Re: [XFree86] plantage du xwindow
If I understand you correctly you need to remove the lock file. David - Original Message - From: sylvain [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, February 18, 2003 2:02 AM Subject: [XFree86] plantage du xwindow J'ai trouvé un bug. Quand je passe en mode texte (control+alt+F1 par exemple), Xfree86 plante après quelques secondes. Et je ne peu plus redémarrer startx. Help! Sylvain ([EMAIL PROTECTED]) ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] [XFree86(TM) Bug Report] NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h
I am also having trouble trying to GET Xserver running with this PCI card on a Compaq Proliant 5500 and am reaching a point of despair!!! Could someone on the development team please advise David - Original Message - From: BSD Baby [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, February 12, 2003 11:27 PM Subject: [XFree86] [XFree86(TM) Bug Report] NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h Regarding: NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h Email: [EMAIL PROTECTED] -- -- XFree86 Version: 4.2.1 OS: FreeBSD 4.7-RELEASE i386 Area: Xserver Server: XFree86 (The XFree86 4.x server) Video Card: pci bus 0x cardnum 0x0c function 0x00: vendor 0x10de device 0x002d NVidia Riva TNT2 M64 STATUS0x02b0 COMMAND 0x0007 CLASS 0x03 0x00 0x00 REVISION 0x15 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE0 0xde00 addr 0xde00 MEM BASE1 0xdc08 addr 0xdc00 MEM PREFETCHABLE MAX_LAT 0x01 MIN_GNT 0x05 INT_PIN 0x01 INT_LINE 0x0a Description: XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: FreeBSD 4.7-RELEASE i386 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Feb 12 23:16:43 2003 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on freebsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x0cf8, mode1Res1 = 0x0cf8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0740 card 1039,0740 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:0a:0: chip 13f6,0111 card 1297,f440 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 8086,1229 card 8086,0001 rev 02 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 10de,002d card , rev 15 class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 11c1,5811 card 1297,f024 rev 04 class 0c,00,10 hdr 00 (II) PCI: 01:00:0: chip 1039,6325 card 1039,6325 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x04 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0xd000 - 0xd0ff (0x100) IX[B] [1] -1 0xd400 - 0xd4ff (0x100) IX[B] [2] -1 0xd800 - 0xd8ff (0x100) IX[B] [3] -1 0xdc00 - 0xdcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xe010 - 0xe01f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xd000 - 0xd7ff (0x800) MX[B] (II)
[XFree86] NVidia PCI TNT2 M64 HELP PLEASE RESPOND
Hi all Does anyone please know anything about the problems with XFree86 and this card? Some feedback would be appreciated . David - Original Message - From: vizion communication [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Thursday, February 13, 2003 7:13 AM Subject: Re: [XFree86] [XFree86(TM) Bug Report] NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h I am also having trouble trying to GET Xserver running with this PCI card on a Compaq Proliant 5500 and am reaching a point of despair!!! Could someone on the development team please advise David - Original Message - From: BSD Baby [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, February 12, 2003 11:27 PM Subject: [XFree86] [XFree86(TM) Bug Report] NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h Regarding: NVidia Riva TNT2 M64 - appropriate data has not been added to xf86PciInfo.h Email: [EMAIL PROTECTED] -- -- XFree86 Version: 4.2.1 OS: FreeBSD 4.7-RELEASE i386 Area: Xserver Server: XFree86 (The XFree86 4.x server) Video Card: pci bus 0x cardnum 0x0c function 0x00: vendor 0x10de device 0x002d NVidia Riva TNT2 M64 STATUS0x02b0 COMMAND 0x0007 CLASS 0x03 0x00 0x00 REVISION 0x15 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE0 0xde00 addr 0xde00 MEM BASE1 0xdc08 addr 0xdc00 MEM PREFETCHABLE MAX_LAT 0x01 MIN_GNT 0x05 INT_PIN 0x01 INT_LINE 0x0a Description: XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: FreeBSD 4.7-RELEASE i386 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Feb 12 23:16:43 2003 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on freebsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x0cf8, mode1Res1 = 0x0cf8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0740 card 1039,0740 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:0a:0: chip 13f6,0111 card 1297,f440 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 8086,1229 card 8086,0001 rev 02 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 10de,002d card , rev 15 class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 11c1,5811 card 1297,f024 rev 04 class 0c,00,10 hdr 00 (II) PCI: 01:00:0: chip 1039,6325 card 1039,6325 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x
Re: [XFree86] Fatal Server Error
Is the file there? Are the pemissions OK? David - Original Message - From: Hixon, Geoff [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, February 12, 2003 8:50 AM Subject: [XFree86] Fatal Server Error I am running Vector distribution and I am getting the following error. Could not init font path element unix:/7100, removing from list! Fatal Server Error: could not open default font 'fixed' I tried the resolution that another post had suggested but did not work, here is that fix. chmod a+r /usr/X11R6/lib/X11/fonts/misc/fonts.alias service xfs restart The first line goes through no problem, but when I attempt the service xfs restart I get: /sbin/service: line 81: /etc/rc.d/init.d/xfs: No such file or directory. When I reboot the machine and try startx I get the same error. Anyone have any suggestions. Thanks Geoff Hixon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FreeBsd - Riva TNT2M64 - Compaq Proliant 5500
Hi I am having Fatal Server Error - No screens found problem on this system. The log file has the following relevant entries: (II) Primary device is : PCI 00:02:0 (WW) NV: No matching device section for instance (Bus ID PCI:0:2:0) found (EE) No devices detected It would seem the problem is down to the difference between 02 and 2!! How can this be best dealt with? Thanks David Southwell ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FATAL Error advice:
Hi I am having Fatal Server Error - No screens found problem on this system. FreeBSD 4.7 Compaq Proliant 5500 Graphics card: Riva TNT 2 M64 32MB PCI Version Card in Primary PCI Bus The log file has the following relevant entries: (II) Primary device is : PCI 00:02:0 (WW) NV: No matching device section for instance (Bus ID PCI:0:2:0) found (EE) No devices detected It would seem the problem is down to the difference between 02 and 2!! How can this be best dealt with? Thanks for any help David Southwell ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [Newbie]can't get 1280x1024 resolution to work
ok I have an nvidea chip integrated onmy motherboard MSI KN7420 Pro. I just could not get X windows working on FreeBSD 4.5. In the end I gave up for the time being and have put in an old Matrox millenium card. MSI's distributors in S Ca.. have not been much help - and do not seem to care very much either. So we will steer clear of MSI motherboards in the future. David - Original Message - From: William Hanlon [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, July 05, 2002 11:35 AM Subject: [Newbie]can't get 1280x1024 resolution to work Hi, I have a KDS-190p monitor and NVIDIA TnT2 M64 32MB AGP video card and I am running XFree86 4.2.0 on RedHat Linux 7.3. When I tried installing linux the only screen resolutions that were clear were those for 1024x768 and below, but the monitor supports up to 1600x1200. I eventually tried editing the XF86Config-4 file and added two modes for 1280x1024: # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline 1280x1024 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync # 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline 1280x1024 1351280 1312 1456 1712 1024 1027 1030 1064 +HSync +VSync Both of these modes are listed in the manual as factory preset modes and so I thought would be safe to try. The first mode caused a fuzzy display, but the second seems to work better. I would like to try another set of timings for the 1280x1024 mode but there aren't any more listed in my manual and I am afraid I will damage the monitor. Has anoyone has this problem with the KDS VS0-190p monitor or does anyone have any suggestions on safe values I can use to adjust the timing of the monitor to get a clear display? Thanks, Bill ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
Re: [Newbie]Any ATI support available?
I have found support for Ati to be not up to my expectations on all platforms. My 2 cents worth david - Original Message - From: Mirek Vitek To: [EMAIL PROTECTED] Sent: Wednesday, June 26, 2002 1:14 PM Subject: [Newbie]Any ATI support available? Hi, I was wondering how extensive is support for the Ati video boards, because I have heard Linux systems such as Debian (which I have) do not handle these kind of cards very well.Are there any drivers or downloads available on the XFree86.Org website to solve problems with the ati boards. I appreciate any suggestions. Thanks
Re: [Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard
Further info - I added an old Matrox millenium II card and had no problems configuring X - so it dioe seem that the proble is using the on board video. I also appear to hae problems with the onboard video sound. Does anyone have any ideas? David - Original Message - From: vizion communication [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 21, 2002 3:52 PM Subject: Re: [Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard PS I should have added that I am using the on board video David - Original Message - From: vizion communication [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 21, 2002 3:09 PM Subject: [Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard Hi I am having difficulty with persuading XFree to configure on this system from THE out of the Box freeBSD 4..5 CD configuration tool. Everything goes fine until the configuration attempts to start the server. The graphical interface for configuraing mouse/keyboard/card etc works fine. An attempt to start the server results in a a screen scattered with artifacts and/or two blue colored horizontal bands across the monitor. The system appears to crash. All advice gratefully appreciated. David ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
[Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard
Hi I am having difficulty with persuading XFree to configure on this system from THE out of the Box freeBSD 4..5 CD configuration tool. Everything goes fine until the configuration attempts to start the server. The graphical interface for configuraing mouse/keyboard/card etc works fine. An attempt to start the server results in a a screen scattered with artifacts and/or two blue colored horizontal bands across the monitor. The system appears to crash. All advice gratefully appreciated. David ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
Re: [Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard
PS I should have added that I am using the on board video David - Original Message - From: vizion communication [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 21, 2002 3:09 PM Subject: [Newbie]Free BSD XFree Configuration on K7N420 Pro MotherBoard Hi I am having difficulty with persuading XFree to configure on this system from THE out of the Box freeBSD 4..5 CD configuration tool. Everything goes fine until the configuration attempts to start the server. The graphical interface for configuraing mouse/keyboard/card etc works fine. An attempt to start the server results in a a screen scattered with artifacts and/or two blue colored horizontal bands across the monitor. The system appears to crash. All advice gratefully appreciated. David ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie ___ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie