On 28 May 2003, Anders Joergensen wrote:
Hi,
I have some problems getting my X to show 1920x1200, which is the
primary display mode for my 24 LCD display.
I'm running
XFree86 Version 4.3.0 on a Redhat 9
According to XFree86.0.log my video hardware is Radeon 7500, which is
correct, but when it says
(II) RADEON(0): Not using mode 1920x1200 (no mode of this name)
(II) RADEON(0): Not using mode 1920x1080 (no mode of this name)
Does that mean that the video card doesn't support 1920x1200 and
1920x1080?
I think it means that these modes are not built into the xserver. Try
generating a custom modeline with the resolutions you're aiming for (or
something smaller with the same aspect ratio if you can't go that high)
and inserting that into the monitor section of /etc/X11/XF86Config-4.
Videogen is one example of a tool for making modelines.
If you get something that almost works (but there is some distortion in
the screen or something), then use xvidtune to adjust the screen and
fine tune the mode (don't forget to print out the corrected modeline
created by xvidtune and using that to replace the one you had generated
earlier).
Jesse
./Anders
--
Anders Jacob Joergensen
Nokia Businuess Infrastructure
Frederikskaj, 1790 Cph. V
Phone: +45 33294586, +45 20918776
Brought to you by the character ':', the letters 'w' and 'q'. Enjoy!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86