Andy,
I have yet to see that API installation issue; I would probably try to
install the TDP & Agent on another w2k3 x64 host to figure out whether
the issue is related to a potential corrupted host image build or to
corrupted installation files. One other option could be to get rid of
any registr
Sam,
I came across that particular issue in the past. If you are using the
GUI to perform your file-level NDMP restore then that's your problem!!!
If you want to have restore performance similar to that of your backup
then perform the restore via the CLI. It'll be a LOT faster. You may
create vir
Gary,
The Tivoli 5.5/6.1 Information Center would be the best place to start.
>From this link:
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp on the
left frame, click then expand the "Storage Manager For Mail" & "Storage
Manager for Databases" links. There you will find the PDFs
Joni,
Yes, you can add the snapshotproviderfs=NONE option to your archive
schedule or you can simply add it in the dsm.opt/dsm.sys files and run
the schedule without that option. Does your customer realize that the
-snapshotproviderfs=NONE is the default option and that it does not need
to be adde
John,
The errors you are experimenting with VSS have nothing to do with TSM
rather the host. Deleting the filespace won't do you any good. Try the
steps in this post:
http://www.mail-archive.com/adsm-l@vm.marist.edu/msg83546.html
Good luck.
BERTAUT TCHUISE
TSM/NetApp Storage Engineer
Legg Mason
Grigori,
I ran into an issue "somewhat" similar to yours during the TSM 6.1
install; it was resolved by simply installing both English languages
files and ensuring that the symbolic links to the languages filesets
were correct. You may have done this during your installation but I
didn't see any m
Richard,
The rc 50 could be caused by numerous scenarios (TCPPort change, flakey
cables, faulty hardware). You could run a "Tracert
IP/HOSTNAME_TSM_SERVER" to see where there could be data
loss/connectivity issue between the client and TSM server.
As far as listing the specific TCP address, you c
Zhang,
It is good practice to validate the policyset before activating it.
After updating the copygroup, run validate po DOMAIN_NAME
POLICYSET_NAME.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Message-
Fr
Server
Any ideas?
Mario
From: "Tchuise, Bertaut"
To: ADSM-L@VM.MARIST.EDU
Sent: Wed, December 16, 2009 12:14:26 PM
Subject: Re: TDP for Exchange 2007 scenario
Mario,
The specific service pertaining to the ACN5237E TDP error I was referring to is
the
Microsoft Exchange System Attendant
Microsoft Exchange Transport Log Search Microsoft Search (Exchange)
Mario
____
From: "Tchuise, Bertaut"
To: ADSM-L@VM.MARIST.EDU
Sent: Wed, December 16, 2009 11:33:36 AM
Subject: Re: TDP for Exchange 2007 scenario
Mario,
>>>ACN5241E The Microsoft Exchange Information Store is currently not
>>>running.<<<
Ensure that the Information Store service is up and running then execute the
tdpexcc query exchange and tdpexcc query tsm to check your configuration.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Le
Gugu,
Running the installation in console mode rather than wizard mode will
take care of the stack trace message you are getting below.
TDP-Oracle64.ppc64.bin -i console will work
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
Robert,
Yes, there is a workaround to backup the default Windows OS exclusion; that
involves making changes in the registry (you shall play with the registry at
your own risk). The registry location for all OS exclusions is at
HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup
Mehdi,
>From the client side, are there any entries in the dsmsched and dsmerror
log files from stopping and restarting the TSM Central Scheduler
service? You could update/delete then redefine the TSM Central Scheduler
from the GUI then check the dsmsched and dsmerror log files.
>>>Another issue
Gary,
The way we backup MS clusters in our environment is very similar to
Grigori's procedure. Every node in the cluster backs up its own local
resources under its own TSM Central Scheduler; for the sake of
organization, you could create a separate node under the Cluster Manager
name to backup onl
Fred,
>From my previous experience, changing the bufpoolsize within TSM didn't
require a reboot; I used the "setopt BUFPOOLSIZE" command to perform the
change.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Mess
ns
at such random times. First, I'll apply these hotfixes. Are they any
others to apply?
Thanks!
Sergio
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Tchuise, Bertaut
Sent: Thursday, October 15, 2009 1:19 PM
To: ADSM-L@VM.MARIST.EDU
Subjec
Sergio,
What specific error messages pertaining to TSM do you see in the
dsmerror.log file? While running vssadmin list writers, are there any
writers that show state of failure?
Thanks.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggma
Erwin,
You could run q vol f=d; you could also run this SQL query,
feel free to improve the query as needed.
select volume_name, stgpool_name, pct_utilized, last_write_date from
volumes where volumes.stgpool_name in ('STORAGEPOOLNAME') and
volumes.volume_name in ('VOLUMENAME')
BERTAUT TCHUISE
T
Ashish,
Changing the serialization parameter in your backup copygroup definition
from shrstatic or static to shrdynamic or dynamic will force TSM to
backup open files; HOWEVER, there is no guarantee that you will be able
to make use of the backed up open files in the case of restore.
You should N
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Remco Post
Sent: Monday, October 12, 2009 8:45 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] snapdiff
Andy,
A teammate successfully implemented snapdiff in our storage environment.
He used the 6
Grigori,
It may not be what you want but have you tried setting logging within
the Daily.bat file? I run multiple command schedules on numerous
clients; I made my life easier by having the batch file write to a log
file so I had a simplified object in the actual schedule.
My object would look lik
, Tchuise, Bertaut wrote:
> David,
>
> You will need to update the client option in your clientoptset with
> FORCE=NO to allow the client to override the value.
>
> BERTAUT TCHUISE
> TSM/NetApp Storage Administrator
> Legg Mason Technology Services
> *410-580-70
override it?
>>> "Tchuise, Bertaut" 10/1/2009 2:19 PM
>>> >>>
David,
You will need to update the client option in your clientoptset with
FORCE=NO to allow the client to override the value.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Te
David,
You will need to update the client option in your clientoptset with
FORCE=NO to allow the client to override the value.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Message-
From: ADSM: Dist Stor Ma
Steve.
While performing restore into the Recovery Storage Group, you want to ensure
that you add the database for the SG and MS that you are trying to restore to
your RSG. You do those steps with the Exchange management console; after
creating the RSG, right-click on it and select Add database
, 2009 3:37 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] VSS Error
Thank you, everything worked properly.
2009/9/29 Tchuise, Bertaut
> Bruno,
>
> VSS tends to be fickle at times on Windows system. I have resolved
> numerous VSS issues on W2k3 but none on W2k8 so far; the issues l
Bruno,
VSS tends to be fickle at times on Windows system. I have resolved numerous VSS
issues on W2k3 but none on W2k8 so far; the issues lies within Windows not TSM.
You could try the following steps:
** Run the "vssadmin list writers" then check the state of your writers. If you
have any wri
When there is no active version of the file :-)
On a serious note, the TSM server will only have inactive versions of a
file once the file is deleted from the client and the next incremental
backup runs.
BERTAUT TCHUISE
TSM/NetApp Storage Administrator
Legg Mason Technology Services
*410-580-7032
Hi,
I would first check to make sure that there is no issue with VSS on that
specific box. One way is to run a manual backup of the system state (or
just use ntbackup) then check the Event Viewer for specific errors.
Another thing you could do is to enable tracing on the client then check
the file
Douglas,
I extensively used the link below to configure ITM V6.2 in our QA environment;
it contains about all the information pertaining to the different components of
ITM including the TEP. On the left frame under "IBM Tivoli Monitoring" expand
"Version 6.1" then go through "Installing and Con
Duane,
You may find worthy to take a look at LAN-Free backups configurations.
This would not only alleviate the load on your bandwidth but also
decrease the backup duration.
That may or may not work for you but wouldn't hurt to look into it.
Good luck.
BERTAUT TCHUISE
TSM/NetApp Storage Adminis
Michael,
Thanks for the Monday morning laugh about Windows :)
Yudi, if you want to install Perl on your windows box and take a bite at
Michael's script; you can install Active Perl 5.10
(http://www.activestate.com/activeperl/) then you could create and run
Perl script from that "little back windo
rom: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Tchuise, Bertaut
Sent: Friday, August 21, 2009 10:30 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM Data Protection for SQL - Scheduler
Tiago,
To schedule backups of the SQL databases, you will need to do the
followings
* In T
Tiago,
To schedule backups of the SQL databases, you will need to do the
followings
* In TSM define 2 "COMMAND" schedules; one to perform the DIFF or INCR
TDP backup (daily will work) and the other to perform the FULL backup
(weekly will work). Here is an example of how your FULL schedule will
loo
Hello Larsa,
I haven't installed the TOR on Window 2008 yet; you may want to check that the
account you are using to generate the TOR reports did not expired or got
locked. Restart the TSM Rept Service (Hey this is Windows, what do you expect?)
then give it another shot.
If all that doesn't wo
Hey Joni,
The "testflag disablenqr" has now been replaced with "disable nqr
no/yes". The "testflag disablenqr" does nothing (see link below).
http://www-01.ibm.com/support/docview.wss?uid=swg21319732
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
btchu
ady set in
dsm.opt.
Much appreciated,
Matthew
On Wed, Aug 12, 2009 at 1:12 PM, Tchuise, Bertaut <
btchu...@lmus.leggmason.com> wrote:
> Matthew,
>
> I never came across this error message during NDMP backups. What do
> your "q node NETAPPFILER_NAME_DEFINED_IN_TSM type=nas
Matthew,
I never came across this error message during NDMP backups. What do your
"q node NETAPPFILER_NAME_DEFINED_IN_TSM type=nas f=d" and "q datamover
NETAPPFILER_NAME_DEFINED_IN_TSM type=nas f=d" look like?
Rather than using the web GUI, have you tried using the command line
using a TSM accoun
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
g.solonovi...@bkme.com
Please consider the environment before printing this Email
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Tchuise, Bertaut
Sent: Monday, August 10, 2009 3:42 PM
To
Grigori,
Regarding the points you made below:
>>> It is impossible to use MOVE DATA, because it is working with volume
level and each DISK volume contains data of many nodes <<<
You won't be able to move data if you are trying to move data from any
primary storage storage pool to a secondary stora
t: Re: [ADSM-L] Move data(file space)
Thank you. One more thing; if the storage pool 1 says that is only 50%
full, what should I set the low and high migration threshold?
>>>
From: "Tchuise, Bertaut"
To:
Date: 8/5/2009 8:47 AM
Subject: Re: [ADSM-L] Move data(file space) Ramiro,
Ramiro,
I sent the previous post prior to your answer below. The move data
operation will work as well; I would rather work with the migration
operation. You mentioned that pool1 didn't appear to be migrating;
granted that you have enough tape drives available, you could increase
the migration pro
Ramiro,
You can make use of the migration process to move the data from a
storage pool that's getting full to another. You can use the ISC for
that and set the High and Low migration threshold for the data movement.
If you have access to the administrative client (dsmadmc), you can logon
to the TS
Lori,
You could be having connectivity issues with your drives. On this post,
you stated 2 drives went offline, on the most recent, there were 3
drives offline. First, check for any defective cabling on the tape
drives. If the first step doesn't lead any conclusive results, you can
make use of the
Stefan,
I am afraid you can't generate a new TOC out of the previously backed up
NDMP data. You may want to implement copypool for your NDMP TOC storage
pool as well as data so that you can restore it with the restore stg
TOC_STORAGE_POOL command.
BERTAUT TCHUISE
Storage Support Administrator
Leg
.
Thanks though
On Fri, Jul 31, 2009 at 2:19 PM, Tchuise, Bertaut <
btchu...@lmus.leggmason.com> wrote:
> Hello Matthew,
>
> Have you tried using the forcesync=yes parameter with the upd server
> command?
>
> Thanks.
>
> BERTAUT TCHUISE
> Storage Support Administr
Hello Matthew,
Have you tried using the forcesync=yes parameter with the upd server
command?
Thanks.
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.mari
Hi Mehdi,
It is recommended to specify the sequence while ordering labels so you
don't have tapes with the same labels. While "labeling in" or "checkin
in" pre-labeled tapes in the library, you will need to know the label
sequence or at least the range. Past that, TSM will manage the tapes
based o
Kb/Sec
07/29/2009 17:20:16 Total bytes transferred: 28,981,248
07/29/2009 17:20:16 Elapsed processing time: 6.95 Secs
07/29/2009 17:20:16 ACO0151E Errors occurred while processing the
request.
--
Warm regards,
Michael Green
On Wed, Jul 29, 2009 at 5:08 PM, Tchuise,
doesn't seem to work.
--
Warm regards,
Michael Green
On Wed, Jul 29, 2009 at 3:59 PM, Tchuise, Bertaut
wrote:
> Michael,
>
> You could try explicitly specifying the databases to backup on your
> sql server by listing them in your tdpfull and/or tdpincr/tdpdiff
> command
&g
Michael,
You could try explicitly specifying the databases to backup on your sql
server by listing them in your tdpfull and/or tdpincr/tdpdiff command
files: tdpsqlc backup DB1,DB2,DB3 FULL /tsmoptfile=***.opt
/logfile=*.log; that way the test databases won't be included.
Another option is to
Grigori,
Regarding the point made below:
>>1) migration is totally controlled by TSM Server and depends on number of
>>nodes and number of migration processes. I am afraid to overlap migration
>>activity and backup/restore operations.<<
I don't know how big your disk pool is but you should be a
Steve,
The only times app registry keys get deleted are:
1* when the application is being uninstalled
2* when someone manually deletes the key or that someone writes a script
to delete the reg key or that same someone uses the reg delete "path to
the nodename/pwd key" in the command prompt.
The r
Joni,
The link below contain comprehensive information pertaining to Bare
Machine Recovery for TSM V5.5. The link provides steps to recover the
System state in regular clients, domain controllers and much more.
http://www-01.ibm.com/support/entdocview.wss?uid=swg21164812
I hope it helps.
BERTAU
Grigori,
Your process below works; I would have done the same as Christian
Svensson that is migrating all the data off of the Disk storage pool to
the next storage pool (what hierarchy do you have in your environment:
Disk -> VTL -> Tape or Disk -> Tape?? ). Depending on the number of
tape drives
Grigori,
We currently have TSM 5.5 fix pack 2 under AIX so I couldn't tell from
experience which specific issues, if any, there are with 5.5.3 under
AIX. However, in my opinion, the maintenance patches within the same TSM
server version shouldn't cause any issue vs. going from 5.5 to 6.1 for
insta
i
PT Niagaprima Paramitra
Jl. KH Ahmad Dahlan No.25 Kebayoran Baru, Jakarta Selatan 12130
Phone: 021-72799949; Fax: 021-72799950; Mobile: 081905530830
http://www.niagaprima.com
- Original Message -
From: "Tchuise, Bertaut"
To:
Sent: Wednesday, July 22, 2009 7:46 PM
Subject: Re: [A
Mario,
As many have already noted, the reclamation will take care of your issue
and is probably the fastest way; you can also make use of "move data"
with reconstruct=yes on a volume basis.
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmas
di Darmadi
----- Original Message -
From: "Tchuise, Bertaut"
To:
Sent: Wednesday, July 22, 2009 12:42 AM
Subject: Re: [ADSM-L] TDP Exchange Error
Yudi,
After the legacy and VSS full backups, the exchange server deletes the
logs; the logs won't be deleted if the storage gr
Yudi,
After the legacy and VSS full backups, the exchange server deletes the
logs; the logs won't be deleted if the storage groups are not mounted.
Similarly during the legacy incremental backups, the exchange server
deletes the transactional logs after they are being backed up.
Using the command
Vince,
You can make use of dsmadmc within the c:\program
files\tivoli\tsm\baclient directory in windows or
/usr/tivoli/tsm/client/ba/bin directory in AIX to run administrative
commands from the client. The following 2 references will help you learn
more about TSM.
Chapter 10 of the first link spe
Gill,
We have an IBM TS7520 with 10 virtual tapes libraries and 10 drives at
the primary site; we also have an IBM TS7510 with 8 virtual tape
libraries and 10 drives at the secondary site. We don't have any
contention whatsoever with the VTL drives during the backups and TSM
administrative process
Matthew,
When you restart the TSM Central Scheduler for the TDP client, do you
still have the same issue? It is possible that the TUES_INCR schedule
was disassociated from the QBCWSWIEPOO1-EXC client; it is possible that
the schedule was renamed, check the schedule associations for the
specific cl
Hey Bill,
The reason you can't query exchange is because the Microsoft Exchange
Information Store service is not running. That service needs to be
started for TDP for Exchange to run; start that service and everything
will be smth.
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason
Zoltan,
You don't need to delete and redefine all connections to the drive being
replaced. All you need to do before a drive change is to make sure that
the drive is not used and that you take the path to the drive offline.
Once IBM replaces the drive (using the same S/N as the replaced drive),
yo
Andy,
Regarding the point made below about writing 100GB exchange files on
smaller VTL volumes, you are probably aware of this but you could make
use of the maximum size threshold parameter on the VTL storage pool. Any
data whose size matches or exceeds the threshold will be sent straight
to the n
Andy,
John D. and Mario raised good points. As for our VTL environment, we
have a blend of IBM TS7520/7510 (3955 & 3954 Machine Types). We make use
of "expandable" virtual volumes with an initial size of 5G and a max
size of 60G and it works well in my opinion.
With Compression enabled, we get mor
Hello Bill,
Granted that have the appropriate trust relationships configured between
the domains, appropriate firewall rules and efficient performance
tuning, you can backup clients residing in a domain different to that of
your TSM server. In our Storage environment, we backup numerous clients
in
Hi Pavel,
The following SQL command provides an output similar to "q ev * * f=d"
and output it to a file; you can incorporate it into a script if needed.
I ran the query against the "EVENTS" table.
select distinct events.node_name as "Node", events.domain_name as
"Domain Name", events.scheduled_s
This information was provided under the help migrate stgpool command on
the TSM server.
tsm: AIXPROD114>help migrate
3.35 MIGRATE STGPOOL (Migrate storage pool to next storage pool)
Use this command to migrate files from one storage pool to the next
storage pool in the storage hierarchy.
This
Matthew,
The VIEWER id may have simply be hard coded into some script contacting
the TSM server every 10mn. As Richard promptly noted, check any Crontab
jobs running on the box and terminate the one script using the VIEWER id
or simply change that VIEWER id with an existent admin id on the TSM
ser
Hello Rainer, what troubleshooting steps have you performed already? Did
you take a look at the dsmsched.log, dsmerror.log files? Are the backups
following the initial backups initiated? Do the backups run for more
than 24 hours or just hang during processing? Have you recently done
some patching o
Mario,
As a side note with the installation of the latest TSM 6.1 Admin Center, after
installing the ISC make sure to REBOOT the server prior to installing the Admin
Center. You will run into issues if you don't perform the reboot.
Good luck.
BERTAUT TCHUISE
Storage Support Administrator
Legg
Michael,
I imply that by "active" data pool, you are implying primary storage
pool; if that is the case then deleting a primary storage pool volume
with discardd=yes will not only remove data on the primary storage pool
volume but also any copies of the data on the copy pools.
BERTAUT TCHUISE
Sto
cense, but, TSM/IBM does not care how many
servers are virtualized on it.
Thanks,
Bill Evans
Research Computing Support
FRED HUTCHINSON CANCER RESEARCH CENTER
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Tchuise, Bertaut
Sent: Wednesday, June 17,
Eric,
TSM does backup running VMs; for TSM versions prior to 5.5, you had to
backup each individual VM just like you would backup physical servers
(this meant getting a TSM license for each and every VM instance). TSM
V5.5 goes a step further and makes use of the VM Consolidated backup
(VCB) to ac
Ken,
There are some issues in the way current the TSM servers handles the
NDMP backups but in my opinion, they are making great progress with the
upcoming TSM server V6.1 release.
The "Error beginning NDMP backup - illegal arguements.Check that the
filespace/path '/vol/xyz/-' exists." error indic
Gary,
Sorry to hear that you are having issues with ISC.
If ISC is installed on a server within your intranet then I wouldn't
worry as much about the certificate warning; accept it and move on.
I would recommend you clicking over the "Getting Started" section right
under "Tivoli Storage Manager"
Hello,
TSM Client 5.5 is not supported on W2K. Please refer to the link below
to see list of supported OS for versions 5.4 & 5.5.
http://www-01.ibm.com/support/docview.wss?uid=swg21243309
My recommendations:
** use TSM Client 5.3 (no longer under support by IBM) to perform the
backup of the sha
Hello,
TSM Client 5.5 is not supported on W2K. Please refer to the link below
to see list of supported OS for versions 5.4 & 5.5
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
admbackup
Sent: Wednesday, April 29, 2009 3:38 PM
To: ADSM-L@VM.MAR
81 matches
Mail list logo