Hi,
the device type is not correct. Have you define the devclass correct ??
It's must be "DLT and not "Generic".
But look first in the "TSM Management Console" if the TSM-Driver is loaded and
identifiy the drives correct
regards
Michael Garnebode
Diplom-Informatiker
Systemberater
Schmitz RZ
Hi to All
I configure a new automatic library Scalar 100 SDLT (define library , drives
, path library , path drive)
Here the following queries:
1. q libr
Library Name: SCALAR100
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
External Manager:
RS
Thank you fellow worker!!
-Original Message-
From: Bock, Kris [mailto:[EMAIL PROTECTED]
Sent: 09 October, 2003 1:11 PM
To: [EMAIL PROTECTED]
Subject: FW: TDPSQL Restore Problem
Komrades,
I have resolved the issue. I was required to restore from
the MSSQL full bac
Komrades,
I have resolved the issue. I was required to restore from the MSSQL
full backup, then apply the TDP diff. The ability to restore a TDP diff without the
corresponding TDP full was not obvious due to a slight nuance with the TDP GUI. If,
in the "Restore" window
Ken,
Assuming you have adequate free disk online, you should be able to use a
devclass where devtype=FILE.
I'd recommend setting up a devclass for the desired target directory and an
appropriate MAXCAPacity. (Default for MAXCAP is 4 MB.) Assuming that
you're doing an export of node data, you (pro
Komrades,
I am attempting a TDPSQL restore for a customer and running into
problems. TDPSQL Ver 5.1.5/TSM Server 5.2.1.1. We run full backups on the weekend
and diffs during the week. Unfortunately, the customers ran a MSSQL full backup (not
using TDP) in between the T
Enviro:
W2K 5.1.6.3 TSM server
DLT library
I have read over the TSM Admin. Reference manual on all the different
kinds of EXPORTS.
I know that you can EXPORT to DLT tapes and DEVclass=SERVER.
Question:
Is it possible to EXPORT to a disk file? (ie., E:\export\exportnode.txt)
I thought it was po
TSM Community,
Please see the new Flash text below.
Registration to "My Support page" will automate the Flash notification
information you are now receiving.
Flash 10251 Text:
Abstract: Installation of IBM Tivoli Storage Manager V5R2 requires AIX
5.1 ML1 or higher levels of AIX
Wh
Thanks everyone for your replies... This has been the result so far...
We temporarily gave up on the Web GUI. We weren't sure if that was
part of the problem.
Restore onto the test system (as suggested) worked. 2.15GB, 87k+
files, no errors.
A second attempt at restoring from the GUI on the ori
We have a 3584 with six G1 drives attached to a SUN 880. What sort of compression
should I expect to receive over the long run? What device is the best one to use, the
st or the stc?
Brian --
I don't have anywhere near your client count, so take this with a humongous
grain of salt :-)
I set up my disk pools based on tape pools (nextpools) based upon D/R
recovery requirements. I do very limited co-location, because I'm not about
to micro-manage my scratch tapes and I don't hav
select sum(bytes)/1000/1000 as "MB_per_day" from summary where
activity='BACKUP' and (current_timestamp-end_time)hours <= 24 hours
However, this only looks at backup traffic. You may want to look at archive
traffic as well.
John G. Talafous IS Technical Principal
The Timken Company
The only time I have seen this is when people have tried to restore files
from a compressed volume to a non-compressed volume or NSS to non.
--
Bruce Kamp
Midrange Systems Analyst II
Memorial Healthcare System
E: [EMAIL PROTECTED]
P: (954) 987-2020 x4597
F
Thomas,
The TSM API does not support encryption.
Thanks,
Del
> We may have to start encrypting backups of some files. It is clear
> that we can do this for backups created by the backup/archive client.
> Does the TSM API provide the same enc
Ah, those little fine points! Thanks Neil.
David Longo
>>> [EMAIL PROTECTED] 10/07/03 10:20AM >>>
--
David,
Data Protection for Oracle will work with your current server without
losing any functionality. However, in the manual we are required to state
the lowest serv
Fabrice,
It depends on the state that the restore was left in.
Data Protection for Exchange will allow you to just
restore an incremental backup assuming the database restore
was successful AND left in a proper state which is uncertain
in the situation that you describe. You can try the increm
Hi,
If you are restoring via Terminal service and the session disconnect the files vil be
lost also if you use default prefences when restoring and you logoff on the the your
are restoring your lose data.
- Michael
-Oprindelig meddelelse-
Fra: Fabrice H [mailto:[EMAIL PROTECTED]
Sendt:
Hi All
we have a problem with a corrupt 1 of 4 DB in First Storage Group
on a Echange server 2000
the restore of the 30 GB of DB was good
but the restore crash during restore of Log file ( tdp incr backup) about 12 GB
on TSM server ANR0566W
Retrieve or Restore failed for se
On Thursday 25 September 2003 16:00, Neil Rasmussen wrote:
> The log from the first backup is a little baffling because Oracle is
> claiming that it cannot find the archive log but Data Protection for
> Oracle is not complaining. Compare it to the second log where DP for
> Oracle is actually giving
We may have to start encrypting backups of some files. It is clear
that we can do this for backups created by the backup/archive client.
Does the TSM API provide the same encryption capability?
We have two types of API clients currently installed: SQL/BackTrack
for Oracle and TDP for Oracle. We ma
Hi!
I have set Reuse Delay to 1 day.
So it´s should move 15-20 tapes to scratch pool. But it´s does´nt do that. :(
/C
-Ursprungligt meddelande-
Från: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Hart,
Charles
Skickat: den 8 oktober 2003 12:59
Till: [EMAIL PROTECTED]
Ämne: Re: From pr
Hi Henrik,
If you want to have something equivalent to a "full" backup, shouldn't you use
"copymode absolute" ? Else, only modified files would be backuped ...
My 2 cents.
Arnaud
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Panalpina Management Ltd., IT Group |
Hello everyone,
We are moving from TSM 4.2.1.9 on OS/390 to TSM 5.2 on AIX 5.2 and I have
the opportunity to recreate all of my Policy Domains, storage pools,
management classes and copy groups. I was wondering if anyone would like to
share opinions with regards to structure. What I mean is one la
Could I perform the backup via LAN without defined rmtX devices? After I ran cfgmgr
-v, I ran lsdev -Cc tape but they didn't show up the list of available rmtX. How
do I do?
I hope to hear from you...
Regards. Juan.
-Mensaje original-
De: Zlatk
Hello TSMers,
Does anyone have a good SQL query to determine the total amount of data
you've backed up in the last 24 hours? It would need to capture all data
received, since we have backups that go to disk and tape concurrently.
Thanks in advance for any assistance,
Josh Gable
EDS
Enterprise S
Hi,
I'll upgrade a TSM server 4.1.2 to TSM 5.2.1.1 running on Windows 2000 SP2. The
library is a Storagetek L180 with 3 DLT7000 drives. Two DLT7000 drives will be
replaced with SDLT320 drives. I would like to use the remaining DLT7000 drive to take
the daily full TSM database backup.
Can this
Hi Del,
It's was that,
Thanks for the help.
> Regards
> Bo Nielsen
> * +45 4386 4671
> COOP Danmark A/S* (Internt postcenter): 6230
> IT-Driftscenter * [EMAIL PROTECTED]
>
Remember, a dead fish can float dow
Bo,
With DP for SQL 5.2.1, it picks up the locale
from the machine setting. You are running in a locale
that is not supported. i.e. Danish, and so it is
giving you the warning and then continuing in English.
The following note is in the README:
Limitation:
If you run Data Protection for
Could I perform the backup via LAN without defined rmtX devices? After I ran cfgmgr
-v, I ran lsdev -Cc tape but they didn't show up the list of available rmtX. How
do I do?
I hope to hear from you...
Regards. Juan.
-Mensaje original-
De: Zlatko Krastev
Hi Karel,
I use a downloaded version from the FTP site,
and there is no TDPSDAN.TXT.
Regards
Bo Nielsen
* +45 4386 4671
COOP Danmark A/S* (Internt postcenter): 6230
IT-Driftscenter * [EMAIL PROTECTED]
Re
But this doesn't cover you if you do a "special" backup in addition to the
normal incremental. Then you now have 29 versions instead of 28, and there
goes your 4-week recoverability. If I have a client that has a point-in-time
recoverability requirement, I always set the VEREXIST and VERDELETE to
N
Hi,
First I would replace tdpsdan.txt with a version from the install media. It
seems to be corrupt.
Regard,
Karel
-Oorspronkelijk bericht-
Van: Bo Nielsen [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 8 oktober 2003 13:43
Aan: [EMAIL PROTECTED]
Onderwerp: Return code:113 from TDP SQL b
Hi All,
I was backing up a Windows2003's MSAC sql DB,
but I get Return code: 113, when it's finish.
When I start the GUI I receive the message:
ANS0102W Unable to open the message repository tdpsdan.txt. The
American English repository will be used instead.
The TDPsql client is 5.2.1.0.
Th
Hi all,
I have used TSM Server 5.1.1 and Storage Agent 5.1.1 too. Please brief the
cause that may be make a storage agent down. I found this problem many time.
Sometime there is not the error log and session has been terminated. The following
message that I have got from dsmtsa log fil
Or,
VERE nolimit
VERD nolimit
RETE 31 or 35
RETO 31 or 35
FREQ 0
//Henrik
Karel Bos
Hi,
I think you are trying to delete drive while it still associated with a path.
You must delete a path first. The path is automatic created during upgrade to TSM 5.1.
Wira Chinwong
-Original Message-
From: Christoph Pilgram [mailto:[EMAIL PROTECTED]
Sent: Wednesday, Octob
about 500.
-
The information contained in this message is intended only for the personal and
confidential use of the recipient(s) named above. If the reader of this message is not
the intended recipient or an agent responsible for delivering it to the
Hi,
Something like:
Versions Data 28
Exists
Versions Data 28
Deleted
Retain Extra28
Versions
Retain Only Version 28
Copy Frequency 1
should work fine.
Regard,
Karel
-Oorspronkelijk bericht-
Van: Henrik Hansson [mailto:[EMAIL PROTECTED]
Verzonden:
I have a question regarding an issue regarding Archiving.
Lets say I have a policy that says that I need to do FULL backups days a
week for 4 weeks.
Ofcourse I can do archive each day but then I think I don't use the
functunallety in TSM.
Is there a way of doing incremental backups that covers 4
Also, what is the "Reuse Delay set to? You could have this set to a number of days
that will keep those tapes as Pri even though the data has expired.
-Original Message-
From: Henrik Wahlstedt [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2003 2:27 AM
To: [EMAIL PROTECTED]
Subje
Hi all,
After Upgrade from 4.2.4 to 5.1.7.3 on an AIX 5.1 Server, I have a problem
with my 3494 Library drives (3590 E1A). I cannot set them offline, I cannot
delete them.
When I try to delete on the message appears :
ANR9798E DELETE DRIVE: One or more paths are still defined for drive DRIVE6
in l
Geetha,
Are you running web browser? or do you see any session with "?" in TSM
Server console - probable causes for CPU 100%.
Further, there is an apar for the cpu 100% problem IC28613.
Ignore the above comments, if you TSM level is above 4.2.1. Pinning of CPU
time by dsmserv happens due to ghost s
Hi gurus,
I am very very new to tivoli.suddenly today dsmserv is occupying 100% of
cpu.the server is installed in sun machine with solaris 8 as OS.Pls
suggest what to do.shld i have to stop and start the server.
I attempted to take a back up of a client whose storage pool was full.
I got the error
Hi gurus,
I am very very new to tivoli.suddenly today dsmserv is occupying 100% of
cpu.the server is installed in sun machine with solaris 8 as OS.Pls
suggest what to do.shld i have to stop and start the server.
I attempted to take a back up of a client whose storage pool was full.
I got the error
Christian,
Thanks for your valuable information.
Thanks
C.R.Chandrasekhar.
Systems Executive.
Tivoli Certified Consultant (TSM).
TIMKEN Engineering & Research - INDIA (P) Ltd., Bangalore.
Phone No: 91-80-5536113 Ext:3032.
Email:[EMAIL PROTECTED]
-Original Message-
From: Christian Bagard
Hello,
Here is the process we use since several years with several customers.
It's for NT.
You will have to adapt it to W2003 XP but the principle is the same.
You can find some informations in redbooks (redpieces drafts 25/09/03) :
* IBM Tivoli Storage Manager: Bare Machine Recovery for Microsoft
Try to make sure that volumes are expired.
-Original Message-
From: Christian Svensson [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2003 2:18 PM
To: [EMAIL PROTECTED]
Subject: From privat to Scratch
What´up iTSMers. :)
I don´t know what i´m doing wrong.
But I got a litle probl
Hello,
check at least folllowing possibly limiting factors:
- how long does it take to create a backupse (simple test it)
- is the restore time eventually limited by the speed the old NAS
can
create files? test it - copy a bunch of small files from a
workstation to NAS
No, try this,
Your empty offsite tapes have Access=Offsite. Check them in with
Status=Private and then Upd vol xxx acc=readw.
//Henrik
Christian Sv
What´up iTSMers. :)
I don´t know what i´m doing wrong.
But I got a litle problem where my privat tapes never going over to scratch tapes.
I have label all tapes to scratch one time and I have checkin more tapes to
scratchspool. I have also change the reuse delay to 1 day. But still is the tapes in
50 matches
Mail list logo