Last Friday, we upgraded our 3584 tape library with an expansion frame. After the
expansion was installed, I loaded 220 new LTO tapes and ran a checkin libvol
TSM tried to use these volumes over the weekend and couldn't read the labels (because
they aren't labelled). Well, I should have
and call it from an admin session...
you can do checkouts the same way...
hope this helps.
Dwight
-Original Message-
From: Peter Ford [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 1:32 PM
To: [EMAIL PROTECTED]
Subject: label/checkin libvolume
Last Friday, we upgraded our 3584
-Original Message-
From: Cook, Dwight E [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 11:58 AM
To: [EMAIL PROTECTED]
Subject: Re: label/checkin libvolume
Well, TSM doesn't want to label them while they are PRIVATE
and TSM doesn't
really know what is going on...
You
]]
Sent: Monday, January 13, 2003 11:58 AM
To: [EMAIL PROTECTED]
Subject: Re: label/checkin libvolume
Well, TSM doesn't want to label them while they are PRIVATE
and TSM doesn't
really know what is going on...
You might be able to do a del vol against them to get them
back to scratch
Can't you just do a checkout with remove=no and then label the tapes?
Jim Sporer
At 01:16 PM 1/13/2003 -0800, you wrote:
-Original Message-
From: Cook, Dwight E [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 11:58 AM
To: [EMAIL PROTECTED]
Subject: Re: label/checkin
You can do a checkout libvol libname volser remove=no then go back to the
label libvol command with the checkin=scratch parameter.
Nick Cassimatis
Today is the tomorrow of yesterday.