[weewx-user] Re: WH65B no pressure
I did the same. I will be taking a swing at the WH32B this weekend to capture data to be added as a new device, but the WH25 worked with 30 seconds of setup. On Friday, February 8, 2019 at 10:52:06 AM UTC-6, G Hammer wrote: > > You can purchase a WH25B then you'll have indoor temp humidity and > barometer with SDR. > I spent quite a bit of time on sniffing the data and eventually decided to > get the dongle and WH25B and forget Interceptor. > > > On Tuesday, January 1, 2019 at 7:03:59 AM UTC-5, Zsolt Máté wrote: >> >> I tried, something is not working or I'm doing something wrong. >> >> On Wednesday, January 2, 2019 at 12:53:42 AM UTC+13, Andrew Milner wrote: >>> >>> with the interceptor driver >>> >>> >>> >>> On Tuesday, 1 January 2019 13:42:18 UTC+2, Zsolt Máté wrote: I ran tcpdump on my router an I got this: GET /weatherstation/updateweatherstation.php?ID=*&PASSWORD=&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 HTTP/1.0 The question is, how can I intercept and interpret this communication from my raspi? On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: > > The console has no USB port, it's communicating via WiFi. > > On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: >> >> >> >> On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: >>> >>> >>> Is there a way to get the barometer readout as well? >>> >> >> not using rtl_433/weewx-sdr. the pressure sensor is located in your >> weather station console, so the pressure data are never sent. rtl_433 >> picks up only the transmissions from the instrument cluster (and any >> remote >> temperature/humidity sensors), not the console. >> >> you'll have to intercept the data sent by the console (e.g., using >> the weewx-interceptor driver) or figure out some way to probe the >> console >> for data (does it have a usb port that responds to data requests?) >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
You can purchase a WH25B then you'll have indoor temp humidity and barometer with SDR. I spent quite a bit of time on sniffing the data and eventually decided to get the dongle and WH25B and forget Interceptor. On Tuesday, January 1, 2019 at 7:03:59 AM UTC-5, Zsolt Máté wrote: > > I tried, something is not working or I'm doing something wrong. > > On Wednesday, January 2, 2019 at 12:53:42 AM UTC+13, Andrew Milner wrote: >> >> with the interceptor driver >> >> >> >> On Tuesday, 1 January 2019 13:42:18 UTC+2, Zsolt Máté wrote: >>> >>> I ran tcpdump on my router an I got this: >>> GET >>> /weatherstation/updateweatherstation.php?ID=*&PASSWORD=&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 >>> >>> HTTP/1.0 >>> >>> The question is, how can I intercept and interpret this communication >>> from my raspi? >>> >>> On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: The console has no USB port, it's communicating via WiFi. On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: > > > > On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: >> >> >> Is there a way to get the barometer readout as well? >> > > not using rtl_433/weewx-sdr. the pressure sensor is located in your > weather station console, so the pressure data are never sent. rtl_433 > picks up only the transmissions from the instrument cluster (and any > remote > temperature/humidity sensors), not the console. > > you'll have to intercept the data sent by the console (e.g., using the > weewx-interceptor driver) or figure out some way to probe the console for > data (does it have a usb port that responds to data requests?) > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
I tried, something is not working or I'm doing something wrong. On Wednesday, January 2, 2019 at 12:53:42 AM UTC+13, Andrew Milner wrote: > > with the interceptor driver > > > > On Tuesday, 1 January 2019 13:42:18 UTC+2, Zsolt Máté wrote: >> >> I ran tcpdump on my router an I got this: >> GET >> /weatherstation/updateweatherstation.php?ID=*&PASSWORD=&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 >> >> HTTP/1.0 >> >> The question is, how can I intercept and interpret this communication >> from my raspi? >> >> On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: >>> >>> The console has no USB port, it's communicating via WiFi. >>> >>> On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: > > > Is there a way to get the barometer readout as well? > not using rtl_433/weewx-sdr. the pressure sensor is located in your weather station console, so the pressure data are never sent. rtl_433 picks up only the transmissions from the instrument cluster (and any remote temperature/humidity sensors), not the console. you'll have to intercept the data sent by the console (e.g., using the weewx-interceptor driver) or figure out some way to probe the console for data (does it have a usb port that responds to data requests?) m >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
with the interceptor driver On Tuesday, 1 January 2019 13:42:18 UTC+2, Zsolt Máté wrote: > > I ran tcpdump on my router an I got this: > GET > /weatherstation/updateweatherstation.php?ID=*&PASSWORD=&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 > > HTTP/1.0 > > The question is, how can I intercept and interpret this communication from > my raspi? > > On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: >> >> The console has no USB port, it's communicating via WiFi. >> >> On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: >>> >>> >>> >>> On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: Is there a way to get the barometer readout as well? >>> >>> not using rtl_433/weewx-sdr. the pressure sensor is located in your >>> weather station console, so the pressure data are never sent. rtl_433 >>> picks up only the transmissions from the instrument cluster (and any remote >>> temperature/humidity sensors), not the console. >>> >>> you'll have to intercept the data sent by the console (e.g., using the >>> weewx-interceptor driver) or figure out some way to probe the console for >>> data (does it have a usb port that responds to data requests?) >>> >>> m >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
I ran tcpdump on my router an I got this: GET /weatherstation/updateweatherstation.php?ID=*&PASSWORD=&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 HTTP/1.0 The question is, how can I intercept and interpret this communication from my raspi? On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: > > The console has no USB port, it's communicating via WiFi. > > On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: >> >> >> >> On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: >>> >>> >>> Is there a way to get the barometer readout as well? >>> >> >> not using rtl_433/weewx-sdr. the pressure sensor is located in your >> weather station console, so the pressure data are never sent. rtl_433 >> picks up only the transmissions from the instrument cluster (and any remote >> temperature/humidity sensors), not the console. >> >> you'll have to intercept the data sent by the console (e.g., using the >> weewx-interceptor driver) or figure out some way to probe the console for >> data (does it have a usb port that responds to data requests?) >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
The console has no USB port, it's communicating via WiFi. On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: > > > > On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: >> >> >> Is there a way to get the barometer readout as well? >> > > not using rtl_433/weewx-sdr. the pressure sensor is located in your > weather station console, so the pressure data are never sent. rtl_433 > picks up only the transmissions from the instrument cluster (and any remote > temperature/humidity sensors), not the console. > > you'll have to intercept the data sent by the console (e.g., using the > weewx-interceptor driver) or figure out some way to probe the console for > data (does it have a usb port that responds to data requests?) > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: WH65B no pressure
On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: > > > Is there a way to get the barometer readout as well? > not using rtl_433/weewx-sdr. the pressure sensor is located in your weather station console, so the pressure data are never sent. rtl_433 picks up only the transmissions from the instrument cluster (and any remote temperature/humidity sensors), not the console. you'll have to intercept the data sent by the console (e.g., using the weewx-interceptor driver) or figure out some way to probe the console for data (does it have a usb port that responds to data requests?) m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.