Re: [Wireshark-users] Diameter unknown AVPs
Hi, Changing the chargecontrol.xml file to: Works for me. Quota-Holding-Time is defined in the dictionary.xml file and in the chargecontrol.xml(as vendor specific)perhaps Volume-Quota-Threshold Should be in both files as well. I think there is a bit of a mess with the older 3GPP specs misusing The common AVP's which has been corrected in later specs. Best regards Anders Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Frederiek Debruyne Skickat: den 26 februari 2007 14:52 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The cleared flag bits seem not to be the real problem that causes Wireshark not to recognize this Volume-Quota-Threshold AVP. I removed the vendor-id="TGPP" part from the related XML file line, and set vendor-bit="mustnot". That did not help. Furthermore, the 3GPP AVP Quota-Holding-Time, on the other hand, is recognized without any problem, while all its flag bits are cleared too. Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: maandag 26 februari 2007 13:27 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi, The problem is that Wireshark expects this to be a vendor AVP but it's sent as a "normal" one. I think this was changed in more recent versions of the 3GPP doc's to be Vendor specific AVP:s. The simplest soulution for you is to edit the XML file and remove "Vendor-id="TGPP" " from the relevant AVP:s Best regards Anders From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederiek Debruyne Sent: den 26 februari 2007 09:10 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi Anders, Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case? Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:42 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, That should suffice, can you send me a small sample file? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The Attempt to load/use Diameter XML Dictionary checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to C:\Program Files\Wireshark\diameter/dictionary.xml. The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: Im not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net This email has been processed by SmoothZap - www.smoothwall.net This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, The cleared flag bits seem not to be the real problem that causes Wireshark not to recognize this Volume-Quota-Threshold AVP. I removed the 'vendor-id="TGPP"' part from the related XML file line, and set vendor-bit="mustnot". That did not help. Furthermore, the 3GPP AVP Quota-Holding-Time, on the other hand, is recognized without any problem, while all its flag bits are cleared too. Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: maandag 26 februari 2007 13:27 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi, The problem is that Wireshark expects this to be a vendor AVP but it's sent as a "normal" one. I think this was changed in more recent versions of the 3GPP doc's to be Vendor specific AVP:s. The simplest soulution for you is to edit the XML file and remove "Vendor-id="TGPP" " from the relevant AVP:s Best regards Anders _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederiek Debruyne Sent: den 26 februari 2007 09:10 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi Anders, Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case? Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:42 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, That should suffice, can you send me a small sample file? Best regards Anders _ Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders _ Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, The problem is that Wireshark expects this to be a vendor AVP but it's sent as a "normal" one. I think this was changed in more recent versions of the 3GPP doc's to be Vendor specific AVP:s. The simplest soulution for you is to edit the XML file and remove "Vendor-id="TGPP" " from the relevant AVP:s Best regards Anders From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederiek Debruyne Sent: den 26 februari 2007 09:10 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi Anders, Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case? Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:42 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, That should suffice, can you send me a small sample file? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, Yes I got the file. I'm quite busy but are hoping to be able to look at it today. Best regards Anders From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederiek Debruyne Sent: den 26 februari 2007 09:10 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Diameter unknown AVPs Hi Anders, Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case? Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:42 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, That should suffice, can you send me a small sample file? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi Anders, Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case? Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:42 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, That should suffice, can you send me a small sample file? Best regards Anders _ Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders _ Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, That should suffice, can you send me a small sample file? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 16:27 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] Diameter unknown AVPs Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net <http://www.smoothwall.net/> <>___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, The "Attempt to load/use Diameter XML Dictionary" checkbox, in the preferences for Diameter, is checked. The Diameter XML dictionary is set to "C:\Program Files\Wireshark\diameter/dictionary.xml". The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification. I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml: I'm not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized. Regards, Frederiek _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Broman (AL/EAB) Sent: vrijdag 23 februari 2007 16:04 To: Community support list for Wireshark Subject: SV: [Wireshark-users] Diameter unknown AVPs Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders _ Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] Diameter unknown AVPs
Hi, AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter XML files if those preferences are set. See the wiki page for details. The XML library is more updated than the file. What AVP:s are not recognised? Best regards Anders Från: [EMAIL PROTECTED] genom Frederiek Debruyne Skickat: fr 2007-02-23 15:33 Till: wireshark-users@wireshark.org Ämne: [Wireshark-users] Diameter unknown AVPs Hi, I frequently use Wireshark to analyze Diameter protocol traffic. I notice that not all AVPs are recognized. That is, the packet details frame contains a line with "Unknown AVP" in that case. What must be done to make Wireshark recognize these AVPs? I am using the latest Wireshark version, i.e. version 0.99.5. Regards, Frederiek This email has been processed by SmoothZap - www.smoothwall.net ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users <>___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
