Re: [WISPA] IP based Remote Reboot
It's not ip based (which is good when your system is down :-). This is pager based. When we get some extra funds this is the kind of gear we'll put in. http://www.nighthawksystems.com/ laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: Tom DeReggi [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tuesday, November 08, 2005 8:24 AM Subject: Re: [WISPA] IP based Remote Reboot These are great units, its what we use also at our cell sites. You can get them for $250 for 8 port, in qty 5. These are well worth it for cell sites. What I'd like to see though is a sub-$100 unit for 1 or 2 port reboot device for client CPE side. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Chuck Profito [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Monday, November 07, 2005 11:06 PM Subject: Re: [WISPA] IP based Remote Reboot Try this, all our towers have this installed, it even pings for an auto reboot, $300 is cheep ! http://www.corpsys.com/store/prodinfo.asp?number=EPCRvariation=aitem=3mitem=20 Chuck Profito CV-ACCESS - Original Message - From: Tom DeReggi [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Monday, November 07, 2005 7:24 PM Subject: Re: [WISPA] IP based Remote Reboot Thanks thats good to know. Since we don't run DHCP anywhere. Based on that, probably only good as a home unit, thats behind a home gateway w/ DHCP. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Rick Harnish [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 7:59 PM Subject: RE: [WISPA] IP based Remote Reboot We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org
Re: [WISPA] IP based Remote Reboot
A bit pricey for $695. Internal power supply, 48V, 1A. 4 Watts max. Unclear on load capabilty. 48Vx1amp=48W. Not to useful, when it integrates power and ethernet, if it doesn't support passing VLAN/large packets. The added AC reboot recepticle was a good idea. Without it, it prevents the Reboot device to be used to reboot a PC based router. What good is it to save on reboot device cost, if two are needed, one for DC one for AC? So it solves that problem. However, for a unit to support end user CPEs, bothAC and DC support really not needed. ONe or the other will work. The only requirement is for it to cost under a $100! It would be nice if the reboot device supported two devices. That would then allow rebooting both home gateway and CPE radio. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Wednesday, November 09, 2005 8:06 PM Subject: RE: [WISPA] IP based Remote Reboot Blair I think this will do what you need tell them Tony front Demarc sent you: http://www.remotedatacom.com/pages/KABU.html Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 207-244-9068 Fax: 207-433-1008 http://www.demarctech.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Tuesday, November 08, 2005 11:22 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.361 / Virus Database: 267.12.8/163 - Release Date: 11/8/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] IP based Remote Reboot
Marlon and all, I just wanted to pass on the below E-mail that we received regarding the Nighthawk NH100, and special limited time pricing. This may be a good time for you to spend less on Margaritas and a little on the remote reboot;0 I don't often get to add much value to this list, but hopefully I can this time. Best Regards, Joel Sent: Mon, 7 Nov 2005 10:08:46 EST Subject: NIGHTHAWK PILOT PROGRAM OFFER Nighthawk Systems, Inc is offering a pilot program with the CEO 700 and CEO 700H's. Customers will receive a minimum of 10 units to use for a pilot program not to exceed 45 days. After 30 - 45 days the customer(s) can decide to purchase the units or send them back to Nighthawk Systems, Inc. In most cases we can ship units within 7 days. We are also offering the NH100's at $185/unit for those customers that take delivery prior to December 31st. Our normal price on the NH100's is $225 - $325. NH100's are great applications for rebooting servers and routers in any data or telecom room along with rebooting SCADA systems. The EA1 which is used for alerting Volunteer Fire Houses and Fire Fighters is also being discounted. Check out all of our products @: www.nighthawksystems.com. Best regards, Jeff Bell Vice President Nighthawk Systems, Inc. 8200 East Pacific Place Ste 204 Denver, CO 80231 720-470-4090 Message: 1 Date: Thu, 10 Nov 2005 09:36:45 -0800 From: Marlon K. Schafer (509) 982-2181 [EMAIL PROTECTED] Subject: Re: [WISPA] IP based Remote Reboot To: WISPA General List wireless@wispa.org Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response It's not ip based (which is good when your system is down :-). This is pager based. When we get some extra funds this is the kind of gear we'll put in. http://www.nighthawksystems.com/ laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- NexGenAccess Inc. http://www.nexgenaccess.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
The nighthawk units are NICE units, and can easily be justified cost wise for MTU unattended sites, but their are still two deficiencies. 1) They are MANUAL reboot devices. I can't automate the process to detect failure and auto-reboot easilly. Well actually I could partially, if I tried hard enough, but an auto-ping, that actually tests THROUGH the CPE operating on the CPE side is a better method. The purpose is not only to prevent truck rolls, but optimally to reduce phone tech support resources as well, not to mention repair time. Auto-ping can get the detection/repair time down to 1 minute, often hiding from the customer that a down time insodent ever occurred in the first place. 2) Nighthawks need to be pre-programed for the user's area (I think zip code, but much narrower than area code) before it ships, and it can not be changed after the fact. My network covers MANY zip codes in the three states I serve. That means stocking an awful lot of reboot devices that you may never need, or ordering them individually which could mean a seperate trip might be needed to install the reboot device, in order to not delay scheduled installtions. If I could stock 10 or so, and change the usage area of the device myself on the fly, well it would strongly increase its value as a product. $185, is justifyable for Unattended MTU building closets that serve multiple clients, or really far away sites, but its still a little high for wide scale usage for every CPE location. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Joel White [EMAIL PROTECTED] To: wireless@wispa.org Sent: Thursday, November 10, 2005 1:49 PM Subject: [WISPA] IP based Remote Reboot Marlon and all, I just wanted to pass on the below E-mail that we received regarding the Nighthawk NH100, and special limited time pricing. This may be a good time for you to spend less on Margaritas and a little on the remote reboot;0 I don't often get to add much value to this list, but hopefully I can this time. Best Regards, Joel Sent: Mon, 7 Nov 2005 10:08:46 EST Subject: NIGHTHAWK PILOT PROGRAM OFFER Nighthawk Systems, Inc is offering a pilot program with the CEO 700 and CEO 700H's. Customers will receive a minimum of 10 units to use for a pilot program not to exceed 45 days. After 30 - 45 days the customer(s) can decide to purchase the units or send them back to Nighthawk Systems, Inc. In most cases we can ship units within 7 days. We are also offering the NH100's at $185/unit for those customers that take delivery prior to December 31st. Our normal price on the NH100's is $225 - $325. NH100's are great applications for rebooting servers and routers in any data or telecom room along with rebooting SCADA systems. The EA1 which is used for alerting Volunteer Fire Houses and Fire Fighters is also being discounted. Check out all of our products @: www.nighthawksystems.com. Best regards, Jeff Bell Vice President Nighthawk Systems, Inc. 8200 East Pacific Place Ste 204 Denver, CO 80231 720-470-4090 Message: 1 Date: Thu, 10 Nov 2005 09:36:45 -0800 From: Marlon K. Schafer (509) 982-2181 [EMAIL PROTECTED] Subject: Re: [WISPA] IP based Remote Reboot To: WISPA General List wireless@wispa.org Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response It's not ip based (which is good when your system is down :-). This is pager based. When we get some extra funds this is the kind of gear we'll put in. http://www.nighthawksystems.com/ laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- NexGenAccess Inc. http://www.nexgenaccess.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.12.8/165 - Release Date: 11/9/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Sounds good. Let me know when you get em made! I like the idea of DC reboot devices over AC reboot devices anyway. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: John Thomas [EMAIL PROTECTED] To: [EMAIL PROTECTED]; WISPA General List wireless@wispa.org Sent: Wednesday, November 09, 2005 11:14 AM Subject: Re: [WISPA] IP based Remote Reboot Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.361 / Virus Database: 267.12.8/163 - Release Date: 11/8/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Very nice. $695?!?! I might be able to justify it in a few locations, but not for wide deployment. We are looking for something we can deploy widely Sub $100 price. Sub $70 if I can manage it -- Blair Davis West Michigan Wireless ISP 269-686-8648 [EMAIL PROTECTED] wrote: Blair I think this will do what you need tell them Tony front Demarc sent you: http://www.remotedatacom.com/pages/KABU.html Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 207-244-9068 Fax: 207-433-1008 http://www.demarctech.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Tuesday, November 08, 2005 11:22 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Yes, Blair That does sound good, let us all know. I second the vote for DC reboot devices. Original message Date: Wed, 9 Nov 2005 14:49:43 -0500 From: Tom DeReggi [EMAIL PROTECTED] Subject: Re: [WISPA] IP based Remote Reboot To: WISPA General List wireless@wispa.org Sounds good. Let me know when you get em made! I like the idea of DC reboot devices over AC reboot devices anyway. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: John Thomas [EMAIL PROTECTED] To: [EMAIL PROTECTED]; WISPA General List wireless@wispa.org Sent: Wednesday, November 09, 2005 11:14 AM Subject: Re: [WISPA] IP based Remote Reboot Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.361 / Virus Database: 267.12.8/163 - Release Date: 11/8/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Ron Wallace Hahnron, Inc. 220 S. Jackson St. Addison, MI 49220 Phone: (517) 547-8410 Mobile: (517) 605-4542 e-mail: [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
let me know where you get them for $25 John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
OK, I exaggerated, compuplus has them for $36 each. My point was that he only needs half the circuit. Now that I think of it, I guess that as long as his device takes 5-12 volts in, you would only need a power reducer to use 48 volts up. It's a lot easir to get 48 volts to go 300 feet than it is to get 5-12 volts 300 feet. John A. Huppenthal wrote: let me know where you get them for $25 John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
That's a good price. I paid nearly $50 each. John Thomas wrote: Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12 volts out the back. John A. Huppenthal wrote: let me know where you get them for $25 John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC step down unit at the other end. $25 doesn't sound too bad until you see the current hardware budget. :( -- John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
We get them from DH for less than $30 but I don't remember the exact price off hand. -- A. Huppenthal wrote: That's a good price. I paid nearly $50 each. John Thomas wrote: Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12 volts out the back. John A. Huppenthal wrote: let me know where you get them for $25 John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Right, my point here is that you don't need to do anything to make your system work with 48 volts. We just need to acquire a 48-12 volt convertor. John Blair Davis wrote: Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC step down unit at the other end. $25 doesn't sound too bad until you see the current hardware budget. :( -- John Thomas wrote: DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it back down to 5 volts at the other end. They list for about $25, so I wouldn't think it should cost you too much to do. John Blair Davis wrote: John, I have considered it. My only concern was that it might increase the final cost. I will take another look at it. Maybe where it can 'vampire' it's power off one of the switched circuits if the switched circuit is 48V POE? The only bad thing about that is it will still require a 10/100 network switch or such to connect it's communication port. John Thomas wrote: Blair, it might be a good idea to allow for 48 v powering, since that is 802.3af POE standard. This way your device could be mounted away from the Radio if one so chose to. John Blair Davis wrote: Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Nice! But, $299?!? Just a little higher price that we want when we plan to install quite a few of them. -- Blair Davis West Michigan Wireless ISP 269-686-8648 G.Villarini wrote: I got you one!, get an ip based webcam like this one: http://www.dlink.com/products/?sec=0pid=17 thay have a dry contact switch controllable trough the web page Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Wednesday, November 09, 2005 12:22 AM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Well, I guess there is no reasonably priced unit out there that will do what I need and fit in the space allowed. The comments on the list have shown me that there may be a demand for a unit like this. I have decided to build my own. I have also decided to make it available to others who might need it. As part of this process, I am posting the planned specs and I am asking for additional ideas for features. Specs: Hardware 10baseT ethernet port for communication. 1-4 pair of RJ-45 pass thru jacks with lines 4 and 5 switched. Each pass thru jack pair is independently switched Relay(s) rated for up to 48VDC at 3A Power available monitor for switched jack(s) Unit powered via 5-12VDC Software Setup and controlled via web browser or telnet Static IP with subnet and gateway Programmable ping monitor for each relay Selectable 'keep alive' / 'I am here' ping Adjustable power off delay Adjustable power off time Several things I am undecided about adding are: Email notification of ping failure Email notification of power available status change Programmable, repeatable by time and date switching (this requires a real time clock and/or automatic synchronization with a time server and might increase the costs) One thing I will not add: Switching 110/220AC. This would add many requirements for testing and considerable legal liability. The price should be under $100 each. Questions? Comments? Interest? -- Blair Davis West Michigan Wireless ISP 269-686-8648 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] IP based Remote Reboot
Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] IP based Remote Reboot
Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] IP based Remote Reboot
Not the cheapest, but they're really nice: http://www.wti.com I've used and installed them for many years. Thank you Frank Keeney Pasadena Networks, LLC Antennas, Cables and Equipment: http://www.wlanparts.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 8:25 AM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] IP based Remote Reboot
We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Thanks thats good to know. Since we don't run DHCP anywhere. Based on that, probably only good as a home unit, thats behind a home gateway w/ DHCP. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Rick Harnish [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 7:59 PM Subject: RE: [WISPA] IP based Remote Reboot We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
A lot of things here that I have seen, some I have not. Some I use already. Thanks for the ideas. However, the main issue is space.. The box that all my gear must fit in at this location is 12x12x6. In that space, I already have a WRAP 2C, an OR-500 and a 5 port switch And while I can live with switching AC, I'd much prefer a simple set of relay contacts. If I have to build my own, I will. But I was hoping someone had already done it... -- Blair Davis West Michigan Wireless ISP Rick Harnish wrote: We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] IP based Remote Reboot
Rick, I just looked at the pdf manual http://sturgeon.apcc.com/techref.nsf/partnum/990-9234/$FILE/990-9234_EN.pdf #9 shows you how to set a static ip if no DHCP server is available. Thought you might want to know. John Buwa We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
It will let you set an IP address. You can't set a gateway or subnet mask -- Blair Davis West Michigan Wireless ISP JNA wrote: Rick, I just looked at the pdf manual http://sturgeon.apcc.com/techref.nsf/partnum/990-9234/$FILE/990-9234_EN.pdf #9 shows you how to set a static ip if no DHCP server is available. Thought you might want to know. John Buwa We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] IP based Remote Reboot
Try this, all our towers have this installed, it even pings for an auto reboot, $300 is cheep ! http://www.corpsys.com/store/prodinfo.asp?number=EPCRvariation=aitem=3mitem=20 Chuck Profito CV-ACCESS - Original Message - From: Tom DeReggi [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Monday, November 07, 2005 7:24 PM Subject: Re: [WISPA] IP based Remote Reboot Thanks thats good to know. Since we don't run DHCP anywhere. Based on that, probably only good as a home unit, thats behind a home gateway w/ DHCP. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Rick Harnish [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 7:59 PM Subject: RE: [WISPA] IP based Remote Reboot We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] IP based Remote Reboot
Ah got it. Ok that's stupid, lol. John Buwa -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 11:00 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot It will let you set an IP address. You can't set a gateway or subnet mask -- Blair Davis West Michigan Wireless ISP JNA wrote: Rick, I just looked at the pdf manual http://sturgeon.apcc.com/techref.nsf/partnum/990-9234/$FILE/990- 9234_EN.pdf #9 shows you how to set a static ip if no DHCP server is available. Thought you might want to know. John Buwa We have a couple of them in our office waiting to be deployed at tower sites. The web interface is crap, it won't allow you to put in a subnet and default gateway. You have to set it to get a DHCP address to get those key routing numbers inserted. I like the size and the price is right, I guess for $80 you shouldn't expect many management features. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G.Villarini Sent: Monday, November 07, 2005 4:04 PM To: 'WISPA General List' Subject: RE: [WISPA] IP based Remote Reboot http://www.apcc.com/products/family/index.cfm?id=3 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 07, 2005 5:02 PM To: WISPA General List Subject: Re: [WISPA] IP based Remote Reboot Which model APC has Ethernet reboot for $80? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: G.Villarini [EMAIL PROTECTED] To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent: Monday, November 07, 2005 11:37 AM Subject: RE: [WISPA] IP based Remote Reboot Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port for remote reboot ... $80 Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 07, 2005 12:25 PM To: WISPA General List Subject: [WISPA] IP based Remote Reboot Hi all. I'm looking for an IP based remote reboot or relay controller. It must be small, controlled via http or telnet, and be able to turn a relay off or on remotely Oh, before I forget, cheap, too! Any ideas? -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/