[XFree86] In need of asisatance. 3dfx drivers needed....
I am trying to get the drivers for my voodoo3 card (PCI) to install on x86 (Solaris 9). Im having difficulty locating the drivers. Any help is greatly appresciated. ALSO HOW WOULD I INSTALL IT ON SOLARIS THANK YOU.
[XFree86] Mailing BP Server
Dear xfree86@xfree86.org: BulletProof server: Fresh IPs 1024MB RAM P4 CPU 72GB SCSI Dedicated 100M fiber Unlimited Data Transfer Any software Based in China US$599.00 for per month May use the server for: Bulk Hosting Direct Mailing We also supply Target list according to your order and sending out your message for you. Looking forward to do business with you. Cheers! Robert Server Dept [EMAIL PROTECTED] For off: [EMAIL PROTECTED] ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] X crash
Hi Gentlemen ! My X server crashed under Red Hat 8.0 and I wasn't able to restart it. So I have rebooted the system. I want to report this event, but I'm affraid file /var/log/XFree86.0.log is not enough for detection. So, send me please the list of files (log files) to be sent. Thanks, best regards, Robert Sill, Nove Zamky, Slovakia, Europe XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-19.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 12 05:39:29 EST 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 16 09:04:02 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Intel 815" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8001580c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1130 card 8086,4541 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,1132 card 8086,4541 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2440 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244b card 8086,4541 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2443 card 8086,4541 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 8086,4541 rev 01 class 0c,03,00 hdr 00 (II) PCI: 01:09:0: chip 9005,0080 card 9005,e2a0 rev 02 class 01,00,00 hdr 00 (II) PCI: 01:0b:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0xd000 - 0xd0ff (0x100) IX[B] [1] -1 0xd400 - 0xd4ff (0x100) IX[B] [2] -1 0xd800 - 0xd8ff (0x100) IX[B] [3] -1 0xdc00 - 0xdcff (0x100) IX[B
[XFree86] [XFree86(TM) Bug Report] X server crashes on my Intel i815: "Active ring not flushed"
Regarding: X server crashes on my Intel i815: "Active ring not flushed" Email: [EMAIL PROTECTED] XFree86 Version: 4.2.1 OS: Mandrake 9.0 (2.4.19 kernel with no customisation, I kept the one from Mandrake) Area: Xserver Server: XFree86 (The XFree86 4.x server) Video Card: I don't know exactly how to find it, I only know that the chipset is i815. An X -scanpci follows: (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1130 card 8086,1130 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,1132 card 103c,1245 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 103c,1249 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:04:0: chip 10b7,9200 card 103c,1246 rev 78 class 02,00,00 hdr 00 (II) PCI: End of PCI scan Probing for PCI devices (Bus:Device:Function) (0:0:0) Intel unknown card (0x1130) using a Intel i815 Bridge (0:2:0) HP card using a Intel i815 (0:30:0) unknown chip (DeviceId 0x2418) from Intel (0:31:0) unknown chip (DeviceId 0x2410) from Intel (0:31:1) Intel unknown card (0x2411) using an unknown chip (DeviceId 0x2411) from Intel (0:31:2) Intel unknown card (0x2412) using an unknown chip (DeviceId 0x2412) from Intel (0:31:3) Intel unknown card (0x2413) using an unknown chip (DeviceId 0x2413) from Intel (0:31:5) HP card using an unknown chip (DeviceId 0x2415) from Intel (1:4:0) HP card using an unknown chip (DeviceId 0x9200) from 3COM Description: XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.4.log", Time: Tue Feb 11 20:57:53 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "fr" (**) XKB: layout: "fr" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (WW) No FontPath specified. Using compiled-in default. (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1130 card 8086,1130 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,1132 card 103c,1245 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1e:
[XFree86] [XFree86(TM) Bug Report] Unable to initialise int10 interface (secondry adapter)
Regarding: Unable to initialise int10 interface (secondry adapter) Email: [EMAIL PROTECTED] XFree86 Version: 4.2.99.4 OS: Linux 2.4.19 (gentoo r10) Area: Xlib Server: Other, specify below Video Card: Primary: PCI:*(1:0:0) Silicon Integrated Systems [SiS] 86C326 5598/6326 rev 11, Mem @ 0xf780/23, 0xf500/16, I/O @ 0xd800/7, BIOS @ 0xf77f /16 Secondary: PCI: (0:14:0) ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] rev 122, Mem @ 0xf600/24, 0xf480/12, I/O @ 0xa400/8, BIOS @ 0xf5fe/17 Description: This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.4 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 20 January 2003 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.19-gentoo-r10 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 22 19:21:27 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Card1" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "Xinerama" "On" (**) Xinerama: enabled (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.99.4, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.99.4, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0605 card 1043,802c rev 81 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8605 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 1106,0686 card 1043,802c rev 22 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 1106,0571 card , rev 10 class 01,01,8a hdr 00 (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:04:4: chip 1106,3057 card , rev 30 class 06,00,00 hdr 00 (II) PCI: 00:0d:0: chip 4005,4000 card 4005,4000 rev 00 class 04,01,00 hdr 00 (II) PCI: 00:0e:0: chip 1002,4756 card 1002,0088 rev 7a class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6326 card 1039,6326 rev 0b class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xd000 - 0xdfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf500 - 0xf5ef (0xf0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf770 - 0xf
[XFree86] problems setting up the x windows system
I have just setup my copy of linux mandrake 9.0 and when i tried to run the X Windows System i received the following error XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb 24 00:09:19 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (EE) No core pointer device specified (EE) Unable to determine the screen layout (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] My hardware: Nvidia geforce 4 TI4200 - installed the new 4191 drivers from nvidias website 512 ram 2.4 ghz intel cpu 60 gb hard drive _ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] setxkbmap with user supplied data?
Hello, I'm wondering whether there's a way to use setxkbmap with data that's not stored in /usr/X11R6/lib/X11/xkb, but in e.g. a user's home directory or that's given directly on the command line. That would allow using setxkbmap instead of xmodmap for all keyboard configuration issues. If this isn't possible, are there security issues or has it just no been implemented? I'm using 4.2.1 btw., in case that matters. Please CC: me on replies since I'm not subscribed to the list. Cheers Robert ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] ATI Radeon 7500
I picked up an ebay special Radeon 7500 and have been trying for about two weeks to get it to work. I figure anything that takes two weeks to get working is broken beyond repair, and thus, expect no resolution. Firstly, I am running the debian installed version (from woody)... Version 4.1.0.1. Secondly, the important section of the XF86Config-4: Section "Device" Identifier "ATI Radeon 7500" Driver "radeon" Option "AGPMode" "1" Option "UseFBDev" "false" BusID "PCI:1:0:0" # Insert Clocks lines here if appropriate EndSection Thirdly, the device listing as reported by lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5157 Fourthly, the XFree86 log important lines (full version attached) (--) PCI:*(1:0:0) ATI unknown chipset (0x5157) rev 0, Mem @ 0xe000/27, 0xed00/16, I/O @ 0x9000/8 (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE (AGP) (II) Primary Device is: PCI 01:00:0 (EE) No devices detected. Fatal server error: no screens found Thanks for any help and suggestions Rob This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 27 22:07:03 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (**) Option "defaultserverlayout" "Simple Layout" (**) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "A700" (**) | |-->Device "ATI Radeon 7500" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:1e:0: chip 8086,244e card , rev 12 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2440 card , rev 12 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244b card 8086,2442 rev 12 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2442 card 8086,2442 rev 12 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2443 card 8086,2442 rev 12 class 0c,05,00 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 8086,2442 rev 12 class 0c,03,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2445 card 414c,4710 rev 12 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5157 card 1787,0207 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:02:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loadin
[XFree86] ati R250 9000 washed out color
Hi I have an ATI ALL-IN-WONDER Rv250 Radeon 9000 agp board on my system which is running RH 9.0 kernel 2.4.20. I have upgraded X to 4.3.0-13 and have been able to get X to run but the colors are all washed out. I cought a glimps of someone else having this problem but when I tried to find any response I lost the thread. Any help would be appreciated I have attached my XF86Config file and my /var/log/XFree86.0.log. The commented out Chipid which is supposed to make the board look like a Radeon 8500 did not help. Any help would be appreciated Thanks Bob. XF86Config Description: Binary data XFree86.0.log Description: Binary data
[XFree86] DRI problem with Matrox G450
I have a Matrox G450 (dual head) card and when starting an Application that uses openGL I get the following message on startup. Xlib: extension "XFree86-DRI" missing on display ":0.0". This happens on a SuSE 8.2 system where libGL.so points to libGL.so.1.2.xf86_glx when I point libGL.so to libGL.so.1.4.mesasoft I don't get the message but I get floating point exceptins and the app crashes. The relevant snipet from XF86Config is as follows. Section "Device" BoardName"G450" BusID"1:0:0" Driver "mga" Identifier "Device[0]" Option "NoHal" Screen 0 VendorName "Matrox" EndSection Section "Device" BoardName"G450" BusID"1:0:0" Driver "mga" Identifier "Device[1]" Option "NoHal" Screen 1 VendorName "Matrox" EndSection What am I missing? Thanks for your help. Robert -- Robert Schweikert <[EMAIL PROTECTED]> ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] help please
ATI has been giving me no real answers on this subject, and i figured you might be able to help me. I have a Radeon 9700 pro that works fin under xfree86 4.1 and 4.2 with drivers from ATI. my question is how can I get some 3D acelleration under 4.3.0 which came with distro that I have installed now (Mandrake 9.1) I curently use the default VESA complient driver for 2D work without fullscreen support. if you can help me, please let me know. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] xfree crash #1
My XFree86 crashed today, and here is a copy of the log: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 04 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jul 12 14:22:51 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "VESA Framebuffer" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8008, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0630 card , rev 20 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:01:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 1039,0900 card 1039,0900 rev 81 class 02,00,00 hdr 00 (II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0f:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 80 (II) PCI: 00:0f:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6300 card 1039,6300 rev 20 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xcfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd7e0 - 0xd7ef (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xc7c0 - 0xd7cf (0x1010) MX[B] (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D rev 32, Mem @ 0xc800/27, 0xd7ee/17, I/O @ 0xcc80/7 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe000 from 0xefff to 0xdfff (II) Active PC
[XFree86] xfree crash #2
XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 04 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jul 12 14:51:27 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "VESA Framebuffer" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0630 card , rev 20 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:01:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 1039,0900 card 1039,0900 rev 81 class 02,00,00 hdr 00 (II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0f:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 80 (II) PCI: 00:0f:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6300 card 1039,6300 rev 20 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xcfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd7e0 - 0xd7ef (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xc7c0 - 0xd7cf (0x1010) MX[B] (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D rev 32, Mem @ 0xc800/27, 0xd7ee/17, I/O @ 0xcc80/7 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe000 from 0xefff to 0xdfff (II) Active PCI resource ranges: [0] -1 0 0xf7fff000 - 0xf
[XFree86] Our new seminar dates
Listed here are the 3 seminars that Robert Seviour will be presenting in various locations around the world between now and March 2004. For further info please send us your details and we will send our brochure pack by return. Selling for Engineers One-day Seminar The Selling for Engineers seminar is a good introduction to effective sales principles for people who are new to selling, and also a useful refresher for 'old hands'. It applies to selling both technical products and intangible services. Many Sales Engineers have been learning the technical skills of their job for years but have had little formal training in selling. This course helps correct that imbalance. Typical job titles of delegates: Sales Engineer, Account Executive and Business Development Manager. Fee for this event is £300. Telephone Sales Prospecting for Engineers One-day Workshop This event is a practical workshop teaching people in technical companies how to find new customers on the phone. It is applicable to business development for both tangible products and intangible services. The first session addresses whom to target, what to say and how to handle problems. The remainder of the day consists of live sales calls with coaching from Robert Seviour; the objective being to give delegates some positive experiences of prospecting, make sales appointments and maybe sell something! Please note that this telephone sales prospecting event is restricted to a maximum of six delegates to permit individual coaching. Fee for this event is £300. Closing Techniques Workshop One day workshop What if the customer says: " " 'It's too expensive' " " 'We're happy with our present supplier' " " 'I want to think about it' Can you handle these common objections? By far the most efficient way to be more profitable is to turn more of the enquiries you receive into paid orders. For this, the ability to resolve objections is critical - either you close or you lose the sale. And if you answer 'How much discount will you give me?' with: 'I'll ask my boss', you waste profit, which could be yours with a better reply. In only a day I will teach you techniques which overcome these objections and more. You will be able to use them immediately to win profitable orders. There is no need to lose business to your competitors or give big discounts. Fee for this event is £300. If you have never had any formal sales training or need a refresher, don't continue to work at a disadvantage. Reservations and information Please contact Sue on: Tel: +44(0)1481 720 294 Fax: +44(0)1481 720 317 If sales training is not an issue for your company please reply to this email with the word "DELETE" in the subject line. We will remove your details promptly. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Dual head SIS651 card: two screens on 1 X, or separate x servers ?
Hello, I'm newbie in this area and have following questions: I have sis651 dual head card with video bridge for secondary TV/DVI output. Now I have setup system according to sis manuals, but have questions: - in manuals it is said that secondary output should always be master (initializes first) ? Now I get login screen on TV, but would really like to switch and have login and master screen on first VGA and only smaller X desktop(running subset multimedia applications on TV out - like Freevo) on secondary TV output - any hint. - I can also have two input devices (mouse+keyboard for VGA, and ATI remote wonder (RF remote) as mouse+keyboard) so screens could be fully independent. So 1 or two X servers, this is the question and what are differences ? Somewhere I read that X forbids access to HW - that means also for another X server or am I wrong? - Could I gain something if I use Framebuffer for secondary TV output ? Thanks, Regards, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Mplayer too slow and crashing due to "bad usage of CPU/RAM"
Hello, I have problem that mplayer is too slow in xfree86 (I have sis651 chipset - I've tried 4.3 with separate sis drivers and 4.3.99.14 with builtin sis driver). It plays quite slowly and from now and then crashes with signal in "video_decode" due to "Bad usage of CPU/ram". It crashes immediately if I fforward or backward. I saw entry 414. in Changelog and wonder whether this is the same problem. What was problem in 414. and was it solved OK or it remains ? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Sis driver: Dual head 2 screens quick question
Hello, I have dual head system on sis315. I've switched Xinerama off to have 2 independent screens. I get that OK, but have question: - Xfree establishes both screens by himself according to XF86Config. Can I do it manually and possibly with different window manager in each screen ? Where should I start looking - what files ? - I have keyboard and ATI remote that acts as another mouse and keyboard. Can I have for each screen separate keyboard and mouse? Or at least can I forbid mouse to go into second screen ? Thanks in advance, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Dual head 2 screens quick question
Hello, I have dual head system on sis315. I've switched Xinerama off to have 2 "independent" screens. I get that OK, but have question: - Xfree establishes both screens by himself according to XF86Config. Can I do it manually and possibly with different window manager in each screen ? Where should I start looking - what files ? I have rh9 and there seems like gdm is activated... - I have keyboard and ATI remote that acts as another mouse and keyboard. Can I have for each screen separate keyboard and mouse? Or at least can I forbid mouse to go into second screen ? Thanks in advance, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] SiS315 Dual Head separate x servers/WMs
Hello, I'm trying to do the same with Freevo. Could you give more info about your setup ? How do you separate sessions (I couldn't do this with gdm - If I autologin, both screens are logged in) ? Thanks, Robret. - Original Message - From: "Fredrik Högberg" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 04, 2003 1:34 PM Subject: [XFree86] SiS315 Dual Head separate x servers/WMs Hi! Im trying to do the following setup. Running a KDM session on CRT1 on my regular monitor while tty2 autologins and start a x session on CRT2/TV and running fvwm and autostarting MythTv (Video recording software). Maby it could be possible to run it as dual head in "Normal" mode but is it then possible to start different window managers. It might be possible to run it in xinerama but i'm unsure on how the keyboard would be handled. I don't need any keyboard for the CRT2 session as all input is done with lirc? Would this be possible at all, with --prefbusid patches or do i need a second graphics card + --prefbusid patches. Any help or ideas would be great. Fredrik Högberg ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] inet6
Hey fellows! Can anybody explain to me, please why I get those first 3 lines all the time??? Tnx a lot. Robert _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/robux:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.902 (4.4.0 RC 2) Release Date: 18 December 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.1-rc1 i686 [ELF] Current Operating System: Linux robux 2.6.0 #38 Sun Dec 28 17:36:47 CET 2003 i686 Build Date: 06 January 2004 Changelog Date: 05 January 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jan 6 11:44:21 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "AutoRepeat" "250 30" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "de" (**) XKB: layout: "de" (**) Option "XkbOptions" "grp:switch,grp:alt_shift_toggle,grp_led:scroll" (**) XKB: options: "grp:switch,grp:alt_shift_toggle,grp_led:scroll" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.99.902, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.99.902, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8088, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0305 card 1043,8033 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8305 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 1106,0686 card 1043,8033 rev 22 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 1106,0571 card , rev 10 class 01,01,8a hdr 00 (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:04:4: chip 1106,3057 card 1043,8033 rev 30 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 1106,3065 card 1186,1400 rev 43 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1260,3890 card 10b8,2802 rev 01 class 02,80,00 hdr 00 (II) PCI: 00:11:0: chip 105a,0d30 card 105a,4d33 rev 02 class 01,80,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0110 card 1102,1048 rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 n
[XFree86] Linux Laptop Xfree 4.3.0.1
Hello. Im setting up Linux from Scratch on a Compaq 12XL300 laptop . My issue is when I run X, it insists on going out the external monitor port, to detect for monitors. If I have a monitor plugged in, it initializes my lcd no problem, and everything works. But if no monitor is plugged in, then the lcd never comes up, at all. I have looked into this laptops bios, and there is no function key or option in the bios to disable the external vga port. I was hoping if there is a way to tell XFree86 not to do that kind of detection. Ive tried after hours many options, including from basic single mode configurations, to dual heads, and had the same result. Also de options NoDDC, and int_disp. Please help!! Thank you Robert Cariaga ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] X starts slowly on C&T F68554
Hi all, it takes about 10 sec for X to startup (on a notebook 266MHz Pentium MMX). After startx, X switches to graphic mode and then the screen is dark for about 10 sec and then the background appears and the window manager comes up normally. There is a similar efect also when switching back from console. I experienced no problems after init. The server works nicely. The XFree86.0.log is error-free, it has a warning about missing /dev/apm_bios and MTRR's, which I suppose is not the problem (?) This leaves with no clue what else to check, where to look. Any suggestions ? Thanks a lot, Robert data: XFree86 ver 4.3.0.1, compiled for linux 2.4.20 on pentium-MMX card: Chips and Technologies F68554 HiQVision This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.0.1 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 06 February 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 22 14:29:23 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "fi" (**) XKB: layout: "fi" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1022,700e card , rev 13 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1022,700f card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 147b,a702 rev 40 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 0c,05,00 hdr 00 (II) PCI: 00:09:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 1274,5000 card 4942,4c4c rev 01 class 04,01,00 hdr 00 (II) PCI: 01:05:0: chip 102b,0525 card 102b,0641 rev 85 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf600 - 0xf8ff (0x30
[XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ?
Hi, I've upgraded to kde3.2 , upgrade X (and then downgrade again - now is 4.3.0-29 I think (Suse supplied Xfree), put new sisdrv in it) but now I can't get previous performance of system (video was played fluently, low cpu % from X). Now I have cpu between 20-30% on AVI and 40-50% on mpeg2 recorded from pvr 350 (but I guess this more depends on needed rescaling). I'm on Suse 9.0, so I guess mtrr is enabled by default and I don't now where to look further. I've tried: xvtest gives approx 230 FPS. x11perf shmoput500 gives 210/sec I don't know what to see in xvinfo but it shows no problem at least to "blind" person like me. It seems like HW scaling is off, but don't know what to check or repair to get it working. If I try mplayer with -vo x11 in takes less cpu (6-8%), but when I do -vo xv it goes to described percentages and it also won't scale to fullscreen. I've tried to restore XF86Config but obviously turned some modules on that gave me some hard freezes so I am not to happy to make further tries. Could you please send me example config that works with XV so I'll take a further look for problem or any other advice how to track the problem ? Any other hint, check up to do ? Thanks in advance, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ?
Hi, thanks for response. I will be happy to supply log but would kindly ask for guidance (which one (whole or just a part when playing something)) ? Thanks, Robert. - Original Message - From: "Thomas Winischhofer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 11, 2004 11:36 PM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ? > Robert Rozman wrote: > > Hi, > > > > I've upgraded to kde3.2 , upgrade X (and then downgrade again - now is > > 4.3.0-29 I think (Suse supplied Xfree), put new > > sisdrv in it) but now I can't get previous performance of system (video was > > played fluently, low cpu % from X). > > > > Now I have cpu between 20-30% on AVI and 40-50% on mpeg2 recorded from pvr > > 350 (but I guess this more depends on needed rescaling). > > > > I'm on Suse 9.0, so I guess mtrr is enabled by default and I don't now where > > to look further. > > What about the X log...? Or perhaps dmesg? > > Hm, some of SuSE's 4.3 versions suffered from the O_SYNC bug. I don't > use SuSe, so I don't know which versions that were. > > > I've tried: > > xvtest gives approx 230 FPS. > > x11perf shmoput500 gives 210/sec > > xvtest reports 2200 FPS on my 2+ Ghz P4, and around 400/sec (if either > only CRT1 or CRT2 is active, arount 700) for x11perf -shmput500. Since > you didn't consider attaching your X log worth the effort, I am out of > ideas. > > Thomas > > -- > Thomas Winischhofer > Vienna/Austria > thomas AT winischhofer DOT net http://www.winischhofer.net/ > twini AT xfree86 DOT org > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ?
Hi, I'm sending files requested to give proper help. Like I said it seems like Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect that software scaling is going on, but don't know what to do to correct this ( I get CPU for X 40-50% and for mplayer or mythtv frontend about 20%). I have Asus pundit, with P4 2.4 G. I'll appreciate any help, since this is the only major problem left... I have: uname -a -> Linux pundit 2.4.21-144-default #1 Fri Nov 14 00:01:36 UTC 2003 i686 i686 i386 GNU/Linux cat /proc/mtrr > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 I'm attaching xfree log as suggested. I'm using Suse 9.0 pro and xfree is something like 4.3.0-29 version (stock provided with Suse, but did upgrade and downgrade again cause of same problems - but know it doesn't work also in stock version of xfree...) Thanks in advance for any help, Regards, Robert. - Original Message - From: "Mark Vojkovich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, March 12, 2004 7:21 PM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ? > The entire /var/log/XFree86.0.log file. > Also the output of /proc/mtrr is useful. > Perhaps also, "uname -a" for the kernel version. > >To me, your shmput500 benchmark looks reasonable for 32bpp. > The xvtest numbers seem overlay slow. > > Mark. > > On Fri, 12 Mar 2004, Robert Rozman wrote: > > > Hi, > > > > thanks for response. I will be happy to supply log but would kindly ask for > > guidance (which one (whole or just a part when playing something)) ? > > > > Thanks, > > > > Robert. > > > > - Original Message - > > From: "Thomas Winischhofer" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, March 11, 2004 11:36 PM > > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in > > mplayer - are these values sane ? > > > > > > > Robert Rozman wrote: > > > > Hi, > > > > > > > > I've upgraded to kde3.2 , upgrade X (and then downgrade again - now is > > > > 4.3.0-29 I think (Suse supplied Xfree), put new > > > > sisdrv in it) but now I can't get previous performance of system (video > > was > > > > played fluently, low cpu % from X). > > > > > > > > Now I have cpu between 20-30% on AVI and 40-50% on mpeg2 recorded from > > pvr > > > > 350 (but I guess this more depends on needed rescaling). > > > > > > > > I'm on Suse 9.0, so I guess mtrr is enabled by default and I don't now > > where > > > > to look further. > > > > > > What about the X log...? Or perhaps dmesg? > > > > > > Hm, some of SuSE's 4.3 versions suffered from the O_SYNC bug. I don't > > > use SuSe, so I don't know which versions that were. > > > > > > > I've tried: > > > > xvtest gives approx 230 FPS. > > > > x11perf shmoput500 gives 210/sec > > > > > > xvtest reports 2200 FPS on my 2+ Ghz P4, and around 400/sec (if either > > > only CRT1 or CRT2 is active, arount 700) for x11perf -shmput500. Since > > > you didn't consider attaching your X log worth the effort, I am out of > > > ideas. > > > > > > Thomas > > > > > > -- > > > Thomas Winischhofer > > > Vienna/Austria > > > thomas AT winischhofer DOT net http://www.winischhofer.net/ > > > twini AT xfree86 DOT org > > > ___ > > > XFree86 mailing list > > > [EMAIL PROTECTED] > > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > ___ > > XFree86 mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 XFree86.0.log Description: Binary data
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ?
Hi, thanks a lot for help. I'm not at the machine but do know that framebuffer is running probably cause Suse has boot splash routine integrated, so Vesa Fb is fired at the start when bootsplash screen is showed. I also get occasional warning in /var/log/messages about some problems with mtrr. I'll try 32Mb when I get home. BTW, is sisfb already in Suse supplied kernel or can it be added as module to working kernel or should I recompile from scratch ? Thanks, Robert. - Original Message - From: "Thomas Winischhofer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 15, 2004 1:12 AM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ? > Robert Rozman wrote: > > Hi, > > > > I'm sending files requested to give proper help. Like I said it seems like > > Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect > > that software scaling is going on, but don't know what to do to correct this > > ( I get CPU for X 40-50% and for mplayer or mythtv frontend about 20%). I > > have Asus pundit, with P4 2.4 G. > > > > I'll appreciate any help, since this is the only major problem left... > > > > I have: > > > > uname -a -> Linux pundit 2.4.21-144-default #1 Fri Nov 14 00:01:36 UTC 2003 > > i686 i686 i386 GNU/Linux > > > > cat /proc/mtrr > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > Is that from before or after starting X? > > Do you have a console framebuffer driver running? > > > (WW) SIS(0): Failed to set up write-combining range > (0xe800,0x400) > > The reason for your problem is that, for some reason, MTRR setup fails, > although it obviously is supported by your kernel. At the moment I > cannot think of a reason for this. > > Does this warning message go away if you change the amount of video RAM > to, say, 32MB in the BIOS setup? > > (BTW: Why do you set "forcecrt1" to "false" when it appears that you > neither have a TV, LCD or secondary VGA connected?) > > Thomas > > -- > Thomas Winischhofer > Vienna/Austria > thomas AT winischhofer DOT net http://www.winischhofer.net/ > twini AT xfree86 DOT org > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ?
Hi, I've tried reduceing memory to 32M in bios. That particular warning goes away, but high cpu problem persists. Short answers: > > cat /proc/mtrr > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > Is that from before or after starting X? > After starting X. > Do you have a console framebuffer driver running? > Probably is running from bootsplash feature integrated in Suse 9.0 > > (WW) SIS(0): Failed to set up write-combining range > (0xe800,0x400) > > The reason for your problem is that, for some reason, MTRR setup fails, > although it obviously is supported by your kernel. At the moment I > cannot think of a reason for this. > > Does this warning message go away if you change the amount of video RAM > to, say, 32MB in the BIOS setup? Yes, it goes away. > > (BTW: Why do you set "forcecrt1" to "false" when it appears that you > neither have a TV, LCD or secondary VGA connected?) There is note in example-config that one can override automatic detection with this one. I've commented it our, but no difference. I'm attaching new Xfree.log in case it helps. Thanks in advance for all help, Robert. - Original Message - From: "Thomas Winischhofer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 15, 2004 1:12 AM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ? > Robert Rozman wrote: > > Hi, > > > > I'm sending files requested to give proper help. Like I said it seems like > > Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect > > that software scaling is going on, but don't know what to do to correct this > > ( I get CPU for X 40-50% and for mplayer or mythtv frontend about 20%). I > > have Asus pundit, with P4 2.4 G. > > > > I'll appreciate any help, since this is the only major problem left... > > > > I have: > > > > uname -a -> Linux pundit 2.4.21-144-default #1 Fri Nov 14 00:01:36 UTC 2003 > > i686 i686 i386 GNU/Linux > > > > cat /proc/mtrr > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > Is that from before or after starting X? > > Do you have a console framebuffer driver running? > > > (WW) SIS(0): Failed to set up write-combining range > (0xe800,0x400) > > The reason for your problem is that, for some reason, MTRR setup fails, > although it obviously is supported by your kernel. At the moment I > cannot think of a reason for this. > > Does this warning message go away if you change the amount of video RAM > to, say, 32MB in the BIOS setup? > > (BTW: Why do you set "forcecrt1" to "false" when it appears that you > neither have a TV, LCD or secondary VGA connected?) > > Thomas > > -- > Thomas Winischhofer > Vienna/Austria > thomas AT winischhofer DOT net http://www.winischhofer.net/ > twini AT xfree86 DOT org > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 XFree86.0.log Description: Binary data
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ?
Hi, I'm still fighting with high cpu usage in xv extension whem playing media files (xine, mplayer, vlc) under Suse 9.0 , xfree 4.3.0-29 and sis 651 with latest sis drivers. All log outputs seems fine, just xvtest is at low 200 FPS and cpu is hig (30-50%) when playing video that does rescaling. Are there any utities to check what is going on in xv extension (xine-check reports all fine) ? What should I try to find solution ? I'm attaching xvinfo (all other relevant logs are attached to my previous posts) if anything suspicious is in there ? PS.: system performance was OKsome time ago, then did some upgrades and now it won't perform as needed - so I guess there is someking of settings problem... I kindly ask for any advice, help, cause this is too hard for me as newbie. Thanks for any help in advance, regards, Robert. - Original Message - From: "Robert Rozman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 16, 2004 10:39 AM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in mplayer - are these values sane ? > Hi, > > I've tried reduceing memory to 32M in bios. > > That particular warning goes away, but high cpu problem persists. > > Short answers: > > > cat /proc/mtrr > > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > > > Is that from before or after starting X? > > > After starting X. > > > Do you have a console framebuffer driver running? > > > > Probably is running from bootsplash feature integrated in Suse 9.0 > > > > (WW) SIS(0): Failed to set up write-combining range > > (0xe800,0x400) > > > > The reason for your problem is that, for some reason, MTRR setup fails, > > although it obviously is supported by your kernel. At the moment I > > cannot think of a reason for this. > > > > Does this warning message go away if you change the amount of video RAM > > to, say, 32MB in the BIOS setup? > > Yes, it goes away. > > > > > (BTW: Why do you set "forcecrt1" to "false" when it appears that you > > neither have a TV, LCD or secondary VGA connected?) > There is note in example-config that one can override automatic detection > with this one. I've commented it our, but no difference. > > I'm attaching new Xfree.log in case it helps. > > Thanks in advance for all help, > > Robert. > > > - Original Message - > From: "Thomas Winischhofer" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, March 15, 2004 1:12 AM > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in > mplayer - are these values sane ? > > > > Robert Rozman wrote: > > > Hi, > > > > > > I'm sending files requested to give proper help. Like I said it seems > like > > > Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I > suspect > > > that software scaling is going on, but don't know what to do to correct > this > > > ( I get CPU for X 40-50% and for mplayer or mythtv frontend about 20%). > I > > > have Asus pundit, with P4 2.4 G. > > > > > > I'll appreciate any help, since this is the only major problem left... > > > > > > I have: > > > > > > uname -a -> Linux pundit 2.4.21-144-default #1 Fri Nov 14 00:01:36 UTC > 2003 > > > i686 i686 i386 GNU/Linux > > > > > > cat /proc/mtrr > > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > > > Is that from before or after starting X? > > > > Do you have a console framebuffer driver running? > > > > > (WW) SIS(0): Failed to set up write-combining range > > (0xe800,0x400) > > > > The reason for your problem is that, for some reason, MTRR setup fails, > > although it obviously is supported by your kernel. At the moment I > > cannot think of a reason for this. > > > > Does this w
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ?
Hi, I have upgraded to xfree 4.4 (also latest sis_drv.o) and it doesn't help (at least in noticeable way) - cpu is still high, xvtest gives around 220 FPS I'm attaching log and kindly ask for any idea, help or advice how to solve this. Are there any tools to properly track this problem inside xv ? Thanks in advance, regards, Robert Rozman - Original Message - From: "Robert Rozman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 18, 2004 9:38 AM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ? > Hi, > > I'm still fighting with high cpu usage in xv extension whem playing media > files (xine, mplayer, vlc) under Suse 9.0 , xfree 4.3.0-29 and sis 651 with > latest sis drivers. > > All log outputs seems fine, just xvtest is at low 200 FPS and cpu is hig > (30-50%) when playing video that does rescaling. > > Are there any utities to check what is going on in xv extension (xine-check > reports all fine) ? > What should I try to find solution ? > > I'm attaching xvinfo (all other relevant logs are attached to my previous > posts) if anything suspicious is in there ? > > PS.: system performance was OKsome time ago, then did some upgrades and now > it won't perform as needed - so I guess there is someking of settings > problem... > > I kindly ask for any advice, help, cause this is too hard for me as newbie. > > Thanks for any help in advance, > > regards, > > Robert. > > - Original Message - > From: "Robert Rozman" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, March 16, 2004 10:39 AM > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in > mplayer - are these values sane ? > > > > Hi, > > > > I've tried reduceing memory to 32M in bios. > > > > That particular warning goes away, but high cpu problem persists. > > > > Short answers: > > > > cat /proc/mtrr > > > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, count=1 > > > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, count=1 > > > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, count=1 > > > > > > Is that from before or after starting X? > > > > > After starting X. > > > > > Do you have a console framebuffer driver running? > > > > > > > Probably is running from bootsplash feature integrated in Suse 9.0 > > > > > > (WW) SIS(0): Failed to set up write-combining range > > > (0xe800,0x400) > > > > > > The reason for your problem is that, for some reason, MTRR setup fails, > > > although it obviously is supported by your kernel. At the moment I > > > cannot think of a reason for this. > > > > > > Does this warning message go away if you change the amount of video RAM > > > to, say, 32MB in the BIOS setup? > > > > Yes, it goes away. > > > > > > > > (BTW: Why do you set "forcecrt1" to "false" when it appears that you > > > neither have a TV, LCD or secondary VGA connected?) > > There is note in example-config that one can override automatic detection > > with this one. I've commented it our, but no difference. > > > > I'm attaching new Xfree.log in case it helps. > > > > Thanks in advance for all help, > > > > Robert. > > > > > > - Original Message - > > From: "Thomas Winischhofer" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, March 15, 2004 1:12 AM > > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in > > mplayer - are these values sane ? > > > > > > > Robert Rozman wrote: > > > > Hi, > > > > > > > > I'm sending files requested to give proper help. Like I said it seems > > like > > > > Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I > > suspect > > > > that software scaling is going on, but don't know what to do to > correct > > this > > > > ( I get CPU for X 40-50% and for mplayer or mythtv frontend about > 20%). > > I > > > > have Asus pundit, with P4 2.4 G. > > > > > > > > I'll appreciate any help, since this is the only major problem left... > > > > > > > >
[XFree86] Asus Pundit and xv - what's your experience
Hi, I'm recently posting about my problems with Asus Pundit slow xv performance (Suse 9.0, P4 2.4G , xfree 4.4, sis 651 chipset - I get with xvtest around 200 FPS). Obviously I have no obvious options to tackle this problem (Thomas ran out of ideas), so would like to ask about your experiences, troubles, advices with this machine/chipset and xv ? I had working configuration, but then did security upgrades and it didn't work anymore (also after downgrade to previous system). There are some suspects to o_sync wulnerability of Suse systems, but how can I check that (cat proc/mtrr - anything else) ? In my case everything seems fine from logs, just xv performance is bad (x11perf gets better results 400/sec)... Regards, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ? - solved
Hi, I've solved my problems. I've searched faqs and found this one: a.. Xv is terribly slow and takes 30% CPU time or more. What's wrong? b.. As of 06/05/2003, there is a confirmed bug in the SuSE 8.2 XFree 4.3 packages and probably in XFree 4.3 packages of some other distributions as well. I know of at least Debian's 4.3.0pre1v1 containing this bug, too. This is no SiS driver bug and there is no real workaround available. However, on some systems, especially Athlon based ones, it helps setting the option XvUseMemcpy to false. Later versions of XFree86 will hopefully fix this problem rendering this option unneccessary. (Technical explanation: There is a problem with memory access in these versions of XFree86, rendering memcpy-operations to video RAM extremely slow. SiS hardware is not the only one affected, there were numerous complaints from users of other hardware, too. This bug is also known as the "O_SYNC bug". If you want to know more, search the archive of the xdevel mailing list for a thread named "Athlon related mystery".) Setting XvUseMemcpy to 0 solved my problems. It seems that this setting is still important (I have Suse 9.0, xfree 4.4 and still had problems). Thanks to Thomas for this info. Regards, Robert. ----- Original Message - From: "Robert Rozman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, March 19, 2004 11:58 PM Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ? > Hi, > > I have upgraded to xfree 4.4 (also latest sis_drv.o) and it doesn't help (at > least in noticeable way) - cpu is still high, xvtest gives around 220 FPS > > I'm attaching log and kindly ask for any idea, help or advice how to solve > this. Are there any tools to properly track this problem inside xv ? > > > Thanks in advance, > > regards, > > Robert Rozman > > - Original Message - > From: "Robert Rozman" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, March 18, 2004 9:38 AM > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage in xv ? > > > > Hi, > > > > I'm still fighting with high cpu usage in xv extension whem playing media > > files (xine, mplayer, vlc) under Suse 9.0 , xfree 4.3.0-29 and sis 651 > with > > latest sis drivers. > > > > All log outputs seems fine, just xvtest is at low 200 FPS and cpu is hig > > (30-50%) when playing video that does rescaling. > > > > Are there any utities to check what is going on in xv extension > (xine-check > > reports all fine) ? > > What should I try to find solution ? > > > > I'm attaching xvinfo (all other relevant logs are attached to my previous > > posts) if anything suspicious is in there ? > > > > PS.: system performance was OKsome time ago, then did some upgrades and > now > > it won't perform as needed - so I guess there is someking of settings > > problem... > > > > I kindly ask for any advice, help, cause this is too hard for me as > newbie. > > > > Thanks for any help in advance, > > > > regards, > > > > Robert. > > > > - Original Message - > > From: "Robert Rozman" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, March 16, 2004 10:39 AM > > Subject: Re: [XFree86] Asus Pundit (sis 651) : High CPU usage for X in > > mplayer - are these values sane ? > > > > > > > Hi, > > > > > > I've tried reduceing memory to 32M in bios. > > > > > > That particular warning goes away, but high cpu problem persists. > > > > > > Short answers: > > > > > cat /proc/mtrr > > > > > > reg00: base=0x ( 0MB), size= 512MB: write-back, count=1 > > > > > reg01: base=0x1c00 ( 448MB), size= 64MB: uncachable, count=1 > > > > > reg02: base=0xdc00 (3520MB), size= 64MB: write-combining, > count=1 > > > > > reg03: base=0xe800 (3712MB), size= 32MB: write-combining, > count=1 > > > > > reg04: base=0xe140 (3604MB), size= 4MB: write-combining, > count=1 > > > > > > > > Is that from before or after starting X? > > > > > > > After starting X. > > > > > > > Do you have a console framebuffer driver running? > > > > > > > > > > Probably is running from bootsplash feature integrated in Suse 9.0 > > > > > > > > (WW) SIS(0): Failed to set up write-combining range > > > > (0xe800,0x400) > > > > > > > > The reason for your
Re: [XFree86] Asus Pundit and xv - what's your experience
Thomas, I'd like to personally thank you for your effort. It seems like XvMemcpy setting was solution for me, althought it says in faq that this problem should be gone with newer versions of xfree (I have 4.4). I think that maybe stressing this setting little more would prevent someone else going on my route... Regards, Robert. - Original Message - From: "Thomas Winischhofer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 25, 2004 12:45 PM Subject: Re: [XFree86] Asus Pundit and xv - what's your experience > Robert Rozman wrote: > > Hi, > > > > I'm recently posting about my problems with Asus Pundit slow xv performance > > (Suse 9.0, P4 2.4G , xfree 4.4, sis 651 chipset - I get with xvtest around > > 200 FPS). > > > > Obviously I have no obvious options to tackle this problem (Thomas ran out > > of ideas), so would like to ask about your experiences, troubles, advices > > with this machine/chipset and xv ? I had working configuration, but then did > > security upgrades and it didn't work anymore (also after downgrade to > > previous system). There are some suspects to o_sync wulnerability of Suse > > systems, but how can I check that (cat proc/mtrr - anything else) ? > > > > In my case everything seems fine from logs, just xv performance is bad > > (x11perf gets better results 400/sec)... > > Strictly speaking, it is not "xv performance" but "memcpy()" performance. > > I have a pundit myself and I don't experience that problem (using > Debian's 4.3 packages) > > Thomas > > -- > Thomas Winischhofer > Vienna/Austria > thomas AT winischhofer DOT net*** http://www.winischhofer.net > twini AT xfree86 DOT org > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Spawning x based on sis-driver auto detection of available devices
Hi, I'd like to do following setup (I have Pundit with sis 651 chipset with two possible output devices): - if I have only first VGA device available I'd like to spawn certain X with Freevo app on this screen - if I have first + second device (TV out) that would spawn X with Freevo app on second device and normal X with desktop on primary VGA. I've read in sis driver manual that if it detects two devices with proper settings it'll spawn two independent X screens - I'd just like to specify what to spawn on each device in case of one and in other case of two devices. Is this possible and doable with XF86Config settings or some other utility ? Any examples ? Sorry for newbie language, I'm just getting started in this area. Thanks in advance, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xvesa Segmentation Violation
I am attempting to get Basic Linux 3 to run on an AST Ascentia 950N notebook. Every time I startx or run Xvesa I get a segmentation violation. Here are results of some tests; % startx results in a black screen and the following errors; _X11TransSocketINETConnect: Can't connect: errorno = 111 MENU: cannot open display swm: cannot open display , giving up % Xvesa -list modes VBE version 1.2 (Cirrus Logic GD-7543 VGA) DAC is switchable, controller is VGA compatible Total memory: 960 kilobytes % Xvesa -verbose Results in a black Screen and the following output Mode Requested 640x480x4 0x00012: 640x480x4 Planar (4 planes) (no linear frame buffer) Static Color bpp 4 depth 4 Mode Selected 640x480x4 Previous modes: VBE 0x3 BIOS 0x3 Enable Bios mode 0x12 Segmentation Fault. Anyone have any idea what might be happening and how I might resolve it? -- Rob "Never ascribe to malice that which can adequately be explained by stupidity." ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xvesa Help
I am investigating a very small Linux for old hardware and am running into some problems with Xvesa. Is there somewhere I can get more information on it? I haven't been able to find much information other than the man page. Is it still being actively being developed? -- Rob "Never ascribe to malice that which can adequately be explained by stupidity." ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] 2 screens on sis driver: Can I have different desktops in them (gnome,kde) ?
Hi, I'd like to better know possibilities that I have when using 2 screens (Xinerama mode off) - it says in Thomas' site that in this case: Quote: "Dual head" means that the driver will set up two different screens, eventually with different resolutions and different color depths, on CRT1 and CRT2. You get two independent X server sessions in (non-Xinerama) dual head mode, and you cannot move windows from one screen to the other. Can I have gnome on one screen and kde on other ? Where are settings for what server to run on first and what on second screen ? Can I run normal X desktop on one screen and media application that can run without window manager on another ? How to setup this ? Thanks in advance, regards, Robert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Related Symptom
A symptom that may be related to me screen resolution difficulties is that my screen flickers, despite frequent degaussing. HTH, Bob -- Distinctive, adj.: A different color or shape than our competitors. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] The Panels are Too Big For The Screen
Hi All. I hope someone can help. I am trying to install Red Hat 9. I have partitioned the drive and run a full install both to a formatted disk and also to one drive with Red Hat already on it (saying format). I take the machine chosen devices. Each time the letters on the logon panel overlay themselves and the tool bar is way too big. Once in the icons are too big and the panels are about 60% showing (ex. date panel you can't get to buttons). Maybe someone has an idea what I am doing wrong and/or how to fix it. Please help a frustrated newbie. Thanks. Bob Merry Christmas & Happy Holidays Bob Pelletier Rocky Hill, Connecticut ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xfree86 log error
Hello, After several months of good operation of my RedHat 9 Linux on my laptop (Aurox distribution), I am not able anymore to launch the X server . Please find attached the corresponding .log file. Any help will be very welcome. Regards, Gilles <> This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be assured to be secure or correct as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. XFree86.0.log Description: XFree86.0.log
[XFree86] Xfree86 log error
> Hello, > > After several months of good operation of my RedHat 9 Linux on my laptop > (Aurox distribution), I am not able anymore to launch the X server . Please > find attached the corresponding .log file. Any help will be very welcome. > > Regards, > > Gilles > > > <> > This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be assured to be secure or correct as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. XFree86.0.log Description: XFree86.0.log
[XFree86] Problem with displaying
After my computer boots, the screen and the keyboard flash off every few seconds, and then they flash back on. They are on while the computer is booting, but after that, I can't get them to stay on. Also, the startx (or xstart, whichever one it is) does not work, and I don't know why. This all started when the system gave me some error with graphical interface, and I ignored it. So now my computer with linux can't be used at all. How do I fix this? -Robert __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] bug report
Hi! HARDWARE - Sun Ultra 10 Sparc, 1 GB RAM, 2 x 9 GB HD - Sun Creator 3D graphic adapter - onboard ATI Rage 128 graphic adaper SOFTWARE Solaris 9, mostly actual patchlevel X86Free 4.5.0, compiled with gcc 3.2.2 Applications: fvwm 2.4, xterm, xconsole, some _remote_ X applications WHAT HAPPEND - X Server running with fvwm 2.4, using both graphic adapters (one on CRT, the other one on TFT) - starting Firefox on _remote_ host, with correct $DISPLAY Firefox coming up - going to internal website - CRASH of X server and all user processes (back to console login prompt) Regards, Robert Wirth --- Robert Wirth, Im Waldchen 7, D-66780 Rehlingen, Germany @phone: +49-6835-602374/607561 @mobile: +49-160-5986543 mail:[EMAIL PROTECTED] PGP! http://www.dfki.de/~wirth --- XFree86 Version 4.5.0 Release Date: 16 March 2005 X Protocol Version 11, Revision 0 Build Operating System: SunOS 5.9 Generic_118558-10 sun4u Build Date: 27 February 2006 Changelog Date: 17 March 2005 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Command line: X :0 -dpi 75 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 10 16:12:23 2006 (==) Using config file: "/etc/X11/XF86Config". (WW) INVALID IO ALLOCATION b: 0xff00 e: 0x correcting Detected FFB2+/vertical, Z-buffer, Single-buffered. No matching visual for __GLcontextMode with visual class = 3 (32772), nplanes = 24 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 24 No matching visual for __GLcontextMode with visual class = 0 (32775), nplanes = 24 Could not init font path element /opt/X11/lib/X11/fonts/CID/, removing from list! + uname -n HOST=isg-201 + export HOST + uname -s OS_TYPE=SunOS + export OS_TYPE + uname -r OS_VERSION=5.9 + export OS_VERSION WM=fvwm2 -f .fvwm2rc + export WM + echo Will use window manager: fvwm2 -f .fvwm2rc DISPLAY=isg-201:0.0 + export DISPLAY + echo Will set display: isg-201:0.0 + test SunOS 5.9 != SunOS 5.9 + exec fvwm2 -f .fvwm2rc -d isg-201:0.0 [FVWM.0][CursorStyle]: <> Cursor xlock.xpm not found [FVWM.1][CursorStyle]: <> Cursor xlock.xpm not found /bin/bash: titrax: command not found /bin/bash: xcb: command not found /bin/bash: titrax: command not found /bin/bash: xpostit: command not found /bin/bash: xcb: command not found audioplay: Fehler beim Öffnen/dev/audio: Zugriff verweigert /bin/bash: xpostit: command not found /bin/bash: coolmail: command not found audioplay: Fehler beim Öffnen/dev/audio: Zugriff verweigert Xlib: extension "RENDER" missing on display "unix:0.0". /bin/bash: coolmail: command not found xload: /dev/ksyms is not a 32-bit kernel namelist xload: cannot get name list from kernel Xlib: extension "RENDER" missing on display "unix:0.1". xload: /dev/ksyms is not a 32-bit kernel namelist xload: cannot get name list from kernel audioplay: Fehler beim Öffnen/dev/audio: Zugriff verweigert audioplay: Fehler beim Öffnen/dev/audio: Zugriff verweigert could not open any host key ssh_keysign: no reply key_sign failed could not open any host key ssh_keysign: no reply key_sign failed No plugin Plugger 2.2 (nostreams). Reverting to save-to-disk for type audio/wav. No plugin Plugger 2.2 (nostreams). Reverting to save-to-disk for type audio/x-wav. *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 10. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] X connection to unix:0.0 broken (explicit kill or server shutdown). X connection to unix:0.1 broken (explicit kill or server shutdown). X connection to unix:0.0 broken (explicit kill or server shutdown). xinit: connection to X server lost. waiting for X server to shut down xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.0" xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.0" xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.1" xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.0" xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.0" xterm: fatal IO error 32 (Abgebrochene Pipe) or KillClient on X server "unix:0.1" Killed
[XFree86] Building Xvfb on Sparc running Solaris 8
I tried building Xvfb on Solaris 8 running on sparc using nativ sun's compiler. I can successfully build the server without glx extensions. Problems start when I try to include glx extensions by adding this line to host.def : #define BuildGlxExt YES And even when eventually I manage to compile Xvfb executable glx extensions do not seem to be present as reported by glxinfo. Any help would be greately appreciated. thanks, Robert M Milaszewski ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Building Xvfb on Sparc running Solaris 8
Hi Marc, Thanks for your help. I got XFree86 v. 4.6.0 I set the following defines in host.def #define XVirtualFramebufferServer YES #define BuildXFree86OnSparcSunOS YES #define BuildGlxExt YES And I used Sun C 5.7 Sun C++ 5.7 compilers. I had problems compiling with this setup. I also tried compiling XFree86 v 4.6.0 using gnu's gcc v 2.95.2 but that did not work either. Can you give me more detailes on how you compiled Xvfb with glx extensions on Sparc with SunOS 5.8? thanks, Robert M Milaszewski Marc Aurele La France wrote: On Tue, 9 May 2006, Robert Milaszewski wrote: I tried building Xvfb on Solaris 8 running on sparc using nativ sun's compiler. I can successfully build the server without glx extensions. Problems start when I try to include glx extensions by adding this line to host.def : #define BuildGlxExt YES And even when eventually I manage to compile Xvfb executable glx extensions do not seem to be present as reported by glxinfo. Any help would be greately appreciated. I've verified that this works in XFree86 4.6.0, given its rework of extension support in the various X servers. But, for now, you will still need to build with a host.def containing ... #define BuildXFree86OnSparcSunOS YES Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +---+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Building Xvfb on Sparc running Solaris 8
I rebuild XFree86 v 4.6.0 using gcc v3.4.5 Xvfb built but I do not see glx extensions included in it. What am I doing wrong? thanks, RobertM Marc Aurele La France wrote: On Wed, 17 May 2006, Robert Milaszewski wrote: Marc Aurele La France wrote: On Tue, 9 May 2006, Robert Milaszewski wrote: I tried building Xvfb on Solaris 8 running on sparc using nativ sun's compiler. I can successfully build the server without glx extensions. Problems start when I try to include glx extensions by adding this line to host.def : #define BuildGlxExt YES And even when eventually I manage to compile Xvfb executable glx extensions do not seem to be present as reported by glxinfo. Any help would be greately appreciated. I've verified that this works in XFree86 4.6.0, given its rework of extension support in the various X servers. But, for now, you will still need to build with a host.def containing ... #define BuildXFree86OnSparcSunOS YES Thanks for your help. I got XFree86 v. 4.6.0 I set the following defines in host.def #define XVirtualFramebufferServer YES #define BuildXFree86OnSparcSunOS YES #define BuildGlxExt YES And I used Sun C 5.7 Sun C++ 5.7 compilers. I had problems compiling with this setup. I also tried compiling XFree86 v 4.6.0 using gnu's gcc v 2.95.2 but that did not work either. Can you give me more detailes on how you compiled Xvfb with glx extensions on Sparc with SunOS 5.8? I'm actually using Solaris 7, but that shouldn't matter too much. GCC 2.95.2 is quite old. I recommend 3.2 or newer. I'm currently using 4.0.1. Your host.def settings above should give you something that compiles & runs right out of the box. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +---+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Building Xvfb on Sparc running Solaris 8
security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy This is output of glxinfo: glxinfo -display localhost:100 name of display: localhost:100.0 Error: couldn't find RGB GLX visual visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat -- 0x27 8 pc 0 8 0 c y . 0 0 0 0 0 16 0 0 0 0 0 0 0 None 0x28 8 gs 0 8 0 c y . 0 0 0 0 0 16 0 0 0 0 0 0 0 None 0x29 8 sc 0 8 0 c y . 3 3 2 0 0 16 0 0 0 0 0 0 0 None 0x2a 8 tc 0 8 0 c y . 3 3 2 0 0 16 0 0 0 0 0 0 0 None 0x2b 8 tc 0 8 0 c y . 3 3 2 0 0 16 8 16 16 16 0 0 0 None 0x2c 8 tc 0 16 0 c y . 3 3 2 8 0 16 8 16 16 16 16 0 0 None 0x2d 8 tc 0 16 0 c . . 3 3 2 8 0 16 8 16 16 16 16 0 0 None 0x2e 8 dc 0 8 0 c y . 3 3 2 0 0 16 0 0 0 0 0 0 0 None 0x2f 8 dc 0 8 0 c y . 3 3 2 0 0 16 8 16 16 16 0 0 0 None 0x30 8 dc 0 16 0 c y . 3 3 2 8 0 16 8 16 16 16 16 0 0 None 0x31 8 dc 0 16 0 c . . 3 3 2 8 0 16 8 16 16 16 16 0 0 None 0x32 8 sg 0 8 0 c y . 0 0 0 0 0 16 0 0 0 0 0 0 0 None _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root zeppo-515: error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy Thanks, RobertM Marc Aurele La France wrote: On Fri, 26 May 2006, Robert Milaszewski wrote: Marc Aurele La France wrote: On Wed, 17 May 2006, Robert Milaszewski wrote: Marc Aurele La France wrote: On Tue, 9 May 2006, Robert Milaszewski wrote: I tried building Xvfb on Solaris 8 running on sparc using nativ sun's compiler. I can successfully build the server without glx extensions. Problems start when I try to include glx extensions by adding this line to host.def : #define BuildGlxExt YES And even when eventually I manage to compile Xvfb executable glx extensions do not seem to be present as reported by glxinfo. I've verified that this works in XFree86 4.6.0, given its rework of extension support in the various X servers. But, for now, you will still need to build with a host.def containing ... #define BuildXFree86OnSparcSunOS YES Thanks for your help. I got XFree86 v. 4.6.0 I set the following defines in host.def #define XVirtualFramebufferServer YES #define BuildXFree86OnSparcSunOS YES #define BuildGlxExt YES And I used Sun C 5.7 Sun C++ 5.7 compilers. I had problems compiling with this setup. I also tried compiling XFree86 v 4.6.0 using gnu's gcc v 2.95.2 but that did not work either. Can you give me more detailes on how you compiled Xvfb with glx extensions on Sparc with SunOS 5.8? I'm actually using Solaris 7, but that shouldn't matter too much. GCC 2.95.2 is quite old. I recommend 3.2 or newer. I'm currently using 4.0.1. Your host.def settings above should give you something that compiles & runs right out of the box. I rebuild XFree86 v 4.6.0 using gcc v3.4.5 Xvfb built but I do not see glx extensions included in it. What am I doing wrong? I'm not sure. Please post (or send me privately) the output from xdpyinfo and glxinfo run against the display created by your most recent build of Xvfb. Thanks. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +---+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Building Xvfb on Sparc running Solaris 8
I tried 16 and 24 bit depth and still I do not see glx extensions. RobertM Marc Aurele La France wrote: On Fri, 26 May 2006, Robert Milaszewski wrote: Here is command I use to start the server: Xvfb :100 -pn -co /usr/X/lib/X11/rgb -fp /usr/X/lib/X11/fonts/misc/,/usr/X/lib/X11/fonts/Speedo/,/usr/X/lib/X11/fonts/Type1/,/usr/X/lib/X11/fonts/75dpi/,/usr/X/lib/X11/fonts/100dpi/ -fbdir /tmp & _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root _XSERVTransNAMEDOpenServer: Can't open /tmp/.X11-pipe/X100 _XSERVTransOpen: transport open failed for named/zeppo:100 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for named error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy This is output of xdpyinfo : [elided] This is output of glxinfo: [elided] I think you need a depth higher than 8, i.e. add "-screen 0 1280x1024x16" to the above Xvfb command line. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +---+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Installing XFree86 v 4.6.0
Hello, Is it possible to install X in directory other than /usr/X11R6 without any modifications to the existing X installation so that I have complete alternative X environment that I can use for testing of X applications using Xvfb? thanks, Robert M Milaszewski ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86 and Apple Studio Display 17" LCD DVI
I had previously posted a note that I could not get XFree86 to work with the Apple Studio Display 17" LCD via DVI port on a Radeon 7500 card. The Apple monitor remained blank. I knew the hardware was ok because I could drive a (borrowed) Sony monitor. Note that this hardware combination worked under Windows XP with no difficulty. I was never able to resolve this despite 2 weeks researching, modifying configs, trying CVS drivers, and very generous help from several people working on XFree86. Finally, based on other suggestions, I bought a Nvidia card (a lot cheaper than getting a new monitor ). Out of the box with the standard XFree86 driver ("nv") the screen lit up (first time that had happened with XFree86) but showed only hash - no image. As soon as I installed the Nvidia driver ("nvidia" downloaded from their site), the monitor worked gloriously. I post this for the record and with the hope it will help someone else in the future. But I think the experience also makes another point -- the long-term success of Linux depends in part on active support from the commercial hardware sector. And I for one, think the Linux community might be more explicit in their support of those companies that are responsive. I built this homebrew PC explicitly to run Linux -- but in all my readings of various forums there was no clear statement that Nvidia cards were more likely to work with unusual monitor situations than Radeon cards. I bought the Radeon card largely by chance. Next time I see a "what hardware is best with Linux" post, my response will be to explicitly recommend Nvidia. Another obvious -- more important -- example of the importance of corporate support (support, not ownership) is IBM's very clear, forceful response to the OSC "lawsuit" (I may have the corporate ID wrong -- apologies). I understand that IBM is motivated by "enlightened self-interest" here -- but such insight is going to be key to the success of the open-source movement. Again, many thanks to all those in the Linux community who responded to my posts and offered suggestions. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] gnome-terminal text selection enhancement
Using the mouse, I found reverse text selection (left motion) a problem - what I consider "correct" is to start a forward selection in the right half of the char cell, and a reverse selection in the left half of the char cell. This is how mozilla and gedit work, and I think irix terminal too. Tested on multi-gnome-terminal-1.4.1 and appears to carry forward to zvtterm.c 1.161 in CVS. in zvtterm.c, zvt_term_button_press, zvt_term_button_release, zvt_term_motion_notify - add term->charwidth/2 in the numerator where converting x pixel position to x character position - this shift selection to right by 1/2 char width x = ( x - ( widget->style->klass->xthickness + PADDING ) + term->charwidth/2 ) / term->charwidth; then, get rid of the call to vt_fix_selection in zvt_term_motion_notify because it screws up selection and it seems to be unnecessary during motion ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] chipset unknown
Hi, I'm using a Toshiba Satellite 2595XDVD laptop. When I run SuperProbe (output below) it sayes to report the unknown chipset. I've been using this laptop for many years, through many xfree86 upgrades and probably should have reported this a long time ago. The only problem I have is switching from Win/NT to Linuxi with just a reboot. Something does not get reset and all colors are extreamly washed out. If I power off and then boot linux - no problem. Bob Kingman === SuperProbe Version 2.23 (2000 November 28) (c) Copyright 1993,1994 by David Wexelblat <[EMAIL PROTECTED]> (c) Copyright 1994-1998 by The XFree86 Project, Inc This work is derived from the 'vgadoc2.zip' and 'vgadoc3.zip' documentation packages produced by Finn Thoegersen, and released with all appropriate permissions having been obtained. Additional information obtained from 'Programmer's Guide to the EGA and VGA, 2nd ed', by Richard Ferraro, and from manufacturer's data books Bug reports are welcome, and should be sent to [EMAIL PROTECTED] In particular, reports of chipsets that this program fails to correctly detect are appreciated. Before submitting a report, please make sure that you have the latest version of SuperProbe (see http://www.xfree86.org/FAQ). WARNING - THIS SOFTWARE COULD HANG YOUR MACHINE. READ THE SuperProbe.1 MANUAL PAGE BEFORE RUNNING THIS PROGRAM. INTERRUPT WITHIN FIVE SECONDS TO ABORT! First video: Super-VGA Chipset: Trident (chipset unknown) (PCI Probed) Signature data: 95251023 (please report) Memory: 2048 Kbytes RAMDAC: Sierra SC1148{2,3,4} 15-bit or SC1148{5,7,9} 15/16-bit HiColor (with 6-bit wide lookup tables (or in 6-bit mode)) -- +-+ | Pride: Every job is a self portrait of the person who did it. | |Autograph your work with excellence. | +-----+ | Robert A Kingman Network Executive Software 612-694-4314 | | [EMAIL PROTECTED] 6420 Sycamore Lane N. 888-604-5573 | | [EMAIL PROTECTED]Maple Grove, MN 55369Semper Fi | +-+ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] modeline info source for projector
hi - i have a vidikron vision one projector and want to drive it at 1920x1080 from an ati radeon video card under rhel ws 3 & xfree86. the projector manual doesn't provide all the info that needs to go in a modeline in the xconfig file. where can i get the info? thanks - bob ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86