> I know this is going to be different from most people, but we use Tripplite.
> The dual conversion models (I think the clean power helps with lockups).
> The run time sucks on the base unit, but I found the connector they use for
> add on battery packs.  The 1000va unit is a 24 volt based system, and it
> doesn't appear to damage deep cycle batteries, so just hook us as many pairs
> as you need.  Plastic boxes with #6 jumper cables works very well for 4
> batteries mounted upright, or the same box can hold 6 batteries laying on
> the ground.  Then we add a packetflux to monitor battery voltage and AC
> voltage via some left over transformer.  Use a chart on your monitoring
> software to give you percentage of battery and alerting on the AC side.
>
> We do not do a LVD.  2 deep cycles gives us 24 hours at most sites, so we
> just send someone out after 20 hours if the power is going to be out longer.

Was looking at this model:

http://www.tripplite.com/en/products/model.cfm?txtModelID=4387

Offers SNMP and email alerts.  Noticed the connector on the back.
Wander if we can build our own external packs as well?  Does this look
like the same connector as your units?  What did you use for
batteries?  I am guessing 72 volt?


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to