Re: [zfs-discuss] Any rhyme or reason to disk dev names?
I am curious to know if there is an easy way to guess or identify the device names of disks. Have a look at the file /etc/path_to_inst. There you will find all device instances managed by a particular driver. The first entry of each line is the physical device. If you then look in /dev/rdsk and check which symbolic link of the form cNtNdNsN points to this physical device, you have your match. One caveat is that if you move disks around, /etc/path_to_inst will grow, and there is no guarantee that any device listed in this file is really present in the running system. HTH -- Volker -- Volker A. Brandt Consulting and Support for Oracle Solaris Brandt Brandt Computer GmbH WWW: http://www.bb-c.de/ Am Wiesenpfad 6, 53340 Meckenheim, GERMANYEmail: v...@bb-c.de Handelsregister: Amtsgericht Bonn, HRB 10513 Schuhgröße: 46 Geschäftsführer: Rainer J.H. Brandt und Volker A. Brandt When logic and proportion have fallen sloppy dead ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
On 21/12/11 05:58 PM, Matthew R. Wilson wrote: Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the t position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of: /dev/dsk/c0t5000CCA228C0E488d0 I could not find any correlation between that identifier and the a) controller the disk was plugged in to, or b) the port number on the controller. The only way I could make a mapping of device name to controller port was to add one drive at a time, reboot the system, and run format to see which new disk name shows up. I'm guessing there's a better way, but I can't find any obvious answer as to how to determine which port on my LSI controller card will correspond with which seemingly random device name. Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? Hi Matthew, By default the names for disks attached via mpt_sas(7d), or mpt(7d) if your disks are new enough, is to use their WWN as reported in the SCSI INQUIRY Page83 response. The old paradigm you refer to is based on the physical id of the device on a parallel SCSI bus. That doesn't scale with SAS, and is something we're trying to move away from. If you'd like some info about how we use devids and guids, please refer to my presentation http://www.jmcp.homeunix.com/~jmcp/WhatIsAGuid.pdf For your particular configuration, if you note the serial number and WWN of the device before you insert them, you can match that up with info from iostat -En and/or prtconf -v. hth, James C. McPherson -- Oracle http://www.jmcp.homeunix.com/blog ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
On Wed, Dec 21, 2011 at 1:58 AM, Matthew R. Wilson mwil...@mattwilson.org wrote: Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the t position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of: /dev/dsk/c0t5000CCA228C0E488d0 I could not find any correlation between that identifier and the a) controller the disk was plugged in to, or b) the port number on the controller. The only way I could make a mapping of device name to controller port was to add one drive at a time, reboot the system, and run format to see which new disk name shows up. I'm guessing there's a better way, but I can't find any obvious answer as to how to determine which port on my LSI controller card will correspond with which seemingly random device name. Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? Depending on the hardware you are using, you may be able to benefit from croinfo. $ croinfo D:devchassis-path t:occupant-type c:occupant-compdev - --- - /dev/chassis//SYS/SASBP/HDD0/disk disk c0t5000CCA012B66E90d0 /dev/chassis//SYS/SASBP/HDD1/disk disk c0t5000CCA012B68AC8d0 The text in the left column represents text that should be printed on the corresponding disk slots. -- Mike Gerdts http://mgerdts.blogspot.com/ ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
On Dec 21, 2011, at 2:58, Matthew R. Wilson mwil...@mattwilson.org wrote: Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? You have gotten some good responses that should help you out. However, you shouldn't have to reboot to see the new disks try devfsadm. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
On 2011-12-21 09:22, v...@bb-c.de wrote: I am curious to know if there is an easy way to guess or identify the device names of disks. Have a look at the file /etc/path_to_inst. There you will find all device instances managed by a particular driver. The first entry of each line is the physical device. If you then look in /dev/rdsk and check which symbolic link of the form cNtNdNsN points to this physical device, you have your match. One caveat is that if you move disks around, /etc/path_to_inst will grow, and there is no guarantee that any device listed in this file is really present in the running system. HTH -- Volker Take a look at 'diskinfo' - should be in Solaris 10U10 and Solaris 11. Cheers, Henrik ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
On Dec 21, 2011, at 3:14 AM, James C. McPherson wrote: On 21/12/11 05:58 PM, Matthew R. Wilson wrote: Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the t position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of: /dev/dsk/c0t5000CCA228C0E488d0 I could not find any correlation between that identifier and the a) controller the disk was plugged in to, or b) the port number on the controller. The only way I could make a mapping of device name to controller port was to add one drive at a time, reboot the system, and run format to see which new disk name shows up. I'm guessing there's a better way, but I can't find any obvious answer as to how to determine which port on my LSI controller card will correspond with which seemingly random device name. Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? Hi Matthew, By default the names for disks attached via mpt_sas(7d), or mpt(7d) if your disks are new enough, is to use their WWN as reported in the SCSI INQUIRY Page83 response. The old paradigm you refer to is based on the physical id of the device on a parallel SCSI bus. That doesn't scale with SAS, and is something we're trying to move away from. More to the point, on SAS and other similar busses, there simply *isn't* such a thing as a simple target number. The old numbering scheme from parallel SCSI was suitable when you could have only 7 or 15 or so devices on a single bus. With modern busses you can have many thousands of devices on the same fabric. So we address them by WWN. - Garrett If you'd like some info about how we use devids and guids, please refer to my presentation http://www.jmcp.homeunix.com/~jmcp/WhatIsAGuid.pdf For your particular configuration, if you note the serial number and WWN of the device before you insert them, you can match that up with info from iostat -En and/or prtconf -v. hth, James C. McPherson -- Oracle http://www.jmcp.homeunix.com/blog ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Any rhyme or reason to disk dev names?
Thank you for all of the good pointers, everyone. croinfo and diskinfo don't give me any output, but that's not surprising since this is a home-built system. But it's good to know those utilities exist for production hardware. Making the association between the disk serial number and target number by matching them up in the iostat -En or prtconf output looks like it will work for me. Thanks again! -Matthew On Wed, Dec 21, 2011 at 8:21 AM, Garrett D'Amore garrett.dam...@nexenta.com wrote: On Dec 21, 2011, at 3:14 AM, James C. McPherson wrote: On 21/12/11 05:58 PM, Matthew R. Wilson wrote: Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the t position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of: /dev/dsk/c0t5000CCA228C0E488d0 I could not find any correlation between that identifier and the a) controller the disk was plugged in to, or b) the port number on the controller. The only way I could make a mapping of device name to controller port was to add one drive at a time, reboot the system, and run format to see which new disk name shows up. I'm guessing there's a better way, but I can't find any obvious answer as to how to determine which port on my LSI controller card will correspond with which seemingly random device name. Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? Hi Matthew, By default the names for disks attached via mpt_sas(7d), or mpt(7d) if your disks are new enough, is to use their WWN as reported in the SCSI INQUIRY Page83 response. The old paradigm you refer to is based on the physical id of the device on a parallel SCSI bus. That doesn't scale with SAS, and is something we're trying to move away from. More to the point, on SAS and other similar busses, there simply *isn't* such a thing as a simple target number. The old numbering scheme from parallel SCSI was suitable when you could have only 7 or 15 or so devices on a single bus. With modern busses you can have many thousands of devices on the same fabric. So we address them by WWN. - Garrett If you'd like some info about how we use devids and guids, please refer to my presentation http://www.jmcp.homeunix.com/~jmcp/WhatIsAGuid.pdf For your particular configuration, if you note the serial number and WWN of the device before you insert them, you can match that up with info from iostat -En and/or prtconf -v. hth, James C. McPherson -- Oracle http://www.jmcp.homeunix.com/blog ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
[zfs-discuss] Any rhyme or reason to disk dev names?
Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the t position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of: /dev/dsk/c0t5000CCA228C0E488d0 I could not find any correlation between that identifier and the a) controller the disk was plugged in to, or b) the port number on the controller. The only way I could make a mapping of device name to controller port was to add one drive at a time, reboot the system, and run format to see which new disk name shows up. I'm guessing there's a better way, but I can't find any obvious answer as to how to determine which port on my LSI controller card will correspond with which seemingly random device name. Can anyone offer any suggestions on a way to predict the device naming, or at least get the system to list the disks after I insert one without rebooting? Thank you! -Matthew ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
