As I remember you can do in both ways ...
Regards
El 9 jul. 2016 21:09, "Robert Ouzen" escribió:
> Hello All
>
> A quick question about restore db . I f I made the backup db with TSM
> server version 7.1.5.200.
>
> Can I do a restore db if I previously install TSM
Hello All
A quick question about restore db . I f I made the backup db with TSM server
version 7.1.5.200.
Can I do a restore db if I previously install TSM server 7.1.6 ?
Or I need first to install TSM server version 7.1.5.200 , made the restore db
and after it update version to 7.1.6
I have been testing disaster recovery procedures for our TSM 6.2.5.0
servers, which run under zSeries Linux. As far as I can tell, 'dsmserv'
commands with 'restore db' always end with exit status 0, even when there
are errors that prevent a successful database restore, such a
restore db todate=today on=dbdir.file
The process finish successfully and got my DB on the new directories. In the
past I had configured Mirror Log Directory and Archive Failover Log Directory
but from a while I deleted those entries from dsmserv.opt.
Here the q log f=d output configuration I
Thank you all, we4ll consider to upgrade TSM 6.2.3. Meanwhile, we found that if
we run the command setting tsminst1 user the logs are completely recovered, and
TSM starts smoothly:
dsmserv -u tsminst1 -i /home2/tsminst1/tsminst1 restore db todate=11/11/2011
source=dbbackup recoverydir=/tivoli
On Sun, 2011-11-13 at 09:02 -0800, darthlord wrote:
> Hi,
>
> I4m new to TSM 6.2, I4ll appreciate any further assistance to solve some
> issues to RESTORE TSM DB into another server. As we are working into a DRP
> with TSM 6.2. We had been getting some TSM Restore DB erro
On Nov 13, 2011, at 12:02 PM, darthlord wrote:
> ...
> ANR2032E RESTORE DB: Command failed - internal server error detected.
You can always search the TSM Support page
http://www-947.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager
for such error me
assistance to solve some
> issues to RESTORE TSM DB into another server. As we are working into a DRP
> with TSM 6.2. We had been getting some TSM Restore DB error messages, and
> noticed that while restore finished no logs were restored at activelog path.
>
> Maybe we are mis
Hi,
I4m new to TSM 6.2, I4ll appreciate any further assistance to solve some issues
to RESTORE TSM DB into another server. As we are working into a DRP with TSM
6.2. We had been getting some TSM Restore DB error messages, and noticed that
while restore finished no logs were restored at
r" wrote on 01/15/2010
08:07:11 AM:
> [image removed]
>
> SV: Dsmserv Restore DB -k?
>
> Christian Svensson
>
> to:
>
> ADSM-L
>
> 01/15/2010 08:09 AM
>
> Sent by:
>
> "ADSM: Dist Stor Manager"
>
> Please respond to "ADSM:
: ADSM-L@VM.MARIST.EDU
Ämne: Re: Dsmserv Restore DB -k?
Hi Christian ,
See technotes 1205219 and 1143756.
On Windows, each server instances is identified by some registry keys
under HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM\CurrentVersion\Server :
- Server1 key is
HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM
specified" error.
--
Best regards / Cordialement / مع تحياتي
Erwann SIMON
Le 14/01/2010 22:24, Christian Svensson a écrit :
Hi Everyone,
I'm doing a TSM Server Database recovery on a server right now where I have
multiple Server Instance.
When I run dsmserv.exe restore db from the dir
2010 00:48
Till: ADSM-L@VM.MARIST.EDU
Ämne: Re: Dsmserv Restore DB -k?
I ran into that a while ago. It just plain doesn't work like it should.
Got some responses from this list, but lost my test server and never got
around to trying it again:
http://www.mail-archive.com/adsm-l@vm.marist.ed
-supported-platforms
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Grigori
Solonovitch [g.solonovi...@bkme.com]
Skickat: den 15 januari 2010 06:32
Till: ADSM-L@VM.MARIST.EDU
Ämne: Re: Dsmserv Restore DB -k?
How about volume history
...@storserver.com]
Skickat: den 15 januari 2010 00:57
Till: ADSM-L@VM.MARIST.EDU
Ämne: Re: Dsmserv Restore DB -k?
Christian,
I do this frequently and have no problem when I cd to the server2 directory and
run the following:
..\server\dsmserv -k server2 restore db todate=today
During the restore dsmserv uses
How about volume history?
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of Christian
Svensson [christian.svens...@cristie.se]
Sent: Friday, January 15, 2010 12:24 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Dsmserv Restore DB -k?
Hi
Christian,
I do this frequently and have no problem when I cd to the server2 directory and
run the following:
..\server\dsmserv -k server2 restore db todate=today
During the restore dsmserv uses the directory you're in to create registry
entries for the paths to the instance.
Bill S
nsson <
christian.svens...@cristie.se> wrote:
> Hi Everyone,
> I'm doing a TSM Server Database recovery on a server right now where I have
> multiple Server Instance.
> When I run dsmserv.exe restore db from the directory where I have the
> correct dsmserv.opt and dsmserv.dsk
Hi Everyone,
I'm doing a TSM Server Database recovery on a server right now where I have
multiple Server Instance.
When I run dsmserv.exe restore db from the directory where I have the correct
dsmserv.opt and dsmserv.dsk, then some how does TSM try to restore my other
instance that is
"ADSM: Dist Stor Manager" wrote on 08/26/2009
06:34:03 AM:
> [image removed]
>
> tsm for database (sql), restore db into another instance
>
> TSM
>
> to:
>
> ADSM-L
>
> 08/26/2009 06:35 AM
>
> Sent by:
>
> "
hello,!
i can restore sql database to another server and i can also rename it.
is it possible to restore a sql database into another instance on the same
ms sql-server (ms sql 2005, tsm for databse 5.5.2)?
with best regards
stefan savoric
wrote on 05/08/2006
> 04:52:38 PM:
>
> > Wiadomosc przeskanowana programem antywirusowym. Nie znaleziono
wirusow /
> > This message was anti-virus scanned. No viruses were found.
> > This is what I used, but before I used the same restore comman from
> > devclass LTO
> &
> Wiadomosc przeskanowana programem antywirusowym. Nie znaleziono wirusow /
> This message was anti-virus scanned. No viruses were found.
> This is what I used, but before I used the same restore comman from
> devclass LTO
> :
> C:\Program Files\Tivoli\tsm\server>dsmserv
Wiadomosc przeskanowana programem antywirusowym. Nie znaleziono wirusow /
This message was anti-virus scanned. No viruses were found.
This is what I used, but before I used the same restore comman from
devclass LTO
:
C:\Program Files\Tivoli\tsm\server>dsmserv restore db devclass=dbbclass
volum
to
> Glasshouse Technologies, Inc.
>
>
>
>
> From: ADSM: Dist Stor Manager on behalf of Richard Mochnaczewski
> Sent: Mon 5/8/2006 1:28 PM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] Restore DB without effect
>
>
>
> Increa
What command did you use to restore the database?
Orville Lantto
Glasshouse Technologies, Inc.
From: ADSM: Dist Stor Manager on behalf of Richard Mochnaczewski
Sent: Mon 5/8/2006 1:28 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Restore DB without effect
Increase your recovery log. It looks like you did not assign enough space.
Rich
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Szymon Kacprzak
Sent: Monday, May 08, 2006 1:42 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Restore DB without effect
new db and log with enough space for db and log.
I run the restore db from tape (actual db backup) and from disk (earlier db
backup). For both restoration I've the same result:
C:\Program Files\Tivoli\tsm\server>dsmserv
ANR0900I Processing options file C:\Program
Files\Tivoli\tsm\server\dsm
etting activity on the library console when we issue other dsmserv
commands. According to the documentation, we should be able to either
use a Library of type Manual or SCSI. Ours is currently set to SCSI.
After issuing: dsmserv restore db devclass=ltoclass1 vol=56L1
we end up w
On Nov 21, 2005, at 2:32 PM, pj wrote:
ANRD tb.c(880): ThreadId<0> Column count mismatch for table
MMS.Libraries -
expected 26, found 28
We don't have the needed context of the db restoral, but the above
message suggests to me that the db backup was performed on a rather
different instance
Hey all,
I'm trying to recover a TSM Database. I can restore it fine without any
problems, when I go to start the server up after recovery, the server stops
and the only thing i've been able to pick out of it is that it wants me to
run dsmserv ugpradedb. I do that, and the server starts, but not a
AIX 5.2
TSM 5.1.8.0
Database crashed - Recovery log maxed out and full (over 12 MB - can't
extend). While working with support, attempted to create a second log
and now get:
ANR0259E-unable to read complete restart/checkpoint information from any
database or recovery log volume
I have ab
;ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
10/23/04 04:19 PM
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Antwort: Re: Antwort: Re: cannot restore tsm database (dsmserve restore
db)!!! Please Help! [Virus checked
OTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Antwort: Re: Antwort: Re: cannot restore tsm database (dsmserve restore
db)!!! Please Help! [Virus checked]
thanks!
I check the path (for example /mgnt/save_data/adsm_db/full_bak) and find
that was on the crashed disk. Now I creadte the dire
estore tsm database (dsmserve restore db)!!!
"ADSM: Dist StorPlease Help! [Virus checked]
Manager"
<[EMAIL PROTECTED]
DU>
23.10.2004 23:14
Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Antwort: Re: cannot restore tsm database (dsmserve restore db)!!! Please
Help! [Virus checked]
Hi,
thanks for your answer.
Yes in the dsmserv file stands the path to the old logs. But this logs I
craete new in the
Hi,
thanks for your answer.
Yes in the dsmserv file stands the path to the old logs. But this logs I
craete new in the same path!
Now I try to restore to a point in time.
Now I get this errors (additional my configuration):
# dsmserv restore db todate=10/22/2004
ANR7800I DSMSERV generated at
PROTECTED]>
10/23/04 01:38 PM
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
cannot restore tsm database (dsmserve restore db)!!! Please Help!
[Virus checked]
Hi,
I have a great problem to restore my TSM Database.
I don't understand why the server shows by the restore to the logs. But now
I format the log-vol new and restart the "dsmserv restore db" and get now
this error:
# dsmserv restore db preview=yes
ANR7800I DSMSERV generated at 16:53:28 on Oct 16 2003.
Tivoli Storage Manager
dsmfmt -log path size
But I cannot start the server. I think this is o.k. because the logs are
new and empty. So I start a
dsmserv restore db
and get the following errors:
# dsmserv restore db preview=yes
ANR7800I DSMSERV generated at 16:53:28 on Oct 16 2003.
Tivoli Storage Manager for AIX-RS/6000
Of Lisa Laughlin
> Sent: Monday, August 16, 2004 11:32 AM
> To: [EMAIL PROTECTED]
> Subject: restore db to new host (LPAR) and ESS dsmfmt'd stg volumes?
>
> Hello all,
>
> I am wondering if anyone has any experience moving TSM from one AIX
> host to
> another, both
[mailto:[EMAIL PROTECTED]
Sent: Monday, August 16, 2004 10:57 AM
To: [EMAIL PROTECTED]
Subject: Re: restore db to new host (LPAR) and ESS dsmfmt'd stg volumes?
Hi Lisa
You could do this :
exportvg
unconfigure vpaths on old system
configure vpaths on new system
importvg
All your files should be
Services
Tel.: (514) 964-2795
[EMAIL PROTECTED]
Lisa Laughlin <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
2004-08-16 12:32
Please respond to
"ADSM: Dist Stor Manager"
To
[EMAIL PROTECTED]
cc
Subject
restore db to new host (LP
Hello all,
I am wondering if anyone has any experience moving TSM from one AIX host to
another, both of which are attached to an ESS. My basic question is
whether it is possible to move the vpaths from the one host and to the
other & be able to retain the dsmfmt'd storage pool volumes in the
reas
store I do a second restore with the "difffull"
parameter
> instead of "full" ?
> Thanks
> Yiannakis
>
>
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
> Del Hoobler
> Sent: 24 March 2004 15:33
>
ED]
Subject: Re: TDP for MS SQL - Restore DB
Yiannakis,
Saturday.
If you want to restore it to a later point,
you will need to specify /RECOVERY=NO on the
restore of the full and then restore the last
differential backup with /RECOVERY=YES (def
Yiannakis,
Saturday.
If you want to restore it to a later point,
you will need to specify /RECOVERY=NO on the
restore of the full and then restore the last
differential backup with /RECOVERY=YES (default).
Thanks,
Del
"ADSM: Dist Stor Manage
Hi,
I have the following schedules for a SQL dbase:
Saturdays - full backup of dbase
Weekdays - difffull backup of dbase
I wanted to restore the dbase on Wednesday to another server, so I used the
command line as follows:
tdpsqlc restore ChequeEnquiry full /relocate=ChequeEnquiryuiry_Data
/to=H:\
ts .
The architectures have to be the same for Restore DB to assuredly work.
Richard Sims
We have had an issue arise and we need to know if it is possible to restore
a TSM database backup that was taken on a Solaris 8 system onto a mainframe
environment.
Anyone ever tried that?
Dale Jolliff
Data Administration Team
Backup and Recovery
>anrd icstrame.c bla bla invalid record header found in input stream,
> magic=0087
Koen - When restoring a TSM server, it is starting out from nothing and needs
to be accurately told what its devices (devclasses) are, which is the
role of the devconfig file. Check that the
riginal Message-
From: Koen Willems [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 21, 2003 14:39
To: [EMAIL PROTECTED]
Subject: dsmserv restore db error
Dear listers,
Getting some strange behavior when I want to restore a db backup.
After formating the log and mounting the database ta
Dear listers,
Getting some strange behavior when I want to restore a db backup.
After formating the log and mounting the database tape dsmserv gives me the
following error.
anrd icstrame.c bla bla invalid record header found in input stream,
magic=0087
Anyone seent - solved this.
I am ru
Looks like it may be a 3494 librar, in which case you'll have t edit the
devconfig file and make it libt=manual and mount the tape in the flashing
drive. For some reason the 3494 isn't supported at some/most levels of the
server for restore db processing. Found out the hard way at
If your libtype is set to manual in your devconfig file, check that
SHARED=NO is not part of the DEFINE LIBR statement..
Clarence Beukes
Advisory IT Specialist - Tivoli Certified Consultant
Geomar SSO Mid Range and Application Support Discipline
Location: IBM Park Sandton, IA2G
Tel: +27 (0)
>I am trying to run a 'dsmserv restore db volume=030265
>devclass=359CLASS1' command and when I run it I get the following error:
>
>ANR0200I Recovery Log assigned capacity is 3600 megabytes.
>ANR0201I Database assigned capacity is 12004 megabytes.
><< Mes
All,
I am trying to run a 'dsmserv restore db volume=030265
devclass=359CLASS1' command and when I run it I get the following error:
ANR0200I Recovery Log assigned capacity is 3600 megabytes.
ANR0201I Database assigned capacity is 12004 megabytes.
<< Message number 8476 n
Curtis,
yesterday we succesfuly restored DB from STK9310 through manual library
setting as you wrote. It seems like it is only way to use Gresham controled
library in TSM server standalone mode for restore DB.
Many thanks.
Tomas
> -Original Message-
> From: ADSM: Dist Stor M
?
Thanks
Tomas
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]
Behalf Of Curtis Stewart
Sent: Monday, June 09, 2003 11:36 PM
To: [EMAIL PROTECTED]
Subject: Re: Restore DB problem
Is your library set up as "manual" in the devconfig? In my experience
t; Behalf Of Curtis Stewart
> Sent: Monday, June 09, 2003 11:36 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Restore DB problem
>
>
> Is your library set up as "manual" in the devconfig? In my experience,
> using an external library requires this setup for the DB res
EMAIL PROTECTED]
> Subject: Re: Restore DB problem
>
>
> I got the same error when I was doing a DB restore for one of our W2K
> Library clients. The issues was I had define the device name using the
> /dev/mt0.0.0.n. In W2K the device name does not need the (/dev), as tha
: "ADSM: Subject: Re: Restore DB problem
Dist Stor Manager"
<[EMAIL PROTECTED]
EDU>
09/06/2003 13:43
Please respond to
"ADSM: Dist Stor
SM: Subject: Re: Restore DB problem
Dist Stor Manager"
With best regards
Tomas
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
> Henschell, John
> Sent: Monday, June 09, 2003 2:43 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Restore DB problem
>
>
> Tomas,
>
> I saw these sa
AIL PROTECTED]
Subject: Restore DB problem
Hi all,
I have a problem with restore DB from external library STK9310 PowderHorn
managed by Gresham EDT on W2000 TSM server. This is restore of TSM server on
the same machine with volume history file and devconfig file enabled. I did
it many times successfuly w
Hi all,
I have a problem with restore DB from external library STK9310 PowderHorn
managed by Gresham EDT on W2000 TSM server. This is restore of TSM server on
the same machine with volume history file and devconfig file enabled. I did
it many times successfuly with other libraries (almost local
Thanks to everyone for thier responses and help.
Due to the version of TSM we're running (415) I did have to change my decvonfig to
MANUAL - afterwhich point the db restore worked like a champ.
I was able to restore the TSM database back to the 27th, then restore my lost
filesystem data, and th
volhist and config,
and,
after having restored the 1/27 DB,
disable sessions
set all storage pools to readonly,
enable sessions and do the restore.
Then restore of latest DB.
It is much work and still some risk,
check whether it is worth the results.
If you have never performed restore DB
happened if you have REUSEDELAY set appropriately on the storage pool.
Good luck!
-Original Message-
From: Theresa Sarver [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 29, 2003 3:21 PM
To: [EMAIL PROTECTED]
Subject: Restore db - forward in time?
Does anyone know can I restore my TSM
Does anyone know can I restore my TSM database "back" to 1/27 to get some files - then
restore the database "forward" to a current db backup (1/29) so that I don't lose 2
days worth of backups?
Thanks;
Theresa
using a DR server if you have one, and restore to it.
Other ideas? Are these half baked (they are just brain storming)
> -Original Message-
> From: Theresa Sarver [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, January 29, 2003 2:21 PM
> To: [EMAIL PROTECTED]
> Subject:
Thanks to all the responded to this. I am right now running a dry run of
the dsmserver restore db, to migrate my TSM db from a 7025-F50 to a
7026-6H1. Once atldd/Atape are installed, and the Library Manager Control
Point is configured, dsmserv can talk to the 3494, and mount my db tape.
I did
: [EMAIL PROTECTED]
Subject: Re: 3494 and dsmserv restore db
As a matter of fact, I had to do this last Friday to restore a Windows TSM
server. I did exactly as described below in the support item Lloyd posted.
You edit a copy of your devconfig file as below.
Then when you run dsmserv restore db
90-B1A's)
> that the restore db works JUST FINE !
> You don't have to do anything funny...
So dsmserv will be able to use the 3494 to mount the volume! Excellant!
...using AIX 5.1ML03 with TSM 4.2.2.0, but my 3494-L is a 3494-L14 (it
contains the maintframe's escon attached dri
> I can say that from an RS/6000 AIX server using a 3494-L12 (with 3590-B1A's)
> that the restore db works JUST FINE !
> You don't have to do anything funny...
So dsmserv will be able to use the 3494 to mount the volume! Excellant!
...using AIX 5.1ML03 with TSM 4.2.2.0, but
As a matter of fact, I had to do this last Friday to restore a Windows TSM
server.
I did exactly as described below in the support item Lloyd posted.
You edit a copy of your devconfig file as below.
Then when you run dsmserv restore db, the first thing you get is a MOUNT
message.
Put your 3494 in
Steve,
Attached (at the end) is a snippet from a howto on IBM's support site that
you may want to look over...
-Lloyd
On Mon, 27 Jan 2003 14:04:43 -0500
Steve Roder <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> According to the doc., dsmserv restore db only supports manual
Hi All,
According to the doc., dsmserv restore db only supports manual and
scsi libraries. Has anyone on this list restored a db via a 3590 drive
inside a 3494? Since the 3494 is not libtype=scsi, I am thinking that I
will have to put my 3494 into pause or manual mode, and fake TSM into
I can say that from an RS/6000 AIX server using a 3494-L12 (with 3590-B1A's)
that the restore db works JUST FINE !
You don't have to do anything funny...
Dwight
-Original Message-
From: Steve Roder [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 27, 2003 1:05 PM
To: [EMAIL
Hi *SM'ers
Due to a severe SSA crash problem where several of our disks crashed, I have to
rebuild our TSM server, but when issuing the "restore db" command, I get the following
output :
ANR7800I DSMSERV generated at 18:02:11 on Jun 19 2000.
Tivoli Storage Manager for AIX-RS
t some
pointers) Thanks!.
--Justin
PAC Brion Arnaud
cc:
Sent by: "ADSM: Subject: Restore db problem ...
Dist Stor
Manager"
f the Federal Reserve System
Mario Behring
cc:
Sent by: Subject: Help needed on restore db
"ADSM: Dist
Stor Manager"
&l
TSM people,
I am trying to perform a dsmserv restore db on a brand new TSM Server
4.2.1 running on a Windows 2000 Server machine. This db is stored on a
tape automated library (IBM 3590) and was backed up from a TSM 4.1.0
Server on another machine, also W2000.
Below is what appears at the DOS
dsmserv restore db also worked for me with automated libraries. The manual
states that "dsmserv loaddb" works only with manual libraries, but if you
have a valid devconfig file, dsmserv restore db should work ok.
Stefano
"Cook, Dwight
Huh
dsmserv restore db dev=3590devc vol=ABC123 commit=yes
has always worked just dandy for me with a 3494 & 3590's
I'm up to 4.2.2.1 and it has worked OK since ADSM 2.x
Dwight
-Original Message-
From: Kent Monthei [mailto:[EMAIL PROTECTED]]
Sent: Monday
In V5R1, it doesn't matter, but for earlier versions, I always keep a config
file that includes a manual library. I've used "mtlib" to actually mount the
volumes.
Quoting Kent Monthei <[EMAIL PROTECTED]>:
> TSM documentation states somewhere that DSMSERV ut
TSM documentation states somewhere that DSMSERV utilities (RESTORE DB ?)
only support manual libraries. If I want to use a 3494 library tape for
the restore, what steps must I take to load the DB Backup tape into a
drive before I issue the DSMSERV RESTORE DB command ? Do I need to put
the
, 2002 5:37 PM
To: [EMAIL PROTECTED]
Subject: URGENT ISSUE / BACKUP DB fails with error: "ANRD ic.c(329):
Zero bit count mismatch for SMP page addr 738304; Zero Bits =105,
HeaderZeroBits = 0." - is there a way to fix or recover from this without
doing a RESTORE DB?
Solaris 2.6 /
Solaris 2.6 / TSM Server 4.1.2.12. A few days ago we experienced a
spontaneous crash/reboot during a TSM BACKUP DB operation. Following the
reboot, our TSM Server software came up normally and we repeated the
BACKUP DB operation, which reported successful completion. Shortly
afterward, we did a
Hi,
I run de dsmserv restore db.
this is the output off the command
root@adsm1:/usr/tivoli/tsm/server/bin>dsmserv restore db
ANR7800I DSMSERV generated at 15:58:50 on Nov 20 2001.
Tivoli Storage Manager for AIX-RS/6000
Version 4, Release 1, Level 5.0
Licensed Materials - Property of IBM
5
The key is the device config file. The devclass is defined there with the
directory path. Volume name is only the file name part.
Example: to restore DB from the file c:\tsmfiles\dev_file\12345678.DBB you
need following
dsmserv restore db dev=file vol=12345678.DBB
and devclass named FILE with
If there is only one volume use COMMIT=Y . If you have multiple volumes use
COMMIT=N on all but the last volume.
DSMSERV RESTORE DB DEV=device_class_name VOL=volume_name COMMIT=Y
Regards,
Ray Pratts
Justin Bleistein wrote:
> Could someone please send me the syntax of the "dsmserv
Could someone please send me the syntax of the "dsmserv restore db" command
to restore a backup of a database which was written to a file, in a file
devclass? Thanks!.
Hi TSMers.
I became a victim of the RESTORE DB problem from an IBM3494 library with AIX
TSM 4.2.1.9.
It came as a surprise because with TSM 3.7.2 we had to do numerous DB
restores for real with the Activity Log full to the brim type problem.
I guess I should pay more attention to the postings
a further APAR to the problem:
APAR Identifier .. IC31865 Last Changed 01/11/09
UNABLE TO USE 3494 LIBRARY FOR RESTORE DB. HAVE TO DEFINE DRIVE
WITHIN 3494 AS TYPE MANUAL TO COMPLETE DB RESTORE.
Symptom .. IN INCORROUT Status ... CLOSED PER
Severity
I had the same problem last week and it turned out that my cable connection
from the exabyte to the server was not seeded correctly. Once I connected
correctly it my restore db worked for me.
Hope this helps.
Thank You,
Hana Taha
Systems Analyst
Parker Drilling
1401 Enclave Suite 600
Houston
devconfig file using the DEFINE DEVCLASS, DEFINE
LIBRARY and DEFINE DRIVE commands listed above.
2. Attempt a database restore using the 3590CLASS device
class (i.e. dsmserv restore db devclass=3590CLASS)
.
This problem has been seen on AIX and Solaris with the TSM 3.7.x
and 4.1.x
We are running 4.2.1.9. For 3494 libraries it is
necessary to define a manual library.
Best regards,
Kirsten
-Original Message-
From: Ilja G. Coolen [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 15, 2002 2:40 PM
To: [EMAIL PROTECTED]
Subject: Re: AW: dsmserv restore db problem with
ebruary 15, 2002 2:42 PM
To: [EMAIL PROTECTED]
Subject: Re: AW: dsmserv restore db problem with 3494 libr
Hi Kirsten
Have you had a look at your devcnfg file? Because the problem that is
described in your mail looks like it cannot define the 3590 drive. This is
probably because the devices in y
cc:
Sent by: "ADSM: Dist Subject: Re: AW: dsmserv restore
db
Stor Manager" problem with 3494 libr
1 - 100 of 139 matches
Mail list logo
