Andy,
I have start frequency of Wide Graph at 100Hz, even tried with start at 0Hz Rx
freq. never goes below 200. Same for Tx freq.
Same thing if I enter numeric values in corresponding boxes. Should mention
that I am running FT8/4.
73 Notko/SA5NTK
From: Andrew Neumeier via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: den 22 juni 2022 21:56
To: Notko Mermerski via wsjt-devel
Cc: Andrew Neumeier
Subject: Re: [wsjt-devel] Change request
Notko,
Can you not just change the start frequency in the Wide Graph? Mine is set at
100hz.
73,
Andy, ka2uqw
On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via wsjt-devel
mailto:wsjt-devel@lists.sourceforge.net> >
wrote:
Hi everybody,
I am running WSJT-X 2.5.4.
Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red
bracket) below 200Hz. I can understand that there is a rationale for this
limit, but modern TRXes are capable of receiving below 200Hz. I am seeing
decoded messages below 200Hz and I would like to be able to monitor them in the
Rx pane of WSTJ-X main window.
I am aware that there is a workaround to achieve this, but still, it is a
workaround.
Would it be possible to lower this limit to at least 100 Hz?
73 Notko/SA5NTK
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel