Hi Everyone,
I seem to be getting an ANR8485E message sporadically while doing NAS NDMP
backups for 1 particular datamover. It has 3 drives attached to it which are
also shared with another datamover. All 3 drives in question are online and
the paths are online as well. No checkin or label
:
[ADSM-L] ANR8485E: No drives available, can't find root cause
Sent by:
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Hi Everyone,
I seem to be getting an ANR8485E message sporadically while doing NAS NDMP
backups for 1 particular datamover. It has 3 drives attached to it which
are also shared
In case someone might be interested to take and reuse...
Yale University recently decommissioned 4 * IBM 3494 tape libraries
and will recycle them for scrap metal before June 30th, unless some
other institution would like to take and reuse them. The libraries
and 3590 drives were maintained by
, there are nvever more than three drives in use, and q path
and q drive shows all paths on-line, and all drives available.
Stgpools offsite and bigtape, (onsite pool) are assigned to devclass 3590 which has a
mountlimit of four.
I'm confused. It looks like tsm doesn't see available drives all
19:22
To: [EMAIL PROTECTED]
Subject: Tsm server thinks no drives available, there are
Tsm server v5.1.6.2, running on Sun e3500 under solaris 2.8.
Library is ibm 3494 ethernet ethernet connected.
Drives are four 3590b.
Many times this week during offsite reclamation, the process
Programmer
High Performance Computing
SARA Computing Networking Services
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]
On Behalf Of Lee, Gary D.
Sent: woensdag 17 september 2003 19:22
To: [EMAIL PROTECTED]
Subject: Tsm server thinks no drives available
to
be cancelled. This was despite the fact that there were enough drives
available to satisfy the request for the restore.
Could somebody tell me where the server checks for available drives? Could
the problem be caused by a label libvol which was running ( even if I gave
label libv 2 drives there were
** High Priority **
Hi ,
have anybody got erros like ANR8447E no drives currently available in the library.
My backups,background process are aborting because of this problem .
but my 'q drives' 'q path' shows all drives are online .
I could not find fixed answer in ADSM archive mails
:
Sent by: Subject: no drives available
ADSM: Dist
Stor Manager
[EMAIL PROTECTED]
RIST.EDU
03/07/2003
14:24
Please
by: Subject: no drives available
ADSM: Dist
Stor Manager
[EMAIL PROTECTED]
RIST.EDU
03/07/2003
14:24
Please
respond
Hi list,
Does anybody know of a SELECT statement that will show if any drives are
available for use (not in use by another process or session)?
I need this for scripting purposes as I have only two drives in my library,
and while doing reclamation both drives are in use.
Kind regards,
volume: AAE514.
Dwight
-Original Message-
From: Christian Sandfeld [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 19, 2002 6:34 AM
To: [EMAIL PROTECTED]
Subject: SELECT statement to determine if any drives available
Hi list,
Does anybody know of a SELECT statement
select drive_name,drive_state,allocated_to,online from
drives
[EMAIL PROTECTED] 12/19/02 07:34AM
Hi list,
Does anybody know of a SELECT statement that will show if any drives
are
available for use (not in use by another process or session)?
I need this for scripting purposes as I have only
:
|
|Subject: Re: SELECT statement to determine if any drives available
: SELECT statement to determine if any drives available
select drive_name,drive_state,allocated_to,online from
drives
[EMAIL PROTECTED] 12/19/02 07:34AM
Hi list,
Does anybody know of a SELECT statement that will show if any drives
are
available for use (not in use by another process or session
That's interesting - what shows up in your allocated-to
field? (Mine has nothing, even when tapes are mounted to
processes and restores..)
Mine too. Probably just one of those version things again ;-)
By the way, I opened a PMR on the problem of nodes reporting 0.00MB backed
up and others
and restores..)
-Original Message-
From: David E Ehresman [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 19, 2002 9:39 AM
To: [EMAIL PROTECTED]
Subject: Re: SELECT statement to determine if any drives available
select drive_name,drive_state,allocated_to,online from
drives
[EMAIL
My allocated-to field contains either the storage agent name or the tsm
server name when there is a tape mounted in the drive.
David
I get server names in the allocated-to field with tsm server 5.1.1.6.
David
Is there any way to set operational priority of the client.
:Re: No drives available - UPDATE
If its the same or similiar problem I had in converting from
a 3466-C00 (tsm 3) to a 3466-C01(tsm 4) but using the same 3494/3590s
then its because your system thinks the tapes are ONLY capatible in
READ/ONLY mount modes.
Even though you are mounting a tape
Ooops,
Solaris 2.6 is not in the list. It IS supported.
Sorry
Zlatko Krastev
IT Consultant
and generate a 'No tape drives
available' message. It took a little while to piece what was going on,
but after I deleted the vols and checked them back in they have all been
quite useable.
Al Barth
Joe Faracchio [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
03/07/02 12:00 PM
the only one experiencing)
This would cause the library robot when grabbing a dismounted tape - to
call a dismount failed message. When the tape was really dismounted..
I had this 1 particular volume always popping up in the actlog around the
time the No Drives Available message would appear.
It seems
. define drive lib1 drive1 device=/dev/rmt1 element=16 online=yes
7 upd devc atl3590 library=lib1
8. Allter dsm.sys file on client and restore data.
This has worked for 4 servers without a problem.
However, when trying to restore data from a 5th server, I get a No drives
available in library and a mount
Earlier I posted a question regarding a migration problem I was having
while trying to restore to a 3590 with a tape stacker.
I was encountering a no drives availabel while trying to restore.
To overcome this problem, I had to mark the volume as READ ONLY. The
restore went throught without a
If its the same or similiar problem I had in converting from
a 3466-C00 (tsm 3) to a 3466-C01(tsm 4) but using the same 3494/3590s
then its because your system thinks the tapes are ONLY capatible in
READ/ONLY mount modes.
Even though you are mounting a tape for RESTORE if you look closely
you
Good morning,
Since we upgraded our 3590B's to 3590E's, whenever all the drives in the library
are full, we get these errors, under ADSM 3.1, AIX:
02/06/2002 11:13:43 ANR8447E No drives are currently available in library MAGSTOR1.
This causes restore/retrieves to fail, rather than queue,
: Wednesday, February 06, 2002 12:39 PM
To: [EMAIL PROTECTED]
Subject: No Drives Available errors
Good morning,
Since we upgraded our 3590B's to 3590E's, whenever all the drives in the
library
are full, we get these errors, under ADSM 3.1, AIX:
02/06/2002 11:13:43 ANR8447E
PROTECTED]
Subject: No Drives Available errors
Good morning,
Since we upgraded our 3590B's to 3590E's, whenever all the drives in the
library
are full, we get these errors, under ADSM 3.1, AIX:
02/06/2002 11:13:43 ANR8447E No drives are currently available in library
MAGSTOR1
This has been going on since this morning. I don't get it because the drives
are available if I q drive.
Geoff - In my experience, the Query Drive command is an unreliable indicator
of drive health. SHOW LIBRary is more indicative. The mtlib command
is also helpful, on a 3494, to
Geoffrey,
I've seen this several times on my 3494. One of the drives is giving
false status of availability back to TSM. You should be able to
determine the drive by examining the TSM activity log (q actlog) and
looking for which drive has NOT had any successful mount requests. The
cause (at
Hi
I got the same problem a few weeks ago. After updating a TSM 3.1 to 4.13. The
3494 mounted a tape once and then the drives are currently available in library
and ANR8447E.
I deleted the drives from TSM and OS (AIX 4.3.3 .M6 newest ATape and ATLDD ) .
Booting the machine. Drives are available
33 matches
Mail list logo