Re: [wsjt-devel] Stale Lock

[David Fisher]

It’s in the “bin” directory along side WSJT-x.

Dave / NX6D



From: Phil Theis 
Sent: Wednesday, October 11, 2017 9:08:32 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Stale Lock


Where will I find rigctld-wsjtx?

Remember, the driver for Flex 6xxx doesn't use (or shouldn't use) CAT com 
ports; it goes directly over the network via TCP.

Who wrote the original 6xxx driver, perhaps we can get info from them?

73,

Phil K3TUF

On 10/11/2017 11:51 PM, Black Michael via wsjt-devel wrote:
One or more of you needs to run rigctld-wsjtx to help debug this.

Do you know how to run rigctld-wsjtx?
First you do this to get a list of the rig numbers.  346 is the 746Pro
rigctld-wsjtx -l
then
rigctld-wstx -m 346 -s 19200 -r COM2 -v
Then set up the wsjtx rig to Hamlib NET rigctl.I explained on an earlier email 
how to do this.

See if you can repeat the problem.  That will help tell if it's hamlib or 
wsjt-x causing it.
The last group of lines should tell the story.

de Mike W9MDB

On Wednesday, October 11, 2017, 9:04:17 PM CDT, Ria Jairam 
 wrote:


WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software should 
timeout a TCP connection it can’t close instead of staying hung.

However this may be peculiar to Hamlib rather than WSJT-X. We are not the only 
flex users having this issue and literally nothing else connected to the radio 
has this problem.

Anyway either myself, Phil and others would be more than happy to help debug 
any issues with flex radios connecting to WSJT-X or any software for that 
matter.

73
Ria, N2RJ

On Wed, Oct 11, 2017 at 5:06 PM Dave 
> wrote:
Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should raise 
the issue with Flex.

BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe as I 
just scroll down to the bottom of the lists and find up to four instances 
listed depending how many slices I'm running when it freezes.

73 Dave W3DLQ


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Black Michael via wsjt-devel]

If you installed in the standard location:
By default it connects to 127.0.0.1:4532 -v
If you need a different address or port then for example:
c:\wsjt\wsjt-x\rigctld-wsjtx.exe -m 136 -r 127.0.0.2:4533 -v
de Mike W9MDB



On Wednesday, October 11, 2017, 11:10:48 PM CDT, Phil Theis 
 wrote:  
 
  
Where will I find rigctld-wsjtx? 
 
 
Remember, the driver for Flex 6xxx doesn't use (or shouldn't use) CAT com 
ports; it goes directly over the network via TCP. 
 
 
Who wrote the original 6xxx driver, perhaps we can get info from them?
 
73,
 
Phil K3TUF
 
 
 On 10/11/2017 11:51 PM, Black Michael via wsjt-devel wrote:
  
One or more of you needs to run rigctld-wsjtx to help debug this. 
   Do you know how to run rigctld-wsjtx? First you do this to get a list of the 
rig numbers.  346 is the 746Pro
  rigctld-wsjtx -l then rigctld-wstx -m 346 -s 19200 -r COM2 -v Then set up 
the wsjtx rig to Hamlib NET rigctl.I explained on an earlier email how to do 
this. 
  See if you can repeat the problem.  That will help tell if it's hamlib or 
wsjt-x causing it. The last group of lines should tell the story. 
  de Mike W9MDB
   
  On Wednesday, October 11, 2017, 9:04:17 PM CDT, Ria Jairam 
 wrote:  
  
  WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software 
should timeout a TCP connection it can’t close instead of staying hung.  
  However this may be peculiar to Hamlib rather than WSJT-X. We are not the 
only flex users having this issue and literally nothing else connected to the 
radio has this problem. 
  Anyway either myself, Phil and others would be more than happy to help debug 
any issues with flex radios connecting to WSJT-X or any software for that 
matter. 
  73 Ria, N2RJ 
   On Wed, Oct 11, 2017 at 5:06 PM Dave  wrote:
  
  Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should raise 
the issue with Flex.   
  BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe as I 
just scroll down to the bottom of the lists and find up to four instances 
listed depending how many slices I'm running when it freezes. 
  73 Dave W3DLQ
  
 
   
--
 Check out the vibrant tech community on one of the world's most
 engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
  
--
 Check out the vibrant tech community on one of the world's most
 engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  
  
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
  
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Phil Theis]

Where will I find rigctld-wsjtx?

Remember, the driver for Flex 6xxx doesn't use (or shouldn't use) CAT 
com ports; it goes directly over the network via TCP.


Who wrote the original 6xxx driver, perhaps we can get info from them?

73,

Phil K3TUF


On 10/11/2017 11:51 PM, Black Michael via wsjt-devel wrote:

One or more of you needs to run rigctld-wsjtx to help debug this.

Do you know how to run rigctld-wsjtx?
First you do this to get a list of the rig numbers. 346 is the 746Pro
rigctld-wsjtx -l
then
rigctld-wstx -m 346 -s 19200 -r COM2 -v
Then set up the wsjtx rig to Hamlib NET rigctl.I explained on an 
earlier email how to do this.


See if you can repeat the problem.  That will help tell if it's hamlib 
or wsjt-x causing it.

The last group of lines should tell the story.

de Mike W9MDB

On Wednesday, October 11, 2017, 9:04:17 PM CDT, Ria Jairam 
 wrote:



WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any 
software should timeout a TCP connection it can’t close instead of 
staying hung.


However this may be peculiar to Hamlib rather than WSJT-X. We are not 
the only flex users having this issue and literally nothing else 
connected to the radio has this problem.


Anyway either myself, Phil and others would be more than happy to help 
debug any issues with flex radios connecting to WSJT-X or any software 
for that matter.


73
Ria, N2RJ

On Wed, Oct 11, 2017 at 5:06 PM Dave > wrote:


Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we
should raise the issue with Flex.

BTW. I said I killed the jte.exe entries.  I should have said
wsjtx.exe as I just scroll down to the bottom of the lists and
find up to four instances listed depending how many slices I'm
running when it freezes.

73 Dave W3DLQ



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net

https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Black Michael via wsjt-devel]

One or more of you needs to run rigctld-wsjtx to help debug this.
Do you know how to run rigctld-wsjtx?First you do this to get a list of the rig 
numbers.  346 is the 746Pro
rigctld-wsjtx -lthenrigctld-wstx -m 346 -s 19200 -r COM2 -vThen set up the 
wsjtx rig to Hamlib NET rigctl.I explained on an earlier email how to do this.
See if you can repeat the problem.  That will help tell if it's hamlib or 
wsjt-x causing it.The last group of lines should tell the story.
de Mike W9MDB

On Wednesday, October 11, 2017, 9:04:17 PM CDT, Ria Jairam 
 wrote:  
 
 WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software 
should timeout a TCP connection it can’t close instead of staying hung. 
However this may be peculiar to Hamlib rather than WSJT-X. We are not the only 
flex users having this issue and literally nothing else connected to the radio 
has this problem.
Anyway either myself, Phil and others would be more than happy to help debug 
any issues with flex radios connecting to WSJT-X or any software for that 
matter.
73Ria, N2RJ
On Wed, Oct 11, 2017 at 5:06 PM Dave  wrote:

Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should raise 
the issue with Flex.  
BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe as I 
just scroll down to the bottom of the lists and find up to four instances 
listed depending how many slices I'm running when it freezes.
73 Dave W3DLQ


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Black Michael via wsjt-devel]

It's note "telnet" -- that's a specific TCP protocol on a specific port.
But yes...there is TCP capability built-in.  I wrote an interface for FLRIg 
that does TCP for example.And the Flex6xxx also does TCP.
de Mike W9MDB


On Wednesday, October 11, 2017, 9:07:31 PM CDT, Phil Theis  
wrote:  
 
  
I'm not familiar with hamlib, but are there any telnet facilities built in? The 
Flex API is a very easy protocol.
 
73,
 
Phil K3TUF
 
 
 On 10/11/2017 10:01 PM, Ria Jairam wrote:
  
  WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software 
should timeout a TCP connection it can’t close instead of staying hung.  
  However this may be peculiar to Hamlib rather than WSJT-X. We are not the 
only flex users having this issue and literally nothing else connected to the 
radio has this problem. 
  Anyway either myself, Phil and others would be more than happy to help debug 
any issues with flex radios connecting to WSJT-X or any software for that 
matter. 
  73 Ria, N2RJ 
  On Wed, Oct 11, 2017 at 5:06 PM Dave  wrote:
  
  Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should raise 
the issue with Flex.   
  BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe as I 
just scroll down to the bottom of the lists and find up to four instances 
listed depending how many slices I'm  running when it freezes. 
  73 Dave W3DLQ
  
 
   
--
 Check out the vibrant tech community on one of the world's most
 engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
   
  
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
  
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Ria Jairam]

Hamlib can do TCP connections to the CAT program. Technically telnet
is basically just a TCP stream.

73
Ria, N2RJ

On Wed, Oct 11, 2017 at 10:06 PM, Phil Theis  wrote:
> I'm not familiar with hamlib, but are there any telnet facilities built in?
> The Flex API is a very easy protocol.
>
> 73,
>
> Phil K3TUF
>
>
> On 10/11/2017 10:01 PM, Ria Jairam wrote:
>
> WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software
> should timeout a TCP connection it can’t close instead of staying hung.
>
> However this may be peculiar to Hamlib rather than WSJT-X. We are not the
> only flex users having this issue and literally nothing else connected to
> the radio has this problem.
>
> Anyway either myself, Phil and others would be more than happy to help debug
> any issues with flex radios connecting to WSJT-X or any software for that
> matter.
>
> 73
> Ria, N2RJ
>
> On Wed, Oct 11, 2017 at 5:06 PM Dave  wrote:
>>
>> Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should
>> raise the issue with Flex.
>>
>> BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe
>> as I just scroll down to the bottom of the lists and find up to four
>> instances listed depending how many slices I'm running when it freezes.
>>
>> 73 Dave W3DLQ
>>
>>
>>
>> --
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Phil Theis]

I'm not familiar with hamlib, but are there any telnet facilities built 
in? The Flex API is a very easy protocol.


73,

Phil K3TUF


On 10/11/2017 10:01 PM, Ria Jairam wrote:
WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any 
software should timeout a TCP connection it can’t close instead of 
staying hung.


However this may be peculiar to Hamlib rather than WSJT-X. We are not 
the only flex users having this issue and literally nothing else 
connected to the radio has this problem.


Anyway either myself, Phil and others would be more than happy to help 
debug any issues with flex radios connecting to WSJT-X or any software 
for that matter.


73
Ria, N2RJ

On Wed, Oct 11, 2017 at 5:06 PM Dave > wrote:


Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we
should raise the issue with Flex.

BTW.  I said I killed the jte.exe entries.  I should have said
wsjtx.exe as I just scroll down to the bottom of the lists and
find up to four instances listed depending how many slices I'm
running when it freezes.

73 Dave W3DLQ



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net

https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Ria Jairam]

WSJT-X hanging on exit definitely isn’t a SmartSDR problem. Any software
should timeout a TCP connection it can’t close instead of staying hung.

However this may be peculiar to Hamlib rather than WSJT-X. We are not the
only flex users having this issue and literally nothing else connected to
the radio has this problem.

Anyway either myself, Phil and others would be more than happy to help
debug any issues with flex radios connecting to WSJT-X or any software for
that matter.

73
Ria, N2RJ

On Wed, Oct 11, 2017 at 5:06 PM Dave  wrote:

> Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should
> raise the issue with Flex.
>
> BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe
> as I just scroll down to the bottom of the lists and find up to four
> instances listed depending how many slices I'm running when it freezes.
>
> 73 Dave W3DLQ
>
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] valid prefixes in JT65

[Bill Somerville]

On 11/10/2017 13:51, Wolfgang wrote:

There was a discussion in a Google group about valid prefixes and suffixes that 
can be used
in JT65 - and by the JT65-HB9HQX software.

'jt65code.exe -t' lists all possible variations. Prefix 'A000' to '' should 
be possible
and they will work by testing them with jt65code.exe.

Valid prefixes are listed in 
thehttp://physics.princeton.edu/pulsar/K1JT/JT65.pdf  document,
some 4 char prefixes starting with a digit, or for example, per list 'VK9M' 
showing
other results with jt65code.exe and tested in WSJT-X 1.7 devel 8164

But "CQ 3D3R/OE1MWW RH97" results in "CQ 3D3R/OE1MWW" the QRA locator is 
missing.

If I just change it to "CQ AD3R/OE1MWW RH97" or "CQ ZD3R/OE1MWW RH97" it will 
be sent
as typed. Otherwise, the listed VK9M in the JT65.pdf, using it with 
jt65code.exe gives
me instead of "CQ VK9M/OE1MWW JN88" just "CQ VK9M/OE1MWW", the QRA locator is 
missing in
this case. Replacing the '9' with an 'Z' for testing, will be coded as typed.

All this is not important at the moment, just, which guideline should be used?


Hi Wolfgang,

there are two different types of compound calls supported in WSJT-X, 
type 1 which use the predefined suffixes and prefixes that are shown in 
the help menu and newer type 2 compound calls that support a wider range 
of prefixes and suffixes limited by format rather to a predefined list. 
Both types have limitations on the messages that can be sent. Type 1 
cannot be sent with grid squares in CQ/QRZ and TX1 messages but do 
include both full callsigns in those message types. Type 2 compound 
callsigns can send a grid and full callsign in a CQ/QRZ message but 
cannot send a full callsign with another callsign in other message 
types, instead having to send the base callsign only or a DE 
 message with a report, R+report or 73 message. The User 
Guide contains examples of QSOs with both types of compound callsign.


73
Bill
G4WJS.


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale Lock

[Phil Theis]

The Flex API works fine, I use it all the time.

First I am confused on what to enter in the Server entry, when I enter 
the IP and Port of the Radio server, it sees the client and I'd have to 
use wireshark to determine what the program is doing to interrogate.


Phil K3TUF


On 10/11/2017 5:04 PM, Dave wrote:
Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should 
raise the issue with Flex.


BTW. I said I killed the jte.exe entries.  I should have said 
wsjtx.exe as I just scroll down to the bottom of the lists and find up 
to four instances listed depending how many slices I'm running when it 
freezes.


73 Dave W3DLQ




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Stale Lock

[Dave]

Sounds more like a problem with SmartSDR than WSJT-X.  Maybe we should
raise the issue with Flex.

BTW.  I said I killed the jte.exe entries.  I should have said wsjtx.exe as
I just scroll down to the bottom of the lists and find up to four instances
listed depending how many slices I'm running when it freezes.

73 Dave W3DLQ
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Paul Mandel (imap)]

So am I.  If I run two slices I get wo sale locks.

 

Paul –w4pgm

 

From: Ria Jairam [mailto:rjai...@gmail.com] 
Sent: Wednesday, October 11, 2017 4:09 PM
To: WSJT software development 
Subject: Re: [wsjt-devel] Stale lock

 

For what it’s worth I’m also experiencing the same symptoms of Phil and I’m 
also using a flex radio with the ports set to TCP. When I change it to TS2000 
and use regular CAT ports the problem goes away. 

73
Ria, N2RJ

On Wed, Oct 11, 2017 at 4:03 PM Phil Theis  > wrote:

What is normal? I click on the X in the upper right.

Phil K3TUF

 

On 10/11/2017 3:53 PM, Black Michael via wsjt-devel wrote:

That usually indicates jt9.exe is still running.

Is WSJT-X crashing on you?  That most always leaves jt9.exe running and you 
can't remove the lock file until it's killed in task manager.

Are you exiting WSJT-X normally?

 

de Mike W9MDB

 

On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis  
  wrote: 

 

 

With RC2 I keep getting the stale lock error and have to restart the 
computer to get going again.

Also can't get the Flex 6xxx to convey frequency; I always resort to 
CAT, which works fine.

Phil K3TUF 



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Stale lock. Dave Quick

[Dave Q]

Echo, echo, echo.. For what it’s worth I’m also experiencing the same 
symptoms of Phil and Ria.  I’m also using a flex radio with the ports set to 
TCP.  Echo off. 

Thought it was just me. I just kill the one or two jt9.exe with task manager 
and restart the slices. 

Dave  W3DLQ



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Phil Theis]

wasn't jt9 it was wsjt.exe which I stopped and got working again.

Tried Exit and that worked on restart

Tried the X again, and now that is working.

Anomaly I guess

Phil K3TUF


On 10/11/2017 4:10 PM, Black Michael via wsjt-devel wrote:
That should work.  If you get the lock error check to see if jt9.exe 
is still running in task manager.
The you can kill it and answer the lock dialog with Retry and it 
should work.


Next question is why isn't jt9.exe being terminated correctly?

Try renaming your WSJT-X.ini file and start WSJT-X with a blank slate 
and exit it to see if it works then.


de Mike W9DB


On Wednesday, October 11, 2017, 3:03:40 PM CDT, Phil Theis 
 wrote:



What is normal? I click on the X in the upper right.

Phil K3TUF


On 10/11/2017 3:53 PM, Black Michael via wsjt-devel wrote:

That usually indicates jt9.exe is still running.
Is WSJT-X crashing on you?  That most always leaves jt9.exe running 
and you can't remove the lock file until it's killed in task manager.

Are you exiting WSJT-X normally?

de Mike W9MDB

On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis 
  wrote:



With RC2 I keep getting the stale lock error and have to restart the
computer to get going again.

Also can't get the Flex 6xxx to convey frequency; I always resort to
CAT, which works fine.

Phil K3TUF


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 


https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 


https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Black Michael via wsjt-devel]

Can you run rigctld-wsjtx and use Hamlib NET rigctl for the rig in WSJT-X and 
see if the problem persists with the TCP ports then?
de Mike W9MDB

 

On Wednesday, October 11, 2017, 3:11:16 PM CDT, Ria Jairam 
 wrote:  
 
 For what it’s worth I’m also experiencing the same symptoms of Phil and I’m 
also using a flex radio with the ports set to TCP. When I change it to TS2000 
and use regular CAT ports the problem goes away. 

73
Ria, N2RJ
On Wed, Oct 11, 2017 at 4:03 PM Phil Theis  wrote:

  
What is normal? I click on the X in the upper right.
 
Phil K3TUF
 
 
 On 10/11/2017 3:53 PM, Black Michael via wsjt-devel wrote:
  
   That usually indicates jt9.exe is still running. Is WSJT-X crashing on you?  
That most always leaves jt9.exe running and you can't remove the lock file 
until it's killed in task manager. Are you exiting WSJT-X normally?
  
  de Mike W9MDB 
  On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis 
 wrote:  
  
   With RC2 I keep getting the stale lock error and have to restart the 
 computer to get going again.
 
 Also can't get the Flex 6xxx to convey frequency; I always resort to 
 CAT, which works fine.
 
 Phil K3TUF 
 
--
 Check out the vibrant tech community on one of the world's most
 engaging tech sites, Slashdot.org! http://sdm.link/slashdot
 ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
   
  
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
  
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
 --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Ria Jairam]

For what it’s worth I’m also experiencing the same symptoms of Phil and I’m
also using a flex radio with the ports set to TCP. When I change it to
TS2000 and use regular CAT ports the problem goes away.

73
Ria, N2RJ
On Wed, Oct 11, 2017 at 4:03 PM Phil Theis  wrote:

> What is normal? I click on the X in the upper right.
>
> Phil K3TUF
>
> On 10/11/2017 3:53 PM, Black Michael via wsjt-devel wrote:
>
> That usually indicates jt9.exe is still running.
> Is WSJT-X crashing on you?  That most always leaves jt9.exe running and
> you can't remove the lock file until it's killed in task manager.
> Are you exiting WSJT-X normally?
>
> de Mike W9MDB
>
> On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis
>   wrote:
>
>
> With RC2 I keep getting the stale lock error and have to restart the
> computer to get going again.
>
> Also can't get the Flex 6xxx to convey frequency; I always resort to
> CAT, which works fine.
>
> Phil K3TUF
>
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> ___
> wsjt-devel mailing 
> listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Phil Theis]

What is normal? I click on the X in the upper right.

Phil K3TUF


On 10/11/2017 3:53 PM, Black Michael via wsjt-devel wrote:

That usually indicates jt9.exe is still running.
Is WSJT-X crashing on you?  That most always leaves jt9.exe running 
and you can't remove the lock file until it's killed in task manager.

Are you exiting WSJT-X normally?

de Mike W9MDB

On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis 
 wrote:



With RC2 I keep getting the stale lock error and have to restart the
computer to get going again.

Also can't get the Flex 6xxx to convey frequency; I always resort to
CAT, which works fine.

Phil K3TUF


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Stale lock

[Black Michael via wsjt-devel]

That usually indicates jt9.exe is still running.Is WSJT-X crashing on you?  
That most always leaves jt9.exe running and you can't remove the lock file 
until it's killed in task manager.Are you exiting WSJT-X normally?

de Mike W9MDB
   On Wednesday, October 11, 2017, 2:05:03 PM CDT, Phil Theis  
wrote:  
 
 With RC2 I keep getting the stale lock error and have to restart the 
computer to get going again.

Also can't get the Flex 6xxx to convey frequency; I always resort to 
CAT, which works fine.

Phil K3TUF

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Stale lock

[Phil Theis]

With RC2 I keep getting the stale lock error and have to restart the 
computer to get going again.


Also can't get the Flex 6xxx to convey frequency; I always resort to 
CAT, which works fine.


Phil K3TUF

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] current build?

[Dan Malcolm]

Thanks Erik.  That will save questions later.

__
Dan – K4SHQ

From: Erik - [mailto:erikcarl...@live.com]
Sent: Wednesday, October 11, 2017 8:34 AM
To: WSJT software development 
Subject: Re: [wsjt-devel] current build?

You can know by checking 
https://sourceforge.net/p/wsjt/activity/?page=0=100#59d7acd35fcbc9472c435463

Erik

From: Dan Malcolm [mailto:k4...@outlook.com]
Sent: 11 October 2017 13:08
To: wsjtx-devel 
>
Subject: [wsjt-devel] current build?

I make a new build of the WSJT-X devel branch nearly every day.  For the last 
several days, all I get back after a build is the same r8164.  Did I miss 
something or is that right?

__
Dan – K4SHQ

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] current build?

[Erik -]

You can know by checking 
https://sourceforge.net/p/wsjt/activity/?page=0=100#59d7acd35fcbc9472c435463

Erik

From: Dan Malcolm [mailto:k4...@outlook.com]
Sent: 11 October 2017 13:08
To: wsjtx-devel 
Subject: [wsjt-devel] current build?

I make a new build of the WSJT-X devel branch nearly every day.  For the last 
several days, all I get back after a build is the same r8164.  Did I miss 
something or is that right?

__
Dan - K4SHQ

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] current build?

[Dan Malcolm]

I make a new build of the WSJT-X devel branch nearly every day.  For the last 
several days, all I get back after a build is the same r8164.  Did I miss 
something or is that right?

__
Dan – K4SHQ

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] valid prefixes in JT65

[Wolfgang]

There was a discussion in a Google group about valid prefixes and suffixes that 
can be used
in JT65 - and by the JT65-HB9HQX software.

'jt65code.exe -t' lists all possible variations. Prefix 'A000' to '' should 
be possible
and they will work by testing them with jt65code.exe.

Valid prefixes are listed in the 
http://physics.princeton.edu/pulsar/K1JT/JT65.pdf document,
some 4 char prefixes starting with a digit, or for example, per list 'VK9M' 
showing
other results with jt65code.exe and tested in WSJT-X 1.7 devel 8164

But "CQ 3D3R/OE1MWW RH97" results in "CQ 3D3R/OE1MWW" the QRA locator is 
missing.

If I just change it to "CQ AD3R/OE1MWW RH97" or "CQ ZD3R/OE1MWW RH97" it will 
be sent
as typed. Otherwise, the listed VK9M in the JT65.pdf, using it with 
jt65code.exe gives
me instead of "CQ VK9M/OE1MWW JN88" just "CQ VK9M/OE1MWW", the QRA locator is 
missing in
this case. Replacing the '9' with an 'Z' for testing, will be coded as typed.

All this is not important at the moment, just, which guideline should be used?


73 de Wolfgang
OE1MWW

--


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel