M: Dist Stor Manager" wrote on 03/20/2012
04:14:27 AM:
> From: "Minns, Farren - Chichester"
> To: ADSM-L@vm.marist.edu
> Date: 03/20/2012 04:18 AM
> Subject: Problem with Exchange backups and logs not being deleted
> Sent by: "ADSM: Dist Stor Manager"
>
>
LIVE DEFMC STANDARD317
30 60
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Minns,
Farren - Chichester
Sent: 20 March 2012 08:14
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L
Morning all,
I'm not that clued up on Exchange so I'm not sure if this is a TSM or Exchange
issue.
Basically, we have 20 Storage Groups and up until recently backups have been
running fine (have been for years). But just recently I was alerted to the fact
that four of the storage groups (coinc
:47
Ärende: Re: [ADSM-L] Best way to check size of TSM Client ?
Am 15.02.2012 10:38, schrieb Minns, Farren - Chichester:
> Hi All,
>
> What is the best way to get a list of all client nodes and how much disk
> space would be required for a rebuild?
>
> I'm not looking
Hi All,
What is the best way to get a list of all client nodes and how much disk space
would be required for a rebuild?
I'm not looking for the total amount of data in backup, but how much data each
client actually has on it (roughly) currently?
Farren
-
correct syntax:
tdpexcc backup "4B StorageGroup" incr /tsmoptfile=dsm.opt
/logfile=excsch_4B.log /excserver=chi-mb >> excincr_4B.log
Thanks,
Del
"ADSM: Dist Stor Manager" wrote on 01/04/2012
06:40:27 A
Minns, Farren
- Chichester
Verzonden: woensdag 4 januari 2012 12:40
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: How to run a manual Exchange backup ?
Hi all,
I need to run a full exchange backup against just one Exchange storage group.
The current command that backs up all groups is as follows :-
td
ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Minns, Farren
- Chichester
Verzonden: woensdag 4 januari 2012 12:40
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: How to run a manual Exchange backup ?
Hi all,
I need to run a full exchange backup against just one Exchange storage group.
T
And of course I meant
tdpexcc backup '4B StorageGroup' incr /tsmoptfile=dsm.opt
/logfile=excsch_4B.log /excserver=chi-mb >> excincr_4B.log
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Minns,
Farren - Chichester
Sent: 04
Hi all,
I need to run a full exchange backup against just one Exchange storage group.
The current command that backs up all groups is as follows :-
tdpexcc backup * incr /tsmoptfile=dsm.opt /logfile=excsch.log /excserver=chi-mb
>> excincr.log
To back up just one group (in this case cal
Thanks Richard (and all),
It's an odd server in that I was asked to exclude everything and then just
start adding bits in (as it's remote, large, and the transfer rate is
terrible!).
Anyway you were correct, it was a simple domain statement issue.
All sorted now
Thanks to all and a Merry Xma
Morning all
I'm trying to add a filesystem back in to the a Solaris client backup.
The filesystem is called /u03
I assumed ...
include /u03/.../*
... would work but it doesn't.
What am I doing wrong ?
Farren
-
-L@VM.MARIST.EDU] On Behalf Of Minns,
Farren - Chichester
Sent: Monday, December 12, 2011 12:01 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Problems backing up Linux client - missed filesystem
OK, thanks for the advice.
Regards
Farren
-Original Message-
From: ADSM: Dist Stor
OK, thanks for the advice.
Regards
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of Thomas
Denier
Sent: 12 December 2011 16:49
To: ADSM-L@vm.marist.edu
Subject: Re: [ADSM-L] Problems backing up Linux client - missed filesystem
-F
Hi All
TSM Server 5.5.2.0 on Solaris
Linux Client 5.5.0.0 - Real Application Cluster v6
I have the following issue. When the backup runs as a scheduled service it only
checks/backs up the /boot filesystem.
I put the following in dsm.sys and that certainly allows me to run manual
backups
Ah ok, thanks Richard
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Richard Sims
Sent: 22 September 2011 12:41
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] dsmserv.err not being written to
It's not an issue: the server error log
Hi all
I am still trying to figure out why I'm seeing intermittent drive faults, but
have noticed that the dsmserv.err log is not getting written to (and hasn't
been for a long time).
TSM 5.5.2.0 on Solaris 2.9
Has anyone else had a similar issue?
Any ideas why the log isn't being written to?
Hi Guys
Still mopping up after the power cut at the weekend :-(
I'm still having issue where intermittently, TSM stop being able to access al
the drives. However, I 'think' I have narrowed the problem down to a specific
drive.
Now, when I'm looking at tape mounts during a backup of tapepool to
rrman
Exist i Stockholm AB
Växel: 08-754 98 00
Fax: 08-754 97 30
daniel.sparr...@exist.se
http://www.existgruppen.se
Posthusgatan 1 761 30 NORRTÄLJE
-"ADSM: Dist Stor Manager" skrev: -
Till: ADSM-L@VM.MARIST.EDU
Från: "Minns, Farren - Chichester"
Sänt av: "ADSM:
Till: ADSM-L@VM.MARIST.EDU
Från: "Minns, Farren - Chichester"
Sänt av: "ADSM: Dist Stor Manager"
Datum: 09/20/2011 11:13
Ärende: [ADSM-L] Issue with tape drive - TSM Polling it but can't access it
(TSM 5.5.2.0)
Hi All
Been ages since I have been on here as I don't
Hi All
Been ages since I have been on here as I don't really have a lot of dealings
with TSM these days but this issue has come my way :-/
Basically, a 3592E drive in our 3494 library cannot be seen by TSM (it just
keeps polling). This has occurred since a power outage at the weekend (don't
as
q fi f=d".
You will avoid a lot of problems with cpecial characters in filespace name.
Grigori G. Solonovitch
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Minns,
Farren - Chichester
Sent: Monday, May 16, 2011 12:10 PM
To: ADSM-L@VM.MA
Hi all
I'm trying to delete the following filespace and having no luck at all.
The command I'm using is as below and I'm not getting any joy.
Any ideas?
Regards
Farren
delete filespace CHI-AS-SCCMEUR
CHI-AS-SCCMEUR\SystemState\NULL\SystemState\SystemState type=any namet=uni
Node Name:
Hi all
Running TSM 5.5.2.0 on Solaris 9
I have started to see a problem now where the expiration process seems to get
caught in some kind of loop where the log volume starts to fill up. At this
point if I cancel the process it can sit there for over an hour with the log
getting more and more f
Re below, sokay I found it :-)
Regards
Farren
Hi All
It's been a while since I dabbled with TSM.
Can someone tell me how to check the retention settings for archived data
please as I can't find the info.
Regards
Farren Minns
-
Hi All
It's been a while since I dabbled with TSM.
Can someone tell me how to check the retention settings for archived data
please as I can't find the info.
Regards
Farren Minns
John W
a Mac client
Have you considered creating a normal Incremental schedule and using
-opt='-incrbydate' flag?
This seems to be far less error prone?
On 7 okt 2010, at 13:56, Minns, Farren - Chichester wrote:
> Hi all, I wonder if you can help.
>
> I need to schedule a Mac c
19 78
e-mail: arnaud.br...@panalpina.com
**
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Minns,
Farren - Chichester
Sent: jeudi 7 octobre 2010 15:36
To: ADSM-L@VM.MARIST.EDU
Subject: Re: How to run a command for a
was
accompanied by a version-release numbering element.)
Richard Sims
On Oct 7, 2010, at 8:38 AM, Minns, Farren - Chichester wrote:
> Hi Richard
>
> I was just using double quotes, so now use single and double.
>
> The schedule looks as follows and still fails with "ANR2579E S
Hi Richard
I was just using double quotes, so now use single and double.
The schedule looks as follows and still fails with "ANR2579E Schedule
MACSERVERS in domain STANDARD for node CHI-XS02 failed
(return code 127)."
Policy Domain Name: STANDARD
Schedule Name: MACSERVERS
Hi all, I wonder if you can help.
I need to schedule a Mac client to do a daily incrbydate backup.
On the client I have created a file called daily-incrbydate.sh with the single
line "dsmc incremental -incrbydate" in.
If I run this directly it works fine, but when I try to create a schedule on
se
Firefox and occasionally Chrome. I can get to
ftp://index.storsys.ibm.com/tivoli-storage-management/ in FF just fine. I
prefer to use an FTP client for this kind of download/server but FF works
fine? Are you using the latest, 3.6.3?
From:
"Minns, Farren - Chichester"
To:
ADSM-L@VM
that space (manually in the address bar) and see
if you can browse then - it gets old after a while, so I switch back to IE
just for browsing these folders.
//DMc
London, UK
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Minns, Farren - Chich
Hi all
I usually go to ftp://index.storsys.ibm.com/tivoli-storage-management for
client downloads but since I tried on Friday (I haven't been there for a while)
I get the following error when trying to go into maintenance etc.
550 /tivoli-storage-management/ maintenance: No such file or directo
Hi All
Is there an easy way to work out how many cpus/cores are being backed up with
TSM?
Or do I have to go to each and every single client and check manually?
Regards
Farren
John W
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Minns,
Farren - Chichester
Sent: Monday, September 28, 2009 4:28 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Age-old licensing question
Hi all
I know I started this in a reply to my backing up of virtual machines bit
thought it be
Hi all
I know I started this in a reply to my backing up of virtual machines bit
thought it best to start a new thread.
My simple question is... how do I find out how much licensing costs? :-)
I know it's not that simple though.
My basic questions are this...
1) do I need to use the PVU calcu
Hi all
Can someone point me to a licensing document as I'm trying to get some costings
for backing up clients either individual, via VM, both etc.
I seem to be finding bits and pieces of information but I need something a bit
more self-contained.
Regards
Farren
--
Hi all
Thanks for the information. Gives me plenty to think about.
Regards
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Buddy
Howeth
Sent: 25 September 2009 15:16
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Backing up virtual
> Re: Mac Client Still being severed. Why?
>
> Minns, Farren - Chichester
>
> to:
>
> ADSM-L
>
> 09/08/2009 11:02 AM
>
> Sent by:
>
> "ADSM: Dist Stor Manager"
>
> Please respond to "ADSM: Dist Stor Manager"
>
> Hi
>
> I have
[mailto:ads...@vm.marist.edu] On Behalf Of
Richard Sims
Sent: 08 September 2009 17:16
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Mac Client Still being severed. Why?
On Sep 8, 2009, at 11:50 AM, Minns, Farren - Chichester wrote:
> Right, the backup failed again and there is a single message
Right, the backup failed again and there is a single message in the error log.
09/08/2009 16:45:08 B/A Txn Consumer thread, fatal error, signal 10
Anyone seen that before ? :-)
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Richard
Thanks Richard.
Running a new backup now and going to see if anything obvious jumps out.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Richard Sims
Sent: 08 September 2009 16:29
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Mac Client Sti
one that goes unasked.
The command line is your friend.
"Good enough" is the enemy of excellence.
"ADSM: Dist Stor Manager" wrote on 09/08/2009
11:01:19 AM:
> [image removed]
>
> Re: Mac Client Still being severed. Why?
>
> Minns, Farren - Chichester
>
> to
st Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Remco
Post
Sent: 08 September 2009 16:10
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Mac Client Still being severed. Why?
On 8 sep 2009, at 17:01, Minns, Farren - Chichester wrote:
> Hi
>
> I have been logging onto the serve
it doesn't go to
sleep.
SF
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Minns,
Farren - Chichester
Sent: Tuesday, September 08, 2009 10:38 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Mac Client Still being severed. Why?
Hi all
Run
gards
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Remco
Post
Sent: 08 September 2009 15:52
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Mac Client Still being severed. Why?
On 8 sep 2009, at 16:37, Minns, Farren - Chichester wro
Hi all
Running TSM Server 5.5.2.0 on Solaris and having a problem with just one of our
Mac Clients.
The Mac Client is running TSM Client 5.4.3.0 (the OS is version 10.4.11).
My problem is that both scheduled and manual backups fail after approx an hour
(running a few more tests to see if it's
Hi all
Has there been a date set where the 5.5 server support will end?
Regards
Farren
This email (and any attachment) is confidential, may be legally privileged and
is intended sole
Hi all, a few questions for you.
When upgrading from TSM 5.4 to 5.5 (on Solaris 9), do I need to:-
uninstall/reinstall the TIVsmSlic package?
delete or rename the nodelock file?
As I use disaster recovery manager I assume I just have to register tsmee.lic?
Do I not have to register a specific
and magic.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Minns, Farren - Chichester
Sent: Thursday, June 18, 2009 7:02 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] How do I check IBMTape and lmcpd driver levels?
Hi all
On Solaris 9, How do I
Hi all
On Solaris 9, How do I check what IBMTape and lmcpd driver levels I'm currently
running with?
Regards
Farren
This email (and any attachment) is confidential, may be legally privi
things are good before turning it
back on. Less of a chance of something happening if you have to back off to
the previous release.
Bill Boyer
"A penny saved is a government oversight." - ??
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] O
Hi all
Does anyone have a list of procedures to follow if needing to revert to a
previous version of TSM after an upgrade. I am running a single server install
with about 70 clients.
I'm going from 5.4 to 5.5 in the next couple of weeks, and though I don't
foresee any issue I need to make sure
Hi all
Can anyone point me to a list of required operating system patches to run TSM
5.5 on Solaris 9?
Thanks
Farren
This email (and any attachment) is confidential, may be legally privi
Hi all
I know I asked this question before but I still have not found a clear answer.
Is there a list of the required OS patches to run TSM 5.5 on Solaris 9?
I have found all the other information I need, but not that bit.
Regards
Farren Minns
--
Well said.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Richard Sims
Sent: 03 June 2009 12:03
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] PLEASE READ BEFORE POSTING
Sorry, Preston, but your presumption to impose this "requirement" on
AD
Aha, that's a much better way to go.
Wonderful!
Many thanks
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Richard Sims
Sent: 01 June 2009 12:06
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Anyway to prevent an unwanted large bac
Hi all
I have been informed that 2Tb of external storage that is attached to one of
our Mac clients is having to be un-mounted, and mounted to a new Mac server
requiring that I back up the whole lot again (and this isn't the first time!!).
So, is there anything I can do to prevent this or is a
Better and better :-)
Thanks people
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Steven
Langdale
Sent: 29 May 2009 10:27
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM 5.5 and Client Compatability?
Hello
I'm also running 5.3
Wonderful, that's exactly what I wanted to hear :-)
Regards
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Björn
Rackoll
Sent: 29 May 2009 09:36
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM 5.5 and Client Compatability?
Hi Fa
y to fix it.
>
> Servers and clients prior to 5.4 are no longer "supported" by Tivoli.
> (there
> is an exemption for the last 5.3 WIn2K client, which is another
discussion)
> They still work. But if you want Tivoli to help you with a problem at
the
> unsupported lev
tigate/try to fix it.
>
> Servers and clients prior to 5.4 are no longer "supported" by Tivoli.
> (there
> is an exemption for the last 5.3 WIn2K client, which is another discussion)
> They still work. But if you want Tivoli to help you with a problem at the
> unsupp
Hi All
I'm still running TSM 5.4 on Solaris and need to move to 5.5.
I have been looking at the Server/Client Compatibility matrix and am still a
little unclear what is supported. I have always been used to the idea that two
levels back for client code should be ok. Is this still the case? i.e.
istian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Minns, Farren -
Chichester [fmi...@wiley.com]
Skickat: den 23 februari 2009 16:32
Till: ADSM-L@VM.MARIST.EDU
Ämne: TSM 5.5 on Solaris Patches question?
Hi all
Where can I find a list of necessary OS patches etc for
Hi all
Where can I find a list of necessary OS patches etc for upgrading from TSM 5.4
to 5.5 on Solaris 9?
Regards
Farren
This email (and any attachment) is confidential, may be legally
sabled for incremental exchange backups to work.
On 24 dec 2008, at 10:09, Minns, Farren - Chichester wrote:
> Hi Guys
>
> Running TSM 5.4.1.2 on Solaris, backing up Exchange via TDP
>
> Normally we run daily full backups, and then just incremental at the
> weekend, and this had al
Hi Guys
Running TSM 5.4.1.2 on Solaris, backing up Exchange via TDP
Normally we run daily full backups, and then just incremental at the weekend,
and this had always been working fine. Then, last Sunday some work was done to
move mail boxes out of one storage group and into a new one (I was not
alf Of
Richard Rhodes
Sent: dinsdag 16 december 2008 18:05
To: ADSM-L@VM.MARIST.EDU
Subject: Re: The Intergrated Solutions Console BAD performance.
We quite using it a long time ago, and won't try again until TSM v6.1 comes out.
"Minns, Farren
Hi all (running TSM 5.4.1.2 on Solaris) ... Solutions Console 6.0.1
Whilst I try to use the ISC as little as often there are times when it would be
handy, especially when I'm out of the office and someone is covering me.
At present I have it running on a Solaris box with lots of free memory and
t Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag =
von
Minns, Farren - Chichester
Gesendet: Dienstag, 25. November 2008 11:57
An: ADSM-L@VM.MARIST.EDU
Betreff: [ADSM-L] Question about group collocation
Hi all
I currently have a tapepool collocated by node.
I have created my first collocation g
Hi all
I currently have a tapepool collocated by node.
I have created my first collocation group and added three client nodes to it.
So, if I now update the tapepool to collocate by 'group', am I right in
thinking it will still collocate all nodes NOT in the collocation group by node?
Thanks
they should disappear from the
DRM plan.
Phil
From: Minns, Farren - Chichester [mailto:[EMAIL PROTECTED]
Sent: Thu 20/11/2008 12:09
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Old copypool data question
OK, that's cool, I guess I'm in good
] Old copypool data question
Hi Farren
TSM will still list the data on the old 3590 pool as you can have multiple copy
pools.
Once you have deleted the data on the 3590 vols they should disappear from the
DRM plan.
Phil
From: Minns, Farren - Chichester [mailto
ist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
> Of Minns, Farren - Chichester
> Sent: Thursday, November 20, 2008 6:55 AM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] Old copypool data question
>
> Thanks Rainer
>
> But I'm wondering if I'm still in a
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
> Of Minns, Farren - Chichester
> Sent: Thursday, November 20, 2008 6:27 AM
> To: ADSM-L@VM.MARIST.EDU
> Subject: [ADSM-L] Old copypool data question
>
> Hi All
>
> A few months ago I renamed our old copypool
a macro
del.mac
consisting of lines like
'del vol xxx discardd=yes wait=yes'
... for every volume in that old copy-pool
you easily start that macro from a dsmadmc-shell using the '-itemcommit'
option
as 'macro del.mac'
regards
Rainer
Minns, Farren -
Hi All
A few months ago I renamed our old copypool and created a new one with a new
device class to make use of our 3592 tape drives.
So I now have lots of 3590 copypool volumes with data on them, and I want to
move them to the new 3592 media.
What is the best way to do this?
Many thanks in a
n.svensson
Från: ADSM: Dist Stor Manager [EMAIL PROTECTED] för Minns, Farren -
Chichester [EMAIL PROTECTED]
Skickat: den 23 september 2008 12:00
Till: ADSM-L@VM.MARIST.EDU
Ämne: Slow TSM Client after Symantec installation
Hi All
Last weekend, an administrator
Cell: +46-70-325 1577
E-mail: [EMAIL PROTECTED]
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [EMAIL PROTECTED] för Minns, Farren -
Chichester [EMAIL PROTECTED]
Skickat: den 23 september 2008 12:00
Till: ADSM-L@VM.MARIST.EDU
Ämne: Slo
TSM Cluster Scheduler Question
Hi Farren
Yes that's correct
From: Minns, Farren - Chichester [mailto:[EMAIL PROTECTED]
Sent: Wed 02/07/2008 12:29
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
Thanks Phi
uster Scheduler Question
Hi Farren
Yes that's correct
____
From: Minns, Farren - Chichester [mailto:[EMAIL PROTECTED]
Sent: Wed 02/07/2008 12:29
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
Thanks Phil, I have now locat
drive backups then you
can do this in the same manner as a non-cluster server.
cheers
Phil
From: Minns, Farren - Chichester [mailto:[EMAIL PROTECTED]
Sent: Wed 02/07/2008 10:19
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
Hi all
anager [mailto:[EMAIL PROTECTED] On Behalf Of
Minns, Farren - Chichester
Sent: den 1 juli 2008 11:31
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM Cluster Scheduler Question
Hi All
TSM 5.4.1.2 on Solaris 2.9
Backing up Exchange (MS Windows Server 2003, RC2 SP") - 5.5.0.0 in a
clustered enviro
uires two nodenames.
Thanks
Henrik
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Minns, Farren - Chichester
Sent: den 1 juli 2008 12:10
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
Hi Henrik,
.
Update PW on both cluster nodes.
"what does the Cluster Scheduler actually do?"
Backing up Exchange? :-) You will find the answer if you search on the
nodename and schedule in TSM.
//Henrik
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] O
the
nodename and schedule in TSM.
//Henrik
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Minns, Farren - Chichester
Sent: den 1 juli 2008 11:31
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM Cluster Scheduler Question
Hi All
TSM 5.4.1.2 on Solaris 2.
Hi All
TSM 5.4.1.2 on Solaris 2.9
Backing up Exchange (MS Windows Server 2003, RC2 SP") - 5.5.0.0 in a clustered
environment.
We had this set up by an outside company and are now seeing some problems with
the TSM Cluster Scheduler automatically failing over the cluster due to a
password issue
D] On Behalf Of goc
Sent: 11 June 2008 10:36
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Total Data Stored by TSM?
select sum(PHYSICAL_MB) MB from occupancy
On Wed, Jun 11, 2008 at 11:08 AM, Minns, Farren - Chichester
<[EMAIL PROTECTED]> wrote:
> Hi all
>
> What is the command to
Hi all
What is the command to run (if there is one) to find out the total amount of
data currently stored by a TSM server, or can it only be done via an SQL script?
Thanks in advance
Farren Minns
--
Hi
Well I received your post, so I don't think there is a problem with the list.
Thanks
Farren
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Richard
van Denzel
Sent: 19 May 2008 09:49
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Problems with
Hi Guys
It's not my week for databases sadly. Today I had a failed incr Exchange backup
and found the following on the IBM site. As such, I am now running a full
backup which is working fine. But, I'm still not understanding exactly why this
is happening.
Can anyone enlighten me?
This was the
Regards
Jeff White
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Minns, Farren; Chichester
Sent: 31 January 2008 10:56
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] A TSM DB2 API question
Good morning all
I am trying to track down why certain DB2 to TS
Good morning all
I am trying to track down why certain DB2 to TSM backups are failing rather
regularly. I don't believe it's a TSM issue and would point the finger at DB2
not being able to quiesce the datafiles in question etc.
However, where do I find logging for this kind of thing? Is there a
3592 primary pool and enter a MIGRATE
command.
Anything that isn't already in your new 3592 copy pool will need to be
copied there. But it won't be copied there more than once no matter how
many BACKUP STGPOOL commands you enter.
On 1/30/08, Minns, Farren; Chichester <[EMAIL PROTE
[mailto:[EMAIL PROTECTED] On Behalf Of
Minns, Farren; Chichester
> Disk BACKUPPOOL migrating to 3592 TAPEPOOL with a 3590 COPYPOOL.
>
> I needed to create a new 3592 COPYPOOL as the number of 3590 off-site
> tapes being sent each day was getting too large.
>
> I marked the original TA
Hi all
A little background. Up until recently I had the following setup.
Disk BACKUPPOOL migrating to 3592 TAPEPOOL with a 3590 COPYPOOL.
I needed to create a new 3592 COPYPOOL as the number of 3590 off-site tapes
being sent each day was getting too large.
So here is what I did.
I marked the
97 matches
Mail list logo
