[weewx-user] Re: WeeWX 4.6.2 Working Well
Thanks, Gary! you were right it was pretty self-explanatory and much more straightforward than using the sniffer. I am now up and running with VP2, Weewx 4.9.1, WifiLogger2, and Belchertown skin 1.3b2. On Wednesday, November 16, 2022 at 6:18:11 PM UTC-5 gary@gmail.com wrote: > No, no need for anything other than the in-built driver. > Pretty self explanatory once you config with the Davis driver. > > > ## > > [Vantage] > # This section is for the Davis Vantage series of weather stations. > > # Connection type: serial or ethernet > # serial (the classic VantagePro) > # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) > type = ethernet > > # If the connection type is serial, a port must be specified: > # Debian, Ubuntu, Redhat, Fedora, and SuSE: > # /dev/ttyUSB0 is a common USB port name > # /dev/ttyS0 is a common serial port name > # BSD: > # /dev/cuaU0 is a common serial port name > port = /dev/ttyUSB0 > > # If the connection type is ethernet, an IP Address/hostname is > required: > host = 10.10.10.10 > > ## > # The rest of this section rarely needs any attention. > # You can safely leave it "as is." > ## > > # Serial baud rate (usually 19200) > baudrate = 19200 > > # TCP port (when using the WeatherLinkIP) > tcp_port = 2 > > # TCP send delay (when using the WeatherLinkIP): > tcp_send_delay = 0.5 > > # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both > loop_request = 3 > > # The id of your ISS station (usually 1). If you use a wind meter > connected > # to a anemometer transmitter kit, use its id > iss_id = 1 > > # How long to wait for a response from the station before giving up (in > # seconds; must be greater than 2) > timeout = 4 > > # How long to wait before trying again (in seconds) > wait_before_retry = 1.2 > > # How many times to try before giving up: > max_tries = 4 > > # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 > model_type = 2 > > # The driver to use: > driver = weewx.drivers.vantage > > > ## > On Wednesday, November 16, 2022 at 12:30:00 PM UTC-5 Kev D wrote: > >> Hi Gary, >> >> I have just upgraded my setup to VP2, WifiLogger2, and Belchertown skin >> as well. Would you mind sharing your configuration setup in weewx to grab >> data from the WifiLogger2? Are you also using the interceptor driver for >> this config? >> >> Thanks! >> >> On Friday, February 11, 2022 at 9:00:57 AM UTC-5 gary@gmail.com >> wrote: >> >>> With the rapid succession of releases, I just wanted to say that my >>> upgrade to 4.6.2 went well and all is working with the VP2, WifiLogger2, >>> and Belchertown skin. >>> >>> Thanks for an amazing system! >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/626023c4-1ec9-4dae-8800-31d4f2c30856n%40googlegroups.com.
[weewx-user] Re: WeeWX 4.6.2 Working Well
No, no need for anything other than the in-built driver. Pretty self explanatory once you config with the Davis driver. ## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) type = ethernet # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: host = 10.10.10.10 ## # The rest of this section rarely needs any attention. # You can safely leave it "as is." ## # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 2 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both loop_request = 3 # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 4 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 4 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: driver = weewx.drivers.vantage ## On Wednesday, November 16, 2022 at 12:30:00 PM UTC-5 Kev D wrote: > Hi Gary, > > I have just upgraded my setup to VP2, WifiLogger2, and Belchertown skin > as well. Would you mind sharing your configuration setup in weewx to grab > data from the WifiLogger2? Are you also using the interceptor driver for > this config? > > Thanks! > > On Friday, February 11, 2022 at 9:00:57 AM UTC-5 gary@gmail.com wrote: > >> With the rapid succession of releases, I just wanted to say that my >> upgrade to 4.6.2 went well and all is working with the VP2, WifiLogger2, >> and Belchertown skin. >> >> Thanks for an amazing system! >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ac88d0b0-6adf-4048-8359-b031954f188an%40googlegroups.com.
[weewx-user] Re: WeeWX 4.6.2 Working Well
Hi Gary, I have just upgraded my setup to VP2, WifiLogger2, and Belchertown skin as well. Would you mind sharing your configuration setup in weewx to grab data from the WifiLogger2? Are you also using the interceptor driver for this config? Thanks! On Friday, February 11, 2022 at 9:00:57 AM UTC-5 gary@gmail.com wrote: > With the rapid succession of releases, I just wanted to say that my > upgrade to 4.6.2 went well and all is working with the VP2, WifiLogger2, > and Belchertown skin. > > Thanks for an amazing system! > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2b9cc941-ecbb-448f-b00b-893968eb59b3n%40googlegroups.com.
