
Nor can I find a way to build websockets and enable IPv6.
So, I added a DNS entry pointing at only the IPv4 address, added the host 
name to my SSL certificate, edited the Belchertown websocket entry to use 
this host name.

Voila! Fully functional.
May not be the elegant method, but it indeed works fine.



On Wednesday, March 18, 2020 at 12:54:13 PM UTC-4, G Hammer wrote:
>
>
>
> On Tuesday, March 17, 2020 at 1:13:32 PM UTC-4, G Hammer wrote:
>>
>> The issue is resolved by the following:
>>
>> I installed 
>> libfreetype6-dev
>> libjpeg-dev
>> python-cjson
>>
>> I uninstalled the skin, made certain the directories were gone, rebooted 
>> and installed the skin again.
>>
>> After configuring, I get full functionality..
>>
>> The last item is to resolve why my local mosquitto server is not 
>> accepting IPv6 websockets.
>>
>> sudo netstat -tulpn | grep -E '8883|9001'
>> tcp0  0 0.0.0.0:88830.0.0.0:*  
>>  LISTEN  968/mosquitto   
>> tcp0  0 0.0.0.0:90010.0.0.0:*  
>>  LISTEN  968/mosquitto   
>> tcp6   0  0 :::8883 :::*
>> LISTEN  968/mosquitto
>>
>> Not a firewall or iptables issue:
>> root@srvr:~# ufw status
>> Status: inactive
>> root@srvr:~# systemctl status iptables-persistent
>> Unit iptables-persistent.service could not be found.
>> root@srvr:~# systemctl status iptables
>> Unit iptables.service could not be found.
>>
>> I'll note that websockets IPv6 is not shown in the mosquitto startup 
>> logs. But I'm not certain websockets would show each type as the other 
>> sockets do:
>> 1584380087: mosquitto version 1.4.15 (build date Tue, 18 Jun 2019 
>> 11:42:22 -0300) starting
>> 1584380087: Config loaded from /etc/mosquitto/mosquitto.conf.
>> 1584380087: Opening ipv4 listen socket on port 1883.
>> 1584380087: Opening ipv6 listen socket on port 1883.
>> 1584380087: Opening ipv4 listen socket on port 8883.
>> 1584380087: Opening ipv6 listen socket on port 8883.
>> 1584380087: Opening websockets listen socket on port 9001.
>>
>> Any mosquitto assist would be helpful.
>>
>
> It seems that the websockets included with Linux Mint 19.3 does not have 
> IPv6 support compiled into it.
> Lousy choice on the part of Linux Mint. 
>
> I hope this might save someone else from the same.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/3a8e825a-04af-4a0b-98a1-f104d303245b%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-03-18 Thread G Hammer



On Tuesday, March 17, 2020 at 1:13:32 PM UTC-4, G Hammer wrote:
>
> The issue is resolved by the following:
>
> I installed 
> libfreetype6-dev
> libjpeg-dev
> python-cjson
>
> I uninstalled the skin, made certain the directories were gone, rebooted 
> and installed the skin again.
>
> After configuring, I get full functionality..
>
> The last item is to resolve why my local mosquitto server is not accepting 
> IPv6 websockets.
>
> sudo netstat -tulpn | grep -E '8883|9001'
> tcp0  0 0.0.0.0:88830.0.0.0:*  
>  LISTEN  968/mosquitto   
> tcp0  0 0.0.0.0:90010.0.0.0:*  
>  LISTEN  968/mosquitto   
> tcp6   0  0 :::8883 :::*
> LISTEN  968/mosquitto
>
> Not a firewall or iptables issue:
> root@srvr:~# ufw status
> Status: inactive
> root@srvr:~# systemctl status iptables-persistent
> Unit iptables-persistent.service could not be found.
> root@srvr:~# systemctl status iptables
> Unit iptables.service could not be found.
>
> I'll note that websockets IPv6 is not shown in the mosquitto startup logs. 
> But I'm not certain websockets would show each type as the other sockets do:
> 1584380087: mosquitto version 1.4.15 (build date Tue, 18 Jun 2019 11:42:22 
> -0300) starting
> 1584380087: Config loaded from /etc/mosquitto/mosquitto.conf.
> 1584380087: Opening ipv4 listen socket on port 1883.
> 1584380087: Opening ipv6 listen socket on port 1883.
> 1584380087: Opening ipv4 listen socket on port 8883.
> 1584380087: Opening ipv6 listen socket on port 8883.
> 1584380087: Opening websockets listen socket on port 9001.
>
> Any mosquitto assist would be helpful.
>

It seems that the websockets included with Linux Mint 19.3 does not have 
IPv6 support compiled into it.
Lousy choice on the part of Linux Mint. 

I hope this might save someone else from the same.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/75f8539b-64c7-4b34-9015-789c3b2cf7e8%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-03-17 Thread G Hammer

The issue is resolved by the following:

I installed
libfreetype6-dev
libjpeg-dev
python-cjson

I uninstalled the skin, made certain the directories were gone, rebooted
and installed the skin again.

After configuring, I get full functionality..

The last item is to resolve why my local mosquitto server is not accepting
IPv6 websockets.

sudo netstat -tulpn | grep -E '8883|9001'
tcp0 0 0.0.0.0:88830.0.0.0:* LISTEN
968/mosquitto
tcp0 0 0.0.0.0:90010.0.0.0:* LISTEN
968/mosquitto
tcp6 0 0 :::8883 :::*LISTEN
968/mosquitto

Not a firewall or iptables issue:
root@srvr:~# ufw status
Status: inactive
root@srvr:~# systemctl status iptables-persistent
Unit iptables-persistent.service could not be found.
root@srvr:~# systemctl status iptables
Unit iptables.service could not be found.

I'll note that websockets IPv6 is not shown in the mosquitto startup logs.
But I'm not certain websockets would show each type as the other sockets do:
1584380087: mosquitto version 1.4.15 (build date Tue, 18 Jun 2019 11:42:22
-0300) starting
1584380087: Config loaded from /etc/mosquitto/mosquitto.conf.
1584380087: Opening ipv4 listen socket on port 1883.
1584380087: Opening ipv6 listen socket on port 1883.
1584380087: Opening ipv4 listen socket on port 8883.
1584380087: Opening ipv6 listen socket on port 8883.
1584380087: Opening websockets listen socket on port 9001.

Any mosquitto assist would be helpful.

--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/0dac4007-2917-49dd-934f-0929739ea0c4%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-03-09 Thread G Hammer

Changing to public_html/bark produces the same results.
Did you mean out of the public_html directory?

The weewx weather pages are off of my main website which I do not wish to 
move. I can change the apache config to add another directory structure if 
needed.
However, as Seasons skin has no problem, I'm think this isn't the issue.

I'm attaching a listing of the files in the directory tree. Maybe that will 
help a bit.

On Sunday, March 8, 2020 at 9:43:16 PM UTC-4, Pat wrote:
>
> Not much here to go off of. Can you try using a different HTML directory 
> to see if that makes any difference? It looks like it downloaded the 
> forecast file so that good that it's going something.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/cadb9f33-cdba-44e7-a3a2-b901b9cda535%40googlegroups.com.

dirdump
Description: Binary data

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-03-08 Thread G Hammer

Well, perhaps these are related to my mystery.

Mar  8 21:00:24 srvr weewx[29324] INFO user.belchertown: New forecast file 
downloaded to /home/weewx/public_html/weather/json/darksky_forecast.json
Mar  8 21:00:24 srvr weewx[29324] INFO weewx.cheetahgenerator: Generated 11 
files for report Belchertown in 0.55 seconds
Mar  8 21:00:24 srvr weewx[29324] INFO weewx.reportengine: Copied 2 files 
to /home/weewx/public_html/weather

So, having no luck in finding why this skin will not produce output, I 
decided to upload a weewx.conf that uses the Seasons skin. When I stopped 
weewx, I got an error.
root@srvr:/home/weewx/public_html/weather/json# service weewx stop
sh: 0: getcwd() failed: No such file or directory

Thing is, I had tail -f /var/log/syslog in another window and there was 
nothing untoward shown.
Simply changing to the root of the filesystem gave the expected results.
root@srvr:/home/weewx/public_html/weather/json# cd /
root@srvr:/# service weewx stop
root@srvr:/# service weewx start

Seasons skin is fine BTW.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/314a01c6-b1fd-4760-ac53-f97db3208048%40googlegroups.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Perhaps, but it is working on my production system at the moment under
python 2.7

On Fri, Feb 21, 2020, 5:34 PM vince  wrote:

> On Friday, February 21, 2020 at 2:27:34 PM UTC-8, J D wrote:
>>
>> Sorry to tell you but what you posted has indentation problems in many
>> places. I would spend some time reading the link I sent you about python
>> indentation and try it again.
>>
>>>
>>>
> The file you are starting with is hosed on the github side.  No way it
> works as-is with weewx of any version.
>
> There are 39 places on 32 lines.   Simply substituting 4-spaces for 1-tab
> globally doesn't do it, as it results in hosed space-based indenting that
> needs hand-fixing to add/delete spaces so the actual code works.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/7fc0a424-79d3-4c43-b01e-65d83d858a4b%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-1%3Dbh2SSJRn4PFDPU0rYPGE5ZhpXPekOWZJWtqyA-VB%3Dg%40mail.gmail.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Perhaps I'll leave this to actual programmers.

If it is something easily done, I'm game.

If it requires hours of hunt the wumpus, seems to be a useless endeavor.

I've removed the tab/space problem. As I do not program, it's beyond me
what level of indentation is needed.



On Fri, Feb 21, 2020, 5:27 PM J D  wrote:

> Hi,
> Sorry to tell you but what you posted has indentation problems in many
> places. I would spend some time reading the link I sent you about python
> indentation and try it again.
> Thanks
>
> On Saturday, January 18, 2020 at 7:46:16 PM UTC-7, G Hammer wrote:
>>
>> I'd like to run v4 when I upgrade hardware this week.
>> Seems to be doing fine for the devices and skin I use.
>> With one exception, a RainMachine extension.
>> There is one that was written by someone at RainMachine, but I think he
>> has moved on.
>> I've asked there and raised an issue on the github page for the extension
>> with no response.
>>
>> How, besides installing v4 and the extension, can I determine if it will
>> run under v4?
>>
>> The extension is located at
>> https://github.com/sprinkler/rainmachine-weewx and referenced at
>> https://github.com/weewx/weewx/wiki/RainMachine
>>
>> With this functionality confirmed, I can make the change, without it I'll
>> need to stay with v3
>>
>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/c5f85afb-dec6-4f6f-9aed-8c04e53a4dab%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/c5f85afb-dec6-4f6f-9aed-8c04e53a4dab%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-22yx2w%3DGqgKP6q2bPrO5Tk_Z-Dr7iL7Fqxm31Rpj%3Dopw%40mail.gmail.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Well, considering that you didn't address any of the reported errors, I
don't see what info would help.


On Fri, Feb 21, 2020, 5:27 PM vince  wrote:

> On Friday, February 21, 2020 at 1:49:43 PM UTC-8, G Hammer wrote:
>>
>> No, it did not. I had already ran it through and found many errors.
>> Going to start from scratch, first removing all tabs in favor of 4 spaces.
>> Then run it through 2to3, then see what errors out.
>>
>>
> If you don't share with us what errors you're finding we can't really help.
>
> I'm going to give up on helping with this one.  Best of luck.
>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/2fc02509-9f9f-4052-a1cd-91694404f6b2%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/2fc02509-9f9f-4052-a1cd-91694404f6b2%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-1b8ZLigbc3hyJbKZWUp-W1PeUWN3_cZheVc5195t51Eg%40mail.gmail.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

File attached as rainmachine2.py


On Friday, February 21, 2020 at 4:58:01 PM UTC-5, G Hammer wrote:
>
> Ok, downloaded the file, took the original expand --tabs=4 rainmachine.py 
> > temp.txt replaced the .py file with the .txt file resulting in a 
> rainmachine.py with no tabs.
> Ran 2to3 get an error, a lone 'return' on line 67.
>
> RefactoringTool: There was 1 error:
> RefactoringTool: Can't parse rainmachine.py: ParseError: bad input: 
> type=1, value='return', context=('', (67, 4))
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d20e4710-3f81-4a5d-85df-1f620609839e%40googlegroups.com.
# Copyright 2018 Green Electronics LLC
"""
Upload weather data directly to RainMachine smart irrigation controler 
  http://rainmachine.com

Based on RainMachine API 4.6 https://rainmachine.docs.apiary.io/

This extension only works on the local network (doesn't work with RainMachine 
Remote Access service). RainMachine IP address and https port 8080 must be 
accessible from WeeWX installation.

An access token is needed and can be obtained with a POST request:
curl -X POST -k -d ' { "pwd": "admin", "remember":1}' https://rainmachine_ip:8080/api/4/auth/login

More details can be found here: 
https://support.rainmachine.com/hc/en-us/articles/228022248-Controlling-RainMachine-through-REST-API

By default data is sent to RainMachine hourly. Although is possible to send data more often the
RainMachine Mixer (that aggregates data from multiple sources) runs only hourly.


Minimal configuration:

[StdRESTful]
[[RainMachine]]
token = ACCESS_TOKEN
ip = RAINMACHINE IP
usessl = false
"""

import Queue
import syslog
import urllib
import urllib2
import json

import weewx
import weewx.restx
import weewx.units
from weeutil.weeutil import to_bool, accumulateLeaves, startOfDayUTC

VERSION = "0.3"

if weewx.__version__ < "3":
raise weewx.UnsupportedFeature("weewx 3 is required, found %s" %
   weewx.__version__)

def logmsg(level, msg):
syslog.syslog(level, 'restx: RainMachine: %s' % msg)

def logdbg(msg):
logmsg(syslog.LOG_DEBUG, msg)

def loginf(msg):
logmsg(syslog.LOG_INFO, msg)

def logerr(msg):
logmsg(syslog.LOG_ERR, msg)


def _get_day_min_max_temp(dbm, ts):
sod = startOfDayUTC(ts)
val = dbm.getSql("SELECT MIN(outTemp), MAX(outTemp) FROM %s "
 "WHERE dateTime>? AND dateTime<=?" %
 dbm.table_name, (sod, ts))
if val is None:
return None, None

return val

# convert temperature to celsius (we need this from values read from DB)
def _convert_temperature(v, from_unit):
if from_unit is None or v is None:
return None
if from_unit != weewx.METRIC:
std_type, _ = weewx.units.getStandardUnitType(from_unit, 'outTemp')
from_type = (v, std_type, 'group_temperature')
v = weewx.units.convert(from_type, 'degree_C')[0]
return v



class RainMachine(weewx.restx.StdRESTful):
def __init__(self, engine, config_dict):
super(RainMachine, self).__init__(engine, config_dict)
loginf('service version is %s' % VERSION)

site_dict = weewx.restx.get_site_dict(config_dict, 'RainMachine', 'token', 'ip')
if site_dict is None:
logerr("Data will not be posted: Missing configuration options.")
return

site_dict.setdefault('usessl', False)
site_dict['usessl'] = to_bool(site_dict.get('usessl'))

site_dict['manager_dict'] = weewx.manager.get_manager_dict(
config_dict['DataBindings'], config_dict['Databases'], 'wx_binding')

self.archive_queue = Queue.Queue()
self.archive_thread = RainMachineThread(self.archive_queue, **site_dict)
self.archive_thread.start()
self.bind(weewx.NEW_ARCHIVE_RECORD, self.new_archive_record)
loginf("Data will be uploaded for RainMachine located at %s ssl: %s" % (site_dict['ip'], site_dict['usessl']))

def new_archive_record(self, event):
self.archive_queue.put(event.record)


class RainMachineThread(weewx.restx.RESTThread):
"""
RainMachine POST /api/4/parser/data expected data format (metric units only):
{
"weather": [
{
"mintemp":null,
"maxtemp": null,
"temperatur

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Ok, downloaded the file, took the original expand --tabs=4 rainmachine.py > 
temp.txt replaced the .py file with the .txt file resulting in a 
rainmachine.py with no tabs.
Ran 2to3 get an error, a lone 'return' on line 67.

RefactoringTool: There was 1 error:
RefactoringTool: Can't parse rainmachine.py: ParseError: bad input: type=1, 
value='return', context=('', (67, 4))



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8809a566-2a62-4493-bd59-e228256536ad%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

No, it did not. I had already ran it through and found many errors.
Going to start from scratch, first removing all tabs in favor of 4 spaces.
Then run it through 2to3, then see what errors out.

On Friday, February 21, 2020 at 4:27:13 PM UTC-5, vince wrote:
>
> On Friday, February 21, 2020 at 1:07:39 PM UTC-8, J D wrote:
>>
>> Hi,
>> So your edits for the tabs messed up the python indentation. I would go 
>> back to a previous version and make sure that for each tab you find that 
>> you put in the correct number of spaces so the code still lines up after 
>> you replace the tabs as it did before. This is why I need to see the actual 
>> file.
>>
>>>
>>>
> I ran the .py file through 2to3 here - see if this helps any.
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ef241471-f4f3-465e-80e3-dae51d500e2d%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Thanks, I'll give it a try!

On Friday, February 21, 2020 at 4:27:13 PM UTC-5, vince wrote:
>
> On Friday, February 21, 2020 at 1:07:39 PM UTC-8, J D wrote:
>>
>> Hi,
>> So your edits for the tabs messed up the python indentation. I would go 
>> back to a previous version and make sure that for each tab you find that 
>> you put in the correct number of spaces so the code still lines up after 
>> you replace the tabs as it did before. This is why I need to see the actual 
>> file.
>>
>>>
>>>
> I ran the .py file through 2to3 here - see if this helps any.
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/63603eb7-7079-465a-a344-932ec2fe348c%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

I'll take the original and try expand to rid the file of spaces.

On Friday, February 21, 2020 at 4:07:39 PM UTC-5, J D wrote:
>
> Hi,
> So your edits for the tabs messed up the python indentation. I would go 
> back to a previous version and make sure that for each tab you find that 
> you put in the correct number of spaces so the code still lines up after 
> you replace the tabs as it did before. This is why I need to see the actual 
> file.
> Thanks
>
> On Saturday, January 18, 2020 at 7:46:16 PM UTC-7, G Hammer wrote:
>>
>> I'd like to run v4 when I upgrade hardware this week.
>> Seems to be doing fine for the devices and skin I use.
>> With one exception, a RainMachine extension.
>> There is one that was written by someone at RainMachine, but I think he 
>> has moved on.
>> I've asked there and raised an issue on the github page for the extension 
>> with no response.
>>
>> How, besides installing v4 and the extension, can I determine if it will 
>> run under v4?
>>
>> The extension is located at 
>> https://github.com/sprinkler/rainmachine-weewx and referenced at 
>> https://github.com/weewx/weewx/wiki/RainMachine
>>
>> With this functionality confirmed, I can make the change, without it I'll 
>> need to stay with v3
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/718b2be4-c64f-412e-bd27-005d91ce0736%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Attached.

On Friday, February 21, 2020 at 3:43:12 PM UTC-5, J D wrote:
>
> Hi,
> Need to see the actual file creating the error since you have been 
> changing it based on your previous posts.
> Thanks
>
> On Saturday, January 18, 2020 at 7:46:16 PM UTC-7, G Hammer wrote:
>>
>> I'd like to run v4 when I upgrade hardware this week.
>> Seems to be doing fine for the devices and skin I use.
>> With one exception, a RainMachine extension.
>> There is one that was written by someone at RainMachine, but I think he 
>> has moved on.
>> I've asked there and raised an issue on the github page for the extension 
>> with no response.
>>
>> How, besides installing v4 and the extension, can I determine if it will 
>> run under v4?
>>
>> The extension is located at 
>> https://github.com/sprinkler/rainmachine-weewx and referenced at 
>> https://github.com/weewx/weewx/wiki/RainMachine
>>
>> With this functionality confirmed, I can make the change, without it I'll 
>> need to stay with v3
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6e0a5a97-d653-4f77-8cd9-3c48058a9ca1%40googlegroups.com.
# Copyright 2018 Green Electronics LLC
"""
Upload weather data directly to RainMachine smart irrigation controler 
  http://rainmachine.com

Based on RainMachine API 4.6 https://rainmachine.docs.apiary.io/

This extension only works on the local network (doesn't work with RainMachine 
Remote Access service). RainMachine IP address and https port 8080 must be 
accessible from WeeWX installation.

An access token is needed and can be obtained with a POST request:
curl -X POST -k -d ' { "pwd": "admin", "remember":1}' https://rainmachine_ip:8080/api/4/auth/login

More details can be found here: 
https://support.rainmachine.com/hc/en-us/articles/228022248-Controlling-RainMachine-through-REST-API

By default data is sent to RainMachine hourly. Although is possible to send data more often the
RainMachine Mixer (that aggregates data from multiple sources) runs only hourly.


Minimal configuration:

[StdRESTful]
[[RainMachine]]
token = ACCESS_TOKEN
	ip = RAINMACHINE IP
	usessl = false
"""

import queue
import syslog
import urllib.request, urllib.parse, urllib.error
import urllib.request, urllib.error, urllib.parse
import json

import weewx
import weewx.restx
import weewx.units
from weeutil.weeutil import to_bool, accumulateLeaves, startOfDayUTC

VERSION = "0.4"

if weewx.__version__ < "3":
raise weewx.UnsupportedFeature("weewx 3 is required, found %s" %
   weewx.__version__)

def logmsg(level, msg):
syslog.syslog(level, 'restx: RainMachine: %s' % msg)

def logdbg(msg):
logmsg(syslog.LOG_DEBUG, msg)

def loginf(msg):
logmsg(syslog.LOG_INFO, msg)

def logerr(msg):
logmsg(syslog.LOG_ERR, msg)


def _get_day_min_max_temp(dbm, ts):
sod = startOfDayUTC(ts)
val = dbm.getSql("SELECT MIN(outTemp), MAX(outTemp) FROM %s "
 "WHERE dateTime>? AND dateTime<=?" %
 dbm.table_name, (sod, ts))
if val is None:
return None, None
return val

# convert temperature to celsius (we need this from values read from DB)
def _convert_temperature(v, from_unit):
if from_unit is None or v is None:
return None
if from_unit != weewx.METRIC:
std_type, _ = weewx.units.getStandardUnitType(from_unit, 'outTemp')
from_type = (v, std_type, 'group_temperature')
v = weewx.units.convert(from_type, 'degree_C')[0]
return v



class RainMachine(weewx.restx.StdRESTful):
def __init__(self, engine, config_dict):
super(RainMachine, self).__init__(engine, config_dict)
loginf('service version is %s' % VERSION)

site_dict = weewx.restx.get_site_dict(config_dict, 'RainMachine', 'token', 'ip')
if site_dict is None:
logerr("Data will not be posted: Missing configuration options.")
site_dict.setdefault('usessl', False)
site_dict['usessl'] = to_bool(site_dict.get('usessl'))

site_dict['manager_dict'] = weewx.manager.get_manager_dict(
config_dict['DataBindings'], config_dict['Databases'], 'wx_binding')

self.archive_queue = queue.Queue()
self.archive_thread = RainMachineThread(self.archive_queue, **site_dict)
self.archive_thread.s

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

The code is located at gethub Rainmachine 
<https://github.com/sprinkler/rainmachine-weewx>
That page has some additional info that may be helpful as well.



On Friday, February 21, 2020 at 3:28:28 PM UTC-5, J D wrote:
>
> Hi,
> You need to post the actual code that produced this error if you want 
> additional help.
> Thanks
>
> On Saturday, January 18, 2020 at 7:46:16 PM UTC-7, G Hammer wrote:
>>
>> I'd like to run v4 when I upgrade hardware this week.
>> Seems to be doing fine for the devices and skin I use.
>> With one exception, a RainMachine extension.
>> There is one that was written by someone at RainMachine, but I think he 
>> has moved on.
>> I've asked there and raised an issue on the github page for the extension 
>> with no response.
>>
>> How, besides installing v4 and the extension, can I determine if it will 
>> run under v4?
>>
>> The extension is located at 
>> https://github.com/sprinkler/rainmachine-weewx and referenced at 
>> https://github.com/weewx/weewx/wiki/RainMachine
>>
>> With this functionality confirmed, I can make the change, without it I'll 
>> need to stay with v3
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d3ad4a1f-e407-4682-a1c3-14fb04042f7b%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Thanks, that got me through the formatting errors. No idea why sometimes in 
the same line use spaces tab spaces. But all that is cleaned up.
Now, program logic is failing it seems.

raceback (most recent call last):
  File "./bin/weewxd", line 261, in 
main()
  File "./bin/weewxd", line 148, in main
engine = weewx.engine.StdEngine(config_dict)
  File "/home/weewx/bin/weewx/engine.py", line 75, in __init__
self.loadServices(config_dict)
  File "/home/weewx/bin/weewx/engine.py", line 136, in loadServices
obj = weeutil.weeutil.get_object(svc)(self,config_dict)
  File "/home/weewx/bin/weeutil/weeutil.py", line 1093, in get_object
mod = __import__(module)
  File "/home/weewx/bin/user/rainmachine.py", line 82, in 
class RainMachine(weewx.restx.StdRESTful):
  File "/home/weewx/bin/user/rainmachine.py", line 87, in RainMachine
site_dict = weewx.restx.get_site_dict(config_dict, 'RainMachine', 
'token', 'ip')
NameError: name 'config_dict' is not defined


Runs fine under python 2

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6e6e2bf1-8722-49de-81a7-f924c98d12ab%40googlegroups.com.

[weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

I have installed 4.0.b12 and running only python 3.
I tried 2to3 on the rainmachine extension and while it had no errors in 
completing, the resulting code is not proper.
When I run weewx directly, it fails when loading rainmachine:
 File "/home/weewx/bin/user/rainmachine.py", line 67
return None, None
^
TabError: inconsistent use of tabs and spaces in indentation

As I'm not a programmer, I have no idea of what use of tabs and spaces 
would mean.

Help?

On Saturday, January 18, 2020 at 9:46:16 PM UTC-5, G Hammer wrote:
>
> I'd like to run v4 when I upgrade hardware this week.
> Seems to be doing fine for the devices and skin I use.
> With one exception, a RainMachine extension.
> There is one that was written by someone at RainMachine, but I think he 
> has moved on.
> I've asked there and raised an issue on the github page for the extension 
> with no response.
>
> How, besides installing v4 and the extension, can I determine if it will 
> run under v4?
>
> The extension is located at https://github.com/sprinkler/rainmachine-weewx 
> and 
> referenced at https://github.com/weewx/weewx/wiki/RainMachine
>
> With this functionality confirmed, I can make the change, without it I'll 
> need to stay with v3
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f1079749-7e54-4667-abfa-12c62927435e%40googlegroups.com.

Re: [weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-20 Thread G Hammer

Perhaps I will save my database and wipe the machine, then reinstall using
WeeWX 4 and python 3.

I have an incompatible driver but hopefully I can find a way to correct it
before irrigation season starts.

More to come

On Thu, Feb 20, 2020, 9:13 PM Pat  wrote:

> It should work in your configuration - weewx 4, python 2. I have this in a
> virtual machine and it's working fine for me. So I'm not sure what's gone
> south.
>
> On my real website, I'm using python 3 and weewx 4.
>
> But it should work on weewx 3.9.2 with python 2, weewx 4 python 2, and
> weewx 4 python 3.
>
> On Thursday, February 20, 2020 at 9:00:55 AM UTC-5, G Hammer wrote:
>>
>> Yes, the encoding was there.
>>
>> So, here's an idea. What exactly should be installed to run this skin?
>> Meaning, how are you configured?
>>
>>
>> On Wednesday, February 19, 2020 at 12:53:13 PM UTC-5, Pat wrote:
>>>
>>> I see why, but this is another one I can't replicate. It's an encoding
>>> problem again.  Can you verify your belchertown.js.tmpl file has this at
>>> the top? #encoding UTF-8
>>>
>>> Here's what's causing the error in your compiled belchertown.js file.
>>>
>>> var categories = [u'N', u'NNE', u'NE', u'ENE', u'E',
>>> u'ESE', u'SE', u'SSE', u'S', u'SSW', u'SW', u'WSW', u'W', u'WNW', u'NW',
>>> u'NNW', u'N/A'];
>>>
>>>
>>>
>>> On Wednesday, February 19, 2020 at 10:29:19 AM UTC-5, G Hammer wrote:
>>>>
>>>> https://ghammer.net/weather
>>>>
>>>> On Tuesday, February 18, 2020 at 9:25:35 AM UTC-5, Pat wrote:
>>>>>
>>>>> Interesting... Remind me of the link to your site?
>>>>>
>>>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/AQ8Xw5K9PFo/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/7afe82e2-26bb-4265-a4b8-5ce303f6d9b0%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/7afe82e2-26bb-4265-a4b8-5ce303f6d9b0%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-2hoDavato9DsEnzOK8u1h4GYUyPE%2B7_TCjWZuCsqXUbw%40mail.gmail.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-20 Thread G Hammer

Yes, the encoding was there.

So, here's an idea. What exactly should be installed to run this skin? 
Meaning, how are you configured?


On Wednesday, February 19, 2020 at 12:53:13 PM UTC-5, Pat wrote:
>
> I see why, but this is another one I can't replicate. It's an encoding 
> problem again.  Can you verify your belchertown.js.tmpl file has this at 
> the top? #encoding UTF-8
>
> Here's what's causing the error in your compiled belchertown.js file.
> 
> var categories = [u'N', u'NNE', u'NE', u'ENE', u'E', 
> u'ESE', u'SE', u'SSE', u'S', u'SSW', u'SW', u'WSW', u'W', u'WNW', u'NW', 
> u'NNW', u'N/A'];
>
>
>
> On Wednesday, February 19, 2020 at 10:29:19 AM UTC-5, G Hammer wrote:
>>
>> https://ghammer.net/weather
>>
>> On Tuesday, February 18, 2020 at 9:25:35 AM UTC-5, Pat wrote:
>>>
>>> Interesting... Remind me of the link to your site?
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/82bd5de3-2c91-496b-ac91-c04266b226e2%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-19 Thread G Hammer

https://ghammer.net/weather

On Tuesday, February 18, 2020 at 9:25:35 AM UTC-5, Pat wrote:
>
> Interesting... Remind me of the link to your site?
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d72747fe-fe15-41a3-9975-113198228153%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-18 Thread G Hammer

Pat,

While the pages are created now, I have no charts, no history, no MQTT.
There are a number of errors in the dev console I'm attaching 2 here.


On Monday, February 17, 2020 at 9:25:33 PM UTC-5, Pat wrote:
>
> And things are looking OK right now? Seems like it?
>
> On Monday, February 17, 2020 at 9:22:47 PM UTC-5, G Hammer wrote:
>>
>> Yes, I have.
>> WeeWX version: 4.0.0b12
>> Belchertown Skin Version: 1.1b9
>>
>> On Monday, February 17, 2020 at 8:46:03 PM UTC-5, Pat wrote:
>>>
>>> Just curious, have you upgraded weewx to 4.0.0b12?
>>>
>>> On Monday, February 17, 2020 at 8:34:16 PM UTC-5, Pat wrote:
>>>>
>>>> Ok looks like it's the same error just repeated. I wonder why you're 
>>>> seeing that and I'm not. I'll continue to tinker on a dev machine to try 
>>>> and re-create it. 
>>>>
>>>> On Monday, February 17, 2020 at 8:29:32 PM UTC-5, G Hammer wrote:
>>>>>
>>>>> Thanks for the effort. Yes, the forecast still fails the same way.
>>>>> Additionally, there are new errors with this version.
>>>>>
>>>>> See attached file for the pertinent log lines.
>>>>>
>>>>>
>>>>> On Monday, February 17, 2020 at 11:28:34 AM UTC-5, Pat wrote:
>>>>>>
>>>>>> I'm pretty sure I fixed this error (AttributeError: 'ListOfDicts' 
>>>>>> object has no attribute 'items'), but can you give it a try? 
>>>>>> Re-download the development branch and re-install it. Then restart 
>>>>>> weewx. 
>>>>>>
>>>>>> Are you still having the other error (Error writing forecast...)? 
>>>>>>
>>>>>>
>>>>>> On Friday, February 7, 2020 at 9:55:15 PM UTC-5, G Hammer wrote:
>>>>>>>
>>>>>>> Thanks Pat.
>>>>>>>
>>>>>>> Congrats on your upcoming baby!
>>>>>>>
>>>>>>> On Friday, February 7, 2020 at 9:36:18 PM UTC-5, Pat wrote:
>>>>>>>>
>>>>>>>> I haven't tried b10 or b11 yet. I'll see if I can find some time 
>>>>>>>> this weekend to set it up and try and replicate this. 
>>>>>>>>
>>>>>>>> On Friday, February 7, 2020 at 9:08:03 PM UTC-5, G Hammer wrote:
>>>>>>>>>
>>>>>>>>> I believe the error is related to a python3 vs python 2 issue. 
>>>>>>>>> Look at the path it is trying to write to:  the u' is odd.
>>>>>>>>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:
>>>>>>>>>    Warning: Error writing forecast info to 
>>>>>>>>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json.
>>>>>>>>>  
>>>>>>>>> Reason: [Errno 2] No such file or directory: 
>>>>>>>>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>>>>>>>>>>
>>>>>>>>>> I have been running b10 with no issues and today downloaded the 
>>>>>>>>>> dev version of the Belchertown skin.
>>>>>>>>>> I added the needed config and then ran WeeWX. I had issues when 
>>>>>>>>>> reports were run.
>>>>>>>>>> See attached files.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0a3c8314-df61-4d25-921c-20143c82702e%40googlegroups.com.
belchertown.js?1582034725:1071 Uncaught SyntaxError: Unexpected string
(index):117 Uncaught ReferenceError: ajaxweewx is not defined
at (index):117
(anonymous) @ (index):117
belchertown.js?1582034419:1071 Uncaught SyntaxError: Unexpected string
jquery.min.js:2 jQuery.Deferred exception: getURLvar is not defined 
ReferenceError: getURLvar is not defined
at HTMLDocument. 
(https://ghammer.net/weather/reports/?yr=2020&mo=01:112:25)
at l 
(https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js:2:29375)
at c 
(https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js:2:29677) 
undefined
w.Deferred.exceptionHook @ jquery.min.js:2
c @ jquery.min.js:2
setTimeout (async)
(anonymous) @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
fire @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
ready @ jquery.min.js:2
_ @ jquery.min.js:2
jquery.min.js:2 Uncaught ReferenceError: getURLvar is not defined
at HTMLDocument. (?yr=2020&mo=01:112)
at l (jquery.min.js:2)
at c (jquery.min.js:2)
(anonymous) @ ?yr=2020&mo=01:112
l @ jquery.min.js:2
c @ jquery.min.js:2
setTimeout (async)
w.readyException @ jquery.min.js:2
(anonymous) @ jquery.min.js:2
l @ jquery.min.js:2
c @ jquery.min.js:2
setTimeout (async)
(anonymous) @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
fire @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
c @ jquery.min.js:2
setTimeout (async)
(anonymous) @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
fire @ jquery.min.js:2
u @ jquery.min.js:2
fireWith @ jquery.min.js:2
ready @ jquery.min.js:2
_ @ jquery.min.js:2

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-17 Thread G Hammer

Yes, I have.
WeeWX version: 4.0.0b12
Belchertown Skin Version: 1.1b9

On Monday, February 17, 2020 at 8:46:03 PM UTC-5, Pat wrote:
>
> Just curious, have you upgraded weewx to 4.0.0b12?
>
> On Monday, February 17, 2020 at 8:34:16 PM UTC-5, Pat wrote:
>>
>> Ok looks like it's the same error just repeated. I wonder why you're 
>> seeing that and I'm not. I'll continue to tinker on a dev machine to try 
>> and re-create it. 
>>
>> On Monday, February 17, 2020 at 8:29:32 PM UTC-5, G Hammer wrote:
>>>
>>> Thanks for the effort. Yes, the forecast still fails the same way.
>>> Additionally, there are new errors with this version.
>>>
>>> See attached file for the pertinent log lines.
>>>
>>>
>>> On Monday, February 17, 2020 at 11:28:34 AM UTC-5, Pat wrote:
>>>>
>>>> I'm pretty sure I fixed this error (AttributeError: 'ListOfDicts' 
>>>> object has no attribute 'items'), but can you give it a try? 
>>>> Re-download the development branch and re-install it. Then restart weewx. 
>>>>
>>>> Are you still having the other error (Error writing forecast...)? 
>>>>
>>>>
>>>> On Friday, February 7, 2020 at 9:55:15 PM UTC-5, G Hammer wrote:
>>>>>
>>>>> Thanks Pat.
>>>>>
>>>>> Congrats on your upcoming baby!
>>>>>
>>>>> On Friday, February 7, 2020 at 9:36:18 PM UTC-5, Pat wrote:
>>>>>>
>>>>>> I haven't tried b10 or b11 yet. I'll see if I can find some time this 
>>>>>> weekend to set it up and try and replicate this. 
>>>>>>
>>>>>> On Friday, February 7, 2020 at 9:08:03 PM UTC-5, G Hammer wrote:
>>>>>>>
>>>>>>> I believe the error is related to a python3 vs python 2 issue. Look 
>>>>>>> at the path it is trying to write to:  the u' is odd.
>>>>>>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:
>>>>>>>    Warning: Error writing forecast info to 
>>>>>>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
>>>>>>> Reason: [Errno 2] No such file or directory: 
>>>>>>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>>>>>>>>
>>>>>>>> I have been running b10 with no issues and today downloaded the dev 
>>>>>>>> version of the Belchertown skin.
>>>>>>>> I added the needed config and then ran WeeWX. I had issues when 
>>>>>>>> reports were run.
>>>>>>>> See attached files.
>>>>>>>>
>>>>>>>>
>>>>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7c5c0056-8d55-4c35-8231-92251c6d2cd1%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-17 Thread G Hammer

The very next archive cycle, this is the result:

Feb 17 20:30:22 srvr weewx[32089] INFO user.belchertown: New forecast file 
downloaded to 
/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json
Feb 17 20:30:22 srvr weewx[32089] INFO weewx.restx: CWOP: Published record 
2020-02-17 20:30:00 EST (1581989400)
Feb 17 20:30:22 srvr weewx[32089] INFO user.belchertown: Update Checker: 
New GitHub Version file downloaded to 
/home/weewx/public_html/weather/belchertown/json/github_version.json
Feb 17 20:30:22 srvr weewx[32089] INFO weewx.restx: Weather365: Published 
record 2020-02-17 20:30:00 EST (1581989400)
Feb 17 20:30:24 srvr weewx[32089] INFO weewx.cheetahgenerator: Generated 33 
files for report Belchertown in 2.86 seconds
Feb 17 20:30:24 srvr weewx[32089] INFO weewx.reportengine: Copied 2 files 
to /home/weewx/public_html/weather/belchertown


After this, the pages are created normally and all is in place.

I do not have MQTT functionality, but that is something I will look at in a 
few minutes.
MQTT doesn't even show on the site, no error in connecting, offline, etc. 
I have the Windy pane, but no DarkSky forecast.

All these have to be my config so I'll go recheck everything.

Thanks Pat!


On Monday, February 17, 2020 at 11:28:34 AM UTC-5, Pat wrote:
>
> I'm pretty sure I fixed this error (AttributeError: 'ListOfDicts' object 
> has no attribute 'items'), but can you give it a try? Re-download the 
> development branch and re-install it. Then restart weewx. 
>
> Are you still having the other error (Error writing forecast...)? 
>
>
> On Friday, February 7, 2020 at 9:55:15 PM UTC-5, G Hammer wrote:
>>
>> Thanks Pat.
>>
>> Congrats on your upcoming baby!
>>
>> On Friday, February 7, 2020 at 9:36:18 PM UTC-5, Pat wrote:
>>>
>>> I haven't tried b10 or b11 yet. I'll see if I can find some time this 
>>> weekend to set it up and try and replicate this. 
>>>
>>> On Friday, February 7, 2020 at 9:08:03 PM UTC-5, G Hammer wrote:
>>>>
>>>> I believe the error is related to a python3 vs python 2 issue. Look at 
>>>> the path it is trying to write to:  the u' is odd.
>>>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:
>>>>    Warning: Error writing forecast info to 
>>>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
>>>> Reason: [Errno 2] No such file or directory: 
>>>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>>>
>>>>
>>>>
>>>>
>>>> On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>>>>>
>>>>> I have been running b10 with no issues and today downloaded the dev 
>>>>> version of the Belchertown skin.
>>>>> I added the needed config and then ran WeeWX. I had issues when 
>>>>> reports were run.
>>>>> See attached files.
>>>>>
>>>>>
>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a40fd190-4241-4c8c-a35a-8697c59ab6a3%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

2020-02-17 Thread G Hammer

Thanks for the effort. Yes, the forecast still fails the same way.
Additionally, there are new errors with this version.

See attached file for the pertinent log lines.


On Monday, February 17, 2020 at 11:28:34 AM UTC-5, Pat wrote:
>
> I'm pretty sure I fixed this error (AttributeError: 'ListOfDicts' object 
> has no attribute 'items'), but can you give it a try? Re-download the 
> development branch and re-install it. Then restart weewx. 
>
> Are you still having the other error (Error writing forecast...)? 
>
>
> On Friday, February 7, 2020 at 9:55:15 PM UTC-5, G Hammer wrote:
>>
>> Thanks Pat.
>>
>> Congrats on your upcoming baby!
>>
>> On Friday, February 7, 2020 at 9:36:18 PM UTC-5, Pat wrote:
>>>
>>> I haven't tried b10 or b11 yet. I'll see if I can find some time this 
>>> weekend to set it up and try and replicate this. 
>>>
>>> On Friday, February 7, 2020 at 9:08:03 PM UTC-5, G Hammer wrote:
>>>>
>>>> I believe the error is related to a python3 vs python 2 issue. Look at 
>>>> the path it is trying to write to:  the u' is odd.
>>>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:
>>>>    Warning: Error writing forecast info to 
>>>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
>>>> Reason: [Errno 2] No such file or directory: 
>>>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>>>
>>>>
>>>>
>>>>
>>>> On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>>>>>
>>>>> I have been running b10 with no issues and today downloaded the dev 
>>>>> version of the Belchertown skin.
>>>>> I added the needed config and then ran WeeWX. I had issues when 
>>>>> reports were run.
>>>>> See attached files.
>>>>>
>>>>>
>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d0d33cb9-58ee-4454-b55d-640bb425926a%40googlegroups.com.
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: reportengine: 
Caught unrecoverable exception in generator 
'weewx.cheetahgenerator.CheetahGenerator'
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   Error 
writing forecast info to 
/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. Reason: 
[Errno 2] No such file or directory: 
u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
Traceback (most recent call last):
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 202, in run
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
obj.start()
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 285, in start
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
self.run()
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 150, in run
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
ngen = self.generate(gen_dict[section_name], self.gen_ts)
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
ngen += self.generate(section[subsection], gen_ts)
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
ngen += self.generate(section[subsection], gen_ts)
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 309, in generate
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:   
default_binding)
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 376, in _getSearchList
Feb 17 20:25:33 srvr weewx[32089] ERROR weewx.reportengine:

[weewx-user] Re: Battery Status Incorrect

2020-02-16 Thread G Hammer

Thanks to both of you. Each solution has its point, but I do like just 
having the status 'OK' or 'LOW' so will look into how to get Raffaello's if 
statements to work with the skin or from weewx.conf

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8a9dedc8-60ec-4d87-a03d-dcd2be6e7540%40googlegroups.com.

[weewx-user] Battery Status Incorrect

2020-02-15 Thread G Hammer

I have gotten two of the three battery statuses to be reported in the 
Seasons skin.
The one, an Ecowitt WH40 rain gauge, reports it's actual voltage instead of 
a one or zero.
The battery status for this sensor always shows low as the voltage is 
reported so greater than 0.

How can I get the correct status of this sensor shown?

raw data: PASSKEY=&stationtype=GW1000B_V1.5.6&dateutc=2020-02-12+10:11:
35&tempinf=72.3&humidityin=29&baromrelin=30.020&baromabsin=29.551&tempf=34.7
&humidity=60&winddir=352&windspeedmph=2.46&windgustmph=6.93&maxdailygust=
15.88&solarradiation=0.00&uv=0&rainratein=0.000&eventrainin=0.091&
hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.177&monthlyrainin=0.189&
yearlyrainin=2.110&totalrainin=2.110&*wh65batt=0*&*wh40batt=1.6*&
*wh26batt=0*&freq=915M&model=GW1000_Pro
raw packet: {'wind_speed': 2.46, 'humidity_in': 29.0, 'temperature_in': 72.3
, 'rain_total': 2.11, 'solar_radiation': 0.0, 'wind_gust': 6.93, 
'wh65_battery': 0.0, 'humidity_out': 60.0, 'uv': 0.0, 'rain': 0.0, 
'wh26_battery': 0.0, 'pressure': 29.551, 'temperature_out': 34.7, 'wind_dir'
: 352.0, 'dateTime': 1581502295, 'rain_rate': 0.0, 'usUnits': 1}
mapped packet: {'pressure': 29.551, 'outHumidity': 60.0, 'UV': 0.0, 
'radiation': 0.0, 'rain': 0.0, 'dateTime': 1581502295, 'windDir': 352.0, 
'outTemp': 34.7, 'windSpeed': 2.46, 'inHumidity': 29.0, 'inTemp': 72.3, 
'windGust': 6.93, 'rainRate': 0.0, 'usUnits': 1}


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/9fbbc801-05e9-4ad4-9b08-f4969d1769c9%40googlegroups.com.

[weewx-user] Re: wanted: users with ecowitt gw1000 wifi bridge

2020-02-14 Thread G Hammer

Thank you, works a treat!
I just have to remember to test new Interceptor versions then edit if 
needed.


On Friday, February 14, 2020 at 11:36:59 AM UTC-5, Vetti52 wrote:
>
> When looking at interceptor.py version 0.53, there is not yet a wh40batt 
> sensor listed at the class ecowitt-client (Consumer).
> You may insert in interceptor.py after line 2249 wh65.batt an extra line 
> like
> 'wh65batt': 'wh65_battery',
> 'wh40batt': 'wh40_battery',
> 'pm25_ch1': 'pm2_5',
>
> and then add the sensor to weewx.conf like
> [Interceptor]
> ...
> [[sensor_map_extensions]]
>     rainBatteryStatus = wh40_battery
>  
>
>
>
>
> Am Mittwoch, 12. Februar 2020 11:22:19 UTC+1 schrieb G Hammer:
>>
>>
>> The question I have is how to map my rain gauge battery (wh40batt). This 
>> is the output running Interceptor directly.
>> raw data: 
>> PASSKEY=&stationtype=GW1000B_V1.5.6&dateutc=2020-02-12+10:11:35&tempinf=72.3&humidityin=29&baromrelin=30.020&baromabsin=29.551&tempf=34.7&humidity=60&winddir=352&windspeedmph=2.46&windgustmph=6.93&maxdailygust=15.88&solarradiation=0.00&uv=0&rainratein=0.000&eventrainin=0.091&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.177&monthlyrainin=0.189&yearlyrainin=2.110&totalrainin=2.110&wh65batt=0&wh40batt=1.6&wh26batt=0&freq=915M&model=GW1000_Pro
>> raw packet: {'wind_speed': 2.46, 'humidity_in': 29.0, 'temperature_in': 
>> 72.3, 'rain_total': 2.11, 'solar_radiation': 0.0, 'wind_gust': 6.93, 
>> 'wh65_battery': 0.0, 'humidity_out': 60.0, 'uv': 0.0, 'rain': 0.0, 
>> 'wh26_battery': 0.0, 'pressure': 29.551, 'temperature_out': 34.7, 
>> 'wind_dir': 352.0, 'dateTime': 1581502295, 'rain_rate': 0.0, 'usUnits': 1}
>> mapped packet: {'pressure': 29.551, 'outHumidity': 60.0, 'UV': 0.0, 
>> 'radiation': 0.0, 'rain': 0.0, 'dateTime': 1581502295, 'windDir': 352.0, 
>> 'outTemp': 34.7, 'windSpeed': 2.46, 'inHumidity': 29.0, 'inTemp': 72.3, 
>> 'windGust': 6.93, 'rainRate': 0.0, 'usUnits': 1}
>>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ffe5b6f5-8505-4e2c-93dd-aba563e1afee%40googlegroups.com.

[weewx-user] Re: wanted: users with ecowitt gw1000 wifi bridge

2020-02-12 Thread G Hammer

I have a question and an observation.
The observation is that 0.53 of Interceptor does not shut down cleanly with 
weewx version 4.0.0b12 (or b10, b11), Python 2.7.17

Feb 12 04:58:53 srvr systemd[1]: Stopping LSB: weewx weather system...
Feb 12 04:58:53 srvr weewx[26866]:  * Stopping weewx weather system weewx
Feb 12 04:58:53 srvr weewx[26625] INFO __main__: Received signal TERM (15).
Feb 12 04:58:53 srvr weewx[26625] INFO weewx.engine: Main loop exiting. 
Shutting engine down.
Feb 12 04:58:53 srvr weewx[26625] INFO weewx.engine: Shutting down 
StdReport thread
Feb 12 04:58:53 srvr weewx[26625] INFO user.interceptor: shutting down 
server thread
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: Terminating weewx version 
4.0.0b12
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   Traceback (most 
recent call last):
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/home/weewx/bin/weewxd", line 154, in main
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   engine.run()
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/home/weewx/bin/weewx/engine.py", line 186, in run
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   for packet 
in self.console.genLoopPackets():
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/home/weewx/bin/user/interceptor.py", line 2547, in genLoopPackets
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   data = 
self._device.get_queue().get(True, self._queue_timeout)
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/usr/lib/python2.7/Queue.py", line 177, in get
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   
self.not_empty.wait(remaining)
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/usr/lib/python2.7/threading.py", line 359, in wait
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   _sleep(delay)
Feb 12 04:58:54 srvr weewx[26625] INFO __main__: File 
"/home/weewx/bin/weewxd", line 257, in sigTERMhandler
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   raise 
Terminate
Feb 12 04:58:54 srvr weewx[26625] INFO __main__:   Terminate
Feb 12 04:58:58 srvr weewx[26866]: .   ...done.
Feb 12 04:58:58 srvr systemd[1]: Stopped LSB: weewx weather system.

The question I have is how to map my rain gauge battery (wh40batt). This is 
the output running Interceptor directly.
raw data: 
PASSKEY=&stationtype=GW1000B_V1.5.6&dateutc=2020-02-12+10:11:35&tempinf=72.3&humidityin=29&baromrelin=30.020&baromabsin=29.551&tempf=34.7&humidity=60&winddir=352&windspeedmph=2.46&windgustmph=6.93&maxdailygust=15.88&solarradiation=0.00&uv=0&rainratein=0.000&eventrainin=0.091&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.177&monthlyrainin=0.189&yearlyrainin=2.110&totalrainin=2.110&wh65batt=0&wh40batt=1.6&wh26batt=0&freq=915M&model=GW1000_Pro
raw packet: {'wind_speed': 2.46, 'humidity_in': 29.0, 'temperature_in': 
72.3, 'rain_total': 2.11, 'solar_radiation': 0.0, 'wind_gust': 6.93, 
'wh65_battery': 0.0, 'humidity_out': 60.0, 'uv': 0.0, 'rain': 0.0, 
'wh26_battery': 0.0, 'pressure': 29.551, 'temperature_out': 34.7, 
'wind_dir': 352.0, 'dateTime': 1581502295, 'rain_rate': 0.0, 'usUnits': 1}
mapped packet: {'pressure': 29.551, 'outHumidity': 60.0, 'UV': 0.0, 
'radiation': 0.0, 'rain': 0.0, 'dateTime': 1581502295, 'windDir': 352.0, 
'outTemp': 34.7, 'windSpeed': 2.46, 'inHumidity': 29.0, 'inTemp': 72.3, 
'windGust': 6.93, 'rainRate': 0.0, 'usUnits': 1}



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/3f650706-0a97-4eff-9b10-7d49d9ac77d7%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

Thanks Pat.

Congrats on your upcoming baby!

On Friday, February 7, 2020 at 9:36:18 PM UTC-5, Pat wrote:
>
> I haven't tried b10 or b11 yet. I'll see if I can find some time this 
> weekend to set it up and try and replicate this. 
>
> On Friday, February 7, 2020 at 9:08:03 PM UTC-5, G Hammer wrote:
>>
>> I believe the error is related to a python3 vs python 2 issue. Look at 
>> the path it is trying to write to:  the u' is odd.
>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
>> Warning: Error writing forecast info to 
>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
>> Reason: [Errno 2] No such file or directory: 
>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>
>>
>>
>>
>> On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>>>
>>> I have been running b10 with no issues and today downloaded the dev 
>>> version of the Belchertown skin.
>>> I added the needed config and then ran WeeWX. I had issues when reports 
>>> were run.
>>> See attached files.
>>>
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/08e008bf-54b1-4f31-a44e-736841176e96%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

No, I know which version I'm getting, weewx-belchertown-development and my 
python is 2.7
Thus, my question.

On Friday, February 7, 2020 at 9:46:56 PM UTC-5, vince wrote:
>
> On Friday, February 7, 2020 at 6:08:03 PM UTC-8, G Hammer wrote:
>>
>> I believe the error is related to a python3 vs python 2 issue. Look at 
>> the path it is trying to write to:  the u' is odd.
>> Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
>> Warning: Error writing forecast info to 
>> /home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
>> Reason: [Errno 2] No such file or directory: 
>> u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
>>
>>
>>
> The 'u' tells me that you are maybe running python3 against a python2 
> branch (master) of belchertown.
>
> If you did a 'git pull' remember to 'git checkout development' before 
> running wee_extension to install it.
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a77946ff-6768-4eb4-bd8a-7a51feb092d7%40googlegroups.com.

[weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

I believe the error is related to a python3 vs python 2 issue. Look at the 
path it is trying to write to:  the u' is odd.
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
Warning: Error writing forecast info to 
/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. 
Reason: [Errno 2] No such file or directory: 
u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'

On Friday, February 7, 2020 at 5:01:17 PM UTC-5, G Hammer wrote:
>
> I have been running b10 with no issues and today downloaded the dev 
> version of the Belchertown skin.
> I added the needed config and then ran WeeWX. I had issues when reports 
> were run.
> See attached files.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8a23b39b-0ad2-4e88-8aa8-6d9a1a9744f9%40googlegroups.com.

Re: [weewx-user] Re: Belchertown Development & WeeWX 4 b10 Error

Python 2
4.0.0b10
setup.py
Mint 19.3

Development branch of Belchertown from today 7 Feb


On Fri, Feb 7, 2020, 5:53 PM vince  wrote:

> On Friday, February 7, 2020 at 2:01:17 PM UTC-8, G Hammer wrote:
>>
>> I have been running b10 with no issues and today downloaded the dev
>> version of the Belchertown skin.
>> I added the needed config and then ran WeeWX. I had issues when reports
>> were run.
>> See attached files.
>>
>>
>>
> We'd need to have far more detail.
>
>
>- python3 or python2 ?
>- what version of belchertown ?
>- what os ?
>- setup.py or dpkg or rpm or ???
>
>
>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/AQ8Xw5K9PFo/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/beb85170-03d9-464c-866e-3c61c9267776%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/beb85170-03d9-464c-866e-3c61c9267776%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-3weTqFKqpNWVZ%3D%2B%3D2fcQFZ5WZUjvx9RnhH1MJqUM3GkQ%40mail.gmail.com.

[weewx-user] Belchertown Development & WeeWX 4 b10 Error

I have been running b10 with no issues and today downloaded the dev version 
of the Belchertown skin.
I added the needed config and then ran WeeWX. I had issues when reports 
were run.
See attached files.


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/5884c455-2d71-4f25-827c-e7ae42f693c9%40googlegroups.com.
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: reportengine: 
Caught unrecoverable exception in generator 
'weewx.cheetahgenerator.CheetahGenerator'
Feb  7 16:50:26 srvr weewx[23592] INFO weewx.restx: CWOP: Published record 
2020-02-07 16:50:00 EST (1581112200)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   Error 
writing forecast info to 
/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. Reason: 
[Errno 2] No such file or directory: 
u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
Traceback (most recent call last):
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 202, in run
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
obj.start()
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 285, in start
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
self.run()
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 150, in run
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
ngen = self.generate(gen_dict[section_name], self.gen_ts)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
ngen += self.generate(section[subsection], gen_ts)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
ngen += self.generate(section[subsection], gen_ts)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 309, in generate
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
default_binding)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 376, in _getSearchList
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
searchList += obj.get_extension_list(timespan, db_lookup)
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine: 
File "/home/weewx/bin/user/belchertown.py", line 585, in get_extension_list
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
raise Warning( "Error writing forecast info to %s. Reason: %s" % ( 
forecast_file, e) )
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
Warning: Error writing forecast info to 
/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json. Reason: 
[Errno 2] No such file or directory: 
u'/home/weewx/public_html/weather/belchertown/json/darksky_forecast.json'
Feb  7 16:50:26 srvr weewx[23592] ERROR weewx.reportengine:   
Generator terminated
Feb  7 16:50:26 srvr weewx[23592] INFO weewx.reportengine: Copied 31 files to 
/home/weewx/public_html/weather/belchertown
Feb  7 16:50:26 srvr weewx[23592] INFO weewx.restx: Weather365: Published 
record 2020-02-07 16:50:00 EST (1581112200)
Feb  7 16:50:26 srvr weewx[23592] INFO weewx.restx: WeatherCloud: Published 
record 2020-02-07 16:50:00 EST (1581112200)

root@srvr:~# /home/weewx/bin/wee_reports
Using configuration file /home/weewx/weewx.conf
Generating for all time
Traceback (most recent call last):
  File "/home/weewx/bin/weewx/reportengine.py", line 202, in run
obj.start()
  File "/home/weewx/bin/weewx/reportengine.py", line 285, in start
self.run()
  File "/home/weewx/bin/weewx/cheetahgenerator.py", line 150, in run
ngen = self.generate(gen_dict[section_name], self.gen_ts)
  File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
ngen += self.generate(section[subsection], gen_ts)
  File "/home/weewx/bin/weewx/cheetahgenerator.py", line 220, in generate
ngen += self.generate(section[subsection], gen_ts)
  File "/home/weewx/bin/weewx/cheetahgenerator.py", line 309, in generate
default_binding)
  File "/home/we

[weewx-user] Re: wanted: users with ecowitt gw1000 wifi bridge

2020-01-29 Thread G Hammer

Thanks for that. Been wanting to have battery status appear, but wasn't 
wanting to change the driver.
I couldn't find where the extensions were documented, so left things alone 
as it is a nice to have.
As a plus, this is the first time I've seen mention of rain_total since 
I've used Interceptor.
Jan 29 20:09:40 srvr weewx[13658] INFO user.interceptor: using 'totalrainin' 
for rain_total



On Wednesday, January 29, 2020 at 7:21:32 PM UTC-5, mwall wrote:
>
>
>
> On Wednesday, January 29, 2020 at 11:58:09 AM UTC-5, Vetti52 wrote:
>>
>> At the moment, I do all the changes directly in interceptor.py, as this 
>> is up to now the only way, I can understand, what I am doing. But, maybe, I 
>> should better manage to put all these things into my weewx.conf section 
>> [[sensor_map_extensions]], if not fixed otherwise.
>>
>
> you should put your customizations in the weewx configuration file.
>
> for example, to map wh65_battery to the database field txBatteryStatus, do 
> this:
>
> [Interceptor]
> ...
> [[sensor_map_extensions]]
> txBatteryStatus = wh65_battery
>
> that way you get all the standard mappings, and just override the 
> txBatteryStatus
>
> m 
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/5ab4a84b-91f1-4ad8-80dd-9fdde7979b71%40googlegroups.com.

Re: [weewx-user] cheetah error a/ upgrade to v4.0.0b9 commit a85e320c

2020-01-26 Thread G Hammer

I just finished a new install on a new machine.
b10 works fine with Python 2.7.17 and default skin.


On Friday, January 24, 2020 at 6:34:14 PM UTC-5, Thomas Keffer wrote:
>
> Could you all do a pull and give it another try? The flow path between 
> byte strings and unicode are more controlled now, making the results less 
> prone to decode errors.
>
> At least, that's the theory!
>
> -tk
>
> On Thu, Jan 23, 2020 at 8:48 PM P Simmons > 
> wrote:
>
>>
>> Updated to db1b41e, problem solved.
>>
>> Thanks!
>>
>> Paul
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/a7dc4e3c-a223-4344-ba8e-f4fd58a23168%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/eb769a14-6d7e-4a24-a1d2-d58cea71f3fb%40googlegroups.com.

[weewx-user] Re: help with ambient weather 2902 / interceptor / pihole

2020-01-24 Thread G Hammer



My experience with getting the data using Interceptor is that it's a pain. 
I tried the DNS spoofing, setting up an AP on the weewx machine and 
sniffing the data (worked best), iptables in my router. None were really 
good as there were too many moving parts. I then used the SDR method and it 
worked fine once the receiver was in just the right place. Then, as happens 
with radio, a sensor was lost and never regained.
I found the GW1000 method and have not looked back. Dead simple. MWall has 
written a driver for it.

If you really just want to use the Interceptor network method, I'd suggest 
simplifying your overall design then introduce additional items one at a 
time.

Me? I'm firmly in the simple camp with the GW1000.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0844c61c-ddfd-471b-ace3-96f2c642de96%40googlegroups.com.

Re: [weewx-user] Re: Belchertown MQTT not generating real time data...

2020-01-22 Thread G Hammer

Working great from here.
I too have incorrigible fingers when writing configs.

On Wed, Jan 22, 2020, 2:47 PM Gordon Dickens  wrote:

> Hello Mr. Hammer,
>
> I believe that I have fixed everything.  Please check my site now at
>
> https://crabapple.dickens.com
>
> For some reason, I thought that the websocket port was udp and so I
> therefore set up iptables wrong.  As soon as I changed the websockets
> iptables rule to tcp then everything started working from outside of my
> firewall.  As I mentioned, everything had been working from behind my
> firewall on my local network since January 19 and I did not realize that I
> had dumb-thumbed the websocket iptables rules until you pointed it out. I
> should have tested for that but..
>
> Thanks again for reviewing my site and letting me know that it wasn't
> working properly!
>
> Gordon
>
>
>
> It must be a firewall issue since it works great from inside my local
> network. Just so you know, I have been able to reproduce it not working
> from outside my firewall.  I will fix this today and let you know when its
> working.  Thanks very much for taking the time to le me know!
>
> Gordon
>
>
>
> On Wednesday, January 22, 2020 at 8:34:14 AM UTC-5, G Hammer wrote:
>>
>> Using a different computer then my phone, no data.
>>
>>
>> On Wed, Jan 22, 2020, 8:25 AM Gordon Dickens  wrote:
>>
>>> Hello Mr. Hammer,
>>>
>>> Its working on all of my devices and my wife's devices both under Linux,
>>> Windows, Android and iphone.  Please try a different browser and/or clear
>>> the cache and delete browser history for crabapple.dickens.com.
>>> Otherwise, I cannot recreate what you are seeing.
>>>
>>> Thanks!
>>>
>>> Gordon
>>>
>>>
>>> On Wednesday, January 22, 2020 at 7:49:47 AM UTC-5, G Hammer wrote:
>>>>
>>>> No, I still don't get MQTT data when I connect using the Dickens domain
>>>> address.
>>>>
>>>>
>>>> On Wed, Jan 22, 2020, 7:31 AM Gordon Dickens 
>>>> wrote:
>>>>
>>>>> Hi Ryan Kramer and G. Hammer,
>>>>>
>>>>> Thanks for replying, however, I got everything working three days ago
>>>>> on January 19 as per this post:
>>>>>
>>>>> https://groups.google.com/d/msg/weewx-user/HRhNyrWRIn0/X2fAHkfGEQAJ
>>>>>
>>>>> Then, yesterday, I spent most of the day switching the domain from
>>>>> zeebytes.org to crabapple.dickens.com and installing a new SSL
>>>>> certificate for crabapple.dickens.com.  You both apparently missed my
>>>>> earlier post within which I said that I had it fixed (under the
>>>>> zeebytes.org domain) and then subsequently started trying to diagnose
>>>>> my installation while I was simultaneously switching domain names and,
>>>>> therefore, encountered the issues that you discussed.  I am sure that the
>>>>> issues that you saw were bizarre since I was reinstallling everything 
>>>>> while
>>>>> you watched and tried to evaluate the site...
>>>>>
>>>>> I believe that everything is working properly now, however, it is a
>>>>> brand new installation configuration and so I will not be surprised if we
>>>>> don't see other issues before I get it totally sorted out over the next 
>>>>> few
>>>>> days.
>>>>>
>>>>> Thanks again!
>>>>>
>>>>> Gordon
>>>>>
>>>>>
>>>>>
>>>>> On Tuesday, January 21, 2020 at 9:32:45 PM UTC-5, G Hammer wrote:
>>>>>>
>>>>>> When I go to the site you gave zeebytes.org, I actually get
>>>>>> crabapple.dickens.com
>>>>>> Redirects are possible, but I have no idea where to start since I
>>>>>> haven't configured any for my domain.
>>>>>>
>>>>>> That is where MQTT is attempting to connect as well.
>>>>>>
>>>>>> mqttws31.min.js:36 WebSocket connection to 'wss://
>>>>>> crabapple.dickens.com:9001/mqtt' failed: Error in connection
>>>>>> establishment: net::ERR_CONNECTION_TIMED_OUT
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>> You received this message because you are subscribed to a topic in the
>>>>> Google Groups "weewx-

Re: [weewx-user] Re: Belchertown MQTT not generating real time data...

2020-01-22 Thread G Hammer

No, I still don't get MQTT data when I connect using the Dickens domain
address.


On Wed, Jan 22, 2020, 7:31 AM Gordon Dickens  wrote:

> Hi Ryan Kramer and G. Hammer,
>
> Thanks for replying, however, I got everything working three days ago on
> January 19 as per this post:
>
> https://groups.google.com/d/msg/weewx-user/HRhNyrWRIn0/X2fAHkfGEQAJ
>
> Then, yesterday, I spent most of the day switching the domain from
> zeebytes.org to crabapple.dickens.com and installing a new SSL
> certificate for crabapple.dickens.com.  You both apparently missed my
> earlier post within which I said that I had it fixed (under the
> zeebytes.org domain) and then subsequently started trying to diagnose my
> installation while I was simultaneously switching domain names and,
> therefore, encountered the issues that you discussed.  I am sure that the
> issues that you saw were bizarre since I was reinstallling everything while
> you watched and tried to evaluate the site...
>
> I believe that everything is working properly now, however, it is a brand
> new installation configuration and so I will not be surprised if we don't
> see other issues before I get it totally sorted out over the next few days.
>
> Thanks again!
>
> Gordon
>
>
>
> On Tuesday, January 21, 2020 at 9:32:45 PM UTC-5, G Hammer wrote:
>>
>> When I go to the site you gave zeebytes.org, I actually get
>> crabapple.dickens.com
>> Redirects are possible, but I have no idea where to start since I haven't
>> configured any for my domain.
>>
>> That is where MQTT is attempting to connect as well.
>>
>> mqttws31.min.js:36 WebSocket connection to 'wss://
>> crabapple.dickens.com:9001/mqtt' failed: Error in connection
>> establishment: net::ERR_CONNECTION_TIMED_OUT
>>
>>
>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/HRhNyrWRIn0/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/b1090316-8534-46de-9595-ab8e60bdb5f0%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/b1090316-8534-46de-9595-ab8e60bdb5f0%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-0GTKEHwjvS0hu%2BnCWjjrP0Jx9__mC4%2BJhxWH9Whni9fw%40mail.gmail.com.

Re: [weewx-user] Re: Belchertown MQTT not generating real time data...

2020-01-21 Thread G Hammer

When I go to the site you gave zeebytes.org, I actually get 
crabapple.dickens.com
Redirects are possible, but I have no idea where to start since I haven't 
configured any for my domain.

That is where MQTT is attempting to connect as well.

mqttws31.min.js:36 WebSocket connection to 
'wss://crabapple.dickens.com:9001/mqtt' failed: Error in connection 
establishment: net::ERR_CONNECTION_TIMED_OUT



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2df8eb6d-2f96-4488-9921-0613114f1f19%40googlegroups.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Excellent info, appreciated!

On Sunday, January 19, 2020 at 7:52:14 PM UTC-5, Thomas Keffer wrote:
>
> Be sure to read the article *Python 3 strategy 
> <https://github.com/weewx/weewx/wiki/Python-3-strategy>* in the WeeWX 
> Wiki.
>
> -tk
>
> On Sun, Jan 19, 2020 at 2:04 PM G Hammer > 
> wrote:
>
>> When I install the new system Tuesday, I plan to only install python 3.
>> Hopefully there won't be many changes that need done manually, but I'll 
>> see what transpires.
>>
>> Thanks!
>>
>>
>> On Sunday, January 19, 2020 at 2:23:19 PM UTC-5, vince wrote:
>>>
>>> On Sunday, January 19, 2020 at 8:14:00 AM UTC-8, G Hammer wrote:
>>>>
>>>> Thanks for the tips, I'm going to see if I am able to get it working 
>>>> under python 3 as that seems to be the future. Good to know that it may 
>>>> run 
>>>> as is with WeeWX 4.
>>>>
>>>>
>>>>
>>> Just run it through "2to3 -w" to have it make the most usual changes.  
>>> That should get you close.
>>>
>>> Be sure if you're using python3 to install the python3 versions of all 
>>> the modules required for weewx.
>>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/c317f3c6-6472-4591-a8e2-59a40c3f657e%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/c317f3c6-6472-4591-a8e2-59a40c3f657e%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bd3f8dd6-7578-4ee9-8326-3cfcaa57bcae%40googlegroups.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

When I install the new system Tuesday, I plan to only install python 3.
Hopefully there won't be many changes that need done manually, but I'll see 
what transpires.

Thanks!


On Sunday, January 19, 2020 at 2:23:19 PM UTC-5, vince wrote:
>
> On Sunday, January 19, 2020 at 8:14:00 AM UTC-8, G Hammer wrote:
>>
>> Thanks for the tips, I'm going to see if I am able to get it working 
>> under python 3 as that seems to be the future. Good to know that it may run 
>> as is with WeeWX 4.
>>
>>
>>
> Just run it through "2to3 -w" to have it make the most usual changes. 
>  That should get you close.
>
> Be sure if you're using python3 to install the python3 versions of all the 
> modules required for weewx.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c317f3c6-6472-4591-a8e2-59a40c3f657e%40googlegroups.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Thanks for the tips, I'm going to see if I am able to get it working under 
python 3 as that seems to be the future. Good to know that it may run as is 
with WeeWX 4.


On Sunday, January 19, 2020 at 12:04:33 AM UTC-5, gjr80 wrote:
>
> As John said the code has not been ported to WeeWX v4 and definitely will 
> not run under WeeWX v4/python 3. That being said, it may work with WeeWX v4 
> when run under python 2; looking through the code quickly I don't see 
> anything that obviously will not work under WeeWX v4/python 2. WeeWX v4 
> logging has changed, with the syslog module no longer being used; however, 
> that will not prevent the extension from running under WeeWX v4/python 2, 
> you will just find the RainMachine log entries will be formatted a little 
> differently.
>
> Its a fairly basic small extension which can be easily and fully ported to 
> WeeWX v4 python 2/3. If you get stuck sing out and we can port it for you.
>
> Gary
>
> On Sunday, 19 January 2020 14:51:42 UTC+10, John Kline wrote:
>>
>> I had a quick look.  It imports Queue (with a capital ‘Q’).  That will 
>> fail in python 3.
>> As such, this has not been ported.
>>
>> As for an answer to the general question, there are tools available to 
>> convert code (2to3, modernize).  It usually requires more work than that, 
>> but you could run one of them on the code to see what it changes.  That 
>> would give you a good idea of whether it is already python3 ready.
>>
>> Actually, a better way is just to read up on the subject.  When you do, 
>> it will be pretty easy to spot code that will run in 2 and 3.
>>
>> On Jan 18, 2020, at 8:39 PM, G Hammer  wrote:
>>
>> 
>> Seems that there should be a way to determine this as the change to 
>> Python 3 isn't just a WeeWX thing.
>>
>> As for whether or not to run the beta, it's beta 8 and what I use seems 
>> to be ok as far as reports go. Is it not what beta are for after all?
>>
>> Anyway, not what I asked, so let's see what else comes.
>>
>> On Sat, Jan 18, 2020, 11:14 PM Andrew Milner  
>> wrote:
>>
>>> I do not think v4 has officially been released yet - so I would 
>>> recommend installing the new hardware with 3.9 and do the upgrade when v4 
>>> is finally released.  That way you do not change the whole shebang - 
>>> hardware and software - in one giant leap. Regarding 'how do you know' - 
>>> the answer is that you don't!!  The original writer may update wike or 
>>> download with additional information, or another user may post a comment, 
>>> but there is no automatic verification process of all extensions written by 
>>> other people.
>>>
>>>
>>>
>>>
>>> On Sunday, 19 January 2020 04:46:16 UTC+2, G Hammer wrote:
>>>>
>>>> I'd like to run v4 when I upgrade hardware this week.
>>>> Seems to be doing fine for the devices and skin I use.
>>>> With one exception, a RainMachine extension.
>>>> There is one that was written by someone at RainMachine, but I think he 
>>>> has moved on.
>>>> I've asked there and raised an issue on the github page for the 
>>>> extension with no response.
>>>>
>>>> How, besides installing v4 and the extension, can I determine if it 
>>>> will run under v4?
>>>>
>>>> The extension is located at 
>>>> https://github.com/sprinkler/rainmachine-weewx and referenced at 
>>>> https://github.com/weewx/weewx/wiki/RainMachine
>>>>
>>>> With this functionality confirmed, I can make the change, without it 
>>>> I'll need to stay with v3
>>>>
>>>>
>>>> -- 
>>> You received this message because you are subscribed to a topic in the 
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit 
>>> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to 
>>> weewx...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com
>>>  
>>> <https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" g

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Thanks for the information, I'll see if I'm able to get it ported.

On Saturday, January 18, 2020 at 11:51:42 PM UTC-5, John Kline wrote:
>
> I had a quick look.  It imports Queue (with a capital ‘Q’).  That will 
> fail in python 3.
> As such, this has not been ported.
>
> As for an answer to the general question, there are tools available to 
> convert code (2to3, modernize).  It usually requires more work than that, 
> but you could run one of them on the code to see what it changes.  That 
> would give you a good idea of whether it is already python3 ready.
>
> Actually, a better way is just to read up on the subject.  When you do, it 
> will be pretty easy to spot code that will run in 2 and 3.
>
> On Jan 18, 2020, at 8:39 PM, G Hammer > 
> wrote:
>
> 
> Seems that there should be a way to determine this as the change to Python 
> 3 isn't just a WeeWX thing.
>
> As for whether or not to run the beta, it's beta 8 and what I use seems to 
> be ok as far as reports go. Is it not what beta are for after all?
>
> Anyway, not what I asked, so let's see what else comes.
>
> On Sat, Jan 18, 2020, 11:14 PM Andrew Milner  > wrote:
>
>> I do not think v4 has officially been released yet - so I would recommend 
>> installing the new hardware with 3.9 and do the upgrade when v4 is finally 
>> released.  That way you do not change the whole shebang - hardware and 
>> software - in one giant leap. Regarding 'how do you know' - the answer is 
>> that you don't!!  The original writer may update wike or download with 
>> additional information, or another user may post a comment, but there is no 
>> automatic verification process of all extensions written by other people.
>>
>>
>>
>>
>> On Sunday, 19 January 2020 04:46:16 UTC+2, G Hammer wrote:
>>>
>>> I'd like to run v4 when I upgrade hardware this week.
>>> Seems to be doing fine for the devices and skin I use.
>>> With one exception, a RainMachine extension.
>>> There is one that was written by someone at RainMachine, but I think he 
>>> has moved on.
>>> I've asked there and raised an issue on the github page for the 
>>> extension with no response.
>>>
>>> How, besides installing v4 and the extension, can I determine if it will 
>>> run under v4?
>>>
>>> The extension is located at 
>>> https://github.com/sprinkler/rainmachine-weewx and referenced at 
>>> https://github.com/weewx/weewx/wiki/RainMachine
>>>
>>> With this functionality confirmed, I can make the change, without it 
>>> I'll need to stay with v3
>>>
>>>
>>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx...@googlegroups.com .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/CALBRR-09JohVQPwKLeyHfVBW6DV1KdZOP5QhLzTm3ms01teygA%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/weewx-user/CALBRR-09JohVQPwKLeyHfVBW6DV1KdZOP5QhLzTm3ms01teygA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/98528562-590a-4773-984c-d8942be1ab1a%40googlegroups.com.

[weewx-user] Re: Belchertown MQTT not generating real time data...

Glad to hear it is working now.

On Sunday, January 19, 2020 at 10:36:14 AM UTC-5, Gordon Dickens wrote:
>
> I got it working.  I'm not sure exactly why but I think the problem was 
> related to running the site with https while running Belchertown with 
> mqtt_websockets_ssl = 0.  As soon as I amended my apache2 config so that 
> weewx was running unencrypted with htttp instead of https then it started 
> working.  I plan to subsequently amend apache2 and weewx/Belchertown to run 
> encrypted with ssl and https.  As an FYI,
> my weewx/Belchertown config files that worked are as follows:
>
> weewx.conf:
>
> [[MQTT]]
> server_url = mqtt://:@localhost:1883/
> topic = weather
> unit_system = US
> binding = archive, loop
> aggregation = aggregate
>
> Belchertown skin.conf:
>
> # MQTT Websockets defaults
> mqtt_websockets_enabled = 1
> mqtt_websockets_host = "zeebytes.org"
> mqtt_websockets_port = 9001
> mqtt_websockets_ssl = 0
> mqtt_websockets_topic = "weather/loop"
> disconnect_live_website_visitor = 180
>
> On Saturday, January 18, 2020 at 12:55:36 PM UTC-5, G Hammer wrote:
>>
>> I also had to change from mqtt_websockets_host = "localhost" to 
>> mqtt_websockets_host = "FQDN" with FQDN being the full public name of the 
>> server.
>>
>> On Saturday, January 18, 2020 at 8:48:36 AM UTC-5, Gordon Dickens wrote:
>>>
>>> Hello everybody,
>>>
>>> I have the Belchertown skin up and running nicely and so I decided to 
>>> enable MQTT.  I successfully installed mosquitto and endeavored to enable 
>>> MTTQ with Belchertown/weewx.  However, Belchertown/weewx is not doing 
>>> realtime updates as it is supposed to and displays either "Connecting to 
>>> weather station real time data" (with firefox) or "Failed connecting to the 
>>> weather station. Please try again later!" (with chrome, chromium or 
>>> Konqueror) according to which browser I am using.
>>>
>>> I am confident that mosquitto is working properly since I am able to 
>>> manually receive mosquitto output with the command, "mosquitto_sub -h 
>>> localhost -t weather/#", which generates lots of weather data every two 
>>> seconds. Also, my logs show MQTT posting every two seconds as follows:
>>>
>>> Jan 17 17:46:27 zeebytes.org weewx[22287]: restx: MQTT: Published 
>>> record 2020-01-17 17:46:27 EST (1579301187)
>>>
>>> Here is my MQTT setup in weewx.conf:
>>>
>>> [[MQTT]]
>>> server_url = mqtt://:@localhost:1883/
>>> topic = weather
>>> unit_system = US
>>> binding = archive, loop
>>> aggregation = aggregate
>>>
>>> Here is my MQTT setup in the Belchertown skin.conf:
>>>
>>> # MQTT Websockets defaults
>>> mqtt_websockets_enabled = 1
>>> mqtt_websockets_host = "localhost"
>>> mqtt_websockets_port = 9001
>>> mqtt_websockets_ssl = 0
>>> mqtt_websockets_topic = "weather/#"
>>> disconnect_live_website_visitor = 180
>>>  
>>> I am running Debian 10 and apache2.
>>>
>>> You may view the site at https://zeebytes.org
>>>
>>> I hope that someone can tell me what I am doing wrong!
>>>
>>> Thanks,
>>>
>>> Gordon
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4d579868-9528-4bb3-a48c-91a4de982fb4%40googlegroups.com.

Re: [weewx-user] Re: WeeWX v4 I Need an Extension Verified/Checked

Seems that there should be a way to determine this as the change to Python
3 isn't just a WeeWX thing.

As for whether or not to run the beta, it's beta 8 and what I use seems to
be ok as far as reports go. Is it not what beta are for after all?

Anyway, not what I asked, so let's see what else comes.

On Sat, Jan 18, 2020, 11:14 PM Andrew Milner 
wrote:

> I do not think v4 has officially been released yet - so I would recommend
> installing the new hardware with 3.9 and do the upgrade when v4 is finally
> released.  That way you do not change the whole shebang - hardware and
> software - in one giant leap. Regarding 'how do you know' - the answer is
> that you don't!!  The original writer may update wike or download with
> additional information, or another user may post a comment, but there is no
> automatic verification process of all extensions written by other people.
>
>
>
>
> On Sunday, 19 January 2020 04:46:16 UTC+2, G Hammer wrote:
>>
>> I'd like to run v4 when I upgrade hardware this week.
>> Seems to be doing fine for the devices and skin I use.
>> With one exception, a RainMachine extension.
>> There is one that was written by someone at RainMachine, but I think he
>> has moved on.
>> I've asked there and raised an issue on the github page for the extension
>> with no response.
>>
>> How, besides installing v4 and the extension, can I determine if it will
>> run under v4?
>>
>> The extension is located at
>> https://github.com/sprinkler/rainmachine-weewx and referenced at
>> https://github.com/weewx/weewx/wiki/RainMachine
>>
>> With this functionality confirmed, I can make the change, without it I'll
>> need to stay with v3
>>
>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/wlufg8AdT0E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/e95133ce-4a77-43db-930f-facf0e73e5e8%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALBRR-09JohVQPwKLeyHfVBW6DV1KdZOP5QhLzTm3ms01teygA%40mail.gmail.com.

[weewx-user] WeeWX v4 I Need an Extension Verified/Checked

I'd like to run v4 when I upgrade hardware this week.
Seems to be doing fine for the devices and skin I use.
With one exception, a RainMachine extension.
There is one that was written by someone at RainMachine, but I think he has 
moved on.
I've asked there and raised an issue on the github page for the extension 
with no response.

How, besides installing v4 and the extension, can I determine if it will 
run under v4?

The extension is located at https://github.com/sprinkler/rainmachine-weewx and 
referenced at https://github.com/weewx/weewx/wiki/RainMachine

With this functionality confirmed, I can make the change, without it I'll 
need to stay with v3


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8b4d8a99-3639-4c99-a7e4-511d084536f9%40googlegroups.com.

[weewx-user] Re: Belchertown MQTT not generating real time data...

I also had to change from mqtt_websockets_host = "localhost" to 
mqtt_websockets_host = "FQDN" with FQDN being the full public name of the 
server.

On Saturday, January 18, 2020 at 8:48:36 AM UTC-5, Gordon Dickens wrote:
>
> Hello everybody,
>
> I have the Belchertown skin up and running nicely and so I decided to 
> enable MQTT.  I successfully installed mosquitto and endeavored to enable 
> MTTQ with Belchertown/weewx.  However, Belchertown/weewx is not doing 
> realtime updates as it is supposed to and displays either "Connecting to 
> weather station real time data" (with firefox) or "Failed connecting to the 
> weather station. Please try again later!" (with chrome, chromium or 
> Konqueror) according to which browser I am using.
>
> I am confident that mosquitto is working properly since I am able to 
> manually receive mosquitto output with the command, "mosquitto_sub -h 
> localhost -t weather/#", which generates lots of weather data every two 
> seconds. Also, my logs show MQTT posting every two seconds as follows:
>
> Jan 17 17:46:27 zeebytes.org weewx[22287]: restx: MQTT: Published record 
> 2020-01-17 17:46:27 EST (1579301187)
>
> Here is my MQTT setup in weewx.conf:
>
> [[MQTT]]
> server_url = mqtt://:@localhost:1883/
> topic = weather
> unit_system = US
> binding = archive, loop
> aggregation = aggregate
>
> Here is my MQTT setup in the Belchertown skin.conf:
>
> # MQTT Websockets defaults
> mqtt_websockets_enabled = 1
> mqtt_websockets_host = "localhost"
> mqtt_websockets_port = 9001
> mqtt_websockets_ssl = 0
> mqtt_websockets_topic = "weather/#"
> disconnect_live_website_visitor = 180
>  
> I am running Debian 10 and apache2.
>
> You may view the site at https://zeebytes.org
>
> I hope that someone can tell me what I am doing wrong!
>
> Thanks,
>
> Gordon
>
>
>
>
>
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fbc8ce3d-bfb6-4dd0-9725-c23dfa5c66b4%40googlegroups.com.

[weewx-user] Re: Belchertown MQTT not generating real time data...