Jorge,
on AIX there is a Journal-based backup for GPFS with a journal daemon process.
Best regards,
Kirsten
-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von Jorge
Amil
Gesendet: Donnerstag, 2. Februar 2012 15:30
An: ADSM-L@VM.MARIST
Hi,
the database backup needs the following configuration:
environment variables:
DSMI_CONFIG=/export/home/dummy/tsmdbmgr.opt
DSMI_LOG=/export/home/dummy
DSMI_DIR=/opt/tivoli/tsm/client/api/bin64
more ./tsmdbmgr.opt
SERVERNAME TSMDBMGR_DUMMY
server stanza in
Hi,
the database backup needs the following configuration:
DSMI_CONFIG=/export/home/dummy/tsmdbmgr.opt
DSMI_LOG=/export/home/dummy
DSMI_DIR=/opt/tivoli/tsm/client/api/bin64
more ./tsmdbmgr.opt
SERVERNAME TSMDBMGR_DUMMY
SErvername TSMDBMGR_DUMMY
COMMmethod TCPip
TCPServeraddress
Hello,
> if we would need a copy-pool-volume on location B, which is actually
> stored at location A 80km away, we could put this tape in a library at
> location A, read the data there and transport it to the TSM-Server at
> location B via our WAN-connection.
If you need a copy-pool-volume at
Hello,
there is a maximum size threshold of 5 G defined at the storagepool TAPE_ORACLE.
The migrated file seems to exceed 5G.
best regards,
Kirsten Glöer
Forschungszentrum Karlsruhe GmbH
Institut für Wissenschaftliches Rechnen (IWR)
Hermann-von-Helmholtz-Platz 1 Tel.: +49 (0)7
Hi,
perhaps a workaround for this APAR is to initiate the migration process several
times.
best regards,
Kirsten Glöer
Forschungszentrum Karlsruhe GmbH
Institut für Wissenschaftliches Rechnen (IWR)
Hermann-von-Helmholtz-Platz 1 Tel.: +49 (0)7247-82-8616
76344 Eggenstein-Leopo
layout for db and log
Hi,
Gloeer, Kirsten schrieb:
> within the performance guide it is recommended to use multiple db
> volumes (4 - 16) and multiple log volumes.
Where did you get the information about using 4-16 volumes? The performance
guide only talks about "multiple" volu
Hi,
within the performance guide it is recommended to use multiple db volumes (4 -
16) and multiple log volumes.
A TSM server database with 195 GB seems to be very large in order to reach high
performance rates.
Isn't it better to split the TSM server in two servers?
best regards,
Kirsten Glöer
t one grabbing the other ones media.
Regards
Neil Sharp <[EMAIL PROTECTED]>,
Technical Support & TSM Consultant
Direct Line : 01256-306686
Mobile: 07811-199312
Office : 01256-811125 Ext 223
Syan Limited, Riverside View, Basing Road,Old Basing, Basingstoke,
Hampshire, RG24 7AL
&
-811125 Ext 223
Syan Limited, Riverside View, Basing Road,Old Basing, Basingstoke,
Hampshire, RG24 7AL
"Gloeer, Kirsten" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" 07/10/2005 10:22
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@vm.maris
Hi,
the 3584 tape library can be configured in several logical libraries.The 4 SCSI
LTO1 drives can be configured
in the first logical library with the control path defined on the first SCSI
LTO1 drive. The 4 FC LTO2 drives
can be configured in the second logical library with the control path d
Hi,
> 1. SDLT volume mounted in SDLT drive and a bit later the move failed with the
> warning ANR1145W (not enough mount points available). All drives and paths were
> online A 'query mount' didn't give any other mount requests.
the problem will be fixed in PTF level 5.2.2.0 with APAR IC37866.
Hi,
it's well described in redbook SG24-6502-01.
best regards,
Kirsten Glöer
-Ursprüngliche Nachricht-
Von: Karel Bos [mailto:[EMAIL PROTECTED]
Gesendet: Mittwoch, 5. November 2003 13:59
An: [EMAIL PROTECTED]
Betreff: Re: Two virtual libraries in one physical (IBM3583)
Hi,
>From the
It's necessary to upgrade to AIX 5.1. Have a look at the installation README:
*
* $$1 AIX OS level correction to Quickstart manual *
Hi Joachim,
We noticed the same with TSM Server V 5.2.1.1 on AIX:
Session established with server HB1: AIX-RS/6000
Server Version 5, Release 2, Level 0.0
Server date/time: 07.10.2003 10:25:01 Last access: 07.10.2003 10:13:23
tsm: HB1>q status
Storage Management Server for AIX-RS/6000 - Ver
Your recovery log is full. Issue
Dsmserv extend log
Best wishes
Kirsten
-Ursprüngliche Nachricht-
Von: Edgardo Moso [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 2. Oktober 2003 15:19
An: [EMAIL PROTECTED]
Betreff: BUF059 Error
My server halted after receiving this error:
10/02/20
Yes, it is feasible, if in the dsmserv.dsk file are
only the mirror volumes inserted und if you use
dsmserv loadformat only with the mirror volumes.
The dsmserv loaddb will inform you whether the
dsmserv auditdb is necessary.
It is possible to unload the database to tape
with library type manual
.
-Original Message-
From: Gloeer, Kirsten [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 19, 2002 3:32 AM
To: [EMAIL PROTECTED]
Subject: Re: Backup NT Server via SAN with Emulex LP8000
We haven't tried it with SCSI drives and NTutil. We've tried it with SAN
drives and NTutil an
a further APAR to the problem:
APAR Identifier .. IC31865 Last Changed 01/11/09
UNABLE TO USE 3494 LIBRARY FOR RESTORE DB. HAVE TO DEFINE DRIVE
WITHIN 3494 AS TYPE MANUAL TO COMPLETE DB RESTORE.
Symptom .. IN INCORROUT Status ... CLOSED PER
Severity ...
CSI drives and NTUTIL and the TSM drivers?
I am guessing not. I am presuming that you have already installed the TSM
SAN agent and configured the drives. If not, then the Magstar driver is in
control.
-Original Message-----
From: Gloeer, Kirsten [mailto:[EMAIL PROTECTED]]
Sent: Monday, Februar
Hi,
is it possible to get the output of a select query from different servers
in one output table?
the query is:
all:select sum(a.backup_mb) as "Backup [MB]",sum(a.archive_mb) as
"Archive [MB]",b.domain_name from auditocc a,nodes b
where a.node_name=b.node_name group by b.
: Gloeer, Kirsten [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 15, 2002 9:37 AM
To: [EMAIL PROTECTED]
Subject: Re: Backup NT Server via SAN with Emulex LP8000
We use this fibre card with WinNT 4 SL6. I tried to use NTutil but without
success. Any hints?
Kirsten
-Original Message
GUI see all the SAN drives (mappings - should be
the same when viewing mappings through explorer)
Joe
-Original Message-
From: Gloeer, Kirsten [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 15, 2002 9:37 AM
To: [EMAIL PROTECTED]
Subject: Re: Backup NT Server via SAN with Emulex LP800
Message-
From: Gloeer, Kirsten [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 15, 2002 6:11 AM
To: [EMAIL PROTECTED]
Subject: Backup NT Server via SAN with Emulex LP8000
Hi,
We have problems to backup a NT Server via SAN with an Emulex LP8000
adapter to a 3494 library with 3590E1A tape drives
G
MAIL: [EMAIL PROTECTED]
TEL:++43/5574/4991-251
FAX:++43/5574/4991-820-8251
> -Ursprüngliche Nachricht-
> Von: Gloeer, Kirsten [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Freitag, 15. Februar 2002 12:04
> An: [EMAIL PROTECTED]
> Betreff: dsmserv restore db pro
parrman
Exist i Stockholm AB
Bergkällavägen 31D
192 79 SOLLENTUNA
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
"Gloeer, Kirsten"
cc:
Sent by: "ADSM: Dist Subject: Re: AW:
dsmserv restore db
820-8251
> -Ursprüngliche Nachricht-
> Von: Gloeer, Kirsten [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Freitag, 15. Februar 2002 12:04
> An: [EMAIL PROTECTED]
> Betreff: dsmserv restore db problem with 3494 libr
>
> Hi,
>
> We have problems to restore a databa
Hi,
We have problems to backup a NT Server via SAN with an Emulex LP8000
adapter to a 3494 library with 3590E1A tape drives. Has anyone tried
this? It is possible to access disks from the NT server via SAN and it
is possible to access the 3590E1A drives via an RS/6000.
Best regards,
Kirsten G
Hi,
We have problems to restore a database with a 3494 library:
ANR0900I Processing options file
/usr/tivoli/tsm/server/bin/dsmserv.opt.
ANR8200I TCP/IP driver ready for connection with clients on port
1550.
ANR0200I Recovery log assigned capacity is 12276 megabytes.
29 matches
Mail list logo