Re: [weewx-user] update to 4.7 weewx-multi error code (1) [solved]

2022-03-27 Thread Joachim Puttkammer 
I replaced the weewx (=weewx-multi) in the /etc/init.d folder with the 
normal weewx and then the upgrade finished without error, Then copied 
weewx-multi again as weewx in the /etc/init.d folder.
Next time I do the upgrade immediately
sudo wee_config --upgrade --config=/etc/weewx/instance.conf 
--dist-config=/etc/weewx/weewx.conf.dist
Joachim Puttkammer schrieb am Samstag, 26. März 2022 um 11:41:56 UTC+1:

> How can I solve the 'upgrade' problem? ( Raspberry pi 4 with Debian 
> Bullsey )
> Terminal command :  *sudo apt upgrade*
>   0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht 
> aktualisiert
> *1 not completely installed*
> 
> dpkg: Fehler beim Bearbeiten des Paketes weewx (--configure):
>  »installiertes weewx-Skript des Paketes post-installation«-Unterprozess 
> gab den *Fehlerwert 1 *zurück
> Trigger für libc-bin (2.31-13+rpt2+rpi1+deb11u2) werden verarbeitet ...
> Fehler traten auf beim Bearbeiten von:
>  weewx
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>
> Joachim Puttkammer schrieb am Samstag, 5. März 2022 um 14:07:34 UTC+1:
>
>> Thanks, the update was successful.
>> After the normal WeeWX upgrade, there was an error message:
>>
>> See "systemctl status weewx.service" and "journalctl -xe" for details.
>> invoke-rc.d: initscript weewx, action "start" failed.
>> ● weewx.service - LSB: weewx-multi
>>  Loaded: loaded (/etc/init.d/weewx; generated)
>>  Active: failed (Result: exit-code) since Sat 2022-03-05 13:44:34 
>> CET; 21ms ago
>>Docs: man:systemd-sysv-generator(8)
>> Process: 72952 ExecStart=/etc/init.d/weewx start (code=exited, 
>> status=1/FAILURE)
>>   Tasks: 2 (limit: 8987)
>> CPU: 1.649s
>>  CGroup: /system.slice/weewx.service
>>  ├─72966 python /usr/share/weewx/weewxd --daemon --log-label 
>> weewx-dav --pidfile=/var/run/weewx-dav.pid /etc/weewx/dav.conf
>>  └─72976 python /usr/share/weewx/weewxd --daemon --log-label 
>> weewx-eco --pidfile=/var/run/weewx-eco.pid /etc/weewx/eco.conf
>>
>> After :
>> sudo wee_config --upgrade --config=/etc/weewx/dav.conf 
>> --dist-config=/etc/weewx/weewx.conf.dist
>> and
>> sudo wee_config --upgrade --config=/etc/weewx/eco.conf 
>> --dist-config=/etc/weewx/weewx.conf.dist
>>
>> there was no error .
>>
>> gjr80 schrieb am Donnerstag, 3. März 2022 um 14:56:47 UTC+1:
>>
>>> I have a dual instance setup running and it's basically as Tom said, you 
>>> just upgrade WeeWX as normal. A WeeWX upgrade only upgrades weewx.conf 
>>> so once the upgrade is done I run the following command on each 
>>> instance config file (neither of my config files is named weewx.conf - 
>>> if you do use weewx.conf for one instance then of course it is upgraded 
>>> as part of the WeeWX upgrade so no need to 'upgrade' it again) to upgrade 
>>> the instance config files:
>>>
>>> $ cd /home/weewx
>>> $ ./bin/wee_config instance.conf --dist-config=weewx.conf.X.Y.Z --upgrade
>>>
>>> I run a setup.py install so for a package install the paths will be 
>>> different. sudo may also be required depending on your setup.
>>>
>>> Gary 
>>> On Thursday, 3 March 2022 at 23:14:26 UTC+10 tke...@gmail.com wrote:
>>>
 Not sure what you're asking. If all instances are using the same code 
 base, just update the code base. 

 On Thu, Mar 3, 2022 at 4:59 AM Joachim Puttkammer  
 wrote:

> How should I proceed with the update for weewx-multi (2 instances)?
>  
>
> -- 
> You received this message because you are subscribed to the Google 
> Groups "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/0c64229c-974c-4d8a-acb6-d53b27d2c352n%40googlegroups.com
>  
> 
> .
>


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fb289c52-b8ca-469c-ba55-9e5b7760f139n%40googlegroups.com.

Re: [weewx-user] update to 4.7 weewx-multi error code (1)

2022-03-26 Thread Joachim Puttkammer 
How can I solve the 'upgrade' problem? ( Raspberry pi 4 with Debian Bullsey 
)
Terminal command :  *sudo apt upgrade*
  0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht 
aktualisiert
*1 not completely installed*

dpkg: Fehler beim Bearbeiten des Paketes weewx (--configure):
 »installiertes weewx-Skript des Paketes post-installation«-Unterprozess 
gab den *Fehlerwert 1 *zurück
Trigger für libc-bin (2.31-13+rpt2+rpi1+deb11u2) werden verarbeitet ...
Fehler traten auf beim Bearbeiten von:
 weewx
E: Sub-process /usr/bin/dpkg returned an error code (1)


Joachim Puttkammer schrieb am Samstag, 5. März 2022 um 14:07:34 UTC+1:

> Thanks, the update was successful.
> After the normal WeeWX upgrade, there was an error message:
>
> See "systemctl status weewx.service" and "journalctl -xe" for details.
> invoke-rc.d: initscript weewx, action "start" failed.
> ● weewx.service - LSB: weewx-multi
>  Loaded: loaded (/etc/init.d/weewx; generated)
>  Active: failed (Result: exit-code) since Sat 2022-03-05 13:44:34 CET; 
> 21ms ago
>Docs: man:systemd-sysv-generator(8)
> Process: 72952 ExecStart=/etc/init.d/weewx start (code=exited, 
> status=1/FAILURE)
>   Tasks: 2 (limit: 8987)
> CPU: 1.649s
>  CGroup: /system.slice/weewx.service
>  ├─72966 python /usr/share/weewx/weewxd --daemon --log-label 
> weewx-dav --pidfile=/var/run/weewx-dav.pid /etc/weewx/dav.conf
>  └─72976 python /usr/share/weewx/weewxd --daemon --log-label 
> weewx-eco --pidfile=/var/run/weewx-eco.pid /etc/weewx/eco.conf
>
> After :
> sudo wee_config --upgrade --config=/etc/weewx/dav.conf 
> --dist-config=/etc/weewx/weewx.conf.dist
> and
> sudo wee_config --upgrade --config=/etc/weewx/eco.conf 
> --dist-config=/etc/weewx/weewx.conf.dist
>
> there was no error .
>
> gjr80 schrieb am Donnerstag, 3. März 2022 um 14:56:47 UTC+1:
>
>> I have a dual instance setup running and it's basically as Tom said, you 
>> just upgrade WeeWX as normal. A WeeWX upgrade only upgrades weewx.conf 
>> so once the upgrade is done I run the following command on each instance 
>> config file (neither of my config files is named weewx.conf - if you do 
>> use weewx.conf for one instance then of course it is upgraded as part of 
>> the WeeWX upgrade so no need to 'upgrade' it again) to upgrade the instance 
>> config files:
>>
>> $ cd /home/weewx
>> $ ./bin/wee_config instance.conf --dist-config=weewx.conf.X.Y.Z --upgrade
>>
>> I run a setup.py install so for a package install the paths will be 
>> different. sudo may also be required depending on your setup.
>>
>> Gary 
>> On Thursday, 3 March 2022 at 23:14:26 UTC+10 tke...@gmail.com wrote:
>>
>>> Not sure what you're asking. If all instances are using the same code 
>>> base, just update the code base. 
>>>
>>> On Thu, Mar 3, 2022 at 4:59 AM Joachim Puttkammer  
>>> wrote:
>>>
 How should I proceed with the update for weewx-multi (2 instances)?
  

 -- 
 You received this message because you are subscribed to the Google 
 Groups "weewx-user" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to weewx-user+...@googlegroups.com.
 To view this discussion on the web visit 
 https://groups.google.com/d/msgid/weewx-user/0c64229c-974c-4d8a-acb6-d53b27d2c352n%40googlegroups.com
  
 
 .

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/da708adb-5d87-40c5-be3f-92b750bdaca7n%40googlegroups.com.