[XFree86] fatal error LinuxInit: cannot open tty0
Dear all, I'm a newbie in this field. I am trying to run KDrive (Xfbdev), which is cross compiled from XFree86 revision 4.6.0, on an embedded system; however, an fatal error occurred. Fatal Error LinuxInit: cannot open tty0 (No such file or directory). It seems KDrive users a virtual terminal to start its operations. Actually, there's no virtual terminal at all in an embedded system. How could I avoid using a virtual terminal to start KDrive? If not, how to add an tty0 device to the system? I also hacked the source code, so it did not call the LinuxInit function, which tried to open tty0, and the error did not occurred, but it said no screens found. Would someone help me? Thanks! Regards, Kevin ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal error(XFree-4.5.0
"Cannot run in framebuffer mode, specify busIDs for all franebuffer devices"!! Any suggestions[EMAIL PROTECTED]
[XFree86] fatal error
Dear sir, How to create this proble in my linux system I am newr for this work please suggest me... when i wright this command so display fatal error #startx Fatal server error: Server is already active for display 1 If this server is no longer running, remove /tmp/.X1-lock and start again. When reporting a problem related to a server crash, please send the full server output, not just the last messages. __ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/ ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal error - no screen found
Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error fatal server error no screens found and I examined the log file, and found out that (EE) No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954
RE: [XFree86] fatal error - no screen found
You need to use a more recent version of XFree86. Upgrade to at least version 4.3 and preferably 4.4. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lawrence Ha Sent: Tuesday, June 01, 2004 2:32 AM To: [EMAIL PROTECTED] Subject: [XFree86] fatal error - no screen found Importance: High Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error 'fatal server error - no screens found' and I examined the log file, and found out that (EE) - No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal error - no screen found
no screens found can happen for a number of reasons. The most common is that your video card is too new to be recognized by your version of XFree86. The server you are running is years old, so that is not suprising. XFree86 4.4 is the current version. Mark. On Tue, 1 Jun 2004, Lawrence Ha wrote: Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error 'fatal server error - no screens found' and I examined the log file, and found out that (EE) - No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal error
Raphael Peters wrote: after installing the Nvidia-drivers NVIDIA_kernel-1.0-4191.src.rpm and NVIDIA_GLX-1.0-4191.i386.rpm I couldn´t get back to my X11 desktop. I got an error-message which I didn´t understand, ´cause I´m totally new to Linux. (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta, (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset GeForce4 Ti 4200 found ... (II) [GLX]: Initializing GLX extension *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. The problem is that your XFree86 configuration (likely /etc/X11/XF86Config) is using the XFree86 open-source driver 'nv', whereas you have installed the nVidia closed-source driver 'nvidia'. This causes a conflict with the OpenGL extension (GLX). So change 'Driver nv' to 'Driver nvidia' in the Device section. Then comment out 'Load dri' in Modules section if it is present. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal error
[EMAIL PROTECTED] Raphael Peters Splittenbrede 17 33613 Bielefeld Germany Ladies and Gentlemen, after installing the Nvidia-drivers NVIDIA_kernel-1.0-4191.src.rpm and NVIDIA_GLX-1.0-4191.i386.rpm I couldn´t get back to my X11 desktop. I got an error-message which I didn´t understand, ´cause I´m totally new to Linux. My system: Mandrake Linux 9.2, AthlonXP 2200+ on Via KT266a, MSI GeForce4 Ti4200 4x AGP As an attachement I sent the XFree log file. In case of an answer, could you use simple english or maybe you have some german-speaking folks out there (whereever it is...:) Raphael Peters XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 10 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Feb 9 01:56:48 2004 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout de(nodeadkeys) (**) XKB: layout: de(nodeadkeys) (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1849,3099 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1849,3177 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1849,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 50 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1849,3065 rev 74 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0253 card 1462,8705 rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdde0 - 0xdfef (0x210) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xcdc0 - 0xddcf (0x1010) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xde00/24, 0xd000/27, 0xddc8/19, BIOS @ 0xdfee/17 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0
[XFree86] fatal error: no screens found
Hello xfree86, what must i do? -- Best regards, Stas mailto:[EMAIL PROTECTED] XFree86.0.log Description: Binary data
Re: [XFree86] fatal error: no screens found
Configure your X-server. RH has xconfigurator or whatever it's called. Alternatively XFree86 -configure can generate an XF86Config file for you. Mark. On Wed, 8 Oct 2003, [Windows-1251] Ñòàñ wrote: Hello xfree86, what must i do? -- Best regards, Stas mailto:[EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal Error
hi alex, Would you use Xconfigurator to configure the screens. This probably means your monitor/video card may not be able to use the resolution in you /etc/Xf86config. Please change your resolution modes. Satej Alex Joyner wrote: Hello, I'm trying to install Linux on a Dell Inspiron 1100. Everything works, but the display takes only the center %60 of the screen. I have an A22 bios, Linux Kernel version 2.4.20-8. I'm running RedHat 9.0 and XFree86 Version 4.3.0 (Red Hat Linux release 4.3.0-2). I have an Intel I845GL chip with driver i810. I have tried to apply a patch that I found online called 845 patch but it still does not work. When I boot it gives me errors: (EE) I810(0): No Video BIOS modes for chosen depth. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Is there a patch that you know of with detailed instructions? I'm fairly new to Linux so I don't want to screw anything up. Thanks, Alex Joyner ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Error
Hello, I'm trying to install Linux on a Dell Inspiron 1100. Everything works, but the display takes only the center %60 of the screen. I have an A22 bios, Linux Kernel version 2.4.20-8. I'm running RedHat 9.0 and XFree86 Version 4.3.0 (Red Hat Linux release 4.3.0-2). I have an Intel I845GL chip with driver i810. I have tried to apply a patch that I found online called 845 patch but it still does not work. When I boot it gives me errors: (EE) I810(0): No Video BIOS modes for chosen depth. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Is there a patch that you know of with detailed instructions? I'm fairly new to Linux so I don't want to screw anything up. Thanks, Alex Joyner ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal error ....... where from? ime_mailer.4-724151-619387-2T6DPDSP@ime.tumbleweed.com
Title: IME Package Delivery IME Delivery Menu Log In Important Delivery Help You have received an important delivery from Blagoy Genadiev. Please pick up the package at your earliest convenience by clicking this button: Pick up Package The package will expire on Wednesday September 17, 2003 at 13:12:52 PDT7. Help with Your Package Having trouble? If clicking the Pick up Package button above does not automatically launch your web browser and take you to the package, then follow these steps: Open a web browser window. Copy and paste the following Web address into the "location" or "address" bar of the browser: https://ime.tumbleweed.com/ime?x=4-724151-619387-2T6DPDSP Press enter. Once you arrive at the package web page, you can access the attached file(s) and/or private message. Still having trouble? Please send a brief email explaining the situation to: [EMAIL PROTECTED] IME is a trademark of Tumbleweed Communications Corp.
[XFree86] Fatal error
Hello, I am very new to the Linux world. This morning, I logged in and typed startx and received this message: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock adn start again. As I mentioned, I do not know enough yet to diagnose nor resolve this issue without help. Any tips would be greatly appreciated. I do not even know how to search for the version number so that I could search the reports on your website. Thank you very much, LAura Huff
Re: [XFree86] Fatal error
Hi, I am very new to the Linux world. This morning, I logged in and typed startx and received this message: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock adn start again. As I mentioned, I do not know enough yet to diagnose nor resolve this issue without help. As it is said, the server is probably already in use.. type ctrl-alt-7 would normally replace you in your x-environment. .Yves. -: This is a Unix email virus. It works on the honor system: If you're running a variant of Unix, please forward this message to everyone you know and delete a bunch of your files at random. Thank you for your cooperation. :- ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Fatal error
One nice thing about Linux is the error messages are sometimes helpful and sometimes humorous and sometimes both but rarely neither. This error message is one of the helpful variety. Fatal server error: Server is already active for display 0 This is the really helpful part. If this server is no longer running, remove /tmp/.X0-lock and start again. If you are the only user of your system and you can't run X at all. Then go ahead and delete the file specified in the error message. remove /tmp/.X0-lock You may want to use the rm command to do the deletion. Example: rm -v /tmp/.X0-lock Here is a man page for the rm command. You can also access the man page for this command by typing man rm on your system. My apologies if you are already aware of this. http://www.die.net/doc/linux/man/man1/rm.1.html HTH, cyn -Original Message- From: Laura Pippio Hufff [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 28, 2003 9:15 AM To: [EMAIL PROTECTED] Subject: [XFree86] Fatal error ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Fatal error 104 upon starting x
Lionel Lecoq wrote: The XF86Config file you show is an X 3.3.6 config file (keyboard section...) and you are running X 4.2 using (luckily) XF86Config-4, see log... any change you want to do has to be done in XF86Config-4 You should look at the input device section for the mouse. Not having the XF86Config-4 I cannot judge what may be wrong... Thanks for your help! I actually didn't have a mouse connected at the time, not realizing that it would make a difference. Now, Xconfigurator will actually run properly, but when it tries to test it, I can see the desktop, but with lots of the lines and static stuff, so I can't actually read anything on the screen. I tested using 640x480 with 8-bit color. Here are updated XF86Config-4 and log files: -- XF86Config-4: -- # XFree86 4.2.0 configuration generated by Xconfigurator.athena 4.10.7 Section ServerLayout Identifier XFree86 Configured Screen 0 Screen0 0 0 InputDeviceMouse0 CorePointer InputDeviceKeyboard0 CoreKeyboard EndSection # Red Hat Linux 6.0 and later use the xfs font server for improved # interactive performance Section Files FontPath unix/:7100 EndSection # Module loading section Section Module Load dbe # Double-buffering Load GLcore# OpenGL support Load dri # Direct rendering infrastructure Load glx # OpenGL X protocol interface Load extmod# Misc. required extensions Load v4l # Video4Linux # Load record # X event recorder # You only need the following two modules if you do not use xfs. # Load freetype # TrueType font handler # Load type1 # Adobe Type 1 font handler EndSection Section InputDevice Identifier Keyboard0 Driver keyboard Option XkbLayout us EndSection Section InputDevice Identifier Mouse0 Driver mouse Option Device /dev/mouse Option Protocol PS/2 Option Emulate3Buttons off Option ZAxisMapping 4 5 EndSection Section Monitor Identifier Panasonic E15 VendorName Unknown ModelName Unknown HorizSync 30-61 VertRefresh 50-90 Option dpms EndSection Section Device Identifier Cirrus Logic GD543x Driver cirrus BoardName Unknown # Device section for Cirrus Logic GD5430/34-based cards. #MemBase 0x00e0 # ISA card that maps to 14Mb #MemBase 0x0400 # VLB card that maps to 64Mb #MemBase 0x8000 # VLB card that maps to 2048Mb #MemBase 0x0200 # VLB card that maps to 32Mb #Option linear # Use Option no_bitblt if you have graphics problems. If that fails # try Option noaccel. # Refer to /usr/X11R6/lib/doc/README.cirrus. # To allow linear addressing, uncomment the Option line and the # address that the card maps the framebuffer to. EndSection Section Device Identifier Linux Frame Buffer Driver fbdev BoardName Unknown EndSection Section Screen Identifier Screen0 Device Cirrus Logic GD543x Monitor Panasonic E15 DefaultDepth 8 Subsection Display Depth 8 Modes 800x600 EndSubSection EndSection Section DRI Mode 0666 EndSection -- XFree86.9.log -- XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.9.log, Time: Mon Mar 31 02:40:20 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Panasonic E15 (**) | |--Device Cirrus Logic GD543x (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (++) FontPath set to /usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/misc,/usr/share/fonts/ISO8859-2/75dpi,/usr/share/fonts/ISO8859-2/misc,/usr/share/fonts/ISO8859-7/75dpi,/usr/share/fonts/ISO8859-7/misc,/usr/share/fonts/ISO8859-9/75dpi,/usr/share/fonts/ISO8859-9/misc,/usr/X11R6/lib/X11/fonts/cyrillic (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No
[XFree86] Fatal error 104 upon starting x
I recently installed Red Hat Linux 7.3 on my system, but X fails to start up properly. When X attempts to start up, it prints the following message: XIO: fatal error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 minutes remaining [repeats 9 more times] INIT: id x respawning too fast: disabled for 5 minutes Each time the XIO message pops up, the screen displays random color lines/static on the screen, before stopping for 5 minutes. Below are the config and log files: /etc/X11/XF86Config: # File generated by XConfigurator.athena. # ** Section Files RgbPath /usr/X11R6/lib/X11/rgb FontPath unix/:7100 EndSection Section ServerFlags #NoTrapSignals #DontZap #DontZoom EndSection Section Keyboard ProtocolStandard # when using XQUEUE, comment out the above line, and uncomment the # following line #Protocol Xqueue AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients #ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) #Xleds 1 2 3 #To set the LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAltMeta RightAltMeta ScrollLock Compose RightCtlControl # To disable the XKEYBOARD extension, uncomment XkbDisable. #XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: #XkbModelpc102 # If you have a US Microsoft Natural keyboard, you can use: #XkbModelmicrosoft # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: #XkbLayout de # or: #XkbLayout de #XkbVariant nodeadkeys # # If you'd like to switch the positions of your capslock and # control keys, use: #XkbOptions ctrl:swapcaps # These are the default XKB settings for XFree86 #XkbRulesxfree86 #XkbModelpc101 #XkbLayout us #XkbVariant #XkbOptions XkbKeycodes xfree86 XkbTypesdefault XkbCompat default XkbSymbols us(pc101) XkbGeometry pc XkbRulesxfree86 XkbModelpc101 XkbLayout us EndSection # ** # Pointer section # ** Section Pointer ProtocolPS/2 Device /dev/mouse ZAxisMapping 4 5 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. #Protocol Xqueue # Baudrate and SampleRate are only for some Logitech mice #BaudRate 9600 #SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #Emulate3Buttons #Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #ChordMiddle EndSection # ** # Monitor section # ** # Any number of monitor sections may be present Section Monitor Identifier Panasonic E15 VendorName Unknown ModelName Unknown # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-61 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-90 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent #ModeLine 1024x768i 45 1024 1048 1208 1264 768 776 784 817 Interlace #Mode 1024x768i #DotClock 45 #HTimings 1024 1048 1208 1264 #VTimings 768 776 784 817 #Flags Interlace #EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 512x384 @ 78 Hz, 31.50 kHz hsync
Re: [XFree86] Fatal error 104 upon starting x
(EE) xf86OpenSerial: Cannot open device /dev/mouse No such file or directory. Either that's the incorrect device for your mouse or your kernel is not supporting your mouse. Mark. On Sun, 30 Mar 2003, Kevin W Chen wrote: I recently installed Red Hat Linux 7.3 on my system, but X fails to start up properly. When X attempts to start up, it prints the following message: XIO: fatal error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 minutes remaining [repeats 9 more times] INIT: id x respawning too fast: disabled for 5 minutes Each time the XIO message pops up, the screen displays random color lines/static on the screen, before stopping for 5 minutes. Below are the config and log files: ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Error Report!
While loading Linux in Graphical Mode generates the error attached. Please have a look and let me know how to resolve this. Regards, Asim Ansari Sr. Network Administrator * i2c Inc. 4 Old FCC Ferozepur Road, Lahore 54660. PAKISTAN. Ph: +92 42 111 000 911 x 118 Fax: +92 42 571 0376 Email: [EMAIL PROTECTED] Visit us on the web http://www.i2cinc.com * --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 XFree86.0.log Description: Binary data
[XFree86] Fatal Error Report!
While loading Linux in Graphical Mode generates the error attached. Please have a look and let me know how to resolve this. Regards, Asim Ansari Sr. Network Administrator * i2c Inc. 4 Old FCC Ferozepur Road, Lahore 54660. PAKISTAN. Ph: +92 42 111 000 911 x 118 Fax: +92 42 571 0376 Email: [EMAIL PROTECTED] Visit us on the web http://www.i2cinc.com * --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 XFree86.0.log Description: Binary data
Re: [XFree86] Fatal Error Report!
You need to start your font server. Tom ps Message On Monday 31 March 2003 8:24 am, Asim Ansari wrote: While loading Linux in Graphical Mode generates the error attached. Please have a look and let me know how to resolve this. Regards, Sig: Asim Ansari Sr. Network Administrator * i2c Inc. 4 Old FCC Ferozepur Road, Lahore 54660. PAKISTAN. Ph: +92 42 111 000 911 x 118 Fax: +92 42 571 0376 Email: [EMAIL PROTECTED] Visit us on the web HYPERLINK http://www.i2cinc.com/http://www.i2cinc.com * --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/03 Really? Tom Wesley ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal error starting X
I send you my log file when I start in grphic mode in Linux red hat 8.0 I'm sure that my video card is S3 Trio 64 v2 DX I'm waiting your solution Thanks attachment: winmail.dat
[XFree86] Fwd: Argent: XFRee86 fatal error! (again)
Note: forwarded message attached. = http://members.fortunecity.com/makko __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/---BeginMessage--- Note: forwarded message attached. = http://members.fortunecity.com/makko __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/---BeginMessage--- Hello, i'm on a redhat 8.0 box and when i booted the thing this morning, i got this messege((again) see first attachment). So i did as you advised me last time, i loged in in text-mode as root an typed in the following command:sevice xfs startand then i typed the following command:service xfs statusad got the following response(see attached msg.doc) Now how do i fix this? Timothyhttp://members.fortunecity.com/makkoDo you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, and more XFree86.0.log Description: XFree86.0.log msg.doc Description: msg.doc ---End Message--- ---End Message---
[XFree86] Fwd: Argent: XFRee86 fatal error! (again)
Note: forwarded message attached. = http://members.fortunecity.com/makko __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/---BeginMessage--- Hello, i'm on a redhat 8.0 box and when i booted the thing this morning, i got this messege((again) see first attachment). So i did as you advised me last time, i loged in in text-mode as root an typed in the following command:sevice xfs startand then i typed the following command:service xfs statusad got the following response(see attached msg.doc) Now how do i fix this? Timothyhttp://members.fortunecity.com/makkoDo you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, and more XFree86.0.log Description: XFree86.0.log msg.doc Description: msg.doc ---End Message---
[XFree86] FATAL ERROR 4.3.0: make install
Anyone else get this? make[5]: Leaving directory `/home/war/4.3.0/source/xc/lib/GL/dri/drm' make[4]: Leaving directory `/home/war/4.3.0/source/xc/lib/GL/dri' installing in lib/GL/GL... make[4]: Entering directory `/home/war/4.3.0/source/xc/lib/GL/GL' install -c -m 0755 libGL.so.1.2 /appc/xfree86-4.3.0/lib + rm -f /appc/xfree86-4.3.0/lib/libGL.so.1 + ln -s libGL.so.1.2 /appc/xfree86-4.3.0/lib/libGL.so.1 + rm -f /appc/xfree86-4.3.0/lib/libGL.so + ln -s libGL.so.1.2 /appc/xfree86-4.3.0/lib/libGL.so install in lib/GL/GL done make[4]: Leaving directory `/home/war/4.3.0/source/xc/lib/GL/GL' installing in lib/GL/mesa/src/OSmesa... make[4]: Entering directory `/home/war/4.3.0/source/xc/lib/GL/mesa/src/OSmesa' gcc-c -o ../../../../../lib/GL/mesa/src/X86/common_x86_asm.o ../../../../../lib/GL/mesa/src/X86/common_x86_asm.S In file included from ../../../../../lib/GL/mesa/src/X86/common_x86_asm.S:43: ../../../../../lib/GL/mesa/src/X86/matypes.h:9:22: assyntax.h: No such file or directory ../../../../../lib/GL/mesa/src/X86/common_x86_asm.S:44:33: common_x86_features.h: No such file or directory make[4]: *** [../../../../../lib/GL/mesa/src/X86/common_x86_asm.o] Error 1 make[4]: Leaving directory `/home/war/4.3.0/source/xc/lib/GL/mesa/src/OSmesa' make[3]: *** [install] Error 2 make[3]: Leaving directory `/home/war/4.3.0/source/xc/lib/GL' make[2]: *** [install] Error 2 make[2]: Leaving directory `/home/war/4.3.0/source/xc/lib' make[1]: *** [install] Error 2 make[1]: Leaving directory `/home/war/4.3.0/source/xc' make: *** [install] Error 2 Command exited with non-zero status 2 3.85user 3.38system 0:13.59elapsed 53%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (137241major+60787minor)pagefaults 0swaps [EMAIL PROTECTED] xc]$ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Urgent!: xfree86 fatal error.
On Wed, 26 Feb 2003, Mak wrote: Hello, i've been using redhat 8.0 for about a month and a half now to administrate and sudenly when i started the server this morning i got this message (see attached log file) how can i fix it? Timothy Start your font server (xfs). Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FATAL Error advice:
Hi I am having Fatal Server Error - No screens found problem on this system. FreeBSD 4.7 Compaq Proliant 5500 Graphics card: Riva TNT 2 M64 32MB PCI Version Card in Primary PCI Bus The log file has the following relevant entries: (II) Primary device is : PCI 00:02:0 (WW) NV: No matching device section for instance (Bus ID PCI:0:2:0) found (EE) No devices detected It would seem the problem is down to the difference between 02 and 2!! How can this be best dealt with? Thanks for any help David Southwell ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86