> is usb confirmed not working? if so, how? normally this message is harmless.
> (though an indiciation of a bug in usb.)
Yes, I'm using usb device here, though not so hard use.
Kenji
> How did you get usb working? I have the same error on my machine.
On 9front, you don't need to some command suchusffat:, just
plugin the stick.
Then just see /shr directory by acme, then, you'll find some sdU** directory.
That's it.
Kenji
>
> How did you get usb working? I have the same error on my machine.
>
is usb confirmed not working? if so, how? normally this message is harmless.
(though an indiciation of a bug in usb.)
- erik
On Dec 8, 2011, at 6:26 AM, kokam...@hera.eonet.ne.jp wrote:
>> error messages are:
>> ehci 0xe000: port 5 didn't reset after 500ms: sts 0x1101t1data
>
> I now know even this error, the usb device is working. :-)
>
> The diskless terminal machine's floppy drive is also recongnized
> properl
> error messages are:
> ehci 0xe000: port 5 didn't reset after 500ms: sts 0x1101t1data
I now know even this error, the usb device is working. :-)
The diskless terminal machine's floppy drive is also recongnized
properly. So, the floppy problem depends on hardware.
Now, I can use, floppy dri
> For pxe boot, I'll try soon, erik.
I've set up this pxe boot using 9front's package itself, such as
/386/9bootpxe. I know now 512MB is enough to boot
/386/9pcf with diskless terminal.
This diskless terminal's usb device works fine and mounted to
/shr/sdU3.0 automatically. It's very convenient
> The both of my 9front's machine has ehci USB chip, and failed to use
> both.
error messages are:
ehci 0xe000: port 5 didn't reset after 500ms: sts 0x1101t1data
and cat /dev/sdU6.1/ctl says only one line with last word busy.
No information for this port.
I remember I saw this in an early ver
Sorry cinap, I deleted your mail mistakenly, and saw it from web browser.
Thank you for your snswer how to manage cwfd, such that
"echo < fscons cmd> >> /srv/cwfs.cmd". Yes, it worked.
Is the /386/9bootxxx different from Plan 9's /386/9load?
Can /386/9load load the 9front's kernel from net?
I
On Fri Dec 2 06:05:23 EST 2011, kokam...@hera.eonet.ne.jp wrote:
> Hi
>
> I just installed 9front on a Celeron 2.8GHz with 1GB mashine
> on a 40GB hard drive. :-) Yes, I just tried it for test.
> (When I used 528MB memory, I was rejected by insufficient memory).
i think that cinap's right. so
528MB is enougth memory to even compile python and ghostscript
without a swap partition :)
looks like there is some problem with the memory detection. there
was some bug in the e820 code of the bootloader. if the current
iso detects your memory, updating the bootloader on the 9fat
might fix it.
> How I can control the cwfs (on the terminal above)? In the Ken's fileserver
> we have a special console to control the fileserver. However, I could not
> find such a console on 9front...
Say, how to make /usr/okamoto directory with uid okamoto, gid okamoto
etc, or /n/abc?
Kenji
On Fri, Dec 2, 2011 at 9:04 AM, wrote:
> Hi
>
> I just installed 9front on a Celeron 2.8GHz with 1GB mashine
> on a 40GB hard drive. :-) Yes, I just tried it for test.
> (When I used 528MB memory, I was rejected by insufficient memory).
>
> I know 9front doesn't add anything new to Plan 9. Ho
Hi
I just installed 9front on a Celeron 2.8GHz with 1GB mashine
on a 40GB hard drive. :-) Yes, I just tried it for test.
(When I used 528MB memory, I was rejected by insufficient memory).
I know 9front doesn't add anything new to Plan 9. However, I'm interested
how they implemented Ken's fs t
13 matches
Mail list logo