Re: [XFree86] Fwd: XFree86 ATI Radeon crash
From your xfree 85 log I can see that your on 4.2.1.1, so you need to uipgrade to xfree86 4.3.0 or above for Radeon 9000 support. Bernt Hansen wrote: I just purchased a new Toshiba Tecra S1 laptop with an ATI Radeon 9000 video card. XFree86 fails to load when I run 'xf86cfg'. I get the attached errors in the XFree86.0.log file: Thanks, Bernt This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.1.1 (Debian 4.2.1-9 20030630175526 [EMAIL PROTECTED]) / X Window System (protocol Version 11, revision 0, vendor release 6600) ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] SiS 6326 VS XFree 4.2.1...
You need 4.3.0. The SiS 6326 is not supported in 4.2.1 Klode wrote: Why is not possible to use XF86 with my SiS 6326 AGP 8Mb Video Card? I've Mandrake 9.0 installed; after the installation,I have an error with my graphical interface. Then I configure xserver, then I say that the video card and the pp monitor are correct, but when I test the configuration, I receive this error: XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 5 09:33:51 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |--Screen "screen1" (0) (**) | |--Monitor "monitor1" (**) | |--Device "device1" (EE) No core pointer device specified (EE) Unable to determine the screen layout (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED]. I also have attached my config file... Sorry about my possible spamming... but I Love Linux! K.L.0.d.3.
Re: [XFree86] Is this working?
It might be one of the Unsupported Chipsets in 4.2.0 / .1, have you tried the older 3.3.6 Server ? S3 3.3.6: Support (accelerated) for the S3 911, 924, 801, 805, 928, 864, 868, 964, 968, Trio32, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the XF86_S3 server and the XF86_SVGA server with the s3_svga driver. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+ is provided by the XF86_S3V server. Support (accelerated) for the ViRGE chipsets, as well as the Trio3D and Trio3D/2X, is provided by the XF86_SVGA server with the s3v driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, and Savage2000, is provided by the XF86_SVGA server with the s3_savage driver on some OSes (Linux, *BSD). 4.2.1: Support (accelerated) for the 964 (revisions 0 and 1), 968, Trio32, Trio64, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the "s3" driver (however, only models using the IBM RGB 524, Texas Instruments 3025, or an internal TrioDAC RAMDAC chip are supported). Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and Trio3D/2X is provided by the "s3virge" driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, Savage2000, and SuperSavage, is provided by the "savage" driver. Support for the other S3 chipsets has not yet been ported. Summary: All hardware supported in 3.3.6 is also supported in 4.2.1 except for the 911, 924, 801, 805, 928, 864, and 868, and versions of the 964 and 968 that do not use the RAMDAC chips listed above. The SuperSavage chipset is supported only in 4.2.1. WADE SCHOFIELD wrote: Hello, I am attempting to run X on my RH 7.3 installation with no luck. What is strange is that the same hardware ran X under 7.2 flawlessly! Also, I used the graphical install and went through the X setup with no errors. I have tried everything I know even copying the old XF86Config from the 7.2 installation with no success. I am running an old system (PII 166) with an S3 video card. Any assistance would be greatly appreciated. Sincerely, Wade Schofield XFree86.0.log: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 20 20:34:36 2003 (==) Using config file: "/etc/X11/XF86Config" Parse warning on line 102 of section Keyboard in file /etc/X11/XF86Config Ignoring obsolete keyword "LeftAlt". Parse error on line 102 of section Keyboard in file /etc/X11/XF86Config "Meta" is not a valid keyword in this section. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED]. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 -Original Message- From: Simon Westerby [mailto:[EMAIL PROTECTED]] Sent: Monday, January 27, 2003 1:32 PM To: [EMAIL PROTECTED] Subject: Re: [XFree86] Is this working? You need 4.2.99.4 as the INtel 845 chipset is not supported in 4.2.1 WADE SCHOFIELD wrote: I've sent in a couple of help requests and haven't received a reply or seen my message so up in list. Would someone please reply to this so I know it's working! Thanks, ws -Original Message- From: vishnu devineni [mailto:[EMAIL PROTECTED]] Sent: Monday, January 27, 2003 2:25 AM To: [EMAIL PROTECTED] Subject: [XFree86] startx not running hi my computer has intel D845GLLY motherboard with built in graphics card. log file is attached Missed your favourite TV serial last night? Try the new, Yahoo! TV. visit http://in.tv.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/
Re: [XFree86] Touch Screen support
Matthew Allum wrote: on Mon, Jan 27, 2003 at 03:32:54PM +0100, Pablo Fern?ndez wrote: Another more general question I have is that I have to connect PDAs to a desktop computer, I want the PDAs to run Linux too. Does anyone knows how I could achieve this? Sharp Zaurus or COmpaq Ipaq ? Have you seen http://handhelds.org ? -- Matthew ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] HELP: StartX failure
download the following files from ftp://ftp.xfree86.org/pub/XFree86/snapshots/4.2.99.4/binaries/Linux-ix86-glibc22/ then, as root, run sh ./Xinstall.sh you should be able to use the default answer to all the questions you are asked during the install (jusr press return) Install README RELNOTES Xbin.tgz Xdoc.tgz Xetc.tgz Xf100.tgz Xfcyr.tgz Xfenc.tgz Xfnts.tgz Xfscl.tgz Xfsrv.tgz Xhtml.tgz Xinstall.sh Xjdoc.tgz Xlib.tgz Xman.tgz Xmod.tgz Xnest.tgz Xprog.tgz Xprt.tgz Xps.tgz Xvar.tgz Xvfb.tgz Xxserv.tgz extract K K wrote: Simon, I am a newbie on Linux. Could you tell me how to upgrade or simply a Linux distribution using the XF86. KK - Original Message - From: SimonWesterby To: [EMAIL PROTECTED] Sent: Sunday, January 26, 2003 11:59AM Subject: Re: [XFree86] HELP: StartXfailure Yes, you need a later version of XF86 ... http://www.mail-archive.com/xfree86@xfree86.org/msg00290.html Oryou could try it with the X Vesa drivers, but you would be limited in yourscreen resolution Try 4.2.99.4 (availablefrom ftp://ftp.xfree86.org/pub/XFree86/snapshots/4.2.99.4/binaries/Linux-ix86-glibc22/ ) KK wrote: I am using Intel D845GLAD motherboard to bring up X-Window using 'startx' but failed with the following error. Please help and advise how to overcome it. TIA.
[XFree86] 4.3.0 release date ? AND a Font problem too
Does anyone know if there's a proposed release date for 4.3.0 ? I'm currently using 4.2.99.4, but it stops KDM working (on My SUSe 8.0) and I don't think those nice people @ SUSe are Compiling versions of X unless its a Major release. Alos, after installing 4.2.99.3/4 some of my fonts seemt om be a bit messed up, Arial, Times New Roman are a couple. When you type lowecase abcdefghijklm it comes out as ABCDEFGHIJKLM and when uppercase characters it comes out as symbols A becomes ! Very odd, not all fonts are affected! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] KDM No longer works after upgrade to 4.2.99.3 / .4
Hi I've just installed xf86 4.2.99.4 so I can have My Radeon 9000 working modes other than the VESA ones, and after installing xf86 (..binaries using Xinstall..) and now kdm no longer works (kde 3.05a) ... xdm works, so at least I can use X, and it uses kde as the desktop... I'm just stumped why kdm doesn't work. If I run kdm as root, it just returns to the bash prompt... no errors :( Any ideas ? (my sytem is SUSe 8.0 ..) ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] HELP: StartX failure
Your Motherboard has the Intel 845 chipset, and XF86 (4.2.0) is identifying it as Intel 815, and is failing to find a device... I guess the 845 is not supported in such an old version of XF86... Have yoou tried any of the newer (4.2.99.x) versions of XF86? K K wrote: I am using Intel D845GLAD motherboard to bring up X-Window using 'startx' but failed with the following error. Please help and advise how to overcome it. TIA.
Re: [XFree86] HELP: StartX failure
Yes, you need a later version of XF86 ... http://www.mail-archive.com/xfree86@xfree86.org/msg00290.html Or you could try it with the X Vesa drivers, but you would be limited in your screen resolution Try 4.2.99.4 (available from ftp://ftp.xfree86.org/pub/XFree86/snapshots/4.2.99.4/binaries/Linux-ix86-glibc22/ ) K K wrote: I am using Intel D845GLAD motherboard to bring up X-Window using 'startx' but failed with the following error. Please help and advise how to overcome it. TIA.