Re: [WISPA] UPS With SNMP Support
We have been using the Tripplite 1500XL model for about 6-8 months now and have been happy with them. UPS reports the battery voltage is 54v. The double conversion does draw more power during normal operation but also allows it to continue to power loads even when AC input power is as low as about 60v AC or so without actually switching to battery draw. Only issue has been portable generator power they do not like. Our old APC models we could change the sensitivity to make them work. I have not found an option in the tripplite's. Leroy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Matt Sent: Saturday, September 17, 2011 9:22 PM To: WISPA General List Subject: Re: [WISPA] UPS With SNMP Support > I know this is going to be different from most people, but we use Tripplite. > The dual conversion models (I think the clean power helps with lockups). > The run time sucks on the base unit, but I found the connector they use for > add on battery packs. The 1000va unit is a 24 volt based system, and it > doesn't appear to damage deep cycle batteries, so just hook us as many pairs > as you need. Plastic boxes with #6 jumper cables works very well for 4 > batteries mounted upright, or the same box can hold 6 batteries laying on > the ground. Then we add a packetflux to monitor battery voltage and AC > voltage via some left over transformer. Use a chart on your monitoring > software to give you percentage of battery and alerting on the AC side. > > We do not do a LVD. 2 deep cycles gives us 24 hours at most sites, so we > just send someone out after 20 hours if the power is going to be out longer. Was looking at this model: http://www.tripplite.com/en/products/model.cfm?txtModelID=4387 Offers SNMP and email alerts. Noticed the connector on the back. Wander if we can build our own external packs as well? Does this look like the same connector as your units? What did you use for batteries? I am guessing 72 volt? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UPS With SNMP Support
> I know this is going to be different from most people, but we use Tripplite. > The dual conversion models (I think the clean power helps with lockups). > The run time sucks on the base unit, but I found the connector they use for > add on battery packs. The 1000va unit is a 24 volt based system, and it > doesn't appear to damage deep cycle batteries, so just hook us as many pairs > as you need. Plastic boxes with #6 jumper cables works very well for 4 > batteries mounted upright, or the same box can hold 6 batteries laying on > the ground. Then we add a packetflux to monitor battery voltage and AC > voltage via some left over transformer. Use a chart on your monitoring > software to give you percentage of battery and alerting on the AC side. > > We do not do a LVD. 2 deep cycles gives us 24 hours at most sites, so we > just send someone out after 20 hours if the power is going to be out longer. Was looking at this model: http://www.tripplite.com/en/products/model.cfm?txtModelID=4387 Offers SNMP and email alerts. Noticed the connector on the back. Wander if we can build our own external packs as well? Does this look like the same connector as your units? What did you use for batteries? I am guessing 72 volt? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UPS With SNMP Support
I know this is going to be different from most people, but we use Tripplite. The dual conversion models (I think the clean power helps with lockups). The run time sucks on the base unit, but I found the connector they use for add on battery packs. The 1000va unit is a 24 volt based system, and it doesn't appear to damage deep cycle batteries, so just hook us as many pairs as you need. Plastic boxes with #6 jumper cables works very well for 4 batteries mounted upright, or the same box can hold 6 batteries laying on the ground. Then we add a packetflux to monitor battery voltage and AC voltage via some left over transformer. Use a chart on your monitoring software to give you percentage of battery and alerting on the AC side. We do not do a LVD. 2 deep cycles gives us 24 hours at most sites, so we just send someone out after 20 hours if the power is going to be out longer. Scott Piehn JCWIFI.com Division Manager Computer Dynamics 451 W. South St Freeport, IL 61032 spi...@computerdyn.com V 815.233.2641 F 815.233.6225 - Original Message - From: "Matt" To: "WUG" ; "WISPA General List" Sent: Saturday, September 17, 2011 10:33 AM Subject: [WISPA] UPS With SNMP Support >I am looking for a UPS I can monitor battery status and AC status with > SNMP. Decent sized would be nice as well. Anybody know of anything? > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WUG] UPS With SNMP Support
APC 9616/7/9 management cards and SU1500, 2200 most definitely do. What kind of wattage/runtime are you looking for? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sat, Sep 17, 2011 at 11:33 AM, Matt wrote: > I am looking for a UPS I can monitor battery status and AC status with > SNMP. Decent sized would be nice as well. Anybody know of anything? > --- > Wireless Users Group us...@wug.cc > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] UPS With SNMP Support
I am looking for a UPS I can monitor battery status and AC status with SNMP. Decent sized would be nice as well. Anybody know of anything? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Weekend Politics that Make Sense
Should members of Congress cut their salaries or raise the age at which they can draw a congressional pension when many Americans are making personal sacrifices during the country's prolonged economic crisis? A congressman makes $174,000 a year. However, that may not be enough for one freshman who said he's finding it hard to get by on his salary. Call/email your representative and make it know that this idea is worthy of passing. http://www.cnn.com/2011/POLITICS/09/16/congress.salary/index.html?hpt=hp_c1 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/