Re: [WISPA] MikroTik Hardware
how much are the Axiom boxes ? Noone here listed any pricing for them ? JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 2:46 PM Subject: RE: [WISPA] MikroTik Hardware There is none ... I searched hi and low, but at the end the axiomtek boxes were easier, about the same cost and pro looking... Also the support hardware failure bypass on the Ethernet ports Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 3:26 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Micro-ATX form factor - I am sure there is a 1U case you could build it into if you wanted - rear ethernet ports ... JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 2:15 PM Subject: RE: [WISPA] MikroTik Hardware 1u with front ethernet ports ? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 11:13 AM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Gino - I just built 2 boxes with the following specs. 7 Ethernet ports 512mb ram 2ghz processor 40gb hd Micro-ATX form factor I spent a total of 250.00/each including shipping - gotta love newegg JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 9:56 AM Subject: RE: [WISPA] MikroTik Hardware Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: > Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik > OS on. I need the device to be able to handle around 200 MB of > actual throughput. We use quite a few of the RB532s today and seem > to cap out around 40MB or so. > > We have tried a few of the PC based platforms using Intel 915 boards > and the > gig RB PCI cards. When testing with these, we do get minor packet > loss that > we do not get on the 532s or our Cisco routers. > > Any suggestions? Thanks. > > > > > > > > _ > > Don Annas > > 336.510.3800 x111 > > 336.510.3801 fax > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > _ > > > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > 5/26/2007 > 10:47 AM > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman
RE: [WISPA] MikroTik Hardware
There is none ... I searched hi and low, but at the end the axiomtek boxes were easier, about the same cost and pro looking... Also the support hardware failure bypass on the Ethernet ports Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 3:26 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Micro-ATX form factor - I am sure there is a 1U case you could build it into if you wanted - rear ethernet ports ... JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 2:15 PM Subject: RE: [WISPA] MikroTik Hardware 1u with front ethernet ports ? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 11:13 AM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Gino - I just built 2 boxes with the following specs. 7 Ethernet ports 512mb ram 2ghz processor 40gb hd Micro-ATX form factor I spent a total of 250.00/each including shipping - gotta love newegg JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 9:56 AM Subject: RE: [WISPA] MikroTik Hardware Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: > > Use a systemboard that has built-in GigE ports. The RB PCI card may be > your problem, as I have two very stable PC platform boxes with dual > GigE ports that will push over 600Mbps without a problem. > > Travis > Microserv > > Don Annas wrote: > > Guys, I'm looking for a solid state, rack mountable hardware to run > MikroTik > > OS on. I need the device to be able to handle around 200 MB of > > actual throughput. We use quite a few of the RB532s today and seem > > to cap out around 40MB or so. > > > > We have tried a few of the PC based platforms using Intel 915 boards > > and > the > > gig RB PCI cards. When testing with these, we do get minor packet > > loss > that > > we do not get on the 532s or our Cisco routers. > > > > Any suggestions? Thanks. > > > > > > > > > > > > > > > > _ > > > > Don Annas > > > > 336.510.3800 x111 > > > > 336.510.3801 fax > > > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > > > _ > > > > > > > > > > > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > > 5/26/2007 > > 10:47 AM > > > > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: ht
Re: [WISPA] MikroTik Hardware
Micro-ATX form factor - I am sure there is a 1U case you could build it into if you wanted - rear ethernet ports ... JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 2:15 PM Subject: RE: [WISPA] MikroTik Hardware 1u with front ethernet ports ? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 11:13 AM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Gino - I just built 2 boxes with the following specs. 7 Ethernet ports 512mb ram 2ghz processor 40gb hd Micro-ATX form factor I spent a total of 250.00/each including shipping - gotta love newegg JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 9:56 AM Subject: RE: [WISPA] MikroTik Hardware Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: > Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik > OS on. I need the device to be able to handle around 200 MB of > actual throughput. We use quite a few of the RB532s today and seem > to cap out around 40MB or so. > > We have tried a few of the PC based platforms using Intel 915 boards > and the > gig RB PCI cards. When testing with these, we do get minor packet > loss that > we do not get on the 532s or our Cisco routers. > > Any suggestions? Thanks. > > > > > > > > _ > > Don Annas > > 336.510.3800 x111 > > 336.510.3801 fax > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > _ > > > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > 5/26/2007 > 10:47 AM > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
1u with front ethernet ports ? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JohnnyO Sent: Monday, May 28, 2007 11:13 AM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Gino - I just built 2 boxes with the following specs. 7 Ethernet ports 512mb ram 2ghz processor 40gb hd Micro-ATX form factor I spent a total of 250.00/each including shipping - gotta love newegg JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 9:56 AM Subject: RE: [WISPA] MikroTik Hardware Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: > > Use a systemboard that has built-in GigE ports. The RB PCI card may be > your problem, as I have two very stable PC platform boxes with dual > GigE ports that will push over 600Mbps without a problem. > > Travis > Microserv > > Don Annas wrote: > > Guys, I'm looking for a solid state, rack mountable hardware to run > MikroTik > > OS on. I need the device to be able to handle around 200 MB of > > actual throughput. We use quite a few of the RB532s today and seem > > to cap out around 40MB or so. > > > > We have tried a few of the PC based platforms using Intel 915 boards > > and > the > > gig RB PCI cards. When testing with these, we do get minor packet > > loss > that > > we do not get on the 532s or our Cisco routers. > > > > Any suggestions? Thanks. > > > > > > > > > > > > > > > > _ > > > > Don Annas > > > > 336.510.3800 x111 > > > > 336.510.3801 fax > > > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > > > _ > > > > > > > > > > > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > > 5/26/2007 > > 10:47 AM > > > > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] MikroTik Hardware
Gino - I just built 2 boxes with the following specs. 7 Ethernet ports 512mb ram 2ghz processor 40gb hd Micro-ATX form factor I spent a total of 250.00/each including shipping - gotta love newegg JohnnyO - Original Message - From: "Gino Villarini" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Monday, May 28, 2007 9:56 AM Subject: RE: [WISPA] MikroTik Hardware Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: > Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik > OS on. I need the device to be able to handle around 200 MB of > actual throughput. We use quite a few of the RB532s today and seem > to cap out around 40MB or so. > > We have tried a few of the PC based platforms using Intel 915 boards > and the > gig RB PCI cards. When testing with these, we do get minor packet > loss that > we do not get on the 532s or our Cisco routers. > > Any suggestions? Thanks. > > > > > > > > _ > > Don Annas > > 336.510.3800 x111 > > 336.510.3801 fax > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > _ > > > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > 5/26/2007 > 10:47 AM > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
Check this unit out: http://www.axiomtek.com/products/ViewProduct.asp?view=436 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 11:24 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: > > Use a systemboard that has built-in GigE ports. The RB PCI card may be > your problem, as I have two very stable PC platform boxes with dual > GigE ports that will push over 600Mbps without a problem. > > Travis > Microserv > > Don Annas wrote: > > Guys, I'm looking for a solid state, rack mountable hardware to run > MikroTik > > OS on. I need the device to be able to handle around 200 MB of > > actual throughput. We use quite a few of the RB532s today and seem > > to cap out around 40MB or so. > > > > We have tried a few of the PC based platforms using Intel 915 boards > > and > the > > gig RB PCI cards. When testing with these, we do get minor packet > > loss > that > > we do not get on the 532s or our Cisco routers. > > > > Any suggestions? Thanks. > > > > > > > > > > > > > > > > _ > > > > Don Annas > > > > 336.510.3800 x111 > > > > 336.510.3801 fax > > > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > > > _ > > > > > > > > > > > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > > 5/26/2007 > > 10:47 AM > > > > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
I can't wait to get my hands on an RB333 - John Tully tells me it'll handle two high power cards at full bore without blinking. Finally, an SR9/SR2 repeater. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Hammett Sent: Monday, May 28, 2007 12:53 AM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware http://www.czfree-ol.net/forum/viewtopic.php?p=2745 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Don Annas" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "'WISPA General List'" Sent: Sunday, May 27, 2007 10:23 PM Subject: RE: [WISPA] MikroTik Hardware > Is there an ETA for any of these products or any information on what they > will be releasing? > > - Don > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Dennis Burgess > Sent: Sunday, May 27, 2007 8:20 PM > To: WISPA General List > Subject: Re: [WISPA] MikroTik Hardware > > Don't forget also, that MT is coming out with several new routerboard, > including one specifclly designed with giving speeds in the gigabit range. > > > > On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: >> >> Use a systemboard that has built-in GigE ports. The RB PCI card may be >> your problem, as I have two very stable PC platform boxes with dual >> GigE ports that will push over 600Mbps without a problem. >> >> Travis >> Microserv >> >> Don Annas wrote: >> > Guys, I'm looking for a solid state, rack mountable hardware to run >> MikroTik >> > OS on. I need the device to be able to handle around 200 MB of >> > actual throughput. We use quite a few of the RB532s today and seem >> > to cap out around 40MB or so. >> > >> > We have tried a few of the PC based platforms using Intel 915 boards >> > and >> the >> > gig RB PCI cards. When testing with these, we do get minor packet >> > loss >> that >> > we do not get on the 532s or our Cisco routers. >> > >> > Any suggestions? Thanks. >> > >> > >> > >> > >> > >> > >> > >> > _ >> > >> > Don Annas >> > >> > 336.510.3800 x111 >> > >> > 336.510.3801 fax >> > >> > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] >> > >> > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com >> > >> > _ >> > >> > >> > >> > >> > >> > No virus found in this outgoing message. >> > Checked by AVG Free Edition. >> > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: >> > 5/26/2007 >> > 10:47 AM >> > >> > >> > >> > >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > -- > Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant > www.mikrotikconsulting.com [EMAIL PROTECTED] > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 > 10:47 AM > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 > 10:47 AM > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] MikroTik Hardware
http://www.czfree-ol.net/forum/viewtopic.php?p=2745 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Don Annas" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "'WISPA General List'" Sent: Sunday, May 27, 2007 10:23 PM Subject: RE: [WISPA] MikroTik Hardware Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: > Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik > OS on. I need the device to be able to handle around 200 MB of > actual throughput. We use quite a few of the RB532s today and seem > to cap out around 40MB or so. > > We have tried a few of the PC based platforms using Intel 915 boards > and the > gig RB PCI cards. When testing with these, we do get minor packet > loss that > we do not get on the 532s or our Cisco routers. > > Any suggestions? Thanks. > > > > > > > > _ > > Don Annas > > 336.510.3800 x111 > > 336.510.3801 fax > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > _ > > > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > 5/26/2007 > 10:47 AM > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
On Sun, 27 May 2007, Don Annas wrote: Is there an ETA for any of these products or any information on what they will be releasing? My understanding is they plan to officially release several new routerboards at the MUM in Orlando next week. I'll try to post some information to my website when I get the details. -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ My calendar: http://tinyurl.com/y24ad6 Training Partners: http://tinyurl.com/smfkf Mikrotik Certified Consultant http://www.mikrotik.com/consultants.html -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
Is there an ETA for any of these products or any information on what they will be releasing? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Sunday, May 27, 2007 8:20 PM To: WISPA General List Subject: Re: [WISPA] MikroTik Hardware Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: > > Use a systemboard that has built-in GigE ports. The RB PCI card may be > your problem, as I have two very stable PC platform boxes with dual > GigE ports that will push over 600Mbps without a problem. > > Travis > Microserv > > Don Annas wrote: > > Guys, I'm looking for a solid state, rack mountable hardware to run > MikroTik > > OS on. I need the device to be able to handle around 200 MB of > > actual throughput. We use quite a few of the RB532s today and seem > > to cap out around 40MB or so. > > > > We have tried a few of the PC based platforms using Intel 915 boards > > and > the > > gig RB PCI cards. When testing with these, we do get minor packet > > loss > that > > we do not get on the 532s or our Cisco routers. > > > > Any suggestions? Thanks. > > > > > > > > > > > > > > > > _ > > > > Don Annas > > > > 336.510.3800 x111 > > > > 336.510.3801 fax > > > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > > > _ > > > > > > > > > > > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: > > 5/26/2007 > > 10:47 AM > > > > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] MikroTik Hardware
Don't forget also, that MT is coming out with several new routerboard, including one specifclly designed with giving speeds in the gigabit range. On 5/27/07, Travis Johnson <[EMAIL PROTECTED]> wrote: Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: > Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik > OS on. I need the device to be able to handle around 200 MB of actual > throughput. We use quite a few of the RB532s today and seem to cap out > around 40MB or so. > > We have tried a few of the PC based platforms using Intel 915 boards and the > gig RB PCI cards. When testing with these, we do get minor packet loss that > we do not get on the 532s or our Cisco routers. > > Any suggestions? Thanks. > > > > > > > > _ > > Don Annas > > 336.510.3800 x111 > > 336.510.3801 fax > > HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] > > HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com > > _ > > > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 > 10:47 AM > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified Consultant www.mikrotikconsulting.com [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] MikroTik Hardware
Use a systemboard that has built-in GigE ports. The RB PCI card may be your problem, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik OS on. I need the device to be able to handle around 200 MB of actual throughput. We use quite a few of the RB532s today and seem to cap out around 40MB or so. We have tried a few of the PC based platforms using Intel 915 boards and the gig RB PCI cards. When testing with these, we do get minor packet loss that we do not get on the 532s or our Cisco routers. Any suggestions? Thanks. _ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com _ No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] MikroTik Hardware
The issue you are seeing with minor packet loss may be due to the RB44G cards. I know they initially had issues, but I haven't personally had the time to test the RB44G again since my post on the MT forum back in March. http://forum.mikrotik.com/viewtopic.php?f=2&t=14316&hilit= If you need GigE Interfaces for your Intel based MT router I would suggest sticking with Intel NICs. We have many, many Intel MF and Intel MT NICs in production with great success. Sure beats the Hell out of paying $1000 - $1500+ per GigE fiber NIC from Imagestream! We use an Evercase 4U chassis and for the past several months are including redundant hot-swap power supplies for an additional $200-$300. BTW, what Intel motherboard are you using? Unfortunately not all motherboards are created equal when it comes to building a MT router! Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Sunday, May 27, 2007 7:38 AM To: wireless@wispa.org Subject: [WISPA] MikroTik Hardware Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik OS on. I need the device to be able to handle around 200 MB of actual throughput. We use quite a few of the RB532s today and seem to cap out around 40MB or so. We have tried a few of the PC based platforms using Intel 915 boards and the gig RB PCI cards. When testing with these, we do get minor packet loss that we do not get on the 532s or our Cisco routers. Any suggestions? Thanks. _ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com _ No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007 10:47 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/